The Royal Melbourne Regiment collar badge, its in red and gold colour

The 1st Royal Australian Naval Bridging Train (1st RANBT) was formed in Melbourne on 28 February 1915 and was intended to be a horse drawn engineering unit attached to the Royal Naval Division (RND), then serving as infantry on the Western Front. The term ‘train’, in its title, was a direct reference to the horse drawn wagons that would, in theory, form and move ‘in train’ to carry the unit’s heavy lumber, building materials and engineering equipment to the front. The unit was manned by members of the Royal Australian Naval Reserve for whom there were no available billets in seagoing RAN ships. Many of the sailors serving in the 1st RANBT were rated ‘drivers’, and again, this refers to wagon drivers as opposed to motor vehicle drivers. Other seamen were rated as ‘artificers’ or ‘sappers’, the latter being a military term traditionally used to describe army engineers. Appointed in command of the 1st RANBT was Lieutenant Commander Leighton Seymour Bracegirdle, RAN. Bracegirdle was ideally suited to command the unit, having seen active service with the NSW Naval Brigade during the Boxer Rebellion in China as well as serving as a military officer in the South African Irregular Horse during the Boer War in 1901. He had also recently returned from German New Guinea where he had served as a staff officer in the joint Australian Naval and Military Expeditionary Force (ANMEF) responsible for the capture of the German colonies in the Pacific in September 1914. Three hundred naval reservists, including 50 men who had recently served in New Guinea, were selected for the 1st RANBT and they began their training in horsemanship, engineering and pontoon bridging at the Domain in Melbourne. By late May 1915 a decision was made to send the unit to Britain to complete its training and then to join the RND on the Western Front. The plan, however, never eventuated. The complaints about the non-combatant work being done by the men had been raised in Federal Parliament and following consultation with the senior Australian officer in the Middle East, Lieutenant General Sir Harry Chauvel, a recommendation was made that the unit be disbanded and its men used as reinforcements for the AIF. Consequently, Lieutenant Commander Bracegirdle was advised that his unit was to be dispersed; its men transferring to the AIF or being returned to Australia for discharge. On 27 March 1917 the 1st RANBT was officially disbanded.Oxidised brass anchor shaped collar badge.ww1, world war 1, first world war, ranbt, ran bridging train, royal australian navy bridging train, collar badge

World War 2 era collar badge featuring Kings Crown. Part of the Cooper Collection. See Cat. No. 9585.2 for details of service for "Keith Cooper" No. 3798359.Bronze coloured Rising Sun collar badge with fastening clips on back.Stamped on badge: 'Australian Commonwealth Military Forces'.cooper collection, keith cooper, rising sun badge

Object. Brass collar badge for Australian Field Artillery (Militia) 1901-1912. Brooch style attachment device on back. Badge in shape of a bomb with flames coming out of top. Bomb surrounded by a laurel wreath. Imprinted on the bomb is a wheeled cannon. A banner beneath the bomb has the word ''AUSTRALIA''.numismatics, badges - military, artillery collar badge

Collar Badge, Army Metal dull, one, missing lug.badge/buttons, army

Proudly worn by soldiers of the 1st and 2nd Australian Imperial Force in both World Wars, the 'Rising Sun' badge has become an integral part of the digger tradition. The distinctive shape of the badge, worn on the upturned side of a slouch hat, is commonly identified with the spirit of Anzac.The Third Pattern - May 1904 The third pattern Rising Sun badge carried a scroll inscribed with the words ‘Australian Commonwealth Military Forces’ and was worn throughout both World Wars. There were, however, a number of variations of the badge; a special version was struck for the coronation of King Edward VII in 1902 and there were badges of the Commonwealth Horse and the Australian Instructional Corps, each with its respective title on the scrolls. This pattern badge formed the template for all subsequent General Service badges.Rising sun collar badge circa 1940s with words in scroll across bottom of badge 'Australian Commonwealth Military Forces'Australian Commonwealth Military Forces embossed on scroll at bottom of the badgebadge, rsing sun badge, third pattern rising sun badge, badge hat

4 Austn. All rising sun collar badges00514.1 Anodised Rising sun collar badge 00514.2 Anodised Rising sun collar badge 00514.3Copper/Brass alloy Rising sun collar badge 00514.4 Brass fretted Rising Sun collar badge

Part of the Reverend Chaplain Major Thomas Bruce Williams, No. 556101, Collection.Six gold coloured crucifix shaped collar badges. Each has two pins on the back to which are attached brass press clips foe fastening to a collar.army chaplain, collar badge, insignia, major thomas b. williams.

