This generator is associated with James Oddie, and possibly Henry Sutton. Early Grey generatorelectricity generator, ballarat power station, ballarat electricity supply

Features a photo of a cooking lesson in Electra Hall and the Mayor of Ballarat driving No. 30, following its conversion to the Ballarat style of trams in September the previous year at the time of the inauguration of the new rolling stock. Notes the progress in Ballarat in the last 18 months, reconditioning of the tram lines, the "new" trams, the changeover from DC to AC, new sub-stations, distribution networks and electrical development, including work at the power station. Has an "Important Notice" advising readers of the scope of the Departmental Journal "CONTACT" and its relationship with the social and sporting activities magazine "SEC MAGAZINE". See Reg Item 3011 for a print of the photo of No. 30. Record revised 3/4/2019 to add digital images with those from Andrew Cook CD and to include an item titled "A Page from Geelong" about a fractured pole, two minutes of silence and the impact on power generation and a thankyou letter. Demonstrates the reporting and promotion of SEC activities to its staff and public in Ballarat.Photocopy of an article in the State Electricity Commission of Victoria Magazine, Contact, Vol 1, No. 1, May 1936 titled "Progress in Ballarat". trams, tramways, sec, ballarat, electricity supply, tramcars, power station, electra hall, geelong, poles

Set of documents - copies and originals titled 2440.1 - Copy of original document on heat sensitive photocopy foolscap size paper - Photostatted. 2440.2 - copy - from above on toner printed photocopy and reduced to A4 size - made June 2003 by Alan Bradley. 2440.3 - original copy on foolscap paper, stapled in top left hand corner - two copies held. Document details General rules such as hours of duty, fire, accidents behaviour; Depot Operation - Safety Rules detailing many procedural rules about work safety on trams. The 5th page details rules governing track repair employees, such as safety, breaking of rail circuits and use of bitumen boilers. See Also Reg Item 3705 for an earlier version. 2nd copy added 12/5/2021 - original copy. Scanned and added. 2440 - Copy of original document on heat sensitive photocopy foolscap size paper - Photostatted. 2440 - copy - copy from above on toner printed photocopy and reduced to A4 size - made June 2003 by Alan Bradley. Document details General rules such as hours of duty, fire, accidents behaviour; Depot Operation - Safety Rules detailing many procedural rules about work safety on trams. The 5th page details rules governing track repair employees, such as safety, breaking of rail circuits and use of bitumen boilers. See Also Reg Item 3705 for an earlier version. 2nd copy added 12/5/2021 - original copy. Scanned and added.Demonstrates a SECV Safety and procedures document.Photocopy and original of 'State Electricity Commission of Victoria / Ballarat Electricity Supply and Tramways / Rules Governing Depot Employees' consisting of four pages.trams, tramways, sec, safety, depot, rules, instructions

Yields information about the costs of locally manufactured signal boxes for used on the tramways.Single sheet, demi foolscap, SEC Ballarat Electricity Supply and Tramways Memo giving the costing of locally manufactured signal boxes, resistances and contactors for the tramway - 10 boxes made up. Not formally dated, but c1939.Has been filled in using ink.trams, tramways, overhead, signals

Yields information about the way costs within the SEC was allocated between the tramway and electrical distribution services in Ballarat., Yields information about the way costs within the SEC was allocated between the tramway and electrical distribution services in Ballarat.Two page carbon copy of a memo, SEC Ballarat Electricity Supply and Tramways Office, dated 25/10/1938, from the Manager to the Tramways Inspector advising of the distribution of costs in relation to poles used for both tramways overhead and power distribution.Has on side margin, in red ink, Tramways overhead foreman to note.trams, tramways, overhead, trolley wire

