There were at least three 1880s vessels named Lady Loch, all built in Victoria; a river launch (ca 1884-ca 1916, originally named Lady of the Lake), a steamer ferry (1884-1920s) and a government lighthouse tender steamer HMV Lady Loch (1886-1962.) The carved wooden panel was removed from the HMV SS Lady Loch before the vessel was scuttled in 1962. About HMV SS Lady Loch: - The HMV SS Lady Loch was an iron steamship built in Footscray, Melbourne, by Campbell, Sloss and McCain in 1886 for the colonial Victorian government’s Department of Trade and Customs. It was armed with a 6-inch gun and two 1-inch Nordenfelt guns. The Sydney Morning Herald of 27th January 1888 describes the vessel in detail. It even comments on the interior of the Saloon “The wood work … is on a very elaborate scale and is exceedingly neat …”. The HMV Lady Loch performed Customs duties, and serviced the lighthouses along the coast. The scale could have measured goods for the Customs Tax, or for measuring out supplies for the lighthouse keepers. The vessel was named after Lady Elizabeth Loch, wife of Sir Henry Loch, Governor of Victoria from 1884 to 1889. In 1932 Lady Loch was converted to a hulk and used in Brisbane, and finally scuttled in 1962 at Moreton Bay, Queensland. The carved wood panel has importance due to its connection to the 1886 HMV Lady Loch, a vessel of great significance to Melbourne’s shipbuilding industry. It was the largest auxiliary vessel in the Victorian Colonial Government’s fleet and the first prominent vessel launched by Melbourne’s shipbuilding industry. It is significant to the history of the Victorian era and the colonial navy's steamship HMV SS Lady Loch. The vessel carried out Custom's work, and the scales were available to weigh goods that could attract taxes and goods for distribution to lighthouse keepers. The HMV Lady Loch was also important part of Victoria's maritime history, its communication with and support of the lighthouse keepers along the coast of Victoria.Heavy carved wooden panel, square, representing a framed plaque. The bottom and right edges are scalloped on the outer and inner edges. A carved oval within the frame represents a wide belt with buckle and tongue, and indents for the belt holes on its left and a carved inscription runs from top centre to bottom centre on the right side of the belt. Within the belt is the maritime symbol of an upright anchor in front of a rope. It was once part of the furnishing of the steamer HMVS Lady Loch and was removed before the ship was scuttled.Carved within the belt: "STEAM SHIP LADY LOCH"warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, scale, salter, spring balance, silvester's patent, lady loch, steamship, hmv, colonial navy, victoria, lady elizabeth loch, custom's vessel, lighthouse tender, 1886, government vessel, victorian government, wood panel, timber panel, carved panel, carved log, lady loch logo, belt enclosing and anchor, anchor within belt, lady loch steam ship, wooden panel, ship's furinshing, ship's panel, ship's logo, great ocean road, government steamer, victorian colonial government, colonial vessel, public works, bass straight, hmv lady loch, hmvs lady loch, hmv ss lady loch, melbourne, melbourne shipbuilder, ship furnishings, wooden furnishings, decorative panel, carved emblem, carved logo, carved symbol, campbell stoss and mccain, government tender, victorian customs

Five-person council meeting desk. Brown polished wood featuring the shire carved logo affixed to front. Five red vinyl/leather inserts on top for writing.

Polished timber meeting desk with SGSC logo on front. The desk is the central part of a set used in Council meetings in the main Chambers at Leongatha. The brown wood desk features the Council's carved logo affixed to front. The logo is created from four varieties of timber.

Wooden curved top Probus Club of Ringwood Inc. wall plaque with carved Probus logo and names of club presidents and years of office from 2004 to 2019.Probus Club of Ringwood Inc. Presidents - 2004-2005 Alan Marshall, 2005-2006 Ken Johnston, 2006-2007 David Gibb, 207-2008 Hedley Deacon, 2008-2008 (sic.) Ted Brewster, 2009-2010 John Ulrik, 2010-2011 Ron Hallett, 2011-2012 Alan Marshall, 2012-2013 Alan Marshall, 2014-2015 Ron Hallett, 2015-2016 Derek Williams, 2016-2017 Norm Wensor, 2017-2018 Norm Wensor, 2018-2019 Norm Wensor.

