Published by BHP 1967 gives the dimensions and properties of rails, steel sections and plates produced by Australian Iron and Steel and Broken Hill Pty Ltd. Was supplied free by BHP to students. Rail sections listed: 387 pound/yard crane rail 175 lb crane rail 146 lb crane rail 107 lb - 53 kg/m with fishplate and sleeper plates details 102 lb or 51 kg grooved tram rail 94 lb or 47 kg - fishplates and sleeper plates 91 lb or 45 kg NZR standard rail 82 lb or 41 kg - fishplates and sleeper plates 75 lb or 37 kg - fishplates and sleeper plates 63 lb or 30 kg - fishplates 45 lb or 22 kg - fishplates 30 lb or 15kg - fishplates 20 lb or 10kg - fishplates Yields information about rails and associated items produced by BHP AIS in 1967 along with other steel sections and plates.Book - 132 pages, white comb bound + blue plastic covers.railways, tramways, rails, bhp, fishplates, sleeper plates

Book - 10 pages + 13 drawings sheets of rail cross sections contained within separate printed covers (colour fleck), titled "British Standard - Tramway Rails and Fish Plates - Standard Sections and Specification - July 1903". Side stapled and then bound with a green tape on left hand side. Gives details of the standards of the materials, rolling, payment, conformity, testing, marking holes for both rails and fishplates. Drawings for 13 different weight rails, straight and curves, 90lb/yard to 116 and a drawing of the BS tyre profile for tram car wheels and how it interfaces with a rail. On rear cover, both sides gives a list of standards and foreign translations up to March 1919.On top of first sheet in black ink "Ballarat Tramway Preservation Society Catalogue No 8."trams, tramways, british standards, standards, rails, fishplates

Yields information regarding cross section of 80lb tramrail.SEC drawing number W-575/1, "80 LB. Rail Fishplate & Guardplate". Drawn 6/1955. Beige paper copy of original dyeline print.Copy of originalsecv, state electricity commission of victoria, ballarat tramway, ballarat tramway museum, ballarat, electricity supply department, works division

This hand operated drill was used to drill holes in the rails so that with fishplates (metal joiners) the rails could be bolted together to form a continuous length.Historic - Railways Permanent Way and Works - track equipment - Hand Operated Rail Drill Hand Operated Rail Drill made of cast Metalpuffing billy, hand operated rail drill

Produced by the SECV to document the fish plates used on Tram rail.Yields information regarding the Tramrail fishplates.SEC drawing number VW4/28, ""90LB. LORAIN" Tram-Rail Flame Cut Fish Plates". Drawn 10/02/1965. Beige paper copy of original dyeline print. Copy of original.electricity supply department, secv, works division, fishplates

Showing how tramway electrical current was returned to the electrical sub-station via the rails.Demonstrates an earth return bonding piece.Traction Return Current Rail Bond, consists of a multi strand copper cable abt 19mm dia. and 530mm long, with block of steel (25x25x43mm) brazed onto each end. The block of steel gets welded to the outside of the rail head at or near a joint in the rails. The bond is to ensure a reliable return current as the fishplates and bolts are subject to dirt and rust which can inhibit the current.tramways, electrical engineering, earth return, bonds, trackworks

Hand Rail Drill Out on the track in the old days, it was sometimes required to drill some holes in a piece of rail so that two rails may be joined together by a metal joiner – called a fishplate. Before the use of generators and oxy cutting, the only way to do this was with a hand drill. This is the machine operated by two people, that would drill a hole in the rail. With two to three holes to be drilled in each rail end (ie 4 or 6 holes), it was a tiring, back breaking job. And then there was usually the rail on the other side of the track to be done! Historic - Railways Permanent Way and Works - track equipment - Hand Rail DrillHand Rail Drill made of metal puffing billy, hand rail drill

Letter concerning "Mr Jerusalem Smith" forwarding drawings of rail Sections that could be used in horse tramways. The cross-section of the rail in the drawings have been water coloured with a blue and yellow wash. .1 - Covering Letter from Ian Armstrong of the Armstrong Collection .2 - Image of the cover of the book at Post-it note that came with the item .3 - Drawing of Gjedsted Rail. .4 - Central Webbed Rail .5 - Davies Foot Rail with fishplates shown. .6 - Davies Foot Rail with a wheel shown in the drawing. See also Reg item 4248 and 9646 for further correspondence on this matter.trams, tramways, trackwork, horse trams, city of ballarat

