Set of three colour photographs of Museums Australia/Arts Victoria undertaking a cataloguing training workshop in the meal room at Ballarat depot. Taken mid to early 4th quarter 1994, as everyone is wearing jumpers. On AGFA paper. Received by BTM 28/4/1995. No reference to Workshop in Fares Please! 2001.1 - Richard Gilbert, Neville Gower, ? from MA, Warren Doubleday .2 - Ditto with Caroline Carter .3 - ditto working on papers. See Cataloguing worksheet for note from Caroline Carter. museums australia, cataloguing kit, arts victoria

Hand-made child's doll's house. Built by Mrs Yvonne Fitzmaurice and finished in 1979. This house was built as a 1:12 scale and is a model of a Californian house called Peppercorn farm. House was built by Yvonne and her family and took a period of three years. A lot of the furniture is handmade and the rest is collected from various shops. Catalogued books, manuals, repair kits etc used when building the house.The white painted verandah has a brass plate beside the door with the name Susan Fitzmaurice. In front of the door is a door mat and the veranda has a white hanging seat and a timber flower box with flowers."Susan Fitzmaurice" name on front of building. Date on plaque on top of front wall. Contents: - flower box with flowers, wooden swing, door mat.

Handmade and imported furniture for doll's house made by Yvonne Fitzmaurice for the daughter, Susan, on her birthday.Hand-made child's doll's house. Built by Mrs Yvonne Fitzmaurice and finished in 1979. This house was built as a 1:12 scale and is a model of a Californian house called Peppercorn farm. House was built by Yvonne and her family and took a period of three years. A lot of the furniture is handmade and the rest is collected from various shops. Catalogued books, manuals, repair kits etc used when building the house.house, dolls, tongue depressors

Hand-made child's doll's house. Built by Mrs Yvonne Fitzmaurice and finished in 1979. This house was built as a 1:12 scale and is a model of a Californian house called Peppercorn farm. House was built by Yvonne and her family and took a period of three years. A lot of the furniture is handmade and the rest is collected from various shops. Catalogued books, manuals, repair kits etc used when building the house. house, dolls

Hand-made child's doll's house. Built by Mrs Yvonne Fitzmaurice and finished in 1979. This house was built as a 1:12 scale and is a model of a Californian house called Peppercorn farm. House was built by Yvonne and her family and took a period of three years. A lot of the furniture is handmade and the rest is collected from various shops. Catalogued books, manuals, repair kits etc used when building the house.house, dolls

Hand-made child's doll's house. Built by Mrs Yvonne Fitzmaurice and finished in 1979. This house was built as a 1:12 scale and is a model of a Californian house called Peppercorn farm. House was built by Yvonne and her family and took a period of three years. A lot of the furniture is handmade and the rest is collected from various shops. Catalogued books, manuals, repair kits etc used when building the house.house, dolls

Part of the "Kevin John Herdman", No.397661 Collection. See Catalogue No. 5942P for details of his service record.Green coloured canvas bag closed with heavy duty plastic zipper. Two handles made from thick dark green canvas. Each is attached and reinforced with Khaki coloured stitching. A clear plastic pocket is sewn onto one side to house a name card. Below this is a pocket closed in a plastic zipper. On the inside of the bag are two large canvas pockets.Handwritten in black on outside above the clear plastic pocket "HERDMAN".equipment, kitbag, kevin john herdman

Part of the Kevin John HERDMAN, No. 397661 Collection. See catalogue No. 5942P for details of his service record. "D" handle used to close a kit bag. The eyelets on the bag are threaded along the straight part. It can then be locked using a padlock through the small loop on the end of the curved sections.Lockable metal D-ring handle for kit bag. Curved section and straight part are hinged. Loop on the end of the curved section fits through a slot in the straight part.d handle, kevin john herdman

Part of the Kevin John Herdman No. 397661 Collection. See Catalogue No. 5942P for details of his service record.Two metal kit bag handles, one oval shaped and one U shaped. 1. Metal (silver plated cast) oval shaped handle with rectangular holes on each end for attachment to a bag. 2. Metal (silver plated cast) “U” shaped handle with rectangular holes on each end for attachment to a bag.kevin john herdman, kit bag handle, equipment