Yields information about the correspondence that was sent to various parties about the opening of tram tracks for underground services in Ballarat.Letter on SECV letterhead, "Ballarat Electricity Supply and Tramways", not dated, gives phone number, address, duplicated in blue ink, titled "Crossing Under Tramway Tracks", consisting of two foolscap sheets and one quarto sheet, pinned together in the top left hand corner. Would have been written as a base letter to go various bodies, has a Mr. Hornabrook's signature printed on it. Outlines the processes that have to be undertaken in order to install pipelines under tram tracks. Allows for Emergency installations, gives depths and installation requirements. The third sheet is an application form to install the service. See Reg Item 4946 for Bendigo, possibly used as a model for this document, given Reg Item 4943 correspondence.trams, tramways, letters, sec, tram track

Yields information about the correspondence between the SEC Ballarat and Bendigo offices about the opening of tram tracks for underground services.Carbon copy of a typed letter on quarto green paper, written by the Manager, Mr H. Hornabrook, to the Manager Bendigo ES, copy to Ballarat Manager Electricity Supply seeking information about Bendigo's procedures when excavation for services are made under tram track. Has an SEC date stamp of 15 April 1937.Various initials and notes in red pencil or ink.tram, trams, letters, sec, bendigo, tram track

Gestetner reproduced 'State Electricity Commission of Victoria / Ballarat Electricity Supply and Tramways / Rules Governing Depot Employees' consisting of three pages and a single page "Rules Governing Track Repair Employees", with welding repair notes on the rear in pencil and ink showing location and where welds done and some dates (1958). Document details General rules such as hours of duty, fire, accidents behaviour; Depot Operation - Safety Rules detailing many procedural rules about work safety on trams. The 4th page details rules governing track repair employees, such as safety, breaking of rail circuits and use of bitumen boilers. See Also Reg Item 2440 and 2441 for copies of later versions. Was originally located with item 3692 - 1958 Trackwork diary.Yields information about the procedures, instructions and rules that tramway (depot and track) worked under in Ballarat.Four page duplicated foolscap document stapled in the top left hand corner.trams, tramways, sec, safety, depot, rules, instructions, welding

Photocopy of an article in the State Electricity Commission of Victoria Magazine, Contact, Vol 3, No. 2, Aug 1938 titled "The Development of Ballarat's Electricity Supply". Two A3 sheets. The item with six photographs details the history of the development of Ballarat's Power Supply. Details development of the initial power supply in Dana St, the take over by ESCo, DC power initially, expansion, introduction of AC in 1925 to Ballarat, the takeover by the SEC in 1934, changeover from DC to AC, expansion to outlying areas, Buninyong, Creswick etc. Gives description of installed plan, boilers, storerooms and the stores systems. Has photos of the Dana St. building, Ballarat A power station, Ljungstrom Turbo Alternator and three of the stores area. Record revised 3/4/2019 to add digital images with those from Andrew Cook CD. Each item had a thin strip of paper attached by staple to the top left hand corner, giving the Vol. No. details.On rear of 2nd A3 sheet in blue ink details of contact with the BTM by M. Sayers prior to sending the material.trams, tramways, sec, power supply, power station, ballarat a power station, esco

Demonstrates communication methods to the staff of the SEC and magazine printing. Yields information about staff and the SEC benevolent system for its workers.Magazine - 32 pages printed on gloss paper with colour cover - titled 'SEC Magazine June 1936 Vol 1 - June 1936". Has a forward by the Chairman of the SEC, Mr. Francis Clements as the first magazine. Published 1 June 1936. Provides news about the SEC itself, personal Notes and Anecdotes on many people including clubs and societies. Includes notes on the late Mr. W. Knox, the ESCO Chief Accountant in Ballarat, the Electricity Supply and Tramways Employees Social club, Bendigo, Geelong, sporting clubs and fund raising for the Children's Hospital. See Reg Item 8036 for a 1937 timetable in a red folder marked G G Jobbins who became Chairman in 1937. 2nd copy added 22/6/2021trams, tramways, esco, sec, ballarat, publicity, sports, social club

Form used to advise crews that they had been reported for a breach of Rule No. or Special Order No. etc. Has space for the date (1930s), Signature, date, time, and trip. Seeks the person's explanation which had to be in writing. Used post the SEC takeover of the Ballarat system. Headed the Electricity Supply Department of the SECV. See item 9123 for the subsequent form used.Demonstrates a form used to advise crews of a breach of the rules etc and seeking an explananation.Preprinted form - No TYE1-38, on plain off white paper.tramways, forms, sec, secv, rules, behaviour

