Fire irons or pokers are essential equipment for people with open fireplaces such as those used for domestic heating in the 19th and early 20th century.This fire iron is significant for representing the type of equipment used in the 19th and early 20th century for used with open heating.Fire poker, iron, painted black, shaped from a steel barflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, fire iron, fire poker, domestic heating, open fireplace

A fender is part of the hardware used in open fireplaces to prevent the fire from spilling out of the fireplace. Wood fires were the main source of domestic heating in the 19th century.This fender is significant for its association with domestic heating in the 19th and early 20th century.Fire fender, cast iron, painted black, sides bolted onto front as is base plateflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, shipwreck coast, great ocean road, fire fender, fire guard, domestic heating, fender

The Mont Eltham Pot Belly Stove History The Mont Eltham Pot Belly Stoves were first manufactured in the 1960s at the Burrowes family business The Lyn Iron Foundry in Coburg Victoria by Barry and his father Charles Thomas Burrowes. The manufacture of The Mont Eltham Pot Belly continued in Victoria as The Mont Eltham Stove Co. by Barry and Glenda Burrowes in Montmorency and later in Thomastown. The castings were produced by leading Melbourne foundries, Cox & Rosetti , and Anderson & Ritchie. They were also made in Ballarat by The Harding Bros Foundry, and in Shepparton by The Furphy Foundry. The Mount Eltham pot belly stoves were manufactured until the late 1980s. Stove; cast iron pot belly stove. Very large cylinder shape with square base, grate shelf around centre, on 4 legs. Inscription on door. "Swagman" model. Made by Mont Eltham Stoves, Victoria. "Mont Eltham Stoves Vic Swagman Aust"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, domestic heating, domestic heating, stove, pot belly stove, wood fired stove, old world stove, the mont eltham stove co., the lyn iron foundry, barry and glenda burrowes