Pamphlets enclosed are old eg. when flourless recipes were a novelty, when Victa lawnmowers and steam irons were new and when bottling fruit was done using Fowler's bottling kits. Families in the Kiewa Valley cooked at home as access to eating out wasn't available locally. Items that made living easier were becoming more common.Orange plastic with clear front cover with 7 clear sleeves / pages including books. Includes: Butterless Recipes booklet; Recipe book with missing pages; Cakes, Buns and Biscuits 1956 book; Steam Iron & Victa 2-stroke pamphlets; Gas Home Service Recipes; Victa Mower catalogue; Fowler's method of Bottling Fruits and Vegetables book.kiewa valley, cooking, ironing, mowing

Machetes similar to this example were issued as part of the USAAF emergency survival kits for B-2 and B-4 crew. This item was brought back from Korea by Flight Lieutenant Ian A. Lyons. Part of the Flight Lieutenant Ian A. (Joe) Lyons MBE Collection. See catalogue No 5374P for his service record..1) Machete with short slightly curved single-edged folding blade. Black riveted bakelite handle fitted with a thumb operated lock which secures the blade when opened. .2) Black metal detachable blade guard..1) Stamped on blade but partially obscured by corrosion: 'Ca?augus U.S.A.'machete, weapons, edged weapons, us army air force

Since 1895, Hobbies Ltd have been supplying model makers and enthusiasts throughout the world with a wide range of quality model kits, accessories, tools, components and handbooks. The Hobbies Company began life in Dereham, Norfolk in 1881 with a London Office opened later (1922) at 65 New Oxford Street, WC1. In 1895 Hobbies began supplying model makers with their products and in 1897 were incorporated into a Public company. In 1922 at a British Industries Fair the company had a stand advertising their products as "The All-British Firm with a World reputation". Fretwork Outfits. Fretwork Machines. Carpentry Outfits. Strip work Outfits. Also manufactures of Fretwork Tools and Benches, Wood, Circular Saws, Lathes, Picture Framing Outfits, Tools, etc. In 1947 the company had expanded and was still making tools and materials for the amateur craftsman in wood. They had acquired a reputation as manufacturers of quality Fretwork Outfits, Tools, Treadle Machines, Model Maker's Tool Kits. The company also publishers of ‘Hobbies Weekly magazine’ and also sold plans for fretwork, model making and wooden toys. In 1961 they were still manufacturers and retailers of craft tools and materials, timber merchants, light engineers and Government contractors with around 500 employees. A vintage tool made for hobbyists and distributed throughout the world by a British company that is still in existence today. The item is significant as it catalogues the manufactures history at a specific time in the company's development.Foot operated treadle Fret saw called "GEM" subject item is a short saw , the stand in the background is the base for a Delta Q3 model scroll saw. Gem inscription cast into the cast iron frameworkflagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, saw, treadle saw, fret saw, pedal saw, the gem, tool, hobbies ltd, treadle, foot operated