Dental Corps Lapel Badgebadge/buttons, ww2 +, army

Imperial Japanese Army Infantry Captain's collar insignia. Three silver stars on soiled red material and three rows of tarnished gold wire braid mounted on a square khaki patch.

Imperial Japanese Army Infantry Lieutenant's collar insignia. Two silver stars on red material and three rows of gold wire braid.

Imperial Japanese Army Infantry Corporal's collar insignia. One silver star on soiled red material and soiled gold braid mounted on a blue cloth patch.

Australian Commonwealth Military Forces

Rising sun WW2 collar dog.badge/buttons, ww2, army

Part of the Cooper Collection. See Cat No. 9586.2 for details of service, Keith Cooper, No. 3798359.1. & 2. Collar badge featuring gold and silver coloured metal RAEME insignia. Two pins on back. 1. has clips on each pin.cooper collection, keith cooper, collar badges, raeme

Part of the Kevin John Herdman, No. 397661, Collection. See Catalogue No. 5942P for details of his service record.RAASC officer's metal collar badge. The badge is bi-metal construction using silver and gold coloured metals. The silver metal background features a Queen's Crown and a seven-pointed star. Gold coloured metal is circular in shape with a royal cypher in the middle. Blue and red enameling in the centre. On the back are two loop fittings.Stamped on gold coloured metal: ' ROYAL AUSTRALIAN ARMY SERVICE CORPS'. Printed in gold on blue enamel garter: 'MONI SOIT QUI MAL Y PENSE'. Stamped on back: 'STOKES, MELB'.badge, uniform, royal australian army service corps, kevin john herdman

Part of the Kevin John Herdman, No. 397661, Collection. See Catalogue No. 5942P for details of his service record.RACT officer's collar badge. Badge is constructed of gold and silver plastic. Silver coloured laurel wreath is mounted on a gold coloured seven-pointed star. A Queen's Crown is located at the top of the star. Laurel wreath encloses a Royal Cypher and blue garter featuring silver lettering. Two metal pins on back for fastening to a collar.Printed on blue garter: ' ROYAL AUSTRALIAN CORPS OF TRANSPORT'. At bottom of wreath: 'PAR ONERI' Stamped on back: 'SWAN & HUDSON'.badge, uniform, royal australian corps of transport, kevin john herdman

These collar badges were for Officers of RAE. (Royal Australian Engineers). Ubique is translated as "Everywhere".Two WO golden collar badges with the word "UBIQUE" across bottom, mounted above is a round basket on bomb out of which is coming spreading flames. On back small hook on top and bottom.On bottom written in latin "UBIQUE"badges, rae

Hat badge & 2 collar badges of the 4th Light Horse Regiment.x 3 gold coloured metal badges mounted on blue velvet coloured cards, featuring a kangaroo & motto. Hat badge & collar badges of 4th Light Horse Regiment. Each badge is attached via ring & split pin.numismatics-badges-military, metalcraft, passchendaele barracks trust

1941 40mm 2-pounder brass anti tank gun shell case made into a vase with 5 splayed points at top the casing with the collar insignia badge on front.Insignia - Australian Commonwealth Military Forces (collar badge). Outer edge under shell - 1941 LOT 110 RM/C 2PR No1. Inner area under shell - 1941 113 11-41anti-tank, gun shell, trench art, 1941, vase

RAR Collar Badges - threebadge/buttons, 2000, army

Collar badges for tunic (2)badge/buttons, ww1, army

1941 40mm 2-pounder brass anti tank gun shell case made into a vase with 5 splayed points at top the casing with the collar insignia badge on front.Insignia - Australian Commonwealth Military Forces (collar badge). Outer edge under shell - 1941 LOT 113 RM/C 2PR No2 Inner area under shell - 1941 110 11-41 No/2 MK1gun shell, anti-tank, trench art, 1941, vase

Hat and Collar Badges. RAR Infantrybadge/buttons, current, army

USA Master Sargeant Collar Badgebadge/buttons, army

WW1 Raising Sun collar badge

HAT and Collar Badges. RAA Nursing Corpsbadge/buttons, army

Army Pay Corps Hat and collar badgesbadge/buttons, army

Collar Badges x 2 WW1 or WW2badge/buttons, army

Collar badge Mothers & Sweetheart Mourning Strippersonal item, ww1, army