Stoves of this design are used for heating domestic places and were available in many designs and shapes. They commonly used wood as fuel. They were used for both heating and cooking. This stove was part of the original furnishings of the 1922 vessel 'Reginald M', a South Australian coastal trader. The two-masted coastal ketch was built from material and fittings obtained from salvage yards by Mr Jack (John) Murch of Birkenhead, Port of Adelaide, South Australia. Its construction took approximately six months. It was launched at Largs Bay in 1922. ‘REGINALD M’ 1922 to 1975- The vessel “Reginald M” was a two-masted coastal ketch, owned and built by Mr. Jack (John) Murch of Birkenhead, Port of Adelaide, South Australia. Its construction took approximately 6 months, and it launched at Largs Bay in 1922. The Reginald M’s purpose was to serve the coastal trade of South Australia, to carry cargo cheaply and efficiently. Some have said that the keel was in fact hewn from two telegraph poles! Its builder frequented all the salvage yards for materials and fittings. Reginald M had a very shallow draft and a flat bottom that enabled it to come close to shore and to sit high and dry at low tide or to be beached on sand. The flat bottom was also to make the ship able to skim over reefs. Wagons could load and unload direct from its side. Her cargo included Guano, Barley, Wool, Horses, Cattle, Timber, Explosives, Potatoes, Shell Gritt and Gypsum. On April 9th 1931Reginald M weathered a large storm in St Vincent Gulf, SA. The vessel suffered great damage; mast snapped and the crew laboured for four hours to free it by chopping off the past and rigging. The crew patched iit up and slowly returned to Port Adelaide with only a portion of the insured cargo being damaged. Her crew members at the time were owner Mr John H Murch of Wells Street Largs Bay, Skipper Mr R Murch – John’s brother, Murray – son of Captain Murch and Seaman John Smith. Reg Webb purchased Carribie Station, at Marion in the Warooka District, south of Adelaide, in 1921. He cleared the land and farmed sheep and grain. In 1923 he shipped his own wool and grain from Marion Bay, having first carted 300 bags of the barley grain, 12 bags at a time, along the unmade track to the jetty. A photograph donated to Flagstaff Hill, dating about 1929 - 1942, shows two men on the Reginald M, holding between them their fishing catch of a large hammer shark. The photograph is stamped “GRENFELL STUDIO PORT LINCOLN PRINT” and titled “hammer shark caught on Reginald Emm”. The donor’s family lived on the Your Peninsular and despatched their grain from a chute at Gleeson’s Landing to the awaiting transport vessel. Reg knew the Murch Brothers from Port Adelaide. The brothers had been using their ketch Reginald M to ship Guano from the Islands, led by Captain Richard Murch. Reg approached them in 1934 about shipping grain from Marion Bay. The brothers visited the bay and thought it was an ideal place. They showed Reg where to stack his grain, and they measured up the cliffs. When Reg was ready, they brought down and installed a ninety-foot wooden chute. The bags of grain individually pushed down the chute, landing in a waiting small boat then rowed to Reginald M, 14 bags at a time. After 10 hours Reginald M would have a load of 1300 bags of grain to ship to waiting ports. At one time a wild storm destroyed the chute, so they built a stronger replacement chute. Reginald M engaged in the shipping of grain from there until 1938. In 1940 Able Seaman Allan H Lucas served on Reginald M between September and December, being engaged and discharged from Port of Adelaide. The ship’s Master, W S Murch, signed his Certificate of Discharge. It seems that at the Reginald M was used at one time as a Customs vessel, as one photograph in Flagstaff Hill’s collection shows “H.M.C. No. 3, Pt Adelaide” on the bow. In 1969 the last freight left Marion Bay on the ketch Reginald M carrying grain, wool, and explosives. In late 1970 the Mt. Lyell Mining and Railway Company bought the vessel to use as a barge to carry explosives. In 1972 the Navy League of Strahan, Tasmania, purchased it for use by the Strahan Sea Cadet Unit to use at Macquarie Harbour and renamed iit T.S. Macquarie. However, this plan for use of Reginald M did not happen. In 1974 Mr. Andrew Rennie, of East Brighton, Melbourne, bought it for a similar purpose, paying $5,000 and donating a ‘Cadet of the Year” trophy to the Sea Cadets. He sailed it from Strahan to Melbourne, planning to use it for pleasure sailing. Also, in 1975 Reginald M was bought by the Melbourne Ferry Company auction. Later in 1975 Flagstaff Hill Maritime Museum bought the Reginald M for $20,000. It became a popular exhibit in the Village’s lake. In 2006, using funds from a $4,000 government grant, restoration continued the vessel. Flagstaff Hill Maritime Village’s Collection holds other artefacts associated with Reginald M. They include - Photographs of the Reginald M, including one photograph of iit in Outer Harbour, S.A. dated 1947, with Skipper- R.F. Dale and Owner- John Murch. Another shows it docked at Port Adelaide, with the lettering H.M.C. No. 3 Pt ADEL (standing for His/Her Majesty’s Customs). There is a black and white photo of it at a wharf and another showing a person on board. - a lifebuoy, made of cork, with the inscription of “Pt Adelaide” on it. - Helm section, removed and replaced during restoration. - a bullet found in pieces of timber when Reginald M was restored in 1979 Reginald M was a much-loved exhibit at the Maritime Village, where many visitors enjoyed boarding and exploring a real ship with a long history. Sadly, in late 2016, the Reginald M was decommissioned due to the continuing prohibitive cost of maintenance and the risk to public safety. Components from the Reginald M are preserved as part of Flagstaff Hill's collection. The stove is significant as it represents the heating and cooking appliances used in the late 19th and early 20th centuries, both on board vessels as well as for domestic purposes. The stove has additional significance for its association with the vessel "Reginald M", a coastal trading ketch from South Australia built in 1922 at Largs Bay. It is one of the very few sailing coastal trading vessels built in Australia, with its flat bottom, single chine shape designed for navigating shallow water. Stove: a cast-iron, rectangular, four-legged stove with a hinged front door. This stove was part of the original furnishings of the vessel 'Reginald M', built in Adelaide in 1922. Inscription on the side. Image of a log cabin with an illegible inscription below it.flagstaff hil, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, coastal trader, trading vessel, vessel reginald m, ketch, john murch ship builder, reg webb, carribie station, mt lyell copper company, queenstown navy league, andrew rennie, melbourne ferry company, r.f. dale, port adelaide vessel reginald m, macquarie training vessel, grenfell studio port lincoln, stove, domestic heating, domestic cooking, heater, cooking unit, wood fired stove, wood stove, wood-burning stove