This music stand set of shelves is one of many 19th century items of furniture, linen and crockery donated to Flagstaff Hill Maritime Village by, Vera and Aurelin Giles. The items are associated with the Giles Family and are known as the “Giles Collection”. Many of the items of furniture, linen and crockery in the Lighthouse Keeper’s Cottage were donated by Vera and Aurelin Giles and mostly came from the simple home of Vera’s parents-in-law, Henry Giles and his wife Mary Jane (nee Freckleton) whose photos are in the parlour. They married in 1880. Henry, born at Tower Hill in 1858, was a labourer on the construction of the Breakwater before leaving in 1895 to build bridges in N.S.W. for about seven years. Mary Jane was born in 1860 at Cooramook. She attended Mailor’s Flat State School where she was also a student teacher before, as family legend has it, she became a governess at “Injemiara” where her grandfather, Francis Freckleton, once owned land. Henry and Mary’s family of six, some of whom were born at Mailor’s Flat and later children at Wangoom, lived with their parents at Wangoom and Purnim west, where Henry died in 1933 and Mary Jane in 1940. THE SHELVES During the years 1869-1935 there were well over 250 registered bamboo furniture producers in Britain. The earliest recorded firm was Hubert Bill of 14 Little Camden St, London N.W., who claimed to have been established in (1869 the first bamboo furniture maker), while Daniel Jacobs & Sons of Hackney Road, London, were still in business in 1915, after 45 years of production. Design, quality, price and methods of construction were fairly consistent throughout the whole period, but it was the imaginative and often eccentric choice of subject matter that marked the differentiation between the various firms. While most produced standard tables, stands and fire-screens, the more adventurous offered for sale items such as Corner shelve units, charcoal barbecue grills and musical tea tables. Shelves were often covered with embossed leather paper designs, at first imported from Japan and then later produced in England. Some firms incorporated the knobbly roots of the bamboo stems into their designs, generally to form feet. Occasionally handles to drawers and cupboards were made with these roots although they were more commonly carved as imitations. Handles were mostly of cheap metal or brass. The ends of the bamboo canes were capped with stamped metal or turned bone, ivory or wooden discs. Methods of construction fell into three categories. First and most common is that of pegging. Bamboo stems being hollow, thick dowels can easily be glued into the joints. Some firms farmed out this work of `plugging' the ends of the canes to part-time workers at home. The second method, that of pinning, was far less satisfactory as bamboo tends to split lengthwise and therefore the jointed pieces eventually disintegrated. The most efficient method was that patented in 1888 (patent No 2383) by the firm of W. F. Needham in Birmingham. It consisted of metal shoes and covers for all joints which were made by wrapping a metal strip around the stems and soldering the overlapping ends. Some joints were further strengthened by a small pin or screw. Needham was by far the largest and most successful manufacturer and their individual and superior method of construction undoubtedly gained them their reputation. A. Englander & Searle of 34 Gt Eastern St and 31 Mare St, Hackney, London, were a firm particularly concerned with methods of construction. Although they seem to have entered the bamboo furniture market at a comparatively late date, about 1898, they produced inexpensive bamboo, aimed particularly at the export trade. The company stated in their catalogue that bamboo furniture “can be exported in one piece or it can be exported in pieces and put together again. The fixing up is much facilitated by a system of marking and numbering. Further, no glue is required for putting together as the screw system only is applied”. This method of construction best fits the Etagere in the Flagstaff collection and it is believed to have been made by A Englander & Searle, exported in a knock down form to Australia, purchased in kit form from a dealer hear and put together by the owner. The Etagere is a significant item as it highlight furniture fashion of the late Victorian era. This item was highly sort after in its time and although mass produced, not many examples remain, so this example is a valuable addition to the Flagstaff collection. It is believed that the construction method used is by a notable and respected maker of bamboo furniture and that its production was aimed at the export market and probably came to Australia in kit form.Bamboo shelves: decorative free standing Etagere comprising three large shelves and one small shelf. Shelves are made of wood used to store either orange or bacon boxes (as there are no knots in the wood, imported from South America and cheap to recycle). Shelves are covered with embossed leather paper. Frame is made from tortoise shell bamboo (brown lacquer applied to simulate tortoise shell appearance). Ends of bamboo canes are covered with metal shoes and fixed with a pin. Other bamboo joints are fixed with round head steel screws. This item is part of the Giles Collection.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bamboo shelves, bamboo etagere, victorian furniture, furniture, bamboo furniture, embossed leather paper, simulated bamboo, tortise shell, a englander & searle, giles collection, henry giles, tower hill, cooramook, warrnambool breakwater, mailor’s flat, wangoom, 19th century furniture

Donated by Dr Lorna Lloyd-Green before 1997 (according to hard copy catalogue record by Helen Johnson.)Surgical auroscope kit with attachments, in black storage box. Manufacturer's label inside box reads 'Gowllands'. Box is lined with purple satin. Kit consists of base handle, three ophthalmoscopic attachments and a gauge.

Two red covered auction catalogues for an auction on account of the State Rivers & Water Supply Commission on the 22nd to 25th November, 1954 (inclusive) held at the Big Eildon Project, Eildon, Victoria. Lots sold include Machinery, plant, stores and equipment, Saw Milling Plant, corr. Iron and timber buildings, 5 timber residences, 73 partly completed weatherboard 4 roomed flats, extensive collection of plumbers equipment, building materials, mess equipment, sawn timber, scrap, tools, kitchen and bathroom fittings, electrical equipment and costly spares and accessories. Catalogue has a Locality Plan of Eildon, photo, locality and description of the Eildon Sawmill. Photos of completed houses, incomplete flats and plan showing layout of flat unit, photo of flat block (Completed). Also Building Kits - Designs and Component Lists.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - big eildon project, state rivers & water supply commission, j h curnow & son pty ltd, eildon sawmill, prahran telegraph printing co