2971.1 - Photocopy of the cover of the State Electricity Commission of Victoria Magazine, Contact, Vol 3, No. 3, Nov 1938 . Features Miss Winifred Gurr of the Queenscliff office, as the Good Fairy, Electricity at the Geelong Centenary Celebrations. Has the SEC logo or motif on the top of the cover. 2971.2 - Photocopy of an article in the State Electricity Commission of Victoria Magazine, Contact, Vol 3, No. 3, Nov. 1938 titled "The Development of Ballarat's Electricity Supply". One A3 sheet and one A4 sheet. The article details the SEC's part in the celebration of Geelong's Centenary Celebrations in October 1938. Opened by Mayor, Alderman C. N. Brown. Details the lighting needs for the celebrations, 400kW, the large motor traffic who came to see them, damage due to Gales, public buildings illuminated and the procession. Includes details of the decorated trams - 1500 paper floors and 400 lamps. Has photos of Moorabool St, a decorated Pengelly tram and Power Station. On page 4 is a letter from an American visitor, Dorothy Bradner congratulating the tramways. Record revised 3/4/2019 to add digital images with those from Andrew Cook CD. Images added of pages 22 and 37 Page 22 - image 12 - titled "The Provincial Big Three" - photos of the Managers of the Ballarat, Geelong and Bendigo Regions - Mr. T. A. Farr, Mr. H.N. Hornabrook and T.H. McNaught. Page 37 - image 11 - Staff movements of General Interest - records the retirement of W. White Tramways Inspector Geelong, and appointments - W. J. McKinnon appointed as Tramway Inspector and Mr. C. S. Ball, appointed Senior Traffic Inspector. Each item had a thin strip of paper attached by staple to the top left hand corner, giving the Vol. No. details. trams, tramways, sec, geelong, geelong centenary, power station, decorated trams, letters

Presented to Mrs. H.J.Wheeler with the compliments of the State Electricity Commission of Victoria, Electricity Supply Department, Ballarat Branch, on the occasion of the "Switching On" of the Electricity Supply to Learmonth,19th March,1938.A pair of scissors that were used to "switch on" the electricity supply to Learmonth on the 19th March 1938. Gold Scissors in black box, with blue and white lining.Johns and Johnsonlearmonth, boxed gold scissors, electricity

Duncan McDougall was associated with the pioneering X-rays conducted by the Ballarat School of Mines in 1896. He was in the Mendelssohn Choir, and was associated with Professor Ross from University of Western Australia. The Ballarat Courier reported on 20 July 1896:"The Ballarat Courier reported on 20 July 1896 Thanks to the energy of the staff of the School of Mines Ballarat and particularly to Messers F J Martell and Duncan McDougall the assistance of Roentgen xrays will soon be available, for the relief of suffering at this institution. On Wednesday evening 22 July 1896 a number of ladies and gentlemen witnessed a series of experiments with the Roentgen x rays." Duncan McDougall later worked at the Kalgoorlie School of Mines as a lecturer in physics and mathematics. on 19 February 1905 the 'West australian' newspaper announced: " Mr Duncan McDougall, formerly of the Ballarat, and later of the Maryborough Schools of Mines, was appointed to succeed Mr. Hart. Mr. McDougall had also charge of the branch class at Midland Junction. In both cases his work proved thoroughly good. The alterations in the trades class regulations will cause all the students in these classes to take up the study of this subject. I have every confidence that Mr. McDou gall will handle these large classes as successfully as the classes he had last year." By 1925 McDougall is being reported in the Perth Daily News: "Duncan McDougall, lecturer on electrical engineering and physics at the W.A. School of Mines, put forward a scheme for reducing the cost of mining in Kalgoorlie. He contended it was the duty of the State and Federal Governments to establish a central electricity generation plant in Kalgoorlie and supply power to the mines at not more than 1/2d a unit, at 3/4d per unit for winding only, and at 2d per unit for lighting. He suggested, the transmission of this power over a radius of 25 miles from Kalgoorlie." (06 May 1925)Photograph of a man in a shirt, bow tie and jacket, holding a scroll and wearing glasses. He has two books beside him on a table. The man is Duncan McDougall, and is portrait was taken in the Charlie Farr studio at Maryborough, Victoriaduncan mcdougall, mcdougall, x-ray, xray, xray, ballarat school of mines, choir, mendelssohn, kalgoorlie

