From the collection of Betty McPheeA black bakelite pen with gold ink lever, pocket grimp and circle trim around lid. Top of lid has gold Swan insignia. Gold nib. Engraved on side, 'Swan' self filler; Mabie, Todd & Cribb; Made in England. Includes Insignia Trade Mark. Swan across barrel near nib.Swan self filler|Mabie, Todd & Cribb|Made in Englanddomestic items, writing equipment

Wooden cigar box probably from the mid 20th century. The inside of the top of the box has a picture of an Eastern woman with coins and flowers. Perlas - is a small cigar taking 30 minutes to smoke. This cigar contains Manila filler.Top: GEM OF THE EAST / MANILA / FILLER Side: PERLAS (on label). 25 (burned on wood). Label along edges of top, sides and bottom - "PUROS FABRICA DE TOBACCO - FLORFINA"smoking, cigars, perlas, gem of the east

This cigarette or pipe lighter was in use in the mid 1900's when the majority of users were men. Ladies did smoke but mainly not in "public" The activity was still regarded as a male activity. Middle to Upper "Class" of women nearly always had a gentleman "at hand" that would "light up" her cigarette. This was seen as a "social" activity only but later in the mid 1900's onward it was quite acceptable for both sexes to "smoke" at anytime.This type of lighter was male orientated due to the degree of lighting the flint with the horizontal movement required a strong thumb action across the lighting wheel. It is significant to rural areas such as the Kiewa Valley as the majority of men (especially during and after World War II) regarded smoking as a way to ease off the "tension" of hard work. The socio-economics of the Australian work place changed after the emancipation of women in the "workforce" after the World War II depleted the male workforce for the duration of the War and changed the Australian ethics of women in all aspects of both city and rural working "so called" male only occupations.This Roller Beacon lift arm cigarette/pipe lighter has a chrome plated brass shell and is fueled by petrol. To operate this lighter you lift the "snuffer" arm(long roller lift arm) exposing the horizontal external flint tube, then scrape the flint wheel to create a spark (to light the wick) from the adjacent flint(resting on the brass ignition wheel).At the base to the left of the "filler" screw "PATENT No. 485037, 818155" underneath "REG. DES. N" on the filler screw "ROLLER REG" underneath "TRADE MARK". To the right of the "filler", "THE ROLLER BEACON MADE IN ENGLAND"early hand lighters, smoking in the 1930's, cigarette lighter, cigarette, tobacco

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden objects. Traditionally, moulding planes were blocks of wear-resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers' shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other workers to pull the plane ahead of the master who guided it. John Moseley & Son: Records indicate that before 1834, the firm is listed at number 16 New Street, London and according to an 1862 advertisement the shop had been established in New Street since 1730, The Sun insurance records from the time show that John Moseley was the possessor of a horse mill in the yard of his premises, which means that some kind of manufacturing was taking place, as the mill would have provided power to run a saw or perhaps a grinding wheel so the probability is that he did not just sell tools, he made them as well. John Moseley died in 1828 and his will named his four sons: John, Thomas, William and Richard. To complicate matters he also had brothers with the same first names; brothers Richard (of Piccadilly) and William (of Peckham Rye) are named as two of the executors. Brother Thomas is not mentioned in this will, but became a minister and was one of the executors of brother Richard's estate when he died in 1856. From John's will, we also learn that, although the shop was in New Street, he resided in Lympstone, Devon. The family must have had a house in that county for quite some time as both sons Richard and William are baptised in Devon, although John and Thomas were baptised in London. In the 1841 and 1851 census records, we just find William in New Street, but in 1861 both William and Richard are listed there as toolmakers. That Richard was staying overnight at New Street was probably just accidental as in 1851 and 1871, we find him with his wife Jane and children in Clapham and Lambeth respectively. In 1851 Richard is listed as “assistant clerk cutlery warehouse” and in 1871 as “retired plane maker and cutler”. Although the actual place of work is not stated, one may assume he worked in the family business. 1862 is a year full of changes for the firm. In that year, William had a new property built at 27 Bedford Street. In the catalogue for the 1862 International Exhibition, 54 Broad Street (later 54-55 Broad Street) is listed for the first time, which may very well coincide with the split of the business into a retail and a wholesale branch. Around the same time, they must have moved from New Street to 17 & 18 King Street because their manufacturing premises had been pulled down to form the New Street from Cranbourne Street to King Street. In January 1865, William died and Richard continued the business. In 1867, the partnership he had with his son Walker and Thomas Elis Hooker, is dissolved. Richard continued tool-making at King Street and Bedford Street. Richard retired somewhere between 1867 and 1871, but the business continued. The business is taken over by W M Marples & Sons and tools continued to be made in London until 1904 when manufacturing relocated to Sheffield.A vintage tool made by a well-known company, this item was made commercially for firms and individuals that worked in wood and needed a tool that could remove large amounts of timber. These jack or dressing planes came in various shapes and sizes to achieve a flat and even finish to timber surfaces and came in many sizes. A significant tool from the mid to late 19th century that is still in use today with early models sought after by collectors. It gives us a snapshot of how furniture and other finishes were created on timber by the use of cutting-edged hand tools. Tools that were themselves handmade show the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative or even finish that was needed for the finishing of timber items.Jack Plane metal body with rose wood filler.Mosley & Sons London No 2flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, john moseley & son, jack plane, woodworking tool, carpenders tools, cabinet makers tools