Historical information Sarah Coventry Pty. Ltd. was a North American jewellery company that was established in 1949 by the Stuart family as part of Emmons Jewelry, Inc. It began operations in England and Australia in 1968, and in Australia it moved from Carlton in Melbourne to Wodonga in 1969. The premises were originally on High St. in Wodonga, but a new warehouse was built in Melbourne Rd. later in 1969. It was a direct selling jewellery business using a party-plan model similar to Tupperware and Avon. The sales reps or 'Hostesses' were provided with jewellery samples in demonstration kits, which they displayed at jewellery parties in their homes. The designs for jewellery such as brooches, necklaces, earrings, chokers and bracelets were purchased from freelance designers and jewellery manufacturers rather than in-house designers. In 1979 Sarah Coventry Pty. Ltd. in Wodonga was bought by three Australian businessmen, including Wodonga local Jim Sawyer, and continued to sell jewellery under the name "Sar*gem Pty. Ltd”, for several more years in the 1980s, along with a new range of fashion jewellery, Affinity. This catalogue was produced by Sar*gem Pty Ltd in 1982As part of the Sarah Coventry collection, the catalogue has local significance connected to the decentralised commercial development of regional centres such as Wodonga in NE Victoria, as well as national and international significance from the perspective of social and economic developments for women after World War II. The direct selling party-plan business model Sarah Coventry was based on is also considered the first of its kind for jewellery. A coloured catalogue promoting the Affinity Jewellery line released in 1982. The back cover features a fundraising campaign for the Guide Dog Association. Business contact details on the back cover use the company name "Sar*Gem Pty Ltd", Hume Highway Wodonga.sarah coventry, sarah coventry wodonga, sarah coventry affinity

A photo from a newsletter from September 1953. The photo shows the Footscray boys receiving certificates and badges from the President of Legacy, Legatee S Nevile. The article says the group offers boys the chance of forming lasting friendships with other Junior Legatees, and evening of healthful exercise, games, basketball, etc under the guidance of a fully qualified and capable physical education instructor. Gymnasium kit and free milk are provided for each boy and during the year other interests are available, such as picture nights, pie nights, Christmas parties and outing to Luna Park etc. The Footscray Class was in the Drill Hall, at the corner of Barkly and Gordon Streets Footscray at 7.30 on Friday nights. Individual photos being catalogued to record detail about each one.The newsletter outlining news of Junior Legatee activities with mentions of boys by name.Black and white photo of the Footscray boys with the president in a newsletter in September 1953.junior legatees, boys classes

Denis Gibbons (1937 – 2011) Trained with the Australian Army, before travelling to Vietnam in January 1966, Denis stayed with the 1st Australian Task Force in Nui Dat working as a photographer. For almost five years Gibbons toured with nine Australian infantry battalions, posting compelling war images from within many combat zones before being flown out in late November 1970 after sustaining injuries. The images held within the National Vietnam Veterans Museum make up the Gibbons Collection. A black and white photograph of WO2 Brian Quee, the Squandron Sergeant Major, assisted by 2Lt Mike Meehan of 161 (Indep) Recce Flight, attempt to fathom the complexities of a Midwifery Replacement Kit watched by local village children during a Medcap at Xuyen Mocphotograph, wo2 brian quee, 2lt mike meehan, 161 recon flt, medical, xuyen moc, gibbons collection catalogue, vietnamese children, medcap, squadron sergeant major, midwifery kit, denis gibbons

This kit contains a knife, used to cut open a snake bite wound, and potassium permanganate crystals, known as Condy's Crystals, that were rubbed into the wound to absorb the infected blood. It was once believed that cutting open the wound, removing the venom by suction and then applying a tourniquet would be the most effective treatment but it has since been proven that this method has little effect, and can cause more damage and harmful infection than the snake venom. This type of treatment was popular in the early 20th century and kits like these would be common in travel bags and household first aid. It wasn’t until the 1970s that the current method of pressure/immobilisation was introduced.Small tubular wooden container with removal ends, end with flat end encloses a metal lancet, end with rounded end contains a black powder. The items name and instructions are printed in black ink on a white lable on the coverOn label: Lauder Brunton/snakebite/remedy/directions for use: First place ligature around the limp above the wound. Second make a small incision through the wound and rub with the potassium permanganate crystals. Moisten. Obtain services of doctor at once.' Previous catalogue number on a small white stickersnake bite, first aid

Illustrated book. Front cover has a coloured black and white photograph of Kit McNaughton in nurse's uniform seated alongside soldiers. Book title is printed in golden-brown and white ink on the front cover along with the authors name (white ink) Spine and back cover have a golden-brown background. Abbreviated title printed in white and black ink on spine, along with the authors name in white ink. Same coloured photo of Kit McNaughton is printed at top of spine. Publishers mark is printed in white ink on a black background at base of spine. The back cover has a summary of the book along with three black and white photographs: Kit McNaughton and another nurse standing behind two soldiers in hospital beds, the photograph from which the image on the front cover was taken, and a photograph of Kit McNaughton aged 16non-fictionThis book is based upon the previously unpublished diaries of army nurse Kit Mcnaughton, who embarked on the troopship Orsova in 1915, tracing her journey through the war from Egypt (where she nursed Gallipoli veterans), Lemnos Island and then to France and the Somme. Kit finished active service as Australia's first plastic surgery nurse, assisting medical pioneers in this field as they repaired the shattered faces of Australian soldiersworld war 1914-1918, nurses, nursing