Information from Norman F. Dalton: Ballarat had a reticulated DC supply in the early part of last century and in 1905 had sufficient generating capacity to enable the trams to be changed from horse drawn to DC electricity. The use of electricity increased with the main power station located on Wendouree Parade, near Webster Street, under the ownership of The Electric Supply Company of Victoria. AC generating plant was installed in 1925 and conversion to AC proceeded. In 1934 the company was taken over by the State Electricity Commission Victoria (SECV) and more AC generation was installed and the changeover of customers was accelerated. This is around the time that the Synchronome Frequency Checking Mast Clock was installed at the Wendouree Parade Power Station. The SECV Annual Report of 1921 states: ::Section 11 of the act directed the COmmission to enquire into the question of securing the adoption of such standards of plant and equipment of a system, frequency and pressure for the generation and distribution of electricity as will admit of the efficient interconnection of undertakings throughout the State. In 1934 when the SECV took over the Ballarat operations the question of linking with the State grid had been a planned operation for some years but due to financial considerations had hindered it and in fact would continue to do so for a further 10 years. So while the need for close frequency control for interconnection was hardly an issue, the need to keep electric clocks correct was important, particularly as this item was a frequent sales point to cover the inconvenience and sometimes expense of converting from DC to AC. The clock is a very accurate pendulum clock with provision for varying effective length during operation for precise time regulation. There are two normal time dials and one is controlled by the pendulum and the other is operated by the system frequency. When the clock was in use it was installed by the MEter and Tests Laboratory and the time was checked daily by radio time signals. The two dials were repeated in the operators control panel in the Power Station. A maximum deviation between the two dials was set in the operating instructions (eg 5 seconds) and the operator would correct this when necessary by remote manual alteration of the turbine governor set point. The clock was used to drive and regulate a system of "slave" clocks which were used to display the time in various locations around the power station. A slave clock is a simple clock which is driven by a small electric motor, its accuracy is regulated by the master clock every 30 seconds to ensure that it and all the other slave clocks in the station are on exactly the right time; slave clocks were placed in various locations, from common rooms to workshops. A master clock could potentially run thousands of slave clocks at one plant. The clock also contains a rectifier. A rectifier is a device that is used to convert AC power to more stable DC current.Two clocks in a timber case. Both are electric, one is powered by the main pendulum mechanism, the other is a self contained electric clock. The main mechanism is of the gravity arm and roller type, which sends an impulse to the slave clocks every 30 seconds. The This Synchronome Frequency Checking Master Clock was used at the Ballarat Power Station. Below the main section of the case is a smaller cabinet containing a rectifier to provide consistent DC power for the clock. The rectifier was made by the Victorian company Hilco, which was located in Burwood. There is a high chance this is not the original rectifier from this clock as there appears to be brackets to hold a larger device in the space the rectifier occupies.Front below main clock face on front of case: "Patented Sychronome Brisbane" Lower left-hand clock face: "Frequency time" Lower right-hand clock face: "Standard Seconds" Synchronous electric clock mechanism on door (Frequency time clock): >200/250 V. 50~ >"Synchronomains" Made in England >Direction indicator for clock starting switch >"To start move lever in direction of arrow and release" >"Patent applied for" Mechanism for "standard seconds" clock: >"English Made" >"Patented" >Serial number "321" >0 above right-hand pillar on front-plate Mechanism for "standard seconds" clock: >"English Made" >"Patented" >Serial number "321" >0 above right-hand pillar on front-plate Mechanism for main clock face: >"English Made" >"Patented" >Serial number "8751" >0 above right-hand pillar on front-plate Inside case, back panel, top enamel plate: >Seconds Battery + Pos. > Battery Common or - Neg. >1/2 min dials Inside case, back panel, bottom enamel plate: external seconds dial Inside case, right hand side, electrical knobs: two switches, both "A.C. mains" Pendulum rod, below suspension spring: Serial number (?) 0000005 Rectifier in bottom cabinet: >"Hilco Rectifier" >"A.C. Volts 230/240" >"Model 1060/S" >"A.C. Amperes" >"Serial No. 1060/S >"Phases 1" >"D.C. Volts 6" >"C.P.S. 50" >"D.C. Amperes 1" >"Made in Australia by Hilco Transformers McIntyre St., Burwood, Victoria." Bakelite electrical plug: makers mark Lower cabinet, RH side panel, pressed tin plate: "AC" (upside down) Brass speed adjustment, outer right RH side: "S" and "F" Ivory and wood pendulum beat ruler: >Ruler, with 0 in centre and numbers 1-5 in ascending order from centre on left and right. > "Synchronome Patent." Steel plate, back panel, inside case, right hand side: >N R A" (descending) >"2191" serial number/part number Face of main clock: "Synchronome Electric" synchronome frequency checking master clock, electricity, state electricity commission, wendouree parade power station, secv, clock, time, pendulum, electric supply company of victoria, norman f. dalton, ballarat power station, rectifier, slave clock

