Showing 7 items matching "camouflage wear"
-
Bendigo Military MuseumUniform - SHIRT, ARMY, Australian Defence Industries
... ...Camouflage wear...Uniform Army Camouflage wear Green cotton label information - black ink print: "ADI/VICTORIA/^/ 8415-66.130.0032/ SIZE 92R/ SERVICE NO./ NAME/ 50% Polyester/ 50% Cotton/MACHINE WASHABLE/ DRIP DRY ONLY/ DO NOT IRON/ DO NOT STARCH/ DO NOT BLEACH" Shirt - camouflage jungle green and brown, polyester/cotton fabric, with long sleeves, shoulder epaulettes, two front pockets with button down flap and one sleeve pocket with button down flap, plastic buttons. ...Shirt - camouflage jungle green and brown, polyester/cotton fabric, with long sleeves, shoulder epaulettes, two front pockets with button down flap and one sleeve pocket with button down flap, plastic buttons. Two rank insignia on sleeves - Corporal. Cotton manufacturers label, green, with black print information. Green cotton label information - black ink print: "ADI/VICTORIA/^/ 8415-66.130.0032/ SIZE 92R/ SERVICE NO./ NAME/ 50% Polyester/ 50% Cotton/MACHINE WASHABLE/ DRIP DRY ONLY/ DO NOT IRON/ DO NOT STARCH/ DO NOT BLEACH" uniform, army, camouflage wear -
Frankston RSL Sub BranchHelmet, Australian M1, circa 1960's
... camouflage material. The M1 is two "one-size-fits-all" helmets: an outer shell made of metal and a hard hat-type liner that is nestled inside the shell and contains the suspension system that would be adjusted to fit the wearer's head. ...camouflage material. The M1 is two "one-size-fits-all" helmets: an outer shell made of metal and a hard hat-type liner that is nestled inside the shell and contains the suspension system that would be adjusted to fit the wearer's head. ...Standard issue United States M1 pattern steel helmet, olive drab in colou, stretch cotton cargo type net, with fibreglass liner. On the inside of a strap in the liner '8415-153-6671' is printed in black ink. This number would appear to be the "Federal Stock Number (FSN)" which was used 1949 to 1975 when ti was replaced by "National Stock Number (NSN)' by additional of 00 after the first 4 numbers. this would indicate that it was made in USA. The chin strap and liner are both complete and fully operable. These helmets were first issued in 1941 to the United States Armed Forces. They were adopted after the Korean War by the Australian Defence Force. In the 1990s they were replaced by the Kevlar based Personnel Armour System-Ground Troop (PASGT) type helmet. However, as evidenced by this helmet, some M1 Steel helmets were not replaced in-service by the PASGT helmet and survived into the early 21st Century. Used by Royal Australian Army in Vietnam in areas where mines were significnat, such as Long Hai's mountains (together with US flak jackets), and also by Royal Australain Navy.An example of an Australian Army issue M1 steel battle helmet complete with fibreglass liner. This helmet type was issued to Australian defence personnel during the Vietnam conflict. The inner line has a transfer on the front " Australian Military Forces" with rising sun badge. The steel outer has an olive green elastic cover (similiar to cargo net) to hold camouflage material. The M1 is two "one-size-fits-all" helmets: an outer shell made of metal and a hard hat-type liner that is nestled inside the shell and contains the suspension system that would be adjusted to fit the wearer's head. Helmet covers and netting would be applied by covering the steel shell with the extra material tucked inside the shell and secured by inserting the liner. The helmet is 7 inches in height, width is 9.5 inches and length is 11 inches. The weight of a World War II era M1 is approximately 2.85 pounds including the liner and chinstrap. (From Wikipepedia) the inner line has a transfer on the front " Australian Military Forces" with rising sun badge.steel helmet -
Warrnambool RSL Sub BranchShirt
... As a set, the uniform has aesthetic significance in it’s design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force. camouflage uniform australian defence force disruptive pattern airforce Interior label has been removed. Two embroidered patches above the chest pockets read “AIR FORCE” (left of wearer) and “FARLEY” (right of wearer). ...This shirt is part of a Disruptive Pattern Combat Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was used in base and field activities and was replaced in 2014 by the General Purpose Uniform as the uniform worn during general base duties and in non-warlike environments.This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of previously standard issue Airforce uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Field shirt in disruptive pattern colours of green, khaki and browns. Long sleeve with 6 buttons up the front, two chest pockets with zippered verticle openings along the button seam; two button down pockets on both the left and right shoulder with velcro patches sewn to outside flap for attachment of patches. Above the chest pockets are two patches with embroidered inscriptions in black thread on disruptive pattern backing. Shirt cuffs have adjustable velcro fasteners.Interior label has been removed. Two embroidered patches above the chest pockets read “AIR FORCE” (left of wearer) and “FARLEY” (right of wearer). Oval patch on left shoulder shows a kangaroo silhouette encircled by a black embroidered circle.camouflage, uniform, australian defence force, disruptive pattern, airforce -