Set of 6 technical data sheets, published by the British Standards Institution in 1959 / 1960 providing information about the standards for various railway products in a summary sheet form. Each sheet has been folded into 8 with the title and other sheets on the outside when folded. .1 - Sheet 3A - Flat Bottom Railway Rails, fishplates and Steel sleepers - PD 3876 - August 1960. .2 - Sheet 3B - Axles, Tyres, Solid Rolled Steel Wheels and disc wheel centres - PD3277 - December 1959 .3 - Sheet 3C - Steel billets, blooms, bars and forgings for railway rolling stock - PD 3361 - April 1959 .4 - Sheet 3D - Steel slabs, plates, sections, bars and rivets for loco boilers, locomotives, carriages and wagons - PD 3387, May 1959. .5 - Sheet 3E - Laminated springs and spring steels - PD 3365 April 1959 .6 - Sheet 3F - Helical and Volute Springs and Spring Steelstrams, tramways, steel, wheels, springs, specification, materials

Yields information about the reconstruction of the depot trackwork during 1935/1936 and the condition of the rails, types of rails and methodsSet of 5 Black and white photo prints from collected negatives of the relaying of the depot fan at the SEC Ballarat depot building, during refurbishment by the SEC during 1935 or 1936. 1351.1 - Wendouree Parade depot junction, track - relaying the 2nd set of points. One track was still useable at the time. Note fences and tools lying around the work area. 1351.2 - laying out the trackwork for two and three roads, note machines and cylinders in background. 1351.3 - looking along No. 2 road out of the depot doors, not connected, possibly taken some time after 1351.2, as the area appears to be cleaned up. 1351.4 - Photo showing the various rail weights for possibly the western rail on No. 3 road and how the fishplates were at the time of the photograph. Not known whether this was the final arrangement, taken looking towards the depot building. 1351.5 - ditto but from the other end - note the damaged flangeway on the depot end rail - horse tram rail? Copy 2 - of all above photos - large format prints (203H x 253W) - added 28/7/2007, ex Alan Bradley holding of prints, received 5/2007. See also Reg Item 3901 for a mounted set of these photographs along with those of Reg Item. 1352. Negatives scanned at high res and images updated 14/5/2020. tramways, trams, wendouree parade, sec depot, rehabilitation, trackwork