Wooden striking mallet and circular wooden block with carved lettering and Probus logo.Probus Club of Ringwood Inc. - Probus logo - Made and donated by Clyde Aitken April 2002.

SGSC honour board. Painted in gold and black ink the board has five columns; three of which contain details of the past and present councillors, presidents and CEOs from 1994 to present day. Carved wood council logo upper edge. Description of the formation of the SGSC printed across lower edge.

Postcards sent by R.H. Baron depicting scenes of Codford when the AIF was encamped during WW1. Part of the Robert H. Baron, No. 3596 and Cooper Collections. See Catalogue No. 1981P for details of Baron's service.1. Plain postcard with no photograph. Front has printed Mother's Day message. Y.M.C.A. logo and Rising Sun badge printed at top. Space for written address. Postmark top R.H. Corner. 2. Collation of black and white photographs of scenes from a village. 3. Coloured photograph of a group of soldiers in winter uniform and standing on a snow covered road. Buildings in background. 4. Black and white photograph of a church with square tower, Houses next door. Graveyard next to church. 5. Black and white photograph of a Rising Sun badge carved into a hill side.1. Handwritten in black ink on back: 'Letter to R.H. Baron's mother, dated 9 May 1918'. 2. Greetings from Codford. Handwritten in black ink on back: Letter to R.H. Baron's mother dated 13 July 1918. 3. Winter at Codford. Handwritten in black ink on back: 'Letter from R.H. Baron to Doris dated 1 September 1918'. 4. Codford, St Mary Church. Handwritten in black ink on back: This is a church in the centre of our camp. Bob'. 5. The Rising Sun, Codford. Handwritten in black ink on back: 'Dear Elsie, This Rising Sun was made by an Australian Soldier some time back. Bob'. robert h. baron, cooper collection, postcards, codford uk, aif camp - ww1

Cards relate to R.H. Baron's time at Hurdcott AIF Camp during 1918. Part of the "Robert H. Baron", No. 3596, and Cooper Collection. See Catalogue No. 1981P for details of Baron's service.1. Black and white newspaper clipping pasted onto a piece of cream card. Clipping features a black and white photograph of a map of Australia carved into the side of a hill. Caption in black type below photograph. 2. Black and white postcard style photograph of a map of Australia carved into the side of a hill. 3. Plain cream coloured postcard with YMCA logo and AIF insignia at the top. Handwritten address on front and handwritten letter on back.1. Handwritten in black ink on back: 'This map has been cut in the hill and is only about 10 minutes walk from here, Bob' 3. Handwritten in black ink on front: 'Miss M. Baron, 208 Forest St. Bendigo, Victoria, Australia'. Stamped in black on top R.H.C. of front: 'Postmark - AIF Camp P.O. No.4, 18,' Handwritten in black ink on back: 'Letter to R.H. Baron's sister Myrtle from Hurdcott Camp dated 3.11.18.'robert h. baron, cooper collection, postcards, hurdcott aif camp

Sewing machine, portable, hand operated, with Premier logo. Has folding crank handle, body painted black with floral design, wooden base and separate wooden cover with lock. Base has compartment with accessories, covered by curved ended, sliding wooden panel. Decorative linework on side, carvings on each corner. Wooden handle on cover is carved in rings, folds down. Below handle is decorative inlaid pattern. Serial number on plate at back of machine. Accessories include 13 attachments, key (broken), screwdriver, sewing machine needle, razor blades (2) and buttons. Attached to inside of case is a square of paper with a number on it. Instruction book for Singer Sewing Machines is included. Also with machine are white tailor's chalk and a cut out, fabric pocket with tissue paper pattern pinned to it.Serial number "579200" is stamped into plate at back of machine. Brand on transfer on front of machine is "Premier". Paper inside case has hand written number "334A". Instruction book "Instructions for using Singer Sewing Machines No. 66 - Oscillating hook for family use" flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sewing machine, permier sewing machine, hand operated sewing machine, dressmaker, fasion, singer no. 66 manual, textile, flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sewing machine, permier sewing machine, hand operated sewing machine, dressmaker, fasion, singer no. 66 manual, textile

A wooden racquet with a laminated, convex throat and grooved handle. Decal logo on throat on obverse comprises of a winged ball, with inscription: VICTOR/.../SPORTING GOODS CO. Decal inscription across throat on reverse: COMET. Hand carved monogram across right side of stem: PRW. Materials: Wood, Gut, Metal, Glue, Lacquer, String, Leather, Inktennis