Arthur D. Senior was born on 13 November 1905 at Colac, Lancashire, England. He came to Ballarat in 1927 and was a student, and later a part time evening instructor in Electrical Mechanics, at the Ballarat School of Mines. An electrical engineer at the Electricity Supply Company (Ballarat), he retired from part time work at the Ballarat School of Mines in 1965 having started in 1931.Photographic Portrait of Arthur Senior wearing a Ballarat School of Mines blazer.ballarat school of mines, arthur donald senior, arthur senior, blazer

Graham Beanland's logbooks for the Electrical Branch Hydro-Design Section. Beanland was later the Principal of the Ballarat School of Mines. Four foolscap books with handwritten notes. .1) includes Richmond Power Station, Midworth Statino Load Indicator Transmitter, Thomastown Experimental Line (220v), The story of Richmond, Power factor curves, dryout of 6.6. KV motor, etc .2) Pressure Tests at Mt Waverly Pump Station, Shunt capacitor Bank for Bendigo, Shepparton Main Substation, Boronia Level Crossing - Supply continuity. commissioning Warragul Main Sunstatin, Tests carried out on Sedgewick installation, Bendigo Main Substation, MMBW Instalation at McVeighs, The South-Western Story, etc .3) History of Kiewa Hydro Scheme, Kiewa Scheme Layout Plan, Kiewa No. 4 Main Transformers, Motor operatied Power-Station lift, etc (included flyers "Power From Kiewa" and "White Coal", etc .4) Newport B and C Power Station, Yarraville Maintenance Workshops, Richmond and Brusnwick Terminal Stations, Rubicon-Eildon Area, Kiewa No.3 Power Station, etc.graham beanland, electricity, kiewa power station, newport power station, yarraville, richmond terminal station, brunswick terminal station, white coal, coal, boronia level crossing lights