Set of nine Engineering standards that were acquired by ESCo during the 1920's. 2261.1 - British Engineering Standards Assoc. No. 101 - 1921, titled "British Standard Specification for Tramway Tyres" dated July 1921. 12pp + printed cover and a folded tip in sheet printed as plate 1, date stamped ESCo 14 Sep. 1923 - 216H x 141W, with "Tait Book Co. 90 William St. Melbourne" stamp on front cover. Light blue grey cover, with off white paper inside. Saddle stapled, rounded corners. Printed by Waterlow & Sons Limited, 49 Parliament Street Westminster SW1. See image 2261i1 for front cover. Publisher - Crosby Lockwood and Son London UK. - see images btm2261i1 and i2 for scans of the document. 2261.2 - British Engineering Standards Assoc. No. 2 - 1922, titled "British Standard Specification and Sections for Tramway Rails and Fishplates" dated March 1922. 56pp including cover, actual pages 35 - 50 are fold out sheets for plates 1 to 8 with rail sections detailed, date stamped ESCo 8 Jun 1926 - 216H x 142W, with "Tait Book Co. 90 William St. Melbourne" stamp on front cover. Light blue grey cover, with off white paper inside. Saddle stapled, rounded corners. Printed by Waterlow & Sons Limited, 49 Parliament Street Westminster SW1. Publisher - Crosby Lockwood and Son London UK. See image btm2261i3.pdf and i4.pdf 2261.3 -Australian Commonwealth Engineering Standards Association, Standard No. E 1a - 1926T - "Tentative Australian Standard Specifications for Railway Permanent Way Material", dated May 1926. 32pp plus cover, date stamped by ESCo 14 June 1926 - 229H x 157W saddle stapled. Grey cover with off white paper inside. Printed by The Australasian Medical Publishing Company Limited. See image 2261i2 for front cover. Publisher - The Association Sydney, Australia. See images i6 and i7 for a pdf scan of this document. 2261.4 - British Engineering Standards Assoc. No. 2 - 1927, proof issue, titled "British Standard Specification and sections for Tramway Rails and Fishplates" dated 1927. 56pp including cover, actual pages 35 - 50 are fold out sheets for plates 1 to 8, date stamped ESCo 16 Jul 1927 - 216H x 142W. Off white paper covers and text. Saddle stapled, rounded corners. Has "Waterlow" name on front cover bottom right hand corner. 2261.5 - Australian Commonwealth Engineering Standards Association, Standard No. C. 30 -1926T - "Tentative Australian Standard Specification for Drum Controllers and Resistances for use therewith for electric motors (DC and AC slip ring, excluding controllers for traction purposes", dated December 1926. 28pp plus cover, date stamped by ESCo 29 Jun 1927 - 227H x 152W. Grey cover with off white paper inside, saddle stapled. Printed by The Australasian Medical Publishing Company Limited. Publisher - The Association Sydney, Australia. 2261.6 - Australian Commonwealth Engineering Standards Association, Standard No. C 33 - 1926T - "Tentative Australian Standard Specifications for Drum Starters for electric motors", dated December 1926. 28pp plus cover, date stamped by ESCo 29 June 1927 - 227H x 153W. Grey cover with off white paper inside, saddle stapled. Printed by The Australasian Medical Publishing Company Limited. Publisher - The Association Sydney, Australia. 2261.7 - Australian Commonwealth Engineering Standards Association, Standard No. E 13 to 15 1927 T - "Tentative Australian Standard Specifications for Railway Rolling Stock Material, locomotive tyres, carriage wagon and tender tyres, weldless steel angle rings", dated August 1927. 32pp plus cover, date stamped by ESCo 15 Sep 1927 - 228H x 153W. Grey cover with off white paper inside, saddle stapled. Printed by The Australasian Medical Publishing Company Limited. Publisher - The Association Sydney, Australia. 2261.8 - Australian Commonwealth Engineering Standards Association, Standard No. E 22 to 29 1928 - "Australian Standard Specifications for Railway Permanent Way Material", dated January 1928. 64pp plus cover, date stamped by ESCo, but not readable - 228H x 153W. Light purple cover with off white paper inside, saddle stapled. Printed by The Australasian Medical Publishing Company Limited. Publisher - The Association Sydney, Australia. 2261.9 - British Engineering Standards Assoc. No. 101 - 1929, titled "British Standard Specification for Tramway Tyres" dated February 1929. 16pp +cover, pages 13 and 14 are foldout plate 1, held together with sewn thread, - 218H x 142W, with "J. Ewins & Sons, Booksellers and Stationers Ballarat" label on front cover. Light blue grey cover, with off white paper inside. Printed by Waterlow & Sons Limited, 49 Parliament Street Westminster SW1. Publisher - Crosby Lockwood and Son London UK. Yields information about British Tramway Standards which were used on Australian and New Zealand Tramways.Set of nine printed books, centre stapled. trams, tramways, standards, tramway equipment, tyres, permanent way, track materials, electric motors, esco

See image 2085i4 for tender re brake blocks detailing the type of cast iron and the Brinell hardness.Demonstrates MMTB tender documents of 1923.Manila colour file marked "Specifications" containing 25 different specifications of the MMTB 1922 to 1925. Not all dated, generally foolscap sheets either pinned or stapled. Dated Tender No. For supply of: 30/6/1925 157 Steel castings Not dated Ballast Hopper trucks 1923 Steelwork for electric and cable tramway crossings Pamphlet Monier Pipes and box culverts Pamphlet Monier – septic tanks and aerators Not dated 229 Purchase of removal of cottages 101 to 107 Bouverie St Carlton Not dated Side tipping ballast trucks 18/7/1923 226 Brake shoes - see pdf file for a full scan 18/7/1923 222 Steel tramway tyres 18/7/1923 220 Concrete Mixing Plants Not dated 219 Dressed wooden poles 9/5/1923 215 Bricks 19/4/1923 214 Reinforced Concrete fencing posts 20/3/1923 213 Tramway steel wire ropes 28/3/1923 212 Painting exterior of 673 Bourke St Melbourne Not dated 210 Alterations to offices at Rathdowne St depot Not dated 202 80lb steel rails and fishplates 5/1/1923 198 GE201 Motors 6/12/1922 197 Hydraulic pit jacks 6/12/1922 195 Supply of Low tension feeder cable Not dated 194 Supply of high tension cable 4/12/1922 188 Supply of hard drawn trolley wire 6/11/1922 186 Dressed wooden poles 20/11/1922 182 Steel Poles 20/12/1922 171 Erection and completion of new car depot Glen Huntly Roadtrams, tramways, mmtb, tenders, specification, trackwork, motors, cables, poles, ballast wagons, glenhuntly tram depot, brake blocks