A coolamon is an Indigenous Australian carrying vessel. It is a multi-purpose shallow vessel, or dish with curved sides, ranging in length from 30–70 cm, and similar in shape to a canoe. Coolamons or pitchis were traditionally used by Aboriginal women to carry water, fruits, nuts, as well as to cradle babies. The necessary tools and equipment for hunting, fishing and warfare were one of the very few items that Aboriginals carried with them from place to place. Most were used for a multiplicity of purposes. Because many were made from raw natural materials, such as wood, generally only partial remains are found today. This container is an example of an implement used by the early Indigenous people of Eastern Australia.A large shallow elongated hand-made wooden receptacle used by Australian aborigines as a container for food and drink or for carrying babies.pitchi coolamon aboriginal container

A "hot box" in the US Army typically refers to a thermal food container used to transport hot group meals to the field. Transportable hot or cold food containers with a large insulted box with three inserts.US/DO NOT HEAT CONTAINTERS OVER OPEN FLAMEvietnam, hot box, us army, united states army, captain glass, 2 field ambulance

These glass containers were probably used as food containers.These bottles are examples of glass food containers commonly used in the first half of the 20th century.Two clear glass bottles. They have a screw thread and are six-sided ( two curved and four flat).M 843 O F245glass-containers bottles food-containers

This glass jar is an example of a food container used in the first half of the 20th century.A small clear glass jar with a screw thread top. It would have been a food container.F 1098 AGM M 816glass-jar bottle-food-container

Steel food container with ten small air vents at top of sides (no lid with item) used for kitchen hand tools and utensils7330-66-028-6012. Food Container, Delivery w/lid. Camp Earmark Bandiana Log Grp food container, australian army

This is a food cover, most commonly used in homes in the days before refrigeration and plastic containers. It usually contained food, mainly meat, to protect it from flies, heat or draught while allowing the air to circulate around it and it could be hung in sheds, kitchens, cellars etc. This food cover is retained as a memento of domestic objects used in the past and will be useful for display purposes.This is a food cover made of metal with a circular base and decorative sides, finely pierced to create a mesh pattern. It has a fluted and patterned top with a ring handle. It is rusted.vintage kitchen items, warrnambool & district historical society collection

Small round woven rattan Chinese food container with lid, brown tones, handle of 3 glass beads, pink & Yellow joined by knotted cotton plus unravelled silk tassel.domestic equipment, food storage & preservation, chinese

Early settler women in Moorabbin Shire c1900, were skilled in crochet and made these doilies to cover milk jugs, and other food containers, to protect the contents from flies and other insects while on the kitchen table.The women of the early settler families in Moorabbin Shire c1900, were very skilled with craftwork, crochet, knitting, sewing, needlework.A crocheted cotton doily with raised decoration of a cup and saucer. Coloured beads anchor the points to add weight to keep the doily in place when protecting contents of a cup or jugpioneers, earley settlers, haberdashery, craftwork, crochet, doileys, kitchen equipment, moorabbin shire, bentleigh, moorabbin, ormond, cheltenham,

Black and white photograph of the Meals on Wheels kitchen at the Silver Grove Citizens Club, Blackburn. Man at table which is covered in pre-packed food containers. 1994. Meals are now supplied by a contractor and the kitchen at the centre is no longer used for meal preparation. (2011)silver grove citizens club, meals on wheels, silver grove, nunawading

Type MK1 (ie mark 1) mess tin used as a food container by Australian military servicemen during WWI. This mess tin is made of tin plated steel, has a carrying handle and clips for a shoulder strap. There is a folding handle inside of the removable lid section.australian, australia, ww1, world war 1, mess tin, food container