Round Miners Lamp with screw filler long spout and wick.Miners Lamps Engraved R Davidson Stawellmining, gold

canten used to carry waterManufactured and sold by Holden and FrostCanvas water canteen with brass filler screw on cap. Two attachment rings fixed with leather strapscanteen, water carrier

Bag used to carry waterManufactured and sold by Holden and Frost rectangular shaped canvas bag with brass filler cap. Metal rings attached to bag by leather strapsFROSTcanvas, leather, brass

Used to carry waterManufactured and sold by Holden and FrostSmall canvas water canteen with brass filler screw. Two metal rings attached to leather strapscanteen, water carrier

The Feuerhand lantern works were established in Beierfeld in the Saxon Ore Mountains. Called Erzgebirge in German or Krušné hory in Czech, is a mountain range in the south of Saxony in Germany known for its craftwork. Lantern production began in the area by Hermann Nier who ran a plumber's workshop around the 1870s and made lanterns, amongst other things. In the town of Beierfeld, also well-known for its metalworking were the brothers Hermann and Ernst Nier who founded a modern production centre for hurricane lanterns manufacture in 1893. Five years after the foundation, the company Frankonia (Albert Frank metalware) bought up the production site and the brothers Nier became production managers. Owing to differences with Frankonia, Hermann Nier finally started its hurricane lantern factory "Hermann Nier Feuerhandwerk" in 1902. In the same year, he applied for a patent for the manufacturing of lanterns using the stamping and folding techniques with tinning by hot-dipping and without hand-soldering. In 1914 the trademark "Feuerhand" was registered for all products as a utility model of the German Reich in German: "Deutsches Reichs-Gebrauchsmuster" (DRGM) and in 1920 the round Feuerhand emblem was added to the brand. Finally, in 1926 the patents, as well as the trademark "Firehand", were also registered in the USA. The manufacture of the well-known small hurricane lanterns the “Baby Series” complete with fireproof borosilicate glass from the Firma Schott firm from Jena started in 1933. Between 1918 and 1938 Nier Feuerhand became the biggest producer of hurricane lanterns in the world. Production continued until 1990.A significant item that demonstrates from its fabrication a manufacturing process that was far in advance of its time and that influenced the production of lanterns from many other manufactures around the world. These types of lanterns made by Feuerhand around the early 20th century are now sought after by collectors.Monarch style Lantern painted black. Made in Germany has Freuerhand, manufactures logo on filler cap and top of lamp centre postflagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, hurricane lantern, kerosene lamp, feuerhand lantern works, albert frank metalware, hermann and ernst nier