Used at the Ballarat School of Mines and the Ballarat Technical Art SchoolThis collection of examinations is significant because of its completeness with the full range of examinations between 1914 and 1950.Large leather bound books, with leather spine, containing all examinations held at the Ballarat School of Mines (including the Ballarat Technical Art School and Ballarat Junior Technical School). The examination papers were supplied and printed by the Education Department, Victoria. Examinations include: Agriculture, Algebra, Architecture, Arithmetic, Applied Mechanics, Assaying, Biology, Botany, Boilermaking, Building Design, Blacksmithing, Bricklaying, Carpentry and Joinery, Coachbuilding, Cabinet Making, Civil Engineering, Cabinet Making, Commercial, Chemistry, Engineering Drawing, Economics, English, Electrical technology, Electricity and Magnetism, Electric Wiring, Electric Welding, Electrical Fitting, Electrical Trades, Food Analysis, Geology, Geological Mapping, Graphics, Geometry, Heat Engines, Heat Treatment, Hydraulics, Hand Railing, Instrument Making, Millinery, Milling and Gearouting, Machine Shop Practice. Metal Founding, Mining, Metallurgy, Mineralogy, Mathematics, Motor Mechanics, Mine Surveying, Mining Mechanics, Petrology, Physics, Painting and Decorating, Pattern Making, Plastering, Plumbing and Gasfitting, Printing, Refrigeration, Spelling, Science , Shorthand, Surveying. Signwriting. Sheet Metalwork, Toolmaking, Ladies Tailoring, Trigonometry, Typewriting, Welding, Commercial Geography. Millinery, Dressmaking, Needlework, Decorative Needlework, Architecture, Building Design and Construction, Art (Composition in Form and Colour), Art (Casting Clay MOdels) Art (Drapery), Art (Drawing the Human Figure From Casts), Art (Drawing the Antique from Memory), Art (Drawing from Memory); Art (Drawing Plant Forms from Nature, Art (Drawing Plant Forms From Memory), Art (Drawing from Models and Objects), (Drawing From a Flat Example). Art (Drawing in Light and Shade from a Cast of Ornament or Lower Nature), Art (Drawing Ornament from the Cast), Art (Drawing from Models or Objects), Art (Drawing fro Dressmakers' and Milliners' Fashions), Art (Drawing With the Brush), Art (Drawing from a Flat Example); Art (Modelled Design), Art (General Design), Art (Embossed Leatherwork), Art (Practical Plane Geometry), Art (Practical Solid Geometry), Art (Geometrical Drawing), Carpentry and Joinery, Art (Human Anatomy), Art (Historic Ornament), Art (House Decoration), Art (LEttering), Signwriting, Art (Light Metalwork), Art (Modelling), Art (Modelling the Human Figure from a Life), Art (Stencilling); Art (Wood Carving) Refrigeration, Teaching, Boilermaking, Blacksmithing, Carpentry and Joinery, Coachbuilding and Carriage Drafting, Electric Wiring, Electrical Fitting, Graining and Marbling, Instrument Making , Machine Shop Practice, Metal Founding, Milling and Gear Cutting, Motor Mechanics, Painting and Decorating, Sheet Metalwork, Toolmaking, Printing, Pattern Making, Plumbing and gasfitting, examinations, ballarat school of mines, ballarat technical art school, trades, education department victoria, agriculture, algebra, architecture, arithmetic, applied mechanics, assaying, biology, botany, boilermaking, building design, blacksmithing, bricklaying, carpentry and joinery, coachbuilding, cabinet making, civil engineering, commercial, chemistry, engineering drawing, economics, english, electrical technology, electricity and magnetism, electric wiring, electric welding, electrical fitting, electrical trades, food analysis, geology, geological mapping, graphics, geometry, heat engines, heat treatment, hydraulics, hand railing, instrument making, millinery, milling and gearouting, machine shop practice, metal founding, mining, metallurgy, mineralogy, mathematics, motor mechanics, mine surveying, mining mechanics, petrology, physics, painting and decorating, pattern making, plastering, plumbing and gasfitting, printing, refrigeration, spelling, science, shorthand, surveying, signwriting, sheet metalwork, toolmaking, ladies tailoring, trigonometry, typewriting, welding., dressmaking, needlework, decorative needlework, architecture, building design and construction, art (composition in form and colour), art (casting clay models), art (drapery), art (drawing the human figure from casts), art (drawing the antique from memory), art (drawing from memory), art (drawing plant forms from nature, art (drawing plant forms from memory), art (drawing from models and objects), (drawing from a flat example), art (drawing in light and shade from a cast of ornament or lower nature), art (drawing ornament from the cast), art (drawing from models or objects), art (drawing for dressmakers' and milliners' fashions), art (drawing with the brush), art (drawing from a flat example), art (modelled design), art (general design), art (embossed leatherwork), art (practical plane geometry), art (practical solid geometry), art (geometrical drawing), art (human anatomy), art (historic ornament), art (house decoration), art (lettering), art (light metalwork), art (modelling), art (modelling the human figure from a life, art (stencilling), art (wood carving), teaching, coachbuilding and carriage drafting, graining and marbling, milling and gear cutting, commercial geography, exams, examination book