In the industrialized world, as stoves replaced open fires and braziers as a source of more efficient and reliable heating, models were developed that could also be used for cooking, and these came to be known as kitchen stoves.  The first manufactured cast-iron stove was produced at Lynn, Mass., in 1642. This stove had no grates and was little more than a cast-iron box. About 1740 Benjamin Franklin invented the “Pennsylvania fireplace,” which incorporated the basic principles of the heating stove. The Franklin stove burned wood on a grate and had sliding doors that could be used to control the draft (flow of air) through it. Because the stove was relatively small, it could be installed in a large fireplace or used free-standing in the middle of a room by connecting it to a flue. The Franklin stove warmed farmhouses, city dwellings, and frontier cabins throughout North America. Its design influenced the development of the pot-bellied stove, which was a familiar feature in some homes well into the 20th century. The first round cast-iron stoves with grates for cooking food on them were manufactured by Isaac Orr at Philadelphia, Pa., in 1800. The base-burning stove for burning anthracite coal was invented in 1833 by Jordan A. Mott. The subject item is a mid to late 19th century settlers stove probably of Canadian manufacture imported into Australia around this time. The stove gives us a social snapshot into what life must have been like for our early colonialists using this device for heating and cooking in their meagre homes. Cast iron stove with four-legs, 2 plates on top and a hinged front door. The door has been cast with a maple leaf design and the sides have a pattern cast into them.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, stove, domestic heating, domestic cooking, heater, cooking unit, pot belly stove, wood fired stove, wood stove

Firedogs is the common name for andirons and Chenets and have been in use since ancient Greek times. Firedogs are the decorative metal supports or stands that hold logs in a fireplace, allowing air to circulate around the fire to keep it burning, and preventing logs from rolling out of the fireplace. They are usually made of metal, cast iron or steel, but are sometimes ceramic. They have two feet joined across the front and one at the back. Some firedogs, mainly for kitchen use, were plain with forked uprights so that a bar could rest between them on which a cooking pot or a roasting spit could hang. Some firedogs are made in the likeness of animals, shields, crosses, figures and keys. This pair of firedogs are representative of the firedogs that were common to domestic use in previous centuries when home heating and cooking were only possible with open fires. Firedogs or andirons, pair of two decorative cast iron log supports for use in a fireplace hearth. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, fire dogs, firedogs, fire grates, log stands, domestic furniture, open fireplace equipment, andirons, chenets, domestic heating

Fire irons like this one were an essential piece of domestic equipment as hey were used for the open fires.This iron poke is a piece of equipment essential for the open fireplaces used for 19th and early 20th century domestic heating.Fire poker, iron, painted black, shaped from a cylindrical rodflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, fire poker, fire iron, domestic heating

This iron poker is a piece of equipment essential for the open fireplaces used for 19th and early 20th century domestic heating.A long steel vintage fire poker with a turned knob handle and square reinforced pointed end. It was used to move wood and logs in an open fire.fireplace accessories, fireplaces, fire irons, pokers

This decorative fire screen is placed in front of an open fireplace to prevent hot sparks and ash from causing damage. Open fires were common in Australia in the 19th and early 20th century, for both cooking and heating.Fire screen, crescent shaped, brass pressed sheet, with a ship motif within a rectangular area. Ship is a 3 masted sailing vessel, a Spanish galleon. Made in England, c. 1930.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, fire screen, fire guard, domestic item, heating, cooking

Fire iron stand; black, all metal stand with a singular spine attached to rectangular base. below the handle on the spine is a horizontal 'U' shaped rack with a hook at each end and a hook at the centre back of the 'U' for hanging tools. Decorative metal handles on tools and rack. 4 parts; stand, brush, shovel, poker. Impressed into underside of stand "B1O2" and " ATWN"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, fire iron stand, fire iron, fire tools, fireplace set, fire iron set, domestic ware, heating

Tin electric bed heater with 2 pin plug.domestic equipment, heating, bed heater, k78

Wooden bellows belonging to Ola Cohn. It has a tree design on the handle and on the centre part several metal stud holding the leather to the wooden frame. It has a metal ending. Also in the box, photocopied typed sheet of the resume of Ola Cohn (Carola) M.B.E., A.R.C.A. 'Blossom'. It includes illustrations. Date unknown. (see also 3300.88).domestic equipment, heating, bellows

