Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Transcript of a talk given by Eric Wigglesworth in 2003. He looks at what has happened for much of the twentieth century. Accidental injury was was unfortunately considered a behavioural problem - fault and negligence, not a public health problem. The "Safe place" paradigm he promotes is similar to the foundation of the post graduate courses in Ballarat.A4 sheets - Cover sheet, 10 for presentationviosh, victorian institute of occupational safety and health, eric wigglesworth, post graduate courses, accidental injury, fault and negligence, public health

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Ballarat College of Advanced Education made a preliminary submission for a Post Graduate Institute Course in Safety and Loss Control in 1975. This was forwarded to the External Advisory Panel and other experts for comment, etc. Comments were constructive and some modifications were made. These have been incorporated in this Second Draft dated August 1976. The aim of the course is to assist the administrator in identifying such accidental loss producing areas as - injury. plant damage, fire, breaches of security, property and storm damage, pollution, transportation, product liability and occupational disease. Sixteen A4 sheets - typed. Front sheet - Title page. Some pages have hand written notations in pencil. Last page has section hand written in ink.viosh, victorian institute of occupational safety and health, ballarat college of advanced education, post graduate institute, pgi, safety and loss control, external advisory panel, second draft, accidental loss, injury, plant damage, fire, security breaches, property and storm damage, pollution, transportation, product liability, occupational disease

PRIVATE JOSEPH FLETCHER, No 1226, 16th Infantry Battalion, RTA. PRIVATE JEFFREY WILLIAM FLETCHER, No , 13th Light Horse Regiment, RTA RICHARD FLETCHER - Employed as a Munitions Worker in England. PRIVATE JOHN FLETCHER, No 2723, 38th Battalion, RTA PRIVATE SEPTIMUS FLETCHER, No 4485, 7th Infantry Battalion, RTA. PRIVATE ROBERT MARTIN, No 662, 7th Infantry Battalion, died accidental injury in Egypt 26 Feb 1915. Memorabilia - Framed story of a family, in colour, using memorabilia of the soldiers and their lives. Printed on paper. Frame - black extruded plastic, glass front, cardboard backing.FLETCHER FAMILY framed item, anzacs, eaglehawk

Arthur Reagan POWNALL No 5345 enlisted in the AIF on 16.6.1915 in reinforcements for Convalescent Depot in London age 23 years 7 months. Embark for England 22.7.1915, promoted L/Cpl 6.10.1916, embark for France 5.3.1917, transfer to 5th Div AMC 23.3.1917, transfer to 15th Field Ambulance 25.3.1917, WIA 8.5.1917 GSW’s to legs, rejoin unit 26.6.17, awarded the Military Medal (MM) near Perrone 2.9.18 as a stretcher bearer, awarded a bar to the Military Medal 29/30.9.1918 over 36 hours as a stretcher bearer at Bellicourt, hospital 24.10.1918 accidental injury bayonet wound left thigh, embark for Australia transport duty as N/Staff Masseur 19.4.1919, discharged from the AIF 23.9.1919. A bar to the Military Medal means he has actually won two MM’s. Plastic covered folder with black binding containing typed diary of A R POWNALL 22.7.15 to 9.6.19, 120 pages. Also copies of Service Records, Awards. The rear has folded sheets with photostats of photos & newspaper articles.documents - diaries - transcripts, military history