ACME Field Days are an expo event where exhibitors, particularly from the agricultural sector, can display and promote their products. In the early 2000s, Arthritis Victoria (AV) brought its Healthy Bones Bus to some of these events in Timboon to spread the 'strong bones, healthy joints' message to south west Victoria. This initiative was made possible through a partnership with the Moyne Shire Council. This photo depicts an Arthritis Victoria representative staffing AV's Healthy Bones Bus information stall at an ACME Field Day at Timboon, in south west Victoria.COL photo of a woman sitting on a deck chair in front of a large van. The van has a large door open on the side, displaying the text, "Osteoporosis Victoria 1800 011 041" (partially obscured). Below the text, there is a display board with some posters on it. Hanging from the edge of the van door is a long vertical banner with the text and logo for the Moyne Shire. In front of the side of the van (beside the woman), there is a rectangular table covered with a blue tablecloth. On it, there is a range of healthy food items such as cereals, various types of milk, cheeses, yoghurt, a plastic ice cream container, some canned food, and some fresh fruit. In the foreground, to the left of the frame, there are some metal steps with a ballustrade.arthritis foundation of victoria, afv, osteoporosis victoria, ov, arthritis victoria, av, acme field day, healthy bones bus, outreach, education, information stall, healthy food, heathy diet, calcium, bone health, strong bones, timboon, moyne shire, sponsorship, partnership, c2000s

ACME Field Day is an expo event where exhibitors, particularly from the agricultural sector, can display and promote their products. In the early 2000s, Arthritis Victoria brought its Healthy Bones Bus to an Acme Field Day event in Timboon to spread the 'strong bones, healthy joints' message to south west Victoria. This initiative was made possible through a partnership with the Moyne Shire Council. This photo depicts the Healthy Bones Bus set up at an ACME Field Day at Timboon.COL photo of a large van parked on the grass. Wide double doors on the side of the van are open, displaying the text "Arthritis Victoria 1800 011 041" on one door, and "Osteoporosis Victoria 1800 011 041" (partially obscured) on the other door. Inside the van, there are built-in cupboards, shelves displaying brochures and fact sheets, a small table, and two air conditioning units up high on one wall. In front of the van, next to the retractable metal steps, there is a small table covered with a bright blue tablecloth. On it, there is a range of healthy food items such as cereals, various types of milk, cheeses, a plastic ice cream container, some canned food, and some fresh fruit. Next to the table, there is a bright blue fabric deck chair.[On a yellow sticky note, handwritten in black ink] ACME Field Day - Timboonarthritis foundation of victoria, afv, osteoporosis victoria, ov, arthritis victoria, av, acme field day, healthy bones bus, outreach, education, information stall, healthy food, heathy diet, calcium, bone health, strong bones, timboon, moyne shire, sponsorship, partnership, c2000s

ACME Field Days are an expo event where exhibitors, particularly from the agricultural sector, can display and promote their products. In the early 2000s, Arthritis Victoria (AV) brought its Healthy Bones Bus to some of these events in Timboon to spread the 'strong bones, healthy joints' message to south west Victoria. This initiative was made possible through a partnership with the Moyne Shire Council. This photo depicts an unidentified man staffing AV's Healthy Bones Bus information stall at an ACME Field Day at Timboon, in south west Victoria.COL photo of a man standing next to a rectangular table and a deck chair, which have been set up in front of a large van. The van has a large door open on the side, displaying the text, "Osteoporosis Victoria 1800 011 041" (partially obscured). Below the text, there is a display board with some posters on it. Hanging from the edge of the van door is a long vertical banner with the text and logo for the Moyne Shire. The table is covered with a blue tablecloth. On it, there is a range of healthy food items such as cereals, various types of milk, cheeses, yoghurt, a plastic ice cream container, some canned food, and some fresh fruit. In the background, built-in cupboards, boxes and crates, and a television set affixed to the wall are evident inside the van.arthritis foundation of victoria, afv, osteoporosis victoria, ov, arthritis victoria, av, acme field day, healthy bones bus, outreach, education, information stall, healthy food, heathy diet, calcium, bone health, strong bones, timboon, moyne shire, sponsorship, partnership, c2000s