Information on trams. Includes small photo of Trams 24 & 26, Map of Bendigo Tram routes 1972and 1996, Ballarat No 26 tram, S 164 tram, and No 38 tram. Mentioned is the individual history and where they can be found, operating and non operating trams, different classes of trams. Geelong's Birney Cars, two of which came to Bendigo and the Type G (Birney Safety Cars). Other information includes Nos, First introduced, Last withdrawn, Electrics (motors), Size and Seating/Crush Load. (8 pages).bendigo, history, long gully history group, the long gully history group - bendigo's tram system, battery trams, steam trams, electricity supply company of victoria, toastrack trams, david bromage, bendigo tramways, state electricity commission of victoria, the bendigo trust, chris brownbill, bendigo talking tram, david hoadley, prahran and malvern tramways trust, hawthorn tramways trust, fitzroy northcote and preston tramways trust, melbourne brunswick and coburg tramways trust, north melbourne electric tramway and lighting co, sydney tramway museum, tramway museum of victoria, railpage australia, ballarat vintage tramway, andrew cox, russell jones, australian electric transport museum, birney cars, j g brill & co, bob hawke, adelaide municipal tramways trust, tim blythman, bill winn, john radcliffe

Page 3 of Ray Pearson's Photo Album. Brown card page with two metallic look postcards (landscape format) placed on page using clear plastic photo corners. Both postcard images depict trams in Ballarat. The bottom postcard has come loose of two of it's photo corners (top and bottom on the right) and is not secure on the page. A hand written inscription is written in pencil behind the bottom photograph.Hand written inscription in pencil behind postcard at base of page: W.4. Printed text to left of image on bottom postcard: BALLARAT TRAMS / 1887 to 1971 / A series of four postcards. / NO. 3 LATER ELECTRIC TRAM SYSTEM / In 1934 the State Electricity / Commission took over the Bal- / larat trams from the Electric / Supply Company of Victoria. / During 1935-37 the whole sys- / tem was reconditioned by the / Commission. / For the Coronation of King / George VI, No. 28 was decor- / ated for the occasion. It ran / for three days – 12th, 13th / and 14th May, 1937, and was / painted red and cream. / During the Coronation cele- / brations of Queen Elizabeth II, / the trams carried two flags / mounted vertically fore and aft / on the roof. / Some huge loads were / carried during the second / World War period and owing / to man power shortages, con- / doctresses were employed / from September, 1942 to July, 1946. At one time, the total / reached 23. Printed text to back of bottom postcard: BALLARAT TRAMS / 1887 to 1971 / A series of four postcards. / In the early fifties, loading / on the trams was heavy. When / the lag in housing was over- / taken, however, breadwinners / started to leave the trams and / travel to work in cars. Increas- / ing affluence in the sixties ac- / centuated the trend. Soon the / trams were running with mount- / ing annual losses. Most of the / passengers travelling in these / times were concession holders: / students, pensioners, deserted / wives and T.P.I.'s A fine printed vertical line runs down the centre of the blank writing space to the left of the body text. Above is written: POSTCARD postcard, coronation, ray pearson, vintage trams, ballarat tramway, tram postcard, female conductors, suttons, ballarat tram

Yields information about the SEC in Ballarat and in particular the conversion from DC power to AC.Newspaper clipping from the Saturday Magazine of The Courier 30/6/1984 titled "50 years of the SEC", looking at the history of the SEC in Ballarat, includes the conversion of plant from DC to AC which was not completed until 1968. Notes the two power stations and SEC offices have been moved to Norman St. Has five photos, including a staff photograph with many names, a photo of Bridge St, a collision between a truck and tram 14, SEC advertising and an interior view of Ballarat A. Written by John Dyallsec, ballarat a power station, sec crews, electrical engineering, electrical systems, electricity supply