Former Officers' Mess propertySilver (EP A1) water jug with removable filler cap. A screw cap on spout is secured by a chain. Vertically set handle.Under base and under cap: "Crusader E.P.A.1" Engraved: "Presented by Lt Col J Boyce CO Jan 87 - Jan 89"mess silver, water jug, boyce, mess silver, water jug, boyce

Used to carry water for drinking while riding a horseAs manufactured and sold by Holden and FrostRectangular shaped canvas container with brass screw top filler tube. Two leather straps with a wooden rood as a carry handleThe Refreshercanteen, water container

Bakelite mottled green fountain pen. 'Swan' brand.Swan Brand - Self Filler|Mabie, Todd + Co Ltd. Picture of a swan pressed on pen and pocket clip. Made in Englanddomestic items, writing equipment

Modesty front to be worn as a filler with a low cut blouse or dress.Lace modesty front. Bobbin lace motifs appliqued onto machine made net.

Commercially made quilt, c.1930s. Maker unknown, found in Ballarat. The Country Women's Association of Victoria had been active during the Depression in promoting the use of wool in domestic items and handcrafts in its "Handcrafts and Home Industries Committee". In 1933 during "Wool Week", a train jointly sponsored by the Wool Board, toured the state demonstrating amongst other crafts, the making of wool quilts and mattresses. Commercially made quilts much like this one marketed as 'Kosy Quilts', were used in these demonstrations.Quilt, plain light blue cotton cover with lambs wool filler. Machine sewn. Evidence of a label can be seen at one corner, however it has been removed.quilting history, textile mills, running stitch group, running stitch collection, ballarat, quilting - history

Part of the Running Stitch collection. Possibly made in the Ballarat area.Heavy weight domestic waggaWAGGA/ Maker Unknown. 108cm long X 67cm wide/ Floral cotton cover with filler of old garments/ Running Stitch Collection/ c/- Barbara Macey/ ...handicrafts quilting quilting - history, running stitch collection, running stitch group, handicrafts, quilting, quilting - history

Manual - single foolscap sheet, photocopied, titled "MMTB Ansair Bus bodies sealers", giving details of the various sealing compounds or fillers to be used on MMTB bus bodies built by Ansair.Date circled in black felt pen.trams, tramways, buses, maintenance, manual, ansair, mmtb

Railway Yards Stawell looking towards Napier Street. Man beside loading ramps and steam train water filler visible B/W photograph Looking towards napier Street. Townhall clock in the Background. The Gentleman is unknown.stawell railways transport

Carbide Bicycle lamp, with locking fixing attachment, reflector, glass and burner. Has red and blue side light. Printed on carbide bowl "Miller's Regalia British Made" Switch and carbide filler on top.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Lamp base, metal with removable lamp-holder. Label attached R 12 x A "ORAC" inscribed on burner control. Removable Lamp cover. Filler cap engraved "Wick Patent 19267/24 Trimmer" .flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Items in the collection re Tom Glazebrook, refer Cat No 4330.2 for his service details. 1.& 2. Double sided Jungle green shoulder boards. On top are: Metal Gilt QE2 Crown with Mauve filler. RAE gilt Corps badge. On rear are two J.G. cloth bands used for mounting on eppaulette.army, rank badges

Carbide Bicycle lamp with locking screw reflector glass and burner. Has red and blue side light. Reflector glass missing. Inscribed "H Miller and Co Ltd, British Made, Birmingham" Switch and carbide filler on top.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

The Bruck Inhaler is a modification of the Clover Inhaler, designed by Lambert Bruck.Colour photograph of a Bruck inhaler lying on its side on a wooden table. The metal inhaler is oval shaped with one half made of glass, and also has a vertical crosspiece. Lying next to the inhaler is a face mask and a filler for measuring ether.anaesthetic equipment, bruck inhaler, ludwig bruck, inhaler, clover inhaler

