This particular box of brass drawing pins would have been used before the introduction of cheaper polished chrome drawing pins manufactured in Asia. The box construction and label would suggest that supply of this boxes contents could have been in the early 1950's. Drawing pins or push pins were first invented in 1900 by Mr Edwin Moore. The need for a secure fastener to accommodate temporary signs and notes for domestic and commercial environments sprang up from the need to cope with an increasing faster method of presenting information on removable surfaces such as temporary notice boards. In the 1950's and later the increase in the pace of "living" brought about many time saving written communication notices. This temporary method of providing fast temporary notices is being surpassed by the computer age and mobile telephone "applications". The information spectrum of the computer age has made many "hands on" (drawing pin) applications go to the "dodo" level. This box of drawing pins is very significant to the Kiewa Valley and its region because it demonstrates that the pace in rural regions especially those that were once semi remote regions has moved at the same pace as the bigger towns and cities. Differences are still noticeable, such as the requirement of drawing pins for temporary signs and mail box commercially important "sales" notifications. The pressures that produce the "rat" syndrome, that is pressure by increased population levels infringing upon the individual's day-to-day existence is still not present in rural areas such as the Kiewa Valley. Drawing pins are still a requirement for leased accommodation (which are usually short term accommodation) for the personalisation of "home" wall decorations and shopper's "notice and information boards"This small box, similar to a "match box" (thumb activated slide, top open, cardboard container), holds brass drawing pins. These brass pins are also known as brass tacks, thumbtacks or push pins. The top of the brass tack has a "domed head" with the manufacturer's logo stamped on it. The number "2" on the bottom right of the label is the "weight" of the drawing pin. On the front and within a red border and red letters "BRASS" and below this in script form "Drawing Pins" and below this in smaller letters "Made In Germany" Below this and on the bottom left side "100" and also on the bottom but to the right "No. 2"notice and information boards, quick temporary fasteners., pins, tacts, brass tacts, domestic, decorations

A thumb tack, push pin or drawing pin is a short nail or pin used to fasten items to a wall or board for display and intended to be inserted by hand, generally without the assistance of tools. A variety of names are used to refer to different designs intended for various purpose. Edwin Moore invented the "push-pin" in 1900 and founded the Moore Push-Pin Company. Moore described the push-pin as a pin with a handle. Later, in 1904, in Lychen, German clockmaker Johann Kirsten invented flat-headed thumb tacks for use with drawings. A thumb tack has two basic components: the head, often made of plastic, metal or wood, and the body, usually made of steel or brass. The head is wide to distribute the force of pushing the tack in, allowing only the hands to be used. Many head designs exist: flat, domed, spherical, cylindrical and a variety of novelty heads.Cardboard box with sliding insert that contained 48 'IVORY' Brand celluloid head Thumb Tackson Box ; 48 / 48 / CELLULOID HEAD THUMB TACKS / 'G' / PIN WILL NOT / PASS THROUGH / BEST / QUALITY / IVORY / BRAND / MADE IN GERMANYdrawing pins, thumb tacks, brass tacks, moore edwin, kirsten johann

The tack hammer was used by Mrs K D Baird (Joy Coutts CPLC 1936) in the christening of the Minervan IV on the 11th April 1981, Boat Race morning. The christening is mentioned in Ring-a-roo October 1981 p.8The presentation of a christening hammer indicates the honour in which the owner was held by the school and also signifies the value placed by the school in both their rowing fleet and the people associated by name with the individual boats. Solid brass tack hammer with magnetic tips. Varnished wooden handle. Engraved head.Front of head: PRESENTED TO / MRS K D BAIRD / 11TH APRIL / 1981 Head verso: Minervan IV Maker's mark: GWMOUNT / PAT 282222joy-coutts, k-d-baird, ballarat-college, clarendon-presbyterian-ladies-college, minervan-iv, rowing, boats, christening, hammer,

wooden bark covered tent pegging marker with lead base held in place with small brass tacks and figure 1Figure 1

Any further information great fully accepted Wooden shaft bark covered with lead base held in place with small brass tacks figure 5 cut out of leatherFigure 5light horse, tent pegging

wooden bark covered tent pegging marker with lead base held on with small brass tacks and figure 4 cut out of bark, steel tack protruding from centre of 4figure 4

