This anvil was once the property of Warrnambool Ports and Harbours. It is associated with the shipping trade and wold have been used by a blacksmith or tinsmith for forging and shaping metal. According to Pliny, the anvil is supposed to be invented by Cinyra of Cyprus, but it was probably much older. There has been very little change in the basic design of the anvil since Greek and Roman times. This anvil is significant for its association with the local government body of Warrnambool Ports and Harbours, which is of local historic significance. It is also significant for its association with blacksmiths and tinsmiths, which are rare trades today.Anvil, small, for use by blacksmiths and tinsmiths.It was once the property of the Warrnambool Ports and Harbours.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, anvil, blacksmiths, tinsmith, tools, trades, warrnambool ports and harbours

This anvil once belonged to Goodall and Sons, who were blacksmiths in Terang. The smith was called upon to do a variety of work. In the early 1900s he was often the nearest person to be able to perform an engineer’s services for many miles around. An anvil is used by blacksmiths to forge and shape his work pieces. The conical horn is used for hammering curved work pieces. The anvil is a common tool of the blacksmiths (‘smithies’) and other metalworkers. There has been very little change in the basic design of the anvil since Greek and Roman times. Henry Goodall (1870-1936) Henry Goodall was proprietor of garages as H. Goodall & Sons Pty. Ltd., at both Terang (McKinnon and High Streets) and Mortlake (Dunlop Street). His business was in operation in at least in 1916 and perhaps well before, considering the date of the tyre bender and its use for wagons with wooden wheels. It was still in operation in 1953, chasing up debtors in Mount Gambier Court. Amongst the employees of H. Goodall & Sons Pty. Ltd. was Ernie Entwistle, a blacksmith (a soldier who died in 1916 ) and Alfred Hodgetts, radio expert (killed in a fatal accident in 1943, when he was in his early 30s ). Henry Goodall was involved in the community as a Justice of Peace, a deputy coroner, President of the Mortlake Hospital, trustee of the Soldiers’ Memorial Hall, and as a prominent Freemason. He and his wife had two sons (Charles and John) and one daughter (Mrs. Chas. Newton, of Skipton). The anvil is locally significant as it was used by a local company in Terang and Mortlake in their blacksmith, wheelwright and garage business. It is an example of the tools of the blacksmiths’ trade in Victoria in the early to mid-1900s. Anvil, single horn, used as a tool by blacksmiths and metalworkers. Large block of metal with a flat top face, a conical horn on one side and a ‘v’ shape on the other. The anvil’s base has a squat stand and sides that are a variety of shapes. This anvil once belonged to Harry Goodall & Sons, blacksmiths of Terang. C. early to mid-1900s.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, h. goodall & sons of terang, terang blacksmith, h. goodall & sons pty ltd, mortlake, ernie entwistle blacksmith, alfred hodgetts radio expert, charles goodall, john goodall, mrs. chas. newton nee goodall, trade tools, blacksmith tools, metalworking tool, forging tool, terang 1900s, warrnambool district 1900s, anvil, blacksmith’s anvil, single horn anvil

As quoted from Wikipedia, ‘An anvil is a block with a hard surface on which another object is, struck. The block is as massive as it is practical, because the higher the inertia of the anvil, the more efficiently it causes the energy of the striking tool to be transferred to the work piece’. The lightstation’s anvil is a red-painted iron block with a conical beak or horn at one end that was used for hammering curved pieces of metal. It would have stood on a heavy free-standing pedestal, such as a large tree stump, to allow complete access to the item being hammered. Some anvils display the manufacturer’s name in the metal on the side, but this is not the case here, and its age, although unknown appears to be quite old, perhaps c.1900. It appears to have had a lot of use, and although no record of this survives, it is presumed that a forge operated on site for hammering, cutting, shaping and repairing tools such as bolts, nails, hooks, chain segments, pulley blocks, hinges, crow bars, picks, chisels, horseshoes and harness hardware. A hames hook (which forms part of the collar worn by a draught horse) survives at the lightstation as do many other heavy metal tools and pieces of equipment. The anvil is an example of the necessary resourcefulness and self sufficiency practiced by lightkeepers working and living in a remotely located workplace and home, and many of the iron items in the collection may have been repaired or even made on its working surface. As a lightstation manager Chris Richter used the anvil to manufacture pulley blocks for sash windows, repair brass door hinges & sharpen cold chisels, crowbars and picks and other lightkeepers have used this anvil for many fabricating jobs such as manufacturing ducting for the generator room ventilation system."The lightship only came in every three months with supplies and there would have been repairs to do between visits from a blacksmith - who would have had to travel on the ship. Also, the ship was only anchored in the bay long enough to unload supplies and collect and deliver lightkeeping staff – probably not enough time to get much smithy work done – especially if the weather packed it in and the ship had to depart. Lightkeepers in our time had to be self sufficient, resourceful and innovative and I imagine that would have been the case in the past." It has second level contributory significance.Red painted blacksmith's anvil.