Eppalock. Construction. Eppalock Project Main Bank. Lake consists of clay fill, Gravel Filter, Rock Filter, Basalt Filter, Stabilizing Fill. Full Supply Level RL637. Crest Length 2000 Feet, Maximum Height 150 Feet, Quantity Clay Fill 550 000 Ton, Quantity Gravel Filler 120000 Ton, Quantity Rock Filler 60 000 Ton, Quantity Basalt Rock Fill 250 000 Ton, Quantity Stabilizing Fill 150 000 Ton, Total Fill 1630 000 Ton. Markings: Eppalock Dam Observation Point Board.Agfacolorcivil engineering, water supply, eppalock

This doll was a highly treasured toy for a girl. The amount of wear and tear given to this doll indicates the great attachment to and comfort that its owner had with it. This doll could have been on a farm or cattle property in the Kiewa Valley rather than in the town.Due to the lack of social activities in the valley during the period, self amusement at home and limited interaction outside of the valley would have been this dolls prime role for its owner. The time between the two World Wars was one of recession and limited funds outside that required for survival. This is clearly demonstrated by the painted face and home made repairs to the body and limbs Porcelain/ceramic doll with painted face features. Half ceramic arms and legs. One leg missing.one arm loose Stitched dress with lace bodice hand made Body padded with cloth and fine wood shavings filler. Scarf lace weavedoll, porcelain, toy, lace, girls' play

Clothing. Beautiful cream lace in a deep curve (which possibly may have been the front or back) extending over the shoulders, into two long peaks- possibly a deep, V neckline. The lace has diamond shapes, woven in groups of four in a larger diamond shape, and also in a Maltese Cross type grouping. These appear to be ''fillers'' between circular shapes, 6 cm in diameter, of four-petalled flowers''. The outer edge has a scalloped effect, each with a Maltese Cross'' type filler. Possibly Brussells Lace. Two matching silk handkerchief Number 11414.30, No.1 of 6, No.2 of 6.costume accessories, female, lace collar

This car was introduced to replace the BA model Vauxhall Viva (Sept 68 - Oct 69) Total production numbers were 36561, including exports.Built and sold by Holden in Australia.Gold coloured 4 door sedan, black bumper strips low on both sides of the car, chrome door handles, mirror and bumper bars.Torona badge front quarter panel both left and right hand side, boot lid RHS checkered plate with the number 70 on, and below that the Torana name with SL .On LHS chrome petrol filler cap. Grille centre Holden emblem.vehicle, torana, holden

Kaolin is also known as china clay. This specimen came from Dunolly, Victoria and was donated to the Museum in 1868 as part of the Geological Survey of Victoria. This survey helped map and study the geology of Victoria. In Victoria, Kaolin is particularly used as a filler and coating material in paper manufacture. It can also be used in paints, ceramics, rubbers and plastics. There are many kaolin deposits in Victoria but many of these have been mined out and there is not much Kaolin left. Rocks that have a high amount of Kaolinite and it can be formed through the decomposition of other materials. There are two types of Kaolin; hard and soft kaolin. Soft kaolin's are coarse but have a soapy texture. It can also break easily. The hard kaolins have an earthly texture and are finer grained. This means that they are harder to break, unlike the soft kaolin. Hard kaolin's are formed by flocculation in salt water, a process that in basic terms, bonds particles together. Kaolin is a common material in Victoria and that is why it is significant. While this specimen was mined in Dunolly, Victoria Kaolin can also be found Pittong, Pakenham, Bulla, Hallam and Ballarat as well as many other places throughout Victoria. This specimen represents the presence of Kaolin deposits in this region of Australia. It is also significant because Kaolin has many uses and is largely beneficial to many manufacturing processes in Victoria. This specimen is part of a larger collection of geological and mineral specimens collected from around Australia (and some parts of the world) and donated to the Burke Museum between 1868-1880. A large percentage of these specimens were collected in Victoria as part of the Geological Survey of Victoria that begun in 1852 (in response to the Gold Rush) to study and map the geology of Victoria. Collecting geological specimens was an important part of mapping and understanding the scientific makeup of the earth. Many of these specimens were sent to research and collecting organisations across Australia, including the Burke Museum, to educate and encourage further study.Two