A wooden racquet with a solid, convex throat and grooved handle. Decal logo on throat on obverse comprises of a winged ball, with inscription: VICTOR/.../SPORTING GOODS CO. Decal inscription across throat on reverse: CLUB. Illegible, hand carved monogram across right side of handle. Materials: Wood, Gut, Metal, Glue, Lacquer, String, Leather, Inktennis

A wooden racquet with a laminated, convex throat, and bulbous handle. Decal logo on throat on obverse comprises of a winged ball, with inscription: VICTOR/.../SPORTING GOODS CO. Decal inscription across throat on reverse: VARSITY. Hand carved names on obverse: BECKY; and reverse: NIG. Materials: Wood, Gut, Metal, Glue, Lacquer, String, Ink, Cloth tapetennis

A Wright & Ditson 'Challenge' model tennis racquet with transitional flat-top head and laminated convex throat. String whipping around shoulders. Model name printed across throat on obverse. Manufacturer's trademark/logo features across throat on reverse. Fine-grooved octagonal handle with leather end wrap. Manufacturer name imprinted on right side of shaft. Inscribed on left side of shaft: PATENTED. Letters 'EWE' carved onto throat on reverse. Materials: Wood, Metal, Lacquer, Glue, Ink, Leather, Gut, Stringtennis

A Spalding transitional flat-top tennis racquet, featuring: solid convex throat; and, cross-hatched handle. Decal of A.G. Spalding & Bros. Makers logo encircling ball trademark features on throat on obverse. The initials 'G.M.D.' have been carved into shaft on reverse. Materials: Wood, Lacquer, Glue, Metal, Ink, Leather, Gut, Stringtennis

A Spalding 'Geneva' tennis racquet, featuring: laminated convex throat; and, fine-grooved, octagonal handle. 'A.G. Spalding & Bros. Made in U.S.A.' logo encircling ball trademark features on throat on reverse, and impressed onto butt cover. Decal of model name feature across throat on obverse. Initials 'IM' carved across throat on obverse. Materials: Wood, Lacquer, Glue, Metal, Ink, Gut, Leathertennis

A Wright & Ditson wood tennis racquet with solid convex throat. Rounded flat top head. Manufacturer name and country of origin printed across throat on obverse. Manufacturer's trademark/logo features across throat on reverse. Cross-hatched handle and leather end wrap. Owner's initials: G.P. carved into throat on reverse. Series of cuts carved into handle post-manufacture. Indecipherable model name printed on crown on obverse. Materials: Wood, Metal, Lacquer, Glue, Ink, Leathertennis

A Wilson Famous Player Series, Jack Kramer Staff Model tennis racquet. Base of head features Wilson logo. Shaft features decal of head and neck photo image of Kramer. Throat features decal design of a gold crown within a corona. Base of shaft features 'W' trademark. Leather handle grip features quatrefoil perforations. Faint autograph by Kramer along left side of shaft. Initials carved into right side: K.W. Materials: Wood, Nylon, Leather, Adhesive tape, Ink, Glue, Lacquer, Metal, String, Ribbon, Paint, Plastictennis

An F.H. Ayres transitional flat-top tennis racquet, with solid, convex throat, fine-grooved handle; and leather end wrap and butt cover. Hand carved monograms: on obverse, CAM; and, on reverse GHC. Manufacturer's logo impressed along sides of shaft, on obverse. Racquet is housed within a Badminton set (TA 2009.287). Materials: Wood, Metal, Lacquer, Glue, Gut, Leathertennis

Presented by the Victorian Tramway Football Association to Mr Norman Charles Boucher, Victorian Railways, Tramway Motorman for his long service to the Association. Dated 18 March 1947. Hand made with ink and water colours, with VFTA logo. Signed by C A Peterson as President, L Montgomery as Hon. Treasurer and R Hodder as Secretary. See item 7056i3.pdf for his story prepared by Noelle Jones. See item 7057 for a football team photograph which included Mr Boucher.Demonstrates a hand made illustrated Life Membership certificate.Wooden framed illustrated certificate glazed secured with nails on rear. Hand made with ink and colour wash. Has two screws in the top corners and a section of string for hanging. The wood frame is machined carved.sports, vfta, football, certificates, vr trams, motormen, n c boucher