Chain Khiang Wang's 2002 thesis used autobiographical figurative painting as a vehicle for conveying an understanding of Buddhism.Chain Khiang WANG In 2002 Chain Khiang Wang completed a Master of Arts at the University of Ballarat (later Federation University). This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.An artwork depicting a dark scene in a bar where a white shirted barman oversees the scene. art, artwork, chain khiang wang, alumni

Chain part of a horse bit imported and sold by Holden and FrostAs imported and sold by Holden and FrostLead curb chain, part of a horse bit equine, chain, military, civilian

Each mayor purchased their own link for the Mayoral Chain Digital copy of colour photographs showing the mayoral link for Mayor John H. Gervasoni, in the city of Kew Mayoral Chain.jack gervasoni, chain, gold, link, mayor, mayoral, mayoral chain, kew, city of kew, john hogan gervasoni

Before metric measurement was introduced land was measured in chains and links. The chain was a precision part of a surveyor's equipment. It required frequent calibration, yet needed to be sturdy enough to be dragged through rough terrain for years. A standard survey chain is 66 feet (or 20.117m) long and made up of 100 links. Each link is 7.92 inches (approximately 201mm) long, measured from the inside of the loop. The handles are for tensioning the chain in use, they are not part of the length of the chain. In pre-metric units, there were 80 chains to 1 mile (equals 1.609km) This surveyor’s chain has an 8-inch link pitch, with markers at 10 link intervals. This metal surveyor’s chain (or Gunter's Chain) has an 8-inch link pitch, with markers at 10 link intervals, and handles at either end. A Surveyor’s Chain was 66 feet long, and made up of 100 links connected by two rings. A link in measurement includes the two rings at each end. gunter's chain, survey chain, surveyor s chain, perch, rood, surveying

A Gunter’s Chain, an old land surveying instrument, is named after its inventor, Edmund Gunter (1581-1626), an English mathematician and astronomer. It was first produced in 1620. The tool has 100 links and is 66 feet or one chain long. The links are marked off in groups of ten by metal tags or rings. A quarter chain (25 links) is called a rod or pole and ten chains make a furlong and 80 chains a mile. The traditional cricket pitch is 22 yards or one chain long. This chain is said to have been used by Gilbert Nicol when the Warrnambool to Hamilton Road was constructed in the 19th century. Gilbert Nicol was an early settler in Warrnambool who, with John Craig, established the first hotel (and the first building) in Warrnambool in 1847. Nicol later owned the property ‘Rosehill’ in the Warrnambool area. As the chain was given to the Warrnambool and District Historical Society by the Town Clerk, Keith Arnel, it is likely that the chain was one of the items in the old Warrnambool MuseumThis Gunter’s Chain is of importance because it is an early land measuring device that was used for over 250 years and has great historical and mathematical significance. If it is correct that it was used by Gilbert Nicol when the Warrnambool to Hamilton Road was built then it has considerable local significance and dates back to the 19th century. This is a metal tool which consists of 100 metal pieces or links joined together by loops at each end with two metal loops in between each link. The links joined together form a chain. The two ends of the chain have small metal handles attached. At intervals along the chain there are additional rings or metal pieces attached. The metal is very rusted.gunter’s chain, land measurement tools, history of warrnambool

A courting chain was carved by a man and given to the girl he was courting. This was a common European practice in the past, with Welsh courting chains surviving from the 17th century, though the practice may have gone back even further than that. The chain indicated that man was a capable artisan and was occupying his hands in a healthy way, particularly when the lady was present. The many types of loops and chains carved all had symbolic meanings. The cage with the wooden balls inside was said to indicate the desire of the man for children and the number he would like. The symbolism of the arm and hand with the two digits touching is not known. This courting chain has no known local provenance but it is an interesting object as an example of the customs of the past. It will be useful for displays. This is a wooden carved courting chain. One end is in the shape of an arm and hand with the thumb and first finger touching at the tips. Then there are three chains linked to the arm with a peg inserted into another loop at the end. Next, joined to this, is another loop attached to a wooden cage which has two wooden balls inside. The chain is finished with a carved turret structure at the end. courting chains, history of warrnambool