National Vietnam Veterans Museum (NVVM)Textile - Badge - cloth
... This is the black version designed for wear on the Army OCP (Operational Camouflage Pattern) or MultiCam uniform. ...This is the black version designed for wear on the Army OCP (Operational Camouflage Pattern) or MultiCam uniform. ...This item is a US Army 1st Infantry Division patch, often known as the "Big Red 1". This is the black version designed for wear on the Army OCP (Operational Camouflage Pattern) or MultiCam uniform. Soldiers who have served in a combat zone with the unit wear this patch on their right shoulder. The U.S. Army 1st Infantry Division served in Vietnam from 1965 to 1970, primarily conducting search-and-destroy missions. Based in Di An and Lai Khe, they fought in the Iron Triangle, secured Tan Son Nhut Air Base during the 1968 Tet Offensive, and engaged in major operations. This patch was collected by WO2 Robert Palmer Matthews ( Service # 34974) of the Royal Australian Army Ordnance Corps, who served with 161 Reconnaissance (Recce) Flight.Shield shaped khaki cloth badge with the number 1 embroidered in black. Khaki overstitch on edges.robert palmer matthews, cloth badge, badge, patch, matthews, united states army, us army, 1st infantry division, big red 1 -
National Vietnam Veterans Museum (NVVM)Equipment - Equipment, Army
... Army issue body harness to wear and two drink bottles in carriers attaced three x ammunition pouches in green camouflage material...Pack Army issue body harness to wear and two drink bottles in carriers attaced three x ammunition pouches in green camouflage material Equipment Equipment, Army ...Army issue body harness to wear and two drink bottles in carriers attaced three x ammunition pouches in green camouflage materialpack -
Melbourne LegacyLeisure object - Toy Bear, Legacy Bear $20 - Navy Camo Bear, 2022
... Navy Camo wears The Royal Australian Navy's new Maritime Multi-Cam Pattern Uniform commenced rollout in October 2021. It brings uniformity across Defence as it features the familiar design of the Australian camouflage uniform but retains the maritime grey tones a key differences unique to Navy requirements. ...Navy Camo wears The Royal Australian Navy's new Maritime Multi-Cam Pattern Uniform commenced rollout in October 2021. It brings uniformity across Defence as it features the familiar design of the Australian camouflage uniform but retains the maritime grey tones a key differences unique to Navy requirements. ...In the 2000s Legacy released a range of Legacy Bears to expand the merchandise available for sale during Legacy Week and at other fundraising opportunities during the year. This bear was new in 2022 and is in the navy camo uniform. Navy Camo wears The Royal Australian Navy's new Maritime Multi-Cam Pattern Uniform commenced rollout in October 2021. It brings uniformity across Defence as it features the familiar design of the Australian camouflage uniform but retains the maritime grey tones a key differences unique to Navy requirements. Sometimes special editions of the bears were produced. In 2021 the price was increased to $20 per bear.An example of the type of products sold along with Legacy Badges for fundraising in the 2010-2020s.Legacy bear dressed in a camo naval uniform with a printed cardboard tag.Printed tag gives the price as $20.legacy appeal, fundraising, legacy bear -
Bendigo Military MuseumUniform - TROUSERS, DPCU, ARMY, Australian Defence Industries. ADI, 2016/ 2017
... Wear DPCU Army Manufacturers details - black ink print. 1. 2. Illegible print. 3.6. "ADA/ MADE IN AUSTRALIA/ AUG 2016 or FEB 2017/ PO: CC3001/NSN: 8414.66.161.6291 or 8415.66.161.6411/ SIZE 34r (84-89 CM)/ ^ /NAME/ PM KEYS NO/ MAIN/ 75% COTTON/25% POLYESTER/ STRETCH" followed by Laundry instructions. 1. TO 6. Trousers - cotton polyester woven fabric with DPCU (Disruptive Pattern Camouflage ...Collection re Paul Denis Ahearn, No. 331 325 refer Cat No. 11108 for his service details.1. TO 6. Trousers - cotton polyester woven fabric with DPCU (Disruptive Pattern Camouflage Uniform). Colours - colours include light, dark and olive green, khaki and dark and light brown. Trousers have a waistband button down belt keepers, two inset side pockets, two largepatch pockets with two button or nylon and metal zippers or Velcro on concealed cover flap. 1.2. Back patch pocket, metal and nylon zipper fly, Bottom of trouser leg - elastic drawstring with plastic toggle clip. Green coloured plastic buttons. Manufacturers information - white coloured fabric label on green coloured pocket lining - right side,Manufacturers details - black ink print. 1. 2. Illegible print. 3.6. "ADA/ MADE IN AUSTRALIA/ AUG 2016 or FEB 2017/ PO: CC3001/NSN: 8414.66.161.6291 or 8415.66.161.6411/ SIZE 34r (84-89 CM)/ ^ /NAME/ PM KEYS NO/ MAIN/ 75% COTTON/25% POLYESTER/ STRETCH" followed by Laundry instructions.paul denis ahearn, ahearn collection, uniform, trousers, work wear, dpcu, army