ACME Field Days are an expo event where exhibitors, particularly from the agricultural sector, can display and promote their products. In the early 2000s, Arthritis Victoria (AV) brought its Healthy Bones Bus to south west Victoria to spread the 'strong bones, healthy joints' message to regional areas. This initiative was made possible through a partnership with the Moyne Shire Council and Moyne Health Services. This photo depicts an Arthritis Victoria representative and an unidentified man staffing AV's Healthy Bones Bus information stall at an ACME Field Day.COL photo of two men standing behind a rectangular table in front of a large van. On it, there is a range of healthy food items such as cereals, various types of milk, cheeses, yoghurt, a plastic ice cream container, some canned food, and some fresh fruit. The van has a large door open on the side, displaying the text, "Osteoporosis Victoria 1800 011 041". Below the text, there is a display board with some posters on it. Hanging from the inside edge of the van door is a long vertical banner with the text and logo for the Moyne Shire. Behind the men, there is a large "Moyne Health Services" banner (partially obscured) attached to the ballustrade on the side of the van. In the background, there is a bale of hay on the grass, and two vehicle or trailer wheels are evident behind it.arthritis foundation of victoria, afv, osteoporosis victoria, ov, arthritis victoria, av, acme field day, healthy bones bus, outreach, education, information stall, healthy food, heathy diet, calcium, bone health, strong bones, south west victoria, moyne shire, moyne health services, sponsorship, partnership, c2000s

A yellowed clear plastic rectangular shaped container with embossed inscriptions on the lid. The container contains 5 packets of food rations. The largest packet is rectangular in shape and composed of brown paper. It has inscriptions on the front which detail the ingredients within. The second largest packet is also rectangular in shape and composed of brown cardboard. It also has inscriptions on the front detailing the indredients within.......

ACME Field Days are an expo event where exhibitors, particularly from the agricultural sector, can display and promote their products. In the early 2000s, Arthritis Victoria (AV) brought its Healthy Bones Bus to south west Victoria to spread the 'strong bones, healthy joints' message to regional areas. This initiative was made possible through a partnership with the Moyne Shire Council and Moyne Health Services. This photo depicts an unidentified woman staffing AV's Healthy Bones Bus information stall at an ACME Field Day.COL photo of a woman standing behind a rectangular table in front of a large van. On it, there is a range of healthy food items such as cereals, various types of milk, cheeses, yoghurt, a plastic ice cream container, some canned food, and some fresh fruit. The woman is affixing a display label to the top of a milk carton. The van has a large door open on the side, displaying the text, "Osteoporosis Victoria 1800 011 041" (partially obscured). Below the text, there is a display board with some posters on it. Hanging from the inside edge of the van door is a long vertical banner with the text and logo for the Moyne Shire. Behind the woman, there is a large "Moyne Health Services" banner attached to the ballustrade on the side of the van. In the foreground, to the left of the frame, there are some metal steps with a ballustrade. In the background, some market stall tents and marquees are evident, with tables and deck chairs underneath them.arthritis foundation of victoria, afv, osteoporosis victoria, ov, arthritis victoria, av, acme field day, healthy bones bus, outreach, education, information stall, healthy food, heathy diet, calcium, bone health, strong bones, south west victoria, moyne shire, moyne health services, sponsorship, partnership, c2000s

