PIVOT is a company involved in agricultural fertilisers.This is a useful pictorial reference tool.A commemorative calendar with colourful photographs, one for each month. On the front cover are brown drawings of agricultural items and scenes. "Commemorative Calendar" is in a banner above "Pivot Promotions Productivity". above the banner is a sheaf of wheat around "75 YEARS" with two flags - one the Australian flag and the other a PIVOT flag.calendar-pivot

Port of Portland Authority archivesFront: (no inscriptions) Back: (no inscriptions)port of portland

Hand made 1900. Pivoted rocking washing machine which has ribs on the base and sides to aid its effectiveness.Wooden rocking washing machine. Wooden pivoted container supported on stand. Internal sides and base have ribs. washing machine, rocking washing machine,

This medical instrument was used in the Tawonga District General Hospital which was built in the 1950s specifically for the increase in population due to the Kiewa Hydro Scheme. Historical: Shows the development of scientific hospital equipment. Provenance: Used in the Tawonga District General Hospital which was remote and therefore required good equipment.Used for taking instruments out of the autoclave. Stored by the autoclave in a container of sterilising fluid. Dull metal, heavy, long scissors bent at the pivot. One handle has a hook for the fingers, the other a ring for the thumb. The blades are blunt with the top one curving over the bottom one when closed. AMAX Germany - on hook handle - half way along Stainless - on the other handle - near the pivotmedical instrument. hospital equipment. tawonga. mt beauty.

p34 'Old Farm Machinery in Australia' Society Ref.Horse drawn, hand operated Spring Tyne Orchard Cultivator. It can be paired with a similar cultivator. Has 7 tynes one disc at rear both adjustable. Depth of tyne into soil controlled by levers for light scratching to deep. The weight per tooth was 1/2 that of ordinary English harrow. Useful for rough stony ground.'Harvey' - on rear disc adjuster pivot.rural industry, orcharding

Used for the grooming of horses circa 1900Imported and sold by Holden and FrostTwo pivoted steel shears with wooden hand gripsA. Martin and Co Manufacturers on blade A. Martin Improvedclippers, equine, general

steel wrench used in construction and plumbingImported, used and sold by Holden and FrostTwo part steel adjustable wrench pivoting in centreFootprint Made in England Etching of a footprintwrench, steel, adjustable

Used in the grooming of horses C1900As sold by Holden and FrostTwo pivoted steel arms with wooden handles. Steel combOn steel arm Martin and Co on other arm manufacturers on comb improvedequine, clippers

Candle holder, decorative brass concertina, extends and pivots, with securing clampflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, candle holder

Used for the grooming of horse hair C1900we believe these were sold by Holden and Frost C1900Two pivoted steel arms with wooden hand grips with steel cutting combClark on one arm, patent on other arm. Impressed on each wooden handle 628 Oxford Streetequine, clippers

Used by builders and plumbers to cut tin.Used by Alan Tyers who worked for the State Electricity Commission of Victoria on the Kiewa Hydro Scheme.Cousin's Regular Pattern. Used by builders and plumbers to cut tin. Regular pattern with straight cutting edge. Best cast steel, black finish, ground blades. 9 inch. When closed blades meet at the point. Handles meet when closed and are curved outwards."J. Cousins & Sons. Sheffield"- Inscribed on handle side of pivot on one side.tinsmith, tin snips, tool, secv, cousin's & sons

Sharped Edged instrument used for cleaning hair from the skin. http://en.wikipedia.org/wiki/Straight_razor A straight razor is a razor with a blade that can fold into its handle.[1] They are also called open razors and cut-throat razors. HISTORY The first modern straight razor complete with decorated handles and hollow ground blades was constructed in Sheffield, England, by Benjamin Huntsman in 1740. Huntsman's process was adopted by the French sometime later. The English manufacturers were even more reluctant than the French to adopt the process and only did so after they saw its success in France.[5] Straight razors were the most common form of shaving before the 20th century and remained that common in many countries until the 1950s. TODAY Straight razors are still manufactured. DOVO, of Solingen, Germany, and Thiers Issard of France are two of the most well-known European manufacturers. Feather Safety Razor Co. Ltd. of Osaka, Japan makes a razor with the same form as a traditional straight, but featuring a disposable blade that can be installed through an injector-type system. Modern straight razor users are known to favor them for a variety of reasons. Some are attracted to the nostalgia of using old and traditional methods of shaving. It is a masculine ritual comparable to pipe smoking. Others profess an interest in reducing the waste of disposable blades.[11][22] Still others agree that straight razors provide a superior shave through a larger blade and greater control of the blade including the blade angle. Straight razors cover a much greater area per shaving stroke because their cutting edge is much longer than any of the multiblade razors. Ivory cut throat razor, with cream case 00121.3.Known as a straight razor.Razor with square point, full hollow ground 5/8” blade and double transverse stabiliser. The centre pin adds stability and rigidity to the handle---I think this is it ROM Parts The narrow end of the blade pivots on a pin, between 2 pieces of ivory forms the handle. LONG EXTRACT FROM WIKI _ SHORTEN to describe 00121 The parts of a straight razor and their function are described as follows: The narrow end of the blade rotates on a pin called the pivot, between two protective pieces called the scales or handle. The upward curved metal end of the narrow part of the blade beyond the pivot is called the tang and acts as a lever to help raise the blade from the handle. One or two fingers resting on the tang also help stabilize the blade while shaving. The narrow support piece between the tang and the main blade is called the shank, but this reference is often avoided because it can be confusing. The shank sometimes features decorations and the stamp of the country of origin. The top side and the underside of the shank can sometimes exhibit indentations known as fluting, or jimps for a more secure grip.[8] The curved lower part of the main blade from the shank to the cutting edge is called the shoulder.[9] The point where the shoulder joins the cutting edge is called the heel. A thick strip of metal running transversely at the junction where the main blade attaches to the shank is called the stabiliser. The stabiliser can be double,[10] single or can be absent in some razor models. The first stabiliser is usually very narrow and thicker and runs at the shank to blade junction, covering the shank and just spilling over to the shoulder. The second stabiliser can be distinguished since it is considerably wider and narrower, appearing after the first stabiliser and running lower into the shoulder. The non-cutting top of the blade is called the back or the spine while the cutting part of the blade opposite the back is called the cutting edge.[11] Finally the other free end of the blade, at the opposite end of the tang, is called the point and, sometimes, the head or the nose.[9][12] There are two to three pins in any handle. The middle pin, if present, is plastic coated and is called the plug.[13] Its function is to stabilise the sides of the handle so that they cannot be squeezed in the middle. When folded into the scales, the blade is protected from accidental damage, and the user is protected from accidental injury. During folding, the back of the blade, being thick and normally with a curved cross-section, acts as a natural stopper and prevents further rotation of the blade out of the handle from the other side shaving, lever, handle, blade, pivot, razor, tang

Used by W.R. Cruickshank from 1920-1970s in Albury when he worked at Nicholson and Smith, Watchmakers and JewellersCurved handles, shaped arms to a point, with screw adjustment on side, with pivot; used in clock makingEgiercoconhorology, tools

used in Metal construction and plumbingImported and sold by Holden and FrostTwo part steel adjustable wrench, with outer covering inner, pivoted so that wrench is adjustableMade in Englandsteel, footprint, wrench

Adjustable Angle Bit-stock. Used for drilling in difficult places. Is fully adjustable and pivots around a universal jointflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, angle bit-stock