This chainsaw was one of the earliest models sold in Australia. It was manufactured by the Lombard company which was established in 1894 when Nathaniel Lombard developed the first practical water wheel governor in Roxbury, Massachusetts, USA. In 1904, the company moved to Ashland, Massachusetts. During the first World War, Lombard Governor produced hydraulic lathes for the manufacture of artillery shells At the conclusion of the war, Lombard expanded into the areas of chain saws and plastic molding injection machines. This model, the L-30 was only produced for 2 years from 1962 - 1964, primarily due to safety concerns and the fact that it did not have any way to sharpen or tighten the chain. This chainsaw was sold by Mann of Wodonga and donated to the Wodonga and District Historical society by David Mann, owner and manager of Mann Wodonga.This item is significant as it was produced for a limited time. It was also sold by a prominent Wodonga business.A single operator chain saw from Lombard, Ashland, Massachusetts, USA. The chainsaw was relatively lightweight but had no safety features such as a chain brake. It was made primarily of sand cast magnesium. The main cylinder was constructed of aluminium with a cast iron sleeve. It had a manual oil pump, the crankshaft operated on ball bearings and it had a maximum rpm of 4,500. See the Model profile in the accompanying Media item for details.On side of fuel tank: "ONE HALF PINT/SAE-30 OIL/ FOR EACH/ GALLON GASOLINE/ MIX WELL IN SEPARATE CONTAINER/BEFORE FILLING" On opposite side: "STARTING INSTRUCTIONS 1: FILL FUEL TANK WITH PROPER FUEL MIXTURE ( AS NOTED ON TANK) 2. FILL OIL RESERVOIR WITH #30 MOTOR OIL 3. CLOSE CHOKE, MOVE LEVER BACK TOWARDS AIR FILTER 4. HOLD THROTTLE WIDE OPEN 5. PULL STARTER HANDLE SLOWLY UNTIL STARTER ENGAGES, THEN GIVE IT A SHARP YANK 6. AS ENGINE WARMS UP, EASE CHOKE LEVER TO OPEN POSITION"hand tools, vintage chainsaws, david mann, mann wodonga

This chain was part of the official regalia worn by the Mayor of the City of Brighton before the amalgamation into Bayside City Council in 1994. The chain was seen as an outward sign of power, authority, and responsibility and was a formal, full-dress type of regalia that was worn by the mayor over their robes at ceremonial functions. The large central drop medallion featured the design of the council seal and the links of the chains detail the name and date of each appointed Mayor. This council seal features the Brighton coastline with a pier extending to the water, a sail boat in the distance and a train on the right of the pier. It was displayed by Council on its flag and letterhead and in municipal buildings and can still be seen on the portico of Brighton Town Hall. The seal was used from 1919, when Brighton was declared a city, until 1970, when an official crest was issued by the British College of Heraldry. Brighton was first incorporated as a borough on 18 January 1859, it became a town on 18 March 1887 and was proclaimed a city on 12 March 1919.9 carat yellow gold and enamel mayoral chain for the City of Brighton. Consists of 61 small oval links, with a scroll listing significant dates in Brighton's history as a centrepiece and a large 'drop' medallion of the City of Brighton seal below. Each oval link has a central plaque inscribed with a mayor's name and dates of their office surrounded by a thin coiled edge and a thick decorative border. The earliest Mayor is W.P. Francis 1918-19 and the latest is K.D. Oliver 1994-95. The links are joined by cable chain and form a long circular chain with two crosspieces of additional links at the back, the upper crosspiece contains four links, while the lower piece contains three links. The chain has a large oval medallion/pendant of the City of Brighton seal which is surrounded by a thin coiled gold edge, a border containing raised lettering 'CITY OF BRIGHTON' above and a Coat of Arms below. This is also surrounded by a coiled edge. The oval piece is then wrapped around with a thick laurel wreath with small berries. The central part of the medallion contains a coloured enamel image of the Brighton coastline with sand in the foreground, a pier extending out into the water, a sailboat in the distance and a train on the right of the pier. The small Royal Coat of Arms of the United Kingdom below includes a coloured enamel shield flanked by a lion and unicorn with a motto inscribed on a ribbon underneath 'DIEU ET MON DROIT'.mayoral chain, city of brighton, lega, ceremonial wear, seal, medallion, mayor, coat of arms, crest, bayside, mayoral regalia