Metal fire screen shaped as a leaf. Painted pcture on the screen of pink roses and green leaves on a green background. Back has three metal vertical supports attached. Two outside supports serve as legs. A fourth metal support is attached as a hinged adjustable third leg.domestic equipment, heating, fire screen

Black metal kerosene heater with removable brass container that holds the kerosene. The heater has a metal handle and is decorated with metal cut outs. It also has an imitation cover with red glass.Valor Made in England 525-Rdomestic items, heating

Glass baby feeding bottle marked in millimetres and ouncesAgee Pirex Feederdomestic items, heating

Collected by DonorBed Warmer, Electric, with Hot Water. Bed warmer was filled with hot water to keep bed warm. It was also covered with material or a sock. Cardboard box.Magic Electric Bed Warmerdomestic items, heating

Collected by Donor.Bed Warmer (with hot water). Bed Warmer was filled with water. To keep bed warmer, it was covered with fabric. Cylindrical shape, with electric plug at one end.domestic items, heating

Green metal thermos flask with fixed dome lid and handle.domestic items, heating

One bar electrical radiator(on back) 'Hollinwood/Ferrant/England/Watts 600/Volts/Cat No 660/AU/CM/01domestic items, heating

Hot water would have been poured into container and placed in bed before retiringPorcelain cylinder shaped bed warmer with porcelain plugdomestic items, heating