A thumb tack, push pin or drawing pin is a short nail or pin used to fasten items to a wall or board for display and intended to be inserted by hand, generally without the assistance of tools. A variety of names are used to refer to different designs intended for various purpose. Edwin Moore invented the "push-pin" in 1900 and founded the Moore Push-Pin Company. Moore described the push-pin as a pin with a handle. Later, in 1904, in Lychen, German clockmaker Johann Kirsten invented flat-headed thumb tacks for use with drawings. A thumb tack has two basic components: the head, often made of plastic, metal or wood, and the body, usually made of steel or brass. The head is wide to distribute the force of pushing the tack in, allowing only the hands to be used. Many head designs exist: flat, domed, spherical, cylindrical and a variety of novelty heads. Cardboard box with sliding insert that contained 3 Doz. GURA Brand Thumb Tacks On box ; MADE IN GERMANY / BEST / QUALITY / 3 doz. / THUMB-TACKS / Pin will / not pass / through the head / GURA / Trade Mark

A calico nightshirt with a blue stripe woven into the material. Round neckline with tacking stitches still present. Short sleeves. Back opening from neck to shoulder blades, fastened with two metal (brass) buttons.Handwritten on upper left breast in black ink "Calico Nightdress".costume, sunbury asylum, george evans collection

Large rectangular trunk lined with green and cream material. On each side is a mesh dome which opens with a clasp (to protect certain items?) including top and bottom. Brass clasp with locking mechanism, who smaller latches on either side. Leather handle, leather re-enforcements on each corner, attached with tacks. Exterior made of flaxite fiberBrass plaque on left hand side, 'Warranted Flaxite fiber rec trade mark featherweight' with feather in the centre. Sticker saying 'luggage Melbourne (sp.-st.) Cootamundra (NSW) Victorian Railways' on right hand side.personal effects, travel goods, trunk, travel, lock, storage, flaxite, featherweight

Belonged to Colonel Otter.1 Metal curb chain (part of bridle) 1 Pair of brass Spurs Miscellaneous horse riding accessories x 3horse tack, bridle bits, horse livery

Shield shaped varnished wooden plaque with large ATC hat badge affixed to the front. Below the badge there was formerly an enscribed brass plaque. this has since come off and there is now a glue stain and a small amount of blue tack in this location.air training corps

A decorative ribbed brass horse bit or mullen which is part of a horse's tack with two looped ring attachments at each end. It fits inside the horse's mouth and gives the rider control of the horse's head.horse tack, horse accessories, bridle bits, horse riding equipment, bits

A gentleman's chair, gent's chair or grandfather chair is a term usually applied in Australia to a deep upholstered Victorian easy chair, often button-backed and with upholstered arms. The chair generally stood on short cabriole legs and had a 'spoon' or a wide balloon back. The 'show wood', that is, the polished frame, was usually mahogany or walnut, although many examples in Australian red cedar have survived. There are Australian versions of the gentleman's chair, lady's chair and matching settees, usually made from cedar, and occasionally from blackwood. As cedar is a softer timber than walnut, mahogany and rosewood, from which the English versions were made, the carving is usually not as crisp as in the imported version. However, the Australian blackwood gentleman's chair is often difficult to distinguish from a good-quality English walnut example. The Edwardian form of the gentleman's chair is much squarer in outline, with short turned legs and the arms are often supported by spindles. There was sometimes a row of spindles, like a gallery, beneath the top rail. The chairs were frequently upholstered in leather.An item probably made in Australia during the latter half of the Victorian era and is significant as it was made in Australia at a time when furniture and many other household items were imported from either America or England.Armchair: gentleman's armchair of Cedar wood with brown leather upholstery, tacked and buttoned in a crocodile-skin-like effect. The wood is scalloped and carved with a Prince of Wales Feather on the back. The arms are scrolled and carved with an Acanthus leaf design, finished on tulip turned legs. All four legs have brass and porcelain castors. circa 1870, Australian-made. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, furniture, chair, armchair, gentleman's chair, lady's chair, leather upholstery, buttoned upholstery, living room furniture, lounge room furniture, formal furniture, domestic