Yields information about the impacts of the closure of the Geelong system to provide "speaking notes" for Ballarat and Bendigo Managers., Yields information about the impacts of the closure of the Geelong system to provide "speaking notes" for Ballarat and Bendigo Managers.Memorandum, from Engineer and Manager to Manager Ballarat dated 26/9/1960, titled "Trams and Tariffs", reviewing the reduction of electricity tariffs, following the closure of the Geelong system. An announcement was pending. Was delayed due to the cost of restoring the roads in Geelong. Provides instruction or guidance or "speaking points" to the respective managers of Ballarat and Bendigo.trams, tramways, geelong, electricity supply, closure, submissions, publicity

Yields information about the rates for electricity in Geelong and Ballarat., Yields information about the rates for electricity in Geelong and Ballarat..1 - Memorandum to Manager Ballarat from Engineer Melbourne, dated 28/3/1962, forwarding a copy of a series of questions put to the local Manager from the Ballarat Courier and a response from Minister for Electrical Undertakings Murray Byrne. .2 - Report - address to the Minister - 4 foolscap sheets, questions involved the rate for electricity in Geelong prior to the closure of the Geelong system and the current rates, power consumption in Geelong and Ballarat and how much power did the trams used the previous year. All sheets have round edges.trams, tramways, geelong, electricity supply, power supply

Demonstrates the method of advising the Ballarat branch of advertising panels and the advertisers., Demonstrates the method of advising the Ballarat branch of advertising panels and the advertisers.Memorandum on Electricity Supply Department letterhead, quarto paper typed, from Engineer and Manager (Melbourne) to Manager Ballarat Branch, dated 27/11/1959, advising the despatch of advertising panels for use on the single truckers, one per tram - Four Wakefields (Castrol) and one Cinzano and Gia (Wines). Response sought on when installed. trams, tramways, advertisements, marketing, sec

Demonstrates the method of advising the Ballarat branch of equipment and its use on the then new bogie trams., Demonstrates the method of advising the Ballarat branch of equipment and its use on the then new bogie trams.Memorandum on Electricity Supply Department letterhead, quarto paper typed, from Engineer and Manager (Melbourne) to Manager Ballarat Branch, dated 23/11/1945, advising of the Contactor fitted to the recently commissioned bogie trams, with quotes out of the MMTB training instructions on how they operate and their purpose. Memo titled "Tramways - Maximum Traction Trams:" "Copy for "Depot Foreman" written in using red ink.trams, tramways, maximum traction, training, instructions, controllers

Yields information about the reallocation of trams between Ballarat and Bendigo and scrapping of trams., Yields information about the reallocation of trams between Ballarat and Bendigo and scrapping of trams.Memorandum on Electricity Supply Department letterhead, foolscap paper typed, from Engineer and Manager (Melbourne) to Manager Ballarat Branch, dated 12/8/1960, advising of the proposed rolling stock re allocation between Bendigo and Ballarat. Scrapping of Bendigo 15, 12, 13 and 16. Transfer one Maximum Traction bogie tram to Ballarat and two single truckers to Bendigo. Gives the revised establishment - Ballarat - 10 bogies, 15 single truckers and Bendigo - bogies 10, five single truckers, 4 Birneys. "Copy for "Depot Foreman" type in using red ink.trams, tramways, maximum traction, ballarat, bendigo, tramcars, birney

Yields information about the nature of correspondence between the SEC and the City re Council issues.Copy of a letter on Electricity Supply Department letterhead, quarto paper typed, from Engineer and Manager (Melbourne) to City of Ballarat, dated 23-9-1965, with a copy to the "Works Superintendent", about the condition of the drainage in Gregory St, storm water not getting away - stagnant. Signed F, K White as Manager,trams, tramways, city of ballarat, drainage, depot