Large brass kettle on four legged stand. Wooden handledomestic items, heating

Manufacturing History Museum Victoria|Commentary: Australian manufacturing history Philip Wollen|Many years ago, when I was an ambition young man, I took over a company called Hecla. This business was formed in 1872, long before Federation was even contemplated. The company established a rich tradition in the Australian manufacturing industry. The prodigious product range included kettles, mixers, toasters, hairdryers, urns, pie warmers, bain maries, and electric blankets for the domestic and commercial market. During the war it even manufactured parts for aircraft. It was one of Melbourne's largest employers.|Hecla was one of the pioneers in TV advertising, led by icons like Bert Newton, Bobby Limb, Evie Hayes and Graham Kennedy who ad Jibbed his way through irreverent and unscripted naughtiness about Hecla electric blankets and foot warmers. The slogan was 'By Hecla, its good.'. One can imagine the fun Bert and Graham had with their double entendres.|In the 60's Hecla entered into a partnership with General Electric and expanded rapidly. The massive factory, on the corner of Alexandra Parade and Chapel Street overlooking the Yarra River was a Melbourne landmark.|The business was formed by one of the scions of Melbourne industry. Mr Marriott was a metal worker of some repute, building the lights in front of Melbourne's Parliament House, the first steam car, the sideboard at the RACY Club, and the first factory to run on electricity.|By the time I acquired the company it was a shadow of its former self, incapable of competing with cheap Chinese imports. Wandering around the warehouse late one night I discovered a large, boarded up storeroom which appeared not to have been opened in decades.|Over several months I combed through the room, unearthing a treasure trove of products from a bygone era. Dusty files, engineering drawings, wooden prototypes, patent records, and correspondence from distributors on every continent.|I decided to track down an old man, Ray, long retired after 50 years with Hecla. He was not well off financially and welcomed the paid work. It turned out that he had done his apprenticeship with the company and there wasn't much he didn't know about it. He had been personally involved in the manufacture of almost every type of product on the Hecla smorgasbord's of products.|So for over 2 years he methodically assembled a mini museum of Hecla products, painstakingly polishing them and ensuring they were in working order. He attached the original brochure of each product and their respective warranty cards. For him it was ,a labour of love. For me it was a fascinating, if vicarious journey, into Australia's manufacturing past.|My colleagues complained that I was wasting money on his salary, our time and factory space on stuff that should have been dumped years ago. I tried to explain that I was merely a steward of the Hecla tradition, not merely an owner. Besides, the look on Ray's face convinced me that there was another dynamic at work. One I could see, but didn't really understand.|After he Passed away I faced a dilemma. What to do with this 'museum' of Hecla history. Nobody was interested.|So I kept the 'stuff' in private storage, hoping that same day someone would be interested in it. And the years passed.|Finally, I had a brainwave. Perhaps the Melbourne Museum would be interested. It was a long shot but I made the call. I had a nagging suspicion that they would think I was simply trying to get them to relieve me of paying for this huge collection to be taken to the tip.|To my surprise they said they would be willing to take a look, I secretly hoped that they would take the whole collection and not leave me with an incomplete jumble of appliances that I would indeed have to take to the tip.|On the appointed day, four serious looking young people showed up. Armed with digital cameras, note books and poker faces they spent four hours analysing the goods and the supporting materials. I asked them if they had any interest and their response was decidedly non-committal. It depends on the acquisitions committee, I was told. I was disheartened and packed up the exhibits to go back into storage.|Imagine my surprise when months later they telephoned to say that they had researched the history of the company, and yes, they would like to take the whole collection. And a truck with 'handlers' would arrive the following day to pick it up. Two years ago all Hecla's archives left me forever and went to the Museum's warehouse.|Well, to my delight I received a call yesterday inviting me to a private viewing of the exhibition at the Melbourne Museum. These young historians had meticulously assembled an impressive display of Melbourne's industry and technology going back to the 1800's. They thanked me like a significant benefactor when it is I who should have thanked them.|I saw the excitement in the eyes of these young people who had somehow managed to dig out and assemble memories from Australia's past. If this is the standard of care that the curators of the Melbourne Museum show all their exhibits, our history is in safe hands.|Their meticulous work took me back to those years long ago when I saw an old man lovingly assembling and cataloging a lifetime of his work.|It took me back to the day when Australians actually made things. Long before we became a nation of quarrymen. Before we became animal-factory 'farmers'. Of a time when products didn't break down, or dumped and replaced before the warranty expired. When men like Mr Marriott cared deeply about what their hands produced.|It reminded me of the call I received from an elderly lady in Tasmania asking for the electrical element for a Hecla K7 kettle. I searched the archives and called her back. The K7 was produced decades earlier and we no longer carried that spare part. She was quite disheartened and told me her kettle had finally 'given up the ghost' and she couldn't bear to part with it. It was a present from her husband on their wedding day 45 years ago. Her final words were 'they don't make them like that, do they? By Hecla they were good.'|I'm glad I followed my instinct and put Ray back on the payroll all those years ago..|I like to think Mr Marriott would have been pleased.Large electric heater with two radiator bars and a protective grille at the top and false coals at the bottom.Replacements for this fire - Elements No. F314 - Illuminators No. 3P. Berry's Electric Ltd - Volts 230 - 240 -Watts 2000 V/AD/Cat No. 454 . Made in Australia by Hecla Electrics Pty Ltd Melbournedomestic items, heating

In use by Bayliss Family for many yearsBrass cylinder with nipple at one end. Equipped with wooden handled metal plunger, leather cup and steel spring in interior. Air-primer for kerosene stove or kerosene iron.domestic items, heating, irons, stoves