Lid for ship's tanks used for early domestic water storage (1860's) at the lightstation The water tank and lid are probably from the same unit that was used for transporting drinking water or perishable dry goods on ships. The unit comprised a large, riveted metal tank which was fitted with a heavy cast iron round lid to form a hermetically sealed container. It had a rubber sealing ring ‘which was screwed tight with the aid of lugs cast into the lid and wedges cast into the rim of the loading hole’. A raised iron rod welded across the outer face of many lids allowed for screwing the lid tight. Ship tanks were invented in1808 by notable engineer, Richard Trevithick and his associate John Dickinson. Their patent obtained the same year described the tank’s superior cubic shape that allowed it to fit squarely as a container in ships and thus use space efficiently, while its metal fabric preserved and secured its contents, whether liquid or solid, from damage. The containers revolutionised the movement of goods by ship and made wooden casks redundant. Research by Michael Pearson has determined that they were carried on passages to Australia from at least the 1830s, conveying ships’ victuals and water storage as well as general goods heading for the colonies, and by the 1870s they were in common use. Once in the colonies, the tanks were often recycled and adapted for many resourceful uses such as water tanks, packing cases, dog kennels, oil containers and food stores and this invariably led to the separation of the lid and tank. Raised lettering on the lids indicates that nearly all of the ship tanks transported to Australia came from London manufacturers, and it was usual also for the brand name to feature as a stencil on the associated square tank but in most cases this eventually wore off. It is not known if the Wilsons Promontory tank retains its stencil, and the heavy lid will need to be turned over to reveal its manufacturer’s name. How it came to the lightstation is also not known, but it was either brought to the site as a recycled tank or salvaged from a shipwreck. Pearson writes that Ship tanks show up at a wide range of sites, many of them isolated like lighthouses. They were, I think, usually taken there for the purposes they filled, usually water storage, as they were readily available, relatively light to transport, and probably very cheap to buy as second‐hand goods containers. In rural areas they may have been scavenged for their new uses from local stores, to whom goods were delivered in them. Recycled to serve as a water tank, the Wilsons Promontory tank is the last surviving example of several that were used at the site to hold water for domestic consumption. The tank has had its lid removed and a tap fitted to the one of the sides. It stands on concrete blocks next to a building to receive water running off the roof via a metal pipe. Wilsons Promontory is the only lightstation managed by Parks Victoria with a tank container, although Cape Otway and Point Hicks have lids. Parks Victoria has identified four other lids which include two at Point Hicks, one manufactured by Lancaster and Co. the other by Bellamy. Cape Otway also has two, one unidentified and the other by the Bow Tank Works, East London, which produced tanks between 1910 and 1930. Pearson notes that ‘surviving lids are far less numerous than the tanks themselves, presumably because the uses to which the tanks were put did not require the lid to be retained’. The tank and lid, which are possibly part of the same unit, have first level contributory significance for their historic values and rarity. Round ship's tanks lid, iron.

This series of photos depicts appliances and equipment kept within easy reach in a kitchen. The photos, date-stamped "89 1 5", were taken during a visit to the home of Arthritis Foundation of Victoria member, Margaret. They were taken to accompany an article by Occupational Therapist, Pat Dwyer. Titled, 'Suggestions for independent living', the article and accompanying photo appear on page 10 of the Vol 2 No 1, March 1989 issue of the Arthritis Foundation of Victoria's quarterly magazine, Arthritis Update. It outlines the steps taken by Margaret to facilitate the daily challenges of living independently with arthritis. In this photo, a cat sits in front of its food and water bowls - a plastic tub and bucket which have had long strings attached to them. Instead of the arthritic pet-owner having to bend down to the floor to fill the cat's food and water bowls, the container and bucket can be gently lowered or raised to and from the floor, as required, with minimal effort. Although this particular photo was not published, it is a good example of a home-made arthritis aid.B&W photo of a cat sitting in front of a food container and small bucket, both of which have strings attached to them. Behind the container and bucket is a cupboard. The photo is date-stamped "89 1 5" in white text on the bottom left side of the image layer. This self-made kitchen aid is described in an article on page 10 of the March, 1989 edition of Arthritis Update in an article by Occupational Therapist, Pat Dwyer. Titled 'Suggestions for independent living', it outlines the steps taken by Arthritis Foundation member, Margaret, to facilitate the daily tasks involved when living independently.[In blue ink on a yellow sticky note] Cat at feed bowl, strings for hoisting container to bench height are visible.arthritis foundation of victoria, afv, rheumatism and arthritis association of victoria, raav, pat dwyer, occupational therapist, ot, arthritic aids, kitchen aids, kitchen gadgets, home-made aids, cat bowl, cat, feeding pets, living with arthritis, living independently, pain management, arthritis update, 1989