This chain was part of the official regalia worn by the Mayor of the City of Sandringham before the amalgamation into Bayside City Council in 1994. The chain was seen as an outward sign of power, authority, and responsibility and was a formal, full-dress type of regalia that was worn by the mayor over their robes at ceremonial functions. The large central drop medallion features the design of the council sea, and the links of the chains are made of cutwork initials of each Mayor. The Sandringham seal was designed by Sans and McDougal had been selected in 1917, by a special committee and its main features are the Sandringham pier and breakwater, with a yacht in full sail as an inset, supported by two dolphins. The motto reads 'Omni Opere' which translates to ‘With all earnestness.’9 carat yellow gold mayoral chain for the City of Sandringham. Consists of two concentric circles of 57 small oval links, with an Australian Coat of Arms as a centrepiece and a large 'drop' medallion of the City of Sandringham seal below. Each oval link is made up of the cutwork initials of a mayor, the surrounding oval border has an inscription above the initials which gives the mayor's name; an inscription below gives dates of office; the earliest is Cr. B.J. Ferdinando 1917-18, and latest is Cr. S.T. Russell 1993-94. The ovals are surrounded by decorative scrolls and are joined by small curb chains. The outer circle contains 31 links, while the inner contains 26. On both shoulders sit decorative bars, joining the front of the chain to the back. The main medallion has an oval central panel that features the coloured Sandringham seal in enamel depicting two sailboats in the water, a pier protruding from the left, a coastline on the right with two pine trees. Above the scene are decorative triangles in light blue and yellow, above which is another section in dark blue containing a third sailboat. The seal is flanked by two engraved dolphins and above it sits an engraved St Edward's gold crown filled with red enamel. Below the seal, there is a ribbon containing the Latin motto 'OMNI OPERE' which is engraved and filled in dark blue enamel. The pendant is surrounded by cutwork lettering reading 'CITY OF SANDRINGHAM / 1919' and leaf decorations. The medallion is inscribed on the reverse with important dates in Sandringham's history. A fleur-de-lys joins the medallion to the Australian Coat of Arms centrepiece above. The Coat of Arms features a shield, depicting symbols of Australia's six states, in enamel, flanked by an engraved kangaroo on the left and emu on the right. Below it sits a ribbon engraved 'ADVANCE AUSTRALIA'.mayoral chain, ceremonial wear, seal, medallion, mayor, coat of arms, crest, bayside, blashki & sons, city of sandringham, sandringham, omni opere, blashki, mayoral regalia, motto, st edward's crown, sans and mcdougall

RAAF wings badge with chain and clipRAAF 9ctAPE D (9F)

The story of this item is unknown. It may have been part of a man’s watch chain, with the watch missing. Its weight suggests it is an item of good quality, one owned by a person of substance and a common item for a wealthy man to have in the 19th and early 20th centuries.This item, in our collection for many years, has no known provenance and is kept for display purposes. This is a silver chain with silver links with a metal match holder at one end, a silver container in the shape of a ship’s wheel in the middle and a locket or coin holder at the other end.. The match holder is heavily patterned, the ship’s wheel container may have held coins in the past as it is recessed at the back and the locket or coin purse is ornamented and contains what looks like a coin, perhaps a threepenny bit from the time of George V or V1. The coin could be Australian or English. warrnambool history, men’s accessories

A boxed ball point pen and key chainuniversity of ballarat, merchandise, pen, key chain

