This hat is part of a General Purpose Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was developed in 2014 and replaced camouflage as the uniform worn during general base duties and in non-warlike environments. Although a camouflage pattern, this design is not intended for use as camouflage. This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of current Airforce General Purpose Uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating GPU uniform design from the Army alongside the colours and motifs of the Australian Airforce. General Purpose Uniform (GPU) hat in Airforce colours of blue and grey in camouflage pattern. Broad brim hat with black plastic cord end fastener on a blue cotton cord. Plastic tag on interior of hat lining with printed inscriptions.Inscription on tag: “Hard Yakka/AUSTRALIA/AUGUST 2015/PO No: CC2XZ8/LAY No: 10609/SQNCOR FARLEY/(broad arrow)/[Mobile Phone Number]/NSN: 8415-66-161-4051/SIZE: M 56cm/NAME:” Inscription on reverse of tag: “PM KEYS No:/75% COTTON/25% POLYESTER/CARE INSTRUCTIONS/HAND WASH IN COLD/WATER WITH MILD/DETERGENT RISE/WELL DO NOT WRING/TUMBLE DRY OR/DRYCLEAN (X)/DRIP DRY IN SHADE”camouflage, airforce, uniform, general purpose uniform, australian defence force

DCPU is a five colour camouflage pattern developed by the Australian Defence Force and tested during Auscamthe late 1970s. DCPU has been replaced in the Australian Army by Australian Multicam Camouflage Uniform (AMCU) Long Trousers with two large thigh pockets, zip fly. Material is Disruptive Pattern Camouflage Uniform (DCPU) nicknamed Auscam or Jelly Bean Camo. auscam cammo, uniform, australian armed forces

This shirt is part of a General Purpose Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was developed in 2014 and replaced camouflage as the uniform worn during general base duties and in non-warlike environments. Although a camouflage pattern, this design is not intended for use as camouflage. This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of current Airforce General Purpose Uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating GPU uniform design from the Army alongside the colours and motifs of the Australian Airforce. General Purpose Uniform (GPU) shirt in Airforce colours of blue and grey in camouflage pattern. Long sleeve with 6 buttons up the front, two chest pockets with zippered verticle openings along the button seam; two button down pockets on both the left and right shoulder with velcro patches sewn to outside flap for attachment of patches. Above the chest pockets are two patches with embroidered inscriptions in white thread on navy backing. Shirt cuffs have adjustable velcro fasteners.Inscription on interior label is worn and illegible, halfway down the tag reads “PM KEYS NO.” Throughout (on shoulder seams, above left pocket and on back of collar) is the Australian Airforce badge/motif which features a circle with the words ‘Royal Australian Air Force', the Imperial Crown, and a Wedge-Tailed Eagle in flight though this detail is inferred not physically visible. Two embroidered patches above the chest pockets read “AIR FORCE” and “FARLEY.”camouflage, general purpose uniform, airforce, uniform, australian defence force

Current Uniform up to 2017Camouflage Pattern current to 2016 Leg pockets Manufactured Victoria 1991cammo trousers

DCPU is a five colour camouflage pattern developed by the Australian Defence Force and tested during Auscamthe late 1970s. DCPU has been replaced in the Australian Army by Australian Multicam Camouflage Uniform (AMCU) Long sleeved Shirt with two pockets, epaulets on both shoulders, tightening tabs on cuffs. Material is Disruptive Pattern Camouflage Uniform (DCPU) nicknamed Auscam or Jelly Bean Camo. auscam cammo, shirt, uniform, australian armed forces

DCPU is a five colour camouflage pattern developed by the Australian Defence Force and tested during Auscamthe late 1970s. DCPU has been replaced in the Australian Army by Australian Multicam Camouflage Uniform (AMCU) Long sleeved Shirt with two pockets, epaulets on both shoulders, tightening tabs on cuffs. Material is Disruptive Pattern Camouflage Uniform (DCPU) nicknamed Auscam or Jelly Bean Camo. shirt, australian armed forces, auscam cammo, uniform

These trousers are part of a General Purpose Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was developed in 2014 and replaced camouflage as the uniform worn during general base duties and in non-warlike environments. Although a camouflage pattern, this design is not intended for use as camouflage. This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of current Airforce General Purpose Uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating GPU uniform design from the Army alongside the colours and motifs of the Australian Airforce. General Purpose Uniform (GPU) trousers in Airforce colours of blue and grey in camouflage pattern. Long pants with elasticised drawstring fastener at ankle and velcro adjustment fasteners at the waist. Pants take a straight leg style and bears several pockets: two thigh level pockets with zippered horizontal opening, two open hip pockets on the front, one open pocket on the reverse right hand side with blue plastic button fastener. Five large belt loops encircle the waist and there is a zippered fly, secured at the top with a blue plastic button.Label on interior front right of trousers reads: “A193/ADA/MADE IN AUSTRALIA/JUL 2015/ PO: CC2X91/NSN: 8415 66 161 4017/SIZE: 95 R/(broad arrow)/NAME:............/PM KEYS NO:............./75% COTTON 25% POLYESTER/WARM MACHINE WASH 40*C/RINSE WELL, WARM IRON/DO NOT IRON OVER HOOK AND PILE/DO NOT BLEACH/DO NOT STARCH/MAY BE TUMBLE DRY 40*C/DRYCLEANABLE (P)”camouflage, general purpose uniform, airforce, uniform, australian defence force

