The A2 class was an express passenger locomotive that ran on Victorian Railways from 1907 to 1963. The 996 arrived at the Port of Echuca in 1968 from Newport and was donated to the City of Echuca by the Echuca Lions Club & the Rotary Club who had purchased it for 1250 pounds. the A2 996 is displayed at the Echuca Wharf Railway Siding.A2 996 is one of the later batch of sixty A2 class express passenger locomotives built with superheating and other design enhancements including Walschaerts valve gear. it was constructed at Newport Workshops in 1916 and was among the last few A2 class remaining in service when taken off register by the Victorian Railways in November 1963. Steam Locomotive made of steel & wrought iron with black livery. Front- A2 996 /. Rear - 996a2 locomotive, echuca lions club/rotary club, wharf, echuca loco shed, shire of campaspe, newport workshop, rollingstock collection, steam trains

Typical view of how Spencer Street Station looked during the 1930s to 1960s.Digital TIFF file Scan of Kopdak 620 black and white negative transparencygeorge coop collection, spencer street railway station, 1951, a2 class steam locomotive, a2-992

Current Southern Cross Railway Station was originally Spencer Street Railway Station prior to upgrade and addition of wave form roof This photo was taken the same time as EDHS_05399 Diesel-electric rail cars in the Railmotor Yard on the other side of the platform at Spencer Street Railway Station.Digital TIFF file Scan of 35mm Ilford FP3 black and white transparencya2 class steam locomotive, a2-987, george coop collection, southern cross railway station, spencer street railway station

Spontaneously taken photograph. Railway administrative offices in background.Digital TIFF file Scan of Kopdak 620 black and white negative transparencygeorge coop collection, a2 class steam locomotive, spencer street railway station

Newport Railway Workshops is now home to the Australian Railway Historical Society Museum and Steamrail VictoriaDigital TIFF file Scan of 35mm Ilford FP3 black and white transparencya2 class steam locomotive, australian railway historical society museum, film - ilford fp3, newport railway workshops, steamrail victoria

Photo of the Lydiard St Level Crossing showing #26 waiting at the closed gates. Also shows a car and pedestrians waiting while an A2 class locomotive occupies the crossing. In the background is the Provincial Hotel.Yields information about Lydiard St level Crossing in 1951.Black and white photograph on plain paperHas details of photograph and date on rear and number "760". #26 at Railway X ing Lydiard St Ballarat 6-1-51ballarat, lydiard st, lydiard st level crossing, tram 26, a2 class locomotive, provincial hotel

ill, p.56.non-fictionA photographic history of the A2 class 4-6-0 steam locomotive on the Victorian Railwayssteam locomotives - victoria- history, a2 class locomotive - victoria - history

Cast iron numberplate (white on black background) mounted on wood, with a braille and a written nameplate which reads: "Presented by the Victorian Railways Commission to the R.V.I.B. School for Blind Railway Club. This number plate came from steam locomotive class A2 number 932, which hauled the 'Sydney Limited', the 'Overland' and mainline passenger trains during its 48 years of service that ended in 1961." Cast iron numberplate on wood royal victorian institute for the blind, rvib school

This photo was taken the same time as EDHS_04673-36 an A2-class Steam Locomotive 987 sitting on the other side of the platform at Spencer Street Railway Station. 280HP Walker Railmotor Walker Railmotors are diesel railcars, or train sets, that were designed to improve the passenger services on Victorian branchlines in Australia. They were practically a bus service on rails. These motors entered service in 1948 with the 102 hp and the 154 hp units. The 102 hp units were built until 1955 and the 153 hp units stopped being built one year before. The 280 hp units were built from 1950-1951. The engine and drive systems were built by the Walker Railcar Company in Wigan, England, and the bodies were built by Martin & King in Melbourne, Victoria, Australia. The railcars were put together by Victorian Railways. The railcars were, in the end, gradually replaced by a diesel electric railcar from 1978 on. Amazingly these railcars survived to this time, even though they were in direct competition with the bus service. By 1980 no Walker Railmotor cars or trainsets were in service. Very few are preserved. REF: Walker Railmotors, https://locomotive.fandom.com/wiki/Walker_RailmotorsDigital TIFF file Scan of black and white 620 format contact printgeorge coop collection, spencer street railway station, walker railmotor

Railways Collection-Stapled A4 paper Booklet (Commemorating the Centenary of the opening of the railway from Melbourne to Bendigo , 20.10.1962 ) - Australian Railways Historical Society ''100 Years to Bendigo''. The front page has a sketch by Ted Healey of two old trains pulling passenger carriages.There are some black and white photos. The inside cover shows steam Loco with a caption - Down Great Northern Limited express in 1938 Double headed by A2 .972 and A2.883 passing Footscray. (photo : J.L. Buckland ) Page 2 has a photo of a Postcard - 450 Tons of Gold - Pages 10-12 provide information on the Locomotives and carriages that were used. Page 23 has a photo of G Class Light Lines 4-4-0 and V Class Compound 2-8-0 Locos at Bendigo Engine shed in the early 1900's.railways, bendigo to melbourne, 450 tons of gold -

