Cast steel and machined Self Lapping air brake handle stamped "CAR 19". Could have been allocated to Freight car 19 or 19W.trams, tramways, brakes, tramcar component, preston workshops

Photograph shows W class 307 standing on slightly curved track displaying destination "Victoria Bridge" and no route number box attached. The uniformed motorman and conductor stand on the roadway next to the front driver's cab where the trolley pole has been tied down. The conductor wears his coin bag and the driver is holding the tram's key and air brake handle. An elderly male passenger with coat stands at the drop-centre doorway and other passengers are inside. The car body of W 307 was built by Holden Motor Body Builders in South Australia in 1924 as part of a large contract to build W class trams. Victoria Bridge was the termini of both the Collins Street and Victoria Parade cable tram that closed in 1929 and the Mont Albert electric tram from Union Road, via Whitehorse Road and Kew Junction. Perhaps this photograph is of the Mont Albert terminus although the curved track suggests otherwise.Yields information about early W class tramcars . Black and white photograph with penciled dates on rearPencil writing reads "Between 2/9/24 & 19/3/28" trolley pole, drop-centre, w class, tram 307, victoria bridge, route number box, key, air brake handle, car body, holden motor body builders, mont albert, termini

Significant in being a detailed set of instructions for parking trams, hand overs, relief, responsibility for the security of the tram, including leaving the tram unattended. Regrettable incidents have happened. Issued 1961. Reg item 3459 has a more detailed set of instructions.Single foolscap sheet titled "Special Order to Motormen (49/1)" giving instructions regarding 1) Responsibility (for trams), 2) Relief on the road, 3) Controller key, 4) Air brake handle, 5) leaving tram unattended. Dated 20 July 1961. Printed from wax stencil. See Reg Item 3459 for 25-1-1965 issue and 5371 for an undated issue. Image of item added 20/10/2013.trams, tramways, ballarat, trams, secv, instructions, operations, braking

Significant in being a detailed set of instructions for parking trams, hand overs, relief, responsibility for the security of the tram, including leaving the tram unattended. Regrettable incidents have happened. Issued 1965. Follows on from Reg item 261 an earlier version, but with less detailed instructions and no explanation.Two foolscap duplicated sheets titled "Special Order to Motormen (49/1)" giving instructions regarding 1) Responsibility (for trams), 2) Relief on the road, 3) Controller key, 4) Air brake handle, 5) leaving tram unattended with definition, general precautions, special precautions - such as parking the tram at Lydiard St North, parking trams at City Loop and 6) an explanation on the braking system at either end of the tram. Dated 25 January 1961. Printed from wax stencil and stapled along the top edge. Signed by F. K. White Manager. See Reg Item 261 for 9-1961 issue and 5371 for an undated issue.trams, tramways, ballarat, trams, secv, instructions, operations, lydiard st nth, city loop, braking

Yields information about the instructions about tram operations, safety instructions and leaving trams.Two foolscap duplicated sheets titled "Special Order to Motormen (49/1)" giving instructions regarding 1) Responsibility (for trams), 2) Relief on the road, 3) Controller key, 4) Air brake handle, 5) leaving tram unattended with definition, general precautions, special precautions - such as parking the tram at Lydiard St North, parking trams at City Loop and 6) an explanation on the braking system at either end of the tram. Undated. Printed from wax stencil and stapled along the top edge. Signed by F. K. White Manager. See Reg Item 261 for 9-1961 issue and Reg item 3459 for a Jan. 1961 issue. trams, tramways, braking, instructions, sec, emergency, driver training

Newspaper Clipping from the January 17 2003 issue of The Courier, Ballarat magazine known as "extra" in the cityscape Section, pages 6 and 7, titled "Society keeps history alive". Written and photographed by Julia Hodges features a photo of the El-Moussalli family on No. 45, an interior view of No. 45, a controller top (No. 40), sign, Sam Boon inside a tramcar, air gauge and brake handle (45), interior shot of depot from roof of No. 1 and end view of No. 1. Text includes comments from Sam Boon about working on the trams, their history, and some facts about the Museum. Features 8 photographs. See images for details.btm, sam boon, museum operations

One Hundred page book with nine fold out plates tipped in, green card titled "The Westinghouse Brake - Reference Book", published by Westinghouse Brake Co. in 1904. Text has been sewn into sections and then bound into the book. Plate inside front cover, has been printed in colour showing the extent of the use of the Westinghouse brake system that had been adopted on the various railways. Plat 110E (page 43) has an orange plastic component acting as a brake handle and showing how the various ports and parts interrelated in the valve. Inside the back cover are two loose folded sheets, plate 209 and 209A, Improved triple valve and the "Graduating Release Valve", dated August 1905. Covers compressed air brake systems on railway trains, showing how they are designed, operated, parts listing and has a number of pasted in erratum in the book. "Colin Rutledge" stamped on top of page 1 and inside front cover. On cover written in black ink "Melbourne Office, WB Co. of A, Jan '11"trams, tramways, westinghouse, railway brakes, equipment, compressors, carriages

This chainsaw was one of the earliest models sold in Australia. It was manufactured by the Lombard company which was established in 1894 when Nathaniel Lombard developed the first practical water wheel governor in Roxbury, Massachusetts, USA. In 1904, the company moved to Ashland, Massachusetts. During the first World War, Lombard Governor produced hydraulic lathes for the manufacture of artillery shells At the conclusion of the war, Lombard expanded into the areas of chain saws and plastic molding injection machines. This model, the L-30 was only produced for 2 years from 1962 - 1964, primarily due to safety concerns and the fact that it did not have any way to sharpen or tighten the chain. This chainsaw was sold by Mann of Wodonga and donated to the Wodonga and District Historical society by David Mann, owner and manager of Mann Wodonga.This item is significant as it was produced for a limited time. It was also sold by a prominent Wodonga business.A single operator chain saw from Lombard, Ashland, Massachusetts, USA. The chainsaw was relatively lightweight but had no safety features such as a chain brake. It was made primarily of sand cast magnesium. The main cylinder was constructed of aluminium with a cast iron sleeve. It had a manual oil pump, the crankshaft operated on ball bearings and it had a maximum rpm of 4,500. See the Model profile in the accompanying Media item for details.On side of fuel tank: "ONE HALF PINT/SAE-30 OIL/ FOR EACH/ GALLON GASOLINE/ MIX WELL IN SEPARATE CONTAINER/BEFORE FILLING" On opposite side: "STARTING INSTRUCTIONS 1: FILL FUEL TANK WITH PROPER FUEL MIXTURE ( AS NOTED ON TANK) 2. FILL OIL RESERVOIR WITH #30 MOTOR OIL 3. CLOSE CHOKE, MOVE LEVER BACK TOWARDS AIR FILTER 4. HOLD THROTTLE WIDE OPEN 5. PULL STARTER HANDLE SLOWLY UNTIL STARTER ENGAGES, THEN GIVE IT A SHARP YANK 6. AS ENGINE WARMS UP, EASE CHOKE LEVER TO OPEN POSITION"hand tools, vintage chainsaws, david mann, mann wodonga

Used by drivers to control the brakes on an air-braked tram. Designed to fit a Westinghouse self lapping W type brake valve.An essential part for the control of an air-braked tramcar.Brake handle or key consisting of cast steel handle and a welded section that fits into the brake valve. The angled section allows the handle to be removed when the brake is fully applied.tramcars, trams, brakes, westinghouse, drivers