The heavy cast iron, round lid was originally fastened into a large, riveted metal box, known as a ship tank. It has the name ‘John Bellamy London’ cast in capitals in a continuous circle on the outer edge of the lid face, and the words ‘Byng St Millwall’ on the inner circle. , of Millwall, London, manufactured boilers and ship tanks from the 1860s to the 1930s and came from a family of tank makers who began manufacturing tanks some time before 1856. Ship tanks were invented in 1808 by notable engineer, Richard Trevithick and his associate John Dickinson. Their patent obtained the same year described the tank’s superior cubic shape that allowed it to fit squarely as a container in vessels and thus use space efficiently, while its metal fabric preserved and secured its liquid or solid contents from damage. The containers revolutionised the movement of goods by ship and made wooden casks redundant. Research by Michael Pearson has determined that they were carried on passages to Australia from at least the 1830s conveying ships’ victuals and water storage, as well as general goods heading for the colonies. Pearson found photographic evidence of their use in the 1860s, and by the 1870s they appeared to be in common use. lids surviving from containers indicate that nearly all the tanks transported to Australia came from London manufacturers. It was usual for the brand name to also feature as a stencil on the tank but in most cases this eventually wore off. A tank without its original stencil survives at Wilsons Promontory. Tanks transporting ‘drinking water or perishable dry goods were hermetically sealed by the use of the tightly fitting lid with a rubber sealing ring ‘which was screwed tight with the aid of lugs cast into the lid and wedges cast into the rim of the loading hole’. The raised iron rod welded across the outer face of many lids such as the Bellamy example, allowed for screwing the lid tight. Once in the colonies, the ship tanks were often recycled and adapted for many resourceful uses such as packing cases, dog kennels, water tanks, oil containers and food stores and this invariably led to the separation of the lid and tank. The Bellamy lid could have been salvaged from a shipwreck but is more likely to have to have originated from a recycled tank that was brought to the lightstation for water storage purposes. Pearson writes that: Ship tanks show up at a wide range of sites, many of them isolated like lighthouses. They were, I think, usually taken there for the purposes they filled, usually water storage, as they were readily available, relatively light to transport, and probably very cheap to buy as second-hand goods containers. In rural areas they may have been scavenged for their new uses from local stores, to whom goods were delivered in them. Parks Victoria has identified five tank lids in the lightstation collections covered by this project. In addition to the Bellamy lid at Point Hicks, they include a Bow brand lid at Point Hicks and another at Cape Otway, unidentified lids at Cape Otway and Wilsons Promontory. Pearson and Miles Lewis have each recorded two versions of the Bellamy trade name on the lids; one being ‘John Bellamy Byng St. London’; the other, ‘John Bellamy Byng St. Millwall London’. The Point Hicks lid has the second version of the name, as do other examples in Victoria that Lewis has identified at Illawarra, Toorak; Warrock homestead, Casterton; Eeyeuk homestead, Terang; Ward’s Mill, Kyneton; and Boisdale homestead near Maffra, and in NSW at Ayrdale Park, Wolumla; and Bishop’s Lodge, Hay. Pearson’s list includes the same lids in NSW at Tumbarumba; the Quarantine Station, Sydney; Willandra Station; Bedervale, Braidwood; Gunnedah Museum; Walla Walla and Macquarie Island. The Point Hicks lid is currently stored in the lighthouse although it is unlikely that its use had any association with this building. The lid is in good condition and retains the central bung. Pearson notes that ‘surviving lids are far less numerous than the tanks themselves, presumably because the uses to which the tanks were put did not require the lid to be retained’.347 The Bellamy ship tank lid has first level contributory significance for its historic values. Circular cast-iron disc with raised outer ridge with inscription. It also has an inner depression with inscription. Two metal sections form handles over inner depression. Hole in middle of disc.Around perimeter of outer edge "JOHN BELLAMY LONDON" Around inner area "BYNG ST MILLWALL"