Alan Kenneth Naismith, VX4838 enlisted in the AIF on 23.10.1939 age 24 years 7 months. Hospital 2.11.39 - 6.11.39 unlisted, posted to 2/7th Bn 6th Division 2nd AIF on 25.11.1939, hospital 2.3.40 - 19.3.40 unlisted, embarked for the Middle East 18.4.1940 arriving 17.5.1940, hospital twice between 31.7.40 - 22.8.40 unlisted, total 11 days, embark for Greece 9.4.1941, return to Middle East late May/June 1941 medical, promoted Cpl 20.7.1941, A/Sgt 14.2.1942, embark for Australia 12.3.1942 arriving 38.3.1942, hospital 9.6.42 - 16.6.42 with Threadworm, embark for New Guinea 13.10.1942, promoted Sgt 29.10.42, revert to Cpl at own request 25.11.1942, hospital with Malaria 18.1.43 - 9.2.43. During the period of August 1st - 5th 1943 at an area called Bobdubi Ridge Alan is awarded the DCM and is WIA on the 5th, GSW to right shoulder, embarks from Pt Moresby 27.9.1943 arriving Cairns 30.9.1943, hospital Malaria 13.2.44 - 10.3.44, accidental injury 6.5.1944 fractured left clavicle, discharged from the Army on 8.9.1944. The Official History of Australia in WW2 states that Sgt Naismith had gained a reputation as a booby trap expert and was interested in these gadgets.The citation is on a light parchment type paper rectangular in shape. Colour is into a fawn with stains and marks from handling. Creases from folding have left several small tears. The rear is blank with sticky tape holding the citation together at the folds.At the top of the Citation is a seal, blue in colour with the words, Govenor - General, Commonwealth of Australia. The centre coat of arms of the seal has fine writing which is unreadable. There are no other markings except for the citation wording itself. “Distinguished Conduct Medal Corporal Alan Kenneth Naismith ( VX4838 )”citation dcm, a.k.naismith vx4838, documents - certificates

.1) Albert BOLDISTON, No. 747 enlisted 02/11/1916 ANZAC cyclist Batt. then 37th Bn. Discharged 29/01/1919. .2) Letter is to "Mr & Mrs DILLON from Pte. J. BURKE No. 3477 21st Batt. A.I.F", dated 17/02/1916. .3)-.10) These are "Daily mail official war pictures". Series 18. Albert Boldiston No 747 enlisted in the AIF in reinforcements 7 Anzac Cyclist Batt on 2.11.1916 age 24 years. Embarked for England 16.12.1916, transfer to 8th Batt 7.3.1917, embark for France 14.6.1917, transfer to 37th Batt 29.6.1917, hospital accidental injury (sprained ankle) 5.7.1917, rejoin unit 10.9.1917, hospital 18.11.1917 with Trench Feet, rejoin unit 13.6.1918, WIA 10.8.1918 GSW left wrist (through the joint) return to Australia 20.10.1918, discharged from the AIF 29.1.1919. Joseph Martin Burke No 3477 enlisted in the AIF in 8th reinforcements 21st Batt on 16.7.1915 age 21 years 4 months. Embark for Egypt 29.12.1915, transfer to 60th Batt 26.2.1916, then 57th 21.3.1916, then 13th FAB (Artillery) 27.3.1916, embark for France 16.6.1916, transfer to 25th FAB 9.7.1916 then 13th FAB 24.1.1917, hospital England while on leave 29.10.1918 with Influenza, return to Australia 21.12.1918 re the Influenza for discharge, discharged from the AIF 21.3.1919..1) Photo, B&W on cardboard, group of soldiers (20) seated outside building. Albert BOLDISTON is on 2nd left front row. .2) Postcard photo, B&W, soldier in peak cap standing. Letter on rear in ink from J.M. BURKE. .3) Postcard photo, B&W featuring "King George" in a gun pit. .4) Postcard photo, B&W featuring "Australian heavy gun at work". .5) Postcard photo, B&W featuring "Australians loading a trench mortar". .6) Postcard photo, B&W showing a camouflaged troopship. .7) Postcard photo, B&W, soldier keeping a lookout in trench. .8) Postcard photo, B&W showing "An observation balloon". .9) Postcard photo, B&W showing wounded waiting for the field ambulance. .10) Postcard photo, B&W showing "Australian gunners at work". .11) Card, yellow with black print both sides relating to a 37th Batt. 1st & 2nd A.I.F reunion "Whippbang 1950"..5) "Troopship in port".photography-photographs, military history - army