Henry Sutton is a talented world-wide accepted inventor with inventions relating to the telephone, photography, wireless, cars, motorcycles, and bicycles as well as many more inventions. Henry was also one of four brothers that ran the Sutton's Music Store after the death of their Father Richard Sutton. Henry Sutton taught Applied Electricity at the Ballarat School of Mines in 1883 to 1886. Metal framed frosted glass rectangle with chain and connectors on one end. henry sutton, glass, frosted glass, framed glass

Inner case marked with S/N ECTK 632

Written on backing sheet, 'Sir Dallas Brooks (Governor), placing mayoral chain on Mayor Lavis after declaring Ringwood a City - 1960'.

A pocket watch (or fob watch) is a watch that is made to be carried in a pocket. Watches were also mounted on a short leather strap or fob, when a long chain would have been cumbersome or likely to catch on things. This fob could also provide a protective flap over their face. Watch chains were introduced about 100 years after pocket watches first appeared in the 16th century. This item is an example of a popular piece of men's jewellery often considered to be a symbol of importance.Man's double, silver fob chain with key for watch.On fob chain - GILTchain silver fob-chain jewelry costume-accessories- male

Cr. Mary Grant of Hurstbridge served as the North Riding Councillor for the Shire of Eltham. First elected in 1990 and required to retire by 1995. She was the Shire President at least 1992-1993. Source: Shire of Eltham 1993 Handbook. It is believed that this photograph was taken after Cr. Grant's term as President. EDHS Newsletter No. 216, May 2014, p4 Mayoral Chain of Office R.C. McLellan and family donated a Chain of Office to the Shire of Eltham to be worn by the Shire President on formal occasions. With the amalgamation of councils in 1994 this was transferred to the Shire of Nillumbik to be used during the mayoral year. Eltham had a Shire President whereas Nillumbik has a Mayor. Many municipalities have a collar or chain of office for ceremonial purposes. Traditionally these symbolise or denote the formal leadership role of office. This chain is part of the Visual Art Collection held by Nillumbik Shire Council and is now on display in the Council Chamber area in the Civic Centre at Greensborough. Matcham Skipper and Myra Skipper were commissioned by the McClellan family to create the gold-plated silver chain shown being worn by Eltham Shire President Peter Graham in 1990, with Bob McLellan and Matcham Skipper (centre). Nillumbik Shire Council has asked that the following credit information is used when the chain is displayed, or images reproduced. Matcham SKIPPER (1921-2011) and Myra SKIPPER (1920-1996) Mayoral (Presidential) Chains of Office 1976 Gold plated silver 60cm x 32cm x 1cm (variable) © The Estate of Matcham and Myra Skipper Donated by RC McLellan and Family Visual Art Collection: Nillumbik Shire Council [Picture: Nillumbik Mayoral Chain of Office] [Picture: Bob McLellan, Matcham Skipper and Eltham Shire President Peter Graham -1990]The Presidential Chain of Office is now a significant part of the Nillumbik Shire Council's art collection.Colour photograph Councillor Mary Grant in Shire President Regaliacouncillors, eltham shire council, shire presidents, mary grant, nillumbik shire art collection, presidential chain of office

Set of three documents involved in the acquisition and installation of a crane trolley and two tonne chain block at the depot December 2014. Purchased from GB Fasteners December 2015. .1 - "Kingcrome Workshop chain block" - owners assembly and operating manual. .2 - "Austlift Beam Girder Trolley Instruction Manual" - ditto .3 - "Austlift Test certificates" - for the above girder trolley.tramways, trams, btm, equipment, certificates, depot

Silver metalwork chain purses were made in tiny coils and formed into patterns in the early nineteenth century. This example is made of fine silver mesh.This item formed part of a large collection of items collected by Dorothy Rogers, a notable local historian and founding member of the Kew Historical Society.Hand-linked silver rings, with silver frame and clasp.purses, bags - handbags, fashion accessories, clothing accessories