The photo was taken at 8.15am on Friday 12 September 1919. The D class was a passenger and mixed traffic steam locomotive which operated on the Victorian Railways from 1902 to 1974. Originally it was introduced on mainline express passenger services, but they were quickly superseded by the much larger A2 class and were relegated to secondary and branch line passenger and goods service, where they continued in service for the next fifty years. The D716 was probably built at the Newport Workshops, post 1910 and before 1914. The expansion of Melbourne's population into new suburbs early in the 20th century, and the delay of the suburban electrification project, meant there was the need for faster and more powerful steam locomotives for the suburban rail network. In 1908, the basic design was adapted to create a more powerful locomotive. They were put to work on longer and hillier suburban routes including the Lilydale line. A total of 58 were built between 1908 and 1913. See wikipedia for a more detailed history of the D class locomotives. Electric trains replaced steam in 1922. Mr William Holmes of 'Lugano', Mont Albert Road was in charge of the design and introduction of the electrification of the Melbourne rail system.Black and white photo of a steam train approaching the platform at Mont Albert station. Rear in blue biro in Jocelyn Hall's handwriting: "Hamilton St Mont Albert / probably 1919".mont albert station, railways, trains, d class locomotives, norman carter, steam trains

ill, p.21.non-fictionA history of the variations in steam locomotive design on the Victorian Railways, focusing on the D, A1 & A2, G & Na classes.steam locomotives - victoria- history, steam locomotives - australia - history

The workshops were opened in November 1917 by the Victorian Railways. It opened in response to political pressures from provincial groups for decentralisation, with the Victorian Railways preferring the cheaper option of expanding the existing Newport Workshops in suburban Melbourne. Furthermore, unemployment had risen in both Bendigo and Ballarat due to a decline in mining operations. The main work carried out was repairs and maintenance of existing wagons and locomotives, however during 1919-22 thirteen new steam locomotives were also built - eight DD class (1033 - 1037, 1047 - 1049) and five A2 class (1078 - 1082). From the 1950s onwards, numerous steam locomotives were scrapped at the workshops. During the years immediately following nominal dieselisation in 1968, they were, at times, cutting up locomotives at the rate of one every two to three weeks. The workshops were also the site of the first VR brass foundry, which was transferred to Newport by the 1960s. Also, throughout 1965, VLX louvred vans were constructed at the workshops, at a rate of one a week. Other tasks included spring manufacture, construction of stainless steel footwarmers, and assembly of pantographs for electric trains, with a staff of 720 employed during 1966. By the 1980s, refurbishment work was also being carried out on Melbourne suburban electric multiple units. The 1980s were also a time of restructuring, and on the breakup of the Victorian Railways the workshops passed to the State Transport Authority and then the Public Transport Corporation. With privatisation the workshops were closed, with the loss of 262 jobs. In February 1996, the workshops were taken over by A Goninan & Co. In October 1999 the workshops were purchased by Great Northern Rail Services, with A Goninan & Co remaining as a tenant. In February 2001 A Goninan & Co vacated the site. The workshops were redeveloped in 2002 at a cost of $6.5 million - $4 million from VicTrack, $2 million from the State Government Regional Infrastructure Development Fund and $500,000 by the City of Greater Bendigo. The Bendigo Rail Workshops at North Bendigo are currently used by Southern Shorthaul Railroad to maintain broad gauge rolling stock for Pacific National, V/Line, Metro Trains Melbourne and CFCLA.Typed document. A4 page folded in half. On tan paper. Document pertaining to Bendigo V/Line workshops open day. Map on inside of folded page. Undated document.train, v/line, workshops, open day

Certificate presented to N C Boucher after retiring as President of the Tramway Division of the Australian Railways Union in 1947. Signed by A J Cregan as State President and J J Brown as State Secretary. The Union seal has been applied to the item. The Union had several divisions such as guards, signalmen, shunters etc. The Tramway Division represented the tramway depots at Elwood and Sandringham. The certificate includes a photo of the Union building, a train hauled by A2 945 and an Electric Train. The Union did not represent locomotive or electric train crews, these were represented by the Australian Federated Union of Locomotive Employees. For notes on Mr Boucher's career see item 7056.Demonstrates an ARU Illuminated address of the 1940sFramed Certificate - printed base on paper with name, position inked on over a light blue wash. Timber surround with gold surround and glazed.n c boucher, unions, vr trams, aru, certificates, illuminated address