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders in the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Eric Wigglesworth was born in England in 1926. He came to Australia in the 1960s. He was a specialist in accident injury prevention and continued this when in Australia. He was a Director of the Injury Research Project at the Royal Australasian College of Surgeons and a Director of the Sir Robert Menzies Memorial Foundation. He became a Fellow of the Institute of Occupational Safety and Health. Eric was instrumental in establishing the Graduate Diploma in Occupational Hazard Management in 1980 at Ballarat College of Advanced Education - the first tertiary-level course in accidental injury prevention in Australia. This course and others relating to Occupational Health and Safety were the centre of study for what was known as the Victorian Institute of Occupational Safety and Health, Australia - VIOSH.Colour photographviosh, victorian institute of occupational safety and health, ballarat college of advanced education, eric wigglesworth, accident injury prevention, royal australasian college of surgeons, sir robert menzies memorial foundation, occupational hazard management, graduate diploma

Sharped Edged instrument used for cleaning hair from the skin. http://en.wikipedia.org/wiki/Straight_razor A straight razor is a razor with a blade that can fold into its handle.[1] They are also called open razors and cut-throat razors. HISTORY The first modern straight razor complete with decorated handles and hollow ground blades was constructed in Sheffield, England, by Benjamin Huntsman in 1740. Huntsman's process was adopted by the French sometime later. The English manufacturers were even more reluctant than the French to adopt the process and only did so after they saw its success in France.[5] Straight razors were the most common form of shaving before the 20th century and remained that common in many countries until the 1950s. TODAY Straight razors are still manufactured. DOVO, of Solingen, Germany, and Thiers Issard of France are two of the most well-known European manufacturers. Feather Safety Razor Co. Ltd. of Osaka, Japan makes a razor with the same form as a traditional straight, but featuring a disposable blade that can be installed through an injector-type system. Modern straight razor users are known to favor them for a variety of reasons. Some are attracted to the nostalgia of using old and traditional methods of shaving. It is a masculine ritual comparable to pipe smoking. Others profess an interest in reducing the waste of disposable blades.[11][22] Still others agree that straight razors provide a superior shave through a larger blade and greater control of the blade including the blade angle. Straight razors cover a much greater area per shaving stroke because their cutting edge is much longer than any of the multiblade razors. Ivory cut throat razor, with cream case 00121.3.Known as a straight razor.Razor with square point, full hollow ground 5/8” blade and double transverse stabiliser. The centre pin adds stability and rigidity to the handle---I think this is it ROM Parts The narrow end of the blade pivots on a pin, between 2 pieces of ivory forms the handle. LONG EXTRACT FROM WIKI _ SHORTEN to describe 00121 The parts of a straight razor and their function are described as follows: The narrow end of the blade rotates on a pin called the pivot, between two protective pieces called the scales or handle. The upward curved metal end of the narrow part of the blade beyond the pivot is called the tang and acts as a lever to help raise the blade from the handle. One or two fingers resting on the tang also help stabilize the blade while shaving. The narrow support piece between the tang and the main blade is called the shank, but this reference is often avoided because it can be confusing. The shank sometimes features decorations and the stamp of the country of origin. The top side and the underside of the shank can sometimes exhibit indentations known as fluting, or jimps for a more secure grip.[8] The curved lower part of the main blade from the shank to the cutting edge is called the shoulder.[9] The point where the shoulder joins the cutting edge is called the heel. A thick strip of metal running transversely at the junction where the main blade attaches to the shank is called the stabiliser. The stabiliser can be double,[10] single or can be absent in some razor models. The first stabiliser is usually very narrow and thicker and runs at the shank to blade junction, covering the shank and just spilling over to the shoulder. The second stabiliser can be distinguished since it is considerably wider and narrower, appearing after the first stabiliser and running lower into the shoulder. The non-cutting top of the blade is called the back or the spine while the cutting part of the blade opposite the back is called the cutting edge.[11] Finally the other free end of the blade, at the opposite end of the tang, is called the point and, sometimes, the head or the nose.[9][12] There are two to three pins in any handle. The middle pin, if present, is plastic coated and is called the plug.[13] Its function is to stabilise the sides of the handle so that they cannot be squeezed in the middle. When folded into the scales, the blade is protected from accidental damage, and the user is protected from accidental injury. During folding, the back of the blade, being thick and normally with a curved cross-section, acts as a natural stopper and prevents further rotation of the blade out of the handle from the other side shaving, lever, handle, blade, pivot, razor, tang