Part of the Kevin John Herdman, No. 397661, Collection. See Catalogue No. 5942P for details of his service record. Commonly called a "Housewife".Khaki coloured roll up style sewing kit with fawn coloured tape to secure it closed. Inside has one and one buttoned pocket. Item contains needles, safety pins, various cottons and a thimble. Button pocket secured with a brown Bakelite button. White manufacturers label sewn on inside.Printed in black on white manufacturers label; "R.G.C.F., VIC, 1977 (upwards arrow) 8315-66-013-0931", No. Name. Handwritten in black on label: "398130, LIVINGSTON"accessory, sewing, housewife, kevin john herdman

During the years 1869-1935, there were well over 250 registered bamboo furniture producers in Britain. The earliest recorded firm was Hubert Bill of 14 Little Camden St, London N.W., who claimed to have been established in 1869, while Daniel Jacobs & Sons of Hackney Road, London, were still in business in 1915, after 45 years of production. Design, quality, price and methods of construction were fairly consistent throughout the whole period, but it was the imaginative and often eccentric choice of subject matter that marked differentiation between the various firms. While most produced standard tables, stands and fire-screens, the more adventurous offered for sale items such as corner shelve units, charcoal barbecue grills and musical tea tables. Shelves were often covered with embossed leather paper designs, at first imported from Japan and then later produced in England. Some firms incorporated the knobbly roots of the bamboo stems into their designs, generally to form feet. Occasionally, handles to drawers and cupboards were made with these roots, although they were more commonly carved as imitations. Handles were mostly of cheap metal or brass. The ends of the bamboo canes were capped with stamped metal or turned bone, ivory or wooden discs. Methods of construction fell into three categories. First and most common is that of pegging. Bamboo stems being hollow, thick dowels can easily be glued into the joints. Some firms farmed out this work of `plugging' the ends of the canes to part-time workers at home. The second method, that of pinning, was far less satisfactory as bamboo tends to split lengthwise and therefore the jointed pieces eventually disintegrated. The most efficient method was that patented in 1888 (patent No. 2383) by the firm of W. F. Needham in Birmingham. It consisted of metal shoes and covers for all joints, which were made by wrapping a metal strip around the stems and soldering the overlapping ends. Some joints were further strengthened by a small pin or screw. Needham was by far the largest and most successful manufacturer, and their individual and superior method of construction undoubtedly gained them their reputation. A. Englander & Searle of 34 Gt Eastern St and 31 Mare St, Hackney, London, were a firm particularly concerned with methods of construction. Although they seem to have entered the bamboo furniture market at a comparatively late date, about 1898, they produced inexpensive' bamboo, aimed particularly at the export trade. Stating in their catalogue that bamboo furniture “can be exported in one piece or it can be exported in pieces and put together again. The fixing up is much facilitated by a system of marking and numbering. Further, no glue is required for putting together as the screw system is applied”. This method of construction best fits the Etagere and this item in the Flagstaff collection, and it is believed to have been made by A Englander & Searle, exported in a knock-down form to Australia, purchased in kit form from a dealer here and put together by the purchaser. The bamboo plant stand is a significant item as it highlight furniture fashion of the late Victorian era. This item was highly sort after in its time and although mass produced, not many examples remain because the item is so fragile so this example is a valuable addition to the Flagstaff collection. It is believed,the construction method used is by a notable and respected maker in England of bamboo furniture that was aimed specifically at the export market and probably came to Australia in kit form to be assembled by the purchaser.Plant stand: a bamboo plant stand with a hexagonal pine timber top edged with tortoise shell bamboo. The top is supported on four tortoise shell bamboo legs joined at the base by a square cane-covered shelf. The tortoise shell appearance is brown lacquer. This stand is part of the Giles Collection. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, shipwreck coast, furniture, plant stand, bamboo furniture, etagere, victorian furniture, simulated bamboo, tortise shell, a englander & searle, domestic furniture, giles collection, henry giles, cooramook, mailor’s flat, wangoom, 19th century household goods