The history of metal packaging began in Bohemia in the 1200s. Metal has been produced for a very long time. But the first metal used for packaging was tin. In particular, it was the process of tin plating that was invented in Bohemia. Before this no other metal was economically able to be used for packaging. Later, in 1667 Andrew Yarranton, and English engineer, and Ambrose Crowley brought the method to England. Here it was improved by ironmasters including Philip Foley. Then by 1697, John Hanbury had a rolling mill at Pontypool in South Wales. The method they developed involved rolling iron plates using cylinders. This process enabled more uniform blank plates to be produced than was possible by just hammering the tin. https://www.shilohplastics.com.au/history-of-metal-packaging/The use of tin to protect and store food and other items, revolutionised the world.Tin container painted yellow with printed crosses and circles,. The lid is labelled "Robur Cross Stitch Company" and "R" imprinted in the centre although the lid is badly corroded. ‘Cross – Stitch’ (printed green in small crosses and circles) followed by ‘Nett Weight ¾ lb. (printed beige in crosses and circles). Pure Blended Tea. Robur Tea Co Ltd’ flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, robur tea co ltd, tea, tea caddy, tin, tin plating, food containers

This Kandy Koola Tea tin dates to the early 20th century and was made and sold in Melbourne, Victoria. It once belonged to the Giles family. About Kandy Koola Kandy Koola ran an advertisement in the West Gippsland Gazette on 2 May 1911 promoting its tea as perfect for a picnic. The text reads “Picnicing. All as hungry as hunters – made a fire of small twigs – put on our billy of fresh spring water – and waited. Soon bubble, bubble, bubble and the billy boiled. In goes the pure Kandy-Koola Tea. Tea! Tea is not the word – it tasted like nectar! One cup, two cups, three cups – then had to make a fresh billy full. Lazed away the rest of the day sipping our Kandy Koola and chatting. How good indeed! “All grocers sell Kandy Koola Tea. It is pure leaf, selected and blended with the greatest care and skill. Ask your grocer for Kandy Koola. Sold in three grades, i.e. red, blue and green packets” About the Giles Family There are many 19th century items of furniture, linen and crockery donated to Flagstaff Hill Maritime Village by Vera and Aurelin Giles. The items are associated with the Giles Family and are known as the “Giles Collection”. These items mostly came from the simple home of Vera’s parents-in-law, Henry Giles and his wife Mary Jane (nee Freckleton), whose photos are in the parlour. They married in 1880. Henry Giles was born at Tower Hill in 1858. He was a labourer on the construction of the Breakwater before leaving in 1895 to build bridges in N.S.W. for about seven years. Mary Jane was born in 1860 at Cooramook. She attended Mailor’s Flat State School where she was also a student teacher before, as family legend has it, she became a governess at “Injemiara” where her grandfather, Francis Freckleton, once owned land. Henry and Mary’s family of six, some of whom were born at Mailor’s Flat and later children at Wangoom, lived with their parents at Wangoom and Purnim west, where Henry died in 1933 and Mary Jane in 1940. The Giles family collection has social significance at a local level, because it illustrates the level of material support the Warrnambool community gave to Flagstaff Hill when the Museum was established. The tin and the tea that was in the container are significant for their association with the Australian and Victorian food industry, being blended and packed by John Connell and Co, Proprietary Limited Melbourne.Container; tin, for Kandy Koola Tea, part of the Giles Collection. Round tin, green background, gold band on top and bottom, printed on gold background. Ceylon flavoured tea. Also five gold flowers of various sizes with scalloped band, large golden inscription “Kandy Koola Tea” and “Ceylon Flavoured” and “Blended and packed by John Connell & Co Pty Ltd Melbourne” “Kandy Koola Tea” and “Ceylon Flavoured”and and “Blended and packed by John Connell & Co Pty Ltd Melbourne”. Printed on lower band “MADE AND PRINTED BY WILSON BROS. NORTH MELB.” “1LBS NETT”flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, giles family, 19th century domestic items, tea, tea merchant, tea tin, food and beverages, giles collection, henry giles, tower hill, warrnambool breakwater, mailor’s flat, wangoom, 19th century household goods, metalcraft, tinware, kandy koola tea

