A gray plastic folder with a plastic insert at the front. In this insert there is a yellow paper with Australian Air Publication 7434.005-3 No. 8 top right hand corner. Above the Royal Australian Air Force Insignia reads Royal Australian Air Force. the rest of the information is under the insignia in black ink. Down the spine of the manual there is also a plastic insert with yellow paper that has the information in black ink. the manual is held together with metal supports.royal australian airforce - manuals, fuel pumps, bottom tank mounting

Refer to the service of "BASIL DARBY" SX9423, 2/14 Bn.1. A round bronze colour badge, at top border - words "The Reunion", at bottom border - words - "60th Anniversary 2002". In the centre of the badge are two human head profiles, two spitfires, a ship and possibly a tank with big numerals '60' at bottom. 2. Oval brass coloured badge. On top border is the phrase '70th Anniversary' . At bottom border is the phrase - "Bombing of Darwin". In the centre are a flight of aircraft, tall and short humans and the phrase "1942 Front Line Australia". 3. This is a multi shaped badge. It has a stylised Rising Sun, superimposed on that is a dark red shape of Australia. Under that is a black enamel banner with the phrase "Darwin Defenders 1942-1945". 4. This is a shield shaped badge with a long mounting pin behind it. The shield is a green enamel. In the centre is an 8 pointed gold star. Set on a red background. In that centre is phrase "1992 50th Anniversary" in gold colour. Around the outside of the star is the phrase " The Battle of Australia 50th Anniversary 1992".1. On rear is stamped 1484.badges, bombing of darwin, anniversaries

The donor recovered this navigation lamp before the 1980s from an old storage area in a South Melbourne factory where he worked. He asked about the lamp, but nobody there knew anything about its origin, and he was told that he could have it. This is a complete ship navigation lamp with its original oil burner. The internal red colour and shape indicate that the lamp was used for the port side of a vessel. The burner assembly is fixed to a removable tray, and the burner disconnects from the tank to allow fuel to be added. Light showing from the lamp is magnified by the polished brass reflector behind it, and the painted internal surfaces give the light its red colour. The lid on the chimney unclips for inspection purposes. The wedge shape of the lamp is intentional. It allows the light to be visible horizontally from up to a 112.5-degree angle, and to be invisible past that angle. The light's colour and position are part of the code of signals that inform viewers of the vessel’s position, direction of travel and status. The red lights indicate the port side of a vessel, green lights indicate the starboard side, and white lights are used on the masthead. From 1972, lights and signals on marine vessels are required to be fitted according to the International Regulations for Preventing Collisions at Sea. SEAHORSE lamp, made in Britain: The firm Bocock & Wilkinson was established in Birmingham in 1890 as an electroplate manufacturer. In 1900, Kelly’s Directory lists the firm as a ship lamp manufacturer. In 1910, the firm was listed Trading As “Seahorse” at 17 & 18 Mott Street, Birmingham. The firm later became Bocock & Son, and in 1932 was listed as George Bocock & Co. Ltd, and in 1973, it was still at that address. Ship’s navigation lamp: an original, galvanised metal, Port bow-side lamp. The wedge-shaped case has an arc front and two flat side panels that meet at the back, with a metal chimney and a swinging ‘C’ shaped handle on top. The curved, clear glass Fresnel has moulded ribs, top and bottom. The chimney has a hinged cap with a clip closure. One flat panel has a firmly attached, hollow rectangular channel for mounting onto a post or bracket. The other flat panel has a ‘D’ shaped, swinging handle, and slides upwards to access the burner assembly with its original brass burner. Concentric rings of ventilation holes are in the base. A removable tray, with ventilation holes on two edges, holds the round fuel tank and burner and the short post with the curved brass reflector. All internal metal surfaces, apart from the brass burner and reflector, were painted red sometime after the lamp’s manufacture. Inscriptions are embossed on the three brass plaques on the front; one has a rope design border and a seahorse emblem. Branded Seahorse, made in Great Britain, Ca. 1930s. Plaque on top, crescent shape: “PORT” Plaque in centre, square logo: “[rope design border] [Seahorse logo] “SEAHORSE / G B / TRADE / MARK / P55933” Plaque on base, rectangular: “PATENT NO. 546575 / AND OTHERS PENDING” flagstaff hill maritime museum and village, great ocean road, shipwreck coast, ship lamp, navigation lamp, masthead light, masthead lamp, port lamp, port light, bow side lamp, lighting device, navigation, marine light, marine lamp, marine equipment, marine technology, marine safety, running light, position light, code of lights, international regulations for preventing collisions at sea, antique, galvanised, seahorse, great britain, gb, patent 546575, seahorse logo, trade mark p55933, oil burner, bocock & wilkinson, bocock & sons, george bocock & co. ltd

The Tilley lamp derives from John Tilley’s invention of the hydro-pneumatic blowpipe in 1813 in England. W. H. Tilley were manufacturing pressure lamps at their works in Stoke Newington in 1818, and Shoreditch, in the 1830s. The company moved to Brent Street in Hendon in 1915 during World War I, and started to work with paraffin (kerosene) as a fuel for the lamps. During World War I Tilley lamps were used by the British armed forces, and became so popular that Tilley became used as a generic name for a kerosene lamp in many parts of the world, in much the same way as Hoover is used for vacuum cleaners. During the 1920s the company had diversified into domestic lamps, and had expanded rapidly after orders from railway companies. After World War II fears about the poisonous effect of paraffin fumes, and widely available electricity, reduced demand for domestic use. The company moved from Hendon to Ireland in the early 1960s, finally settling in Belfast. The company moved back to England in 2000.A significant item demonstrating the early use of kerosene under pressure as a lighting medium. These types of lamps were made by a company whose products became synonymous with oil lamps generally. Lamps that were used commercially, domestically and by the armed forces of many countries during the first and second world wars.Tilley Searchlight Projector, or search lamp, made in Hendon, England 1935. Metal kerosene pressure search lamp, glass front, fixed mirror at back, wooden carry handles. Mounted on fuel tank with pressure pump. Lamp has 8 airflow holes in the bottom and a covered outlet on the top. Glass is in 3 pieces, fitting together to make flat circle there is a maker’s plate on the pressure tank. “TILLEY / SEARCHLIGHT PROJECTOR / MADE AT / HENDON, ENGLAND”, “256” handwritten in red on one wooden handle, “9” or “6” hand painted in white on top on lightflagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, tilley kerosene pressure searchlight, lighting, john tilley, pressure lamps

Maurice Betts (born Bendigo) 3795164 served two years National Service which included service in South Vietnam from, 10.12. 1969 - 22.12.1969 with B Sqd 1st Armd Regt, 23.12.1969 - 19.11.1970 with A Sqd 1st Armd Regt with the rank of Trooper.Black & white photo of a group of soldiers (15), 1 Armoured Regiment in uniform with local Vietnamese children (18) in an informal group on & surrounding a Centurion Tank. 2 small buildings in the background. Dark brown timber frame with cream mount & photo protected by glass. White label card on glass bottom far R: Donated by MAURIE BETTS (Bendigo) 3795164 1 ARMD REGT VIETNAMvietnam, photography, centurian