Workshop scene . Two workmen in a blacksmith shop with Forge Anvil and vice. Male on left Percy Ledger. Part of a set of photos of Wimmera Motor Works.stawell industry

A Bick or coopers anvil is a tool used to fabricate the iron hoops that a cooper would produce to hold a barrel together. The hoops are first cut to the required length and then beaten into shape and riveted on the Bick or Tee anvil. They are then driven into place on the barrel with a hammer and iron tipped, wedged shaped driver.The subject Item is used as a tool to produce steel hoops for wooden barrels but at this time cannot be associated with an historical event, person or place, provenance is therefore unknown, item assessed as a collection asset as it is believed to have been produced and used before 1950.Bick Iron or Coopers Anvil, attaches to a removeable wooden base, Metal anvil with pointed end & flat shaped topNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, brick iron, anvil, coopers tools, barrel making, barrels

See NA2323 for history of donor and photo.Anvil - made from forged steel and used by the blacksmith as a table to hand forge hot steel etc.rural industry, farm machinery, trades, blacksmithing

Index, ill, p.192.non-fictionThe homes of Irish writers is an evocative record of the links between Irelands' best known writers and the surroundings in which they lived.irish writers - biography, literature - ireland

Index, ill, p.368non-fictionToday it is almost forgotten that the D-Day landings of 6 June 1944 did not bring a single, isolate victory. As this masterly book reminds us, that first foothold on enemy shores was won at enormous cost, and for two months afterwards a fierce battle raged for the control of Caen. Using the personal accounts of those who took part in the fighting, both Allied and German, and of the French civilians caught up in the conflict, McKee brilliantly reconstructs the bitter struggle that ravaged Normandy throughout the summer of 1944 before the Allied position in Europe was finally secured.world war 1939-1945 - campaigns france, d-day - normandy

Faded brown cloth cover with embossed detailing on cover and spine 'Sparks and Sounds by J Whiteman ' xi; 195 pages ; Illus; 19cm;Handwritten inscription on front page '3' Stamp on various pages 'Kilmore Mechanics Institute Signature; ' Faithfully yours John Whiteman'kilmore mechanics institute library.

A relic from the principal's garage area near the house (Burnley College Principal's house was demolished in 1980)Small cast iron metalworking tool (very rusty). "A relic from the Principals' garage."metalworking, principal, tool, burnley college

non-fictionAn example of a cover created by using a diecast stamp in its printing and gilding and by a colonial die cast stamp pioneer in booming Melbourne.binding, engraving, lithography, printing, publishing, george robertson, roeszler, stamps, melbourne

This work was completed by a male Diploma student at the Gippsland Centre for Art and Design (GCAD). Ceramic sculpture features an anvil shape on wheels. If you can assist with information on this artist or artwork please use the email link below.ceramics, gippsland campus, anvil, sculpture

Blacksmithing was a subject taught at the Ballarat School of Mines. This image was reproduced in the 1914 Ballarat School of Mines Annual Report.A number of men train on three blacksmith forges at the Ballarat School of Mines. The men are working in pairs on anvils and appear to have two supervisors students, ballarat school of mines, blacksmith, forge, anvil, blacksmithing, students, ballarat school of mines, blacksmith, forge, anvil, blacksmithing

metal/iron anvil with 2 different-sized, shoe-shaped with a rectangular metal upright probably used to attach the anvil to a workbenchshoes, anvil, cobbler, fotwear

Anvil's Star won the Bendigo Pacing Cup on the 24 January 1997, followed by Desperate Comment and No Equal. Anvil's Star owned by RM Cameron & K Kotzikas, was trained by RM Cameron and driven by Ricky May. Anvil's Star raced from 1995 (3yo) through to 2001 (9yo). Career: 17 wins 22 seconds 11 thirds 116 starts.Two colour photographs, one small one large in a brown, black, gold frame. At the top: Bendigo Harness Racing 24-1-97/ Gerard K House Pty Ltd Bendigo Pacing Cup / C9 or Better At the bottom: Left corner: Distance 2400 metres/ Mile rate 1.59.3 / Greg Matthews Photos - Stawell Centre: Anvils Star (Vance Hanover - Venetian Star) / Desperate Comment 2nd / No Equal 3rd Right corner: Owned by- RM Cameron & K Kotzikas/ Trained by RM Cameron / Driven by Ricky Maybendigo harness racing club, horses, race, winner, bendigo trotting club, pacing cup, driver, trainer, owner, 1997, anvils star, rm cameron, ricky may, k kotzikas, desperate comment, no equal, robert cameron, r may, r cameron

Drawing of the anvil where the ''Welcome Stranger'' was cut up.bendigo, history, golden days historical exhibition

Shoe-shaped metal anvil with a metal piece at right angles to the shoe shapeshoes, anvil, cobbler, footwear

Secateurs used by students. Given by Alice Tucker (née Glascodine) who graduated in 1933. Pair of metal anvil-action secateurs used by students at Burnley College with spring. Rusty.secateurs, students, alice tucker nee glascodine, 1933

James S Steele tool boxVice small used for very delicate work. Has a small anvil attached. 90mmL x 65mmW.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Black and white photograph: blacksmith's anvil. Written on back of photo in blue pen 'Golden Days Historical Exhibition' 12 to 17 August, 1960. Reputed to be the anvil on which The Welcome Stranger (210 lbs) nugget was cut up on Dunolly 1869. Present owned (1960) Mr. Noel Gray, Backhaus Street, Long Gully, Bgo.bendigo, history, golden days historical exhibition

Mr Wehner's family was a prominent family in Orbost from the late 19th C. Hermann Wehner founded Wehner's blacksmiths at Orbost in 1889. Oswald began working with his father in 1910. In 1947, Ossie's son Tom started blacksmithing, retiring in 1991 and closing the business. The building remains in Nicholson Street, Orbost. A photograph is significant because it is of one of Orbost's blacksmiths. The Wehner family of blacksmiths (1889-1991) worked in Orbost and were the last blacksmiths operating until 1991. B/White photograph of a man wearing a leather apron and glasses and standing in front of an anvil. Holding blacksmiths tools. The photo is a copy, not an original.

Two Men working at workbench and Forge at Young and Ledgars Engineering Works. Anvil at right of photograph.stawell wimmera motor vehicles