The Ovens pottery operated from 1881 to1892 they had taken over H L & E pottery at Beechworth in 1888 but mounting debts forced the Ovens company to close in 1892. During their short ten years of operation they produced stoneware garden urns, vases, cheese dishes, ginger beer bottles, butter coolers, water filters, wine and spirit barrels, bread plates, jugs, teapots, storage jars, pots, tiles, flower pots, spittoons, basins, bowls, demijohns, lidded crocks, pipes and bricks.A significant item made by an early Australian pottery in Beechworth Victoria, this company made many utilitarian items for the Victorian domestic market. It gives us today a snapshot into early Australian companies that were unable to sustain manufacturing their products into the 20th century, due in part to the rising imports of cheaper items from overseas.Red terracotta butter cooler comprising, round base with ridged lip, and bell shaped, domed lid with spherical handle on topMarked "Ovens Pottery, Co Ltd, Patd 1890, Beechworth" flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, cooler, terracotta cooler, utensil, kitchen ware, terracotta, food container, food preservation, butter cooler, ovens pottery

The 1846 London Directory lists David Bumsted & Co., trading at 86 Lower Thames Street, 35 Bridge Wharf, City Road Basin & 338 Wapping High Street Droitwich, as a salt merchant. The London Gazette had the following announcement dated 30th November 1887 advising his partnership with John Campbell Bumsted, carrying on business at 36, King William-street, in the city of London, as Salt Merchants, is dissolved as and from this date; and that the business will be continued to be carried on by the said John Campbell Bumsted alone.A rare item now sought after by collector of ceramics and significant as a collectors item from the late 19th century.Glazed Container; cream coloured ceramic salt jar, round shaped, Has lion and unicorn emblem and inscription impressed on outside. "D.BUMSTEAD & CO.\ ROYAL BRITISH TABLE SALT \ 86 LOWER THAMES ST \ LONDON"flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ceramic container, salt jar, d. bumstead & co, london salt merchant, food and drink, doulton & co

In early civilization's cereal grains such as maize, wheat, barley etc. were stored in large airy buildings, often raised up from the ground to reduce infestation by pests and vermin. Ancient Egyptian and early Hebrew writings include reference to such buildings. Smaller quantities of food were stored in baskets made from woven grasses or leaves. In more recent times but prior to the invention of the refrigerator many food products were stored in the home as preserves or pickles, often in heat sealed jars. Dry food items were stored in vermin proof metal containers and could be found in any early colonial kitchen. Items such as coffee, tea, rice and sago were stable food types and needed longer term storage and a higher degree of protection from vermin and the elements, a common material used during this time was sheet metal or tin such as is used today in a common form of storage the biscuit tin. An early example of colonial food storage used in a domestic setting, it is interesting to note the subject items have provision to be locked. This indicates the value early colonial settlers placed on the contents and used to prevent pilfering. The subject items are now sought by collectors. Canister set; set of four canisters. Cylindrical matching kitchen storage tins with hinge lid that has a latch closure, and a folding handle on top of lid. Canisters are painted brown and the body has a graphic of a scroll in gold with printed label of contents. The canisters range from small to large, "COFFEE", "TEA" , "SAGO", " RICE" (respective RNs 163.1, 163.2, 163.3, 163.4)Respectively labelled "COFFEE," "TEA," "SAGO," "RICE" flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, canister, canister set, rice canister, kitchen canister, food storage, domestic item