DCPU is a five colour camouflage pattern developed by the Australian Defence Force and tested during Auscamthe late 1970s. DCPU has been replaced in the Australian Army by Australian Multicam Camouflage Uniform (AMCU) Soft round 'giggle' hat with 6 cm stitched brim. Fabric loops for inserting Camouflage materials. Fabric is Disruptive Pattern Camouflage Uniform (DCPU) nicknamed Auscam or Jelly Bean Camo. JOHN STAR P/L NSW 02 9669 1066 SIZE: 60CM 100% COTTONauscam cammo, uniform, australian armed forces

Helmet Liner with camouflage pattern and internal suspension webbingliner, camouflage, helmet

Sweat rag used during the Vietnam and later era’s, cut from a long bolt of cloth. Camouflage pattern green and black mesh woven cotton hemmed at each end.sweat rag, camouflage

As used by Australian Soldiers in the Vietnam War 1962 - 1972 and after.Section of cotton open weave sweat rag, olive green with black camouflage pattern.clothing, field, vietnam war, accessory

Part of the Cooper Collection. 1. & 2. Embroidered Australian Coat of Arms in black thread on a square camouflage pattern background.cooper collection, rank insignia, warrant officer class 1.

Standard Backpack with camouflage pattern with one zip at top of backpack, two black pastic clips on back sideInternal front side 8465-66-139-4068, SOS, JAN 95backpack, standard issue, january, camouflage

Satchel with camouflage pattern, three plastic lock-in clips on front, three black clips on back and one toggle in front. Internal inscription reads, 8465-66-139-4069, SOS, JAN 95sachtel, camouflage, january, 1995

Part of the Reverend Chaplain Major Thomas Bruce Williams, No 556101, Collection.Four slide shoulder boards in camouflage pattern. Each has three pips embroidered in black signifying the rank of captain.army chaplain, rank insignia, major thomas bruce williams

Baseball cap design with printed camouflage pattern velcro straps at rear and velvro patch at front for attaching unit patches.WWW.SORDAUSTRALIA.COM

Camouflage pattern cotton fabric giggle hat issued to Lt Gen Brian “Ash” POWER. Originally designed for jungle warfare to break up the head's outline and offer protection from tropical rain and sun. The Giggle Hat is an iconic Australian military-style bush hat,, characterized by its wide, floppy brim and camouflage pattern. Developed during WWII, these durable, breathable cotton hats feature foliage loops for camouflage and are now popular for hiking, fishing, and gardening due to their excellent sun protection. Camouflage fabric hat with short wide brim with loops stitched around band with draw string attached.Size L 60lt gen ash power, giggle hat

Camouflage pattern cotton fabric six panel peaked cap issued to Lt Gen Brian “Ash” POWER. Camouflage fabric cap with vent holes, detachable badge above peaked brim.lt gen ash power, army peaked cap

The Air Force General Purpose Uniform was adopted by the RAAF in July 2014. It is worn as dress of the day for non-combat operations. These were worn by Bob Schouten.Trousers with a blue/grey/white/green camouflage pattern. Pockets on the sides, a metal zip at the front and plastic button at the top.Drawstring hems at the ankles.air force, raaf, fatigues, uniform

Army Helmet from WW2 worn by S. Dunlop 2/4 Bn Coy.Helmet - cotton khaki camouflage pattern covering steel helmet. Inside cotton straps, chin strap cotton webbing with metal clasp.Nilarmy, helmet, ww2

Camouflage pattern (black, green, brown, khaki) cotton 'giggle' hat. Four brass ventilation fittings in crown. Manufacturer's label sewn inside. Label side 1 - John Star Pty. Ltd. NSW 02-669-1066 Name ............ (note - no name shown) No. ................ (note - no number shown) 100 % COTTON Made in Hong Kong" Label side 2 - care instructions headgear, combat

Camouflage patterned fabric outer with felt lining, two flaps with a metal press stud on each. Steel belt attachment hooks on back strap.canteen, holder, camouflage

Items souvenired by "Henry Smyth", No 3792681, Refer Cat No. 9561 for his service details.1. Fibre glass substance, US Pattern in liner for steel helmet, inside has adjustable strapping. 2, Camouflage pattern cover for 1.1. Stamped on liner, "Cat. No. 8145-50-753-5792". 2. Stamped on cover helmet Camouflage, “Contract No. 8196-8415-261-6833 DSA, DDSC, DIR, OF, MFG."helmet, headwear

Part of the Reverend Chaplain Major Thomas Bruce Williams, No 556101, Collection.Two pairs of slide shoulder boards in camouflage pattern. Each is embroidered with a black queen's crown indicating the rank of major. Each pair is in its original packaging.army chaplain, major thomas b. williams

8/13 Victorian Mounted Rifles was equipped with White Scout Cars in 1960s.The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Black and white photograph of two White Scout cars painted in a distinctive camouflage pattern suggested by the Troop Sergeant who had seved with Panzer Corps in Russia during WW2." 2TP Puckapunyal White Scout Car."