Used by Colin Sach during his employment as Manager of the Chemistry Dept. at the University of Melbourne over a period of forty years.Manufacturing History Museum Victoria Commentary: Australian manufacturing history Philip Wollen Many years ago, when I was an ambition young man, I took over a company called Hecla.|This business was formed in 1872, long before Federation was even contemplated. The company established a rich tradition in the Australian manufacturing industry. The prodigious product range included kettles, mixers, toasters, hairdryers, urns, pie warmers, bain maries, and electric blankets for the domestic and commercial market. During the war it even manufactured parts for aircraft. It was one of Melbourne's largest employers.|Hecla was one of the pioneers in TV advertising, led by icons like Bert Newton, Bobby Limb, Evie Hayes and Graham Kennedy who ad Jibbed his way through irreverent and unscripted naughtiness about Hecla electric blankets and foot warmers. The slogan was 'By Hecla, its good1'. One can imagine the fun Bert and Graham had with their double entendres.|In the 60's Hecla entered into a partnership with General Electric and expanded rapidly. The massive factory, on the corner of Alexandra Parade and Chapel Street overlooking the Yarra River was a Melbourne landmark.|The business was formed by one of the scions of Melbourne industry. Mr Marriott was a metal worker of some repute, building the lights in front of Melbourne's Parliament House, the first steam car, the sideboard at the RACY Club, and the first factory to run on electricity.|By the time I acquired the company it was a shadow of its former self, incapable of competing with cheap Chinese imports. Wandering around the warehouse late one night I discovered a large, boarded up storeroom which appeared not to have been opened in decades.|Over several months I combed through the room, unearthing a treasure trove of products from a bygone era. Dusty files, engineering drawings, wooden prototypes, patent records, and correspondence from distributors on every continent.|I decided to track down an old man, Ray, long retired after 50 years with Hecla. He was not well off financially and welcomed the paid work. It turned out that he had done his apprenticeship with the company and there wasn't much he didn't know about it. He had been personally involved in the manufacture of almost every type of product on the Hecla smorgasbord's of products.|So for over 2 years he methodically assembled a mini museum of Hecla products, painstakingly polishing them and ensuring they were in working order. He attached the original brochure of each product and their respective warranty cards. For him it was ,a labour of love. For me it was a fascinating, if vicarious journey, into Australia's manufacturing past.|My colleagues complained that I was wasting money on his salary, our time and factory space on stuff that should have been dumped years ago. I tried to explain that I was merely a steward of the Hecla tradition, not merely an owner. Besides, the look on Ray's face convinced me that there was another dynamic at work. One I could see, but didn't really understand.|After he Passed away I faced a dilemma. What to do with this 'museum' of Hecla history. Nobody was interested.|So I kept the 'stuff' in private storage, hoping that same day someone would be interested in it. And the years passed.|Finally, I had a brainwave. Perhaps the Melbourne Museum would be interested. It was a long shot but I made the call. I had a nagging suspicion that they would think I was simply trying to get them to relieve me of paying for this huge collection to be taken to the tip.|To my surprise they said they would be willing to take a look, I secretly hoped that they would take the whole collection and not leave me with an incomplete jumble of appliances that I would indeed have to take to the tip.|On the appointed day, four serious looking young people showed up. Armed with digital cameras, note books and poker faces they spent four hours analysing the goods and the supporting materials. I asked them if they had any interest and their response was decidedly non-committal. It depends on the acquisitions committee, I was told. I was disheartened and packed up the exhibits to go back into storage.|Imagine my surprise when months later they telephoned to say that they had researched the history of the company, and yes, they would like to take the whole collection. And a truck with 'handlers' would arrive the following day to pick it up. Two years ago all Hecla's archives left me forever and went to the Museum's warehouse.|Well, to my delight I received a call yesterday inviting me to a private viewing of the exhibition at the Melbourne Museum. These young historians had meticulously assembled an impressive display of Melbourne's industry and technology going back to the 1800's. They thanked me like a significant benefactor when it is I who should have thanked them.|I saw the excitement in the eyes of these young people who had somehow managed to dig out and assemble memories from Australia's past. If this is the standard of care that the curators of the Melbourne Museum show all their exhibits, our history is in safe hands.|Their meticulous work took me back to those years long ago when I saw an old man lovingly assembling and cataloging a lifetime of his work.|It took me back to the day when Australians actually made things. Long before we became a nation of quarrymen. Before we became animal-factory 'farmers'. Of a time when products didn't break down, or dumped and replaced before the warranty expired. When men like Mr Marriott cared deeply about what their hands produced.|It reminded me of the call I received from an elderly lady in Tasmania asking for the electrical element for a Hecla K7 kettle. I searched the archives and called her back. The K7 was produced decades earlier and we no longer carried that spare part. She was quite disheartened and told me her kettle had finally 'given up the ghost' and she couldn't bear to part with it. It was a present from her husband on their wedding day 45 years ago. Her final words were 'they don't make them like that, do they? By Hecla they were good1'|I'm glad I followed my instinct and put Ray back on the payroll all those years ago..|I like to think Mr Marriott would have been pleased.Square metal box with electrical elements inside. Used to stand on or to put feet on when sitting. Elaborate pattern in centre with inscription.Hecla Foot Warmerdomestic items, heating

Polished copper kettle. Lid seems to have been soldered into kettle.domestic items, heating

Pair wooden bellows with leather inset and metal funnel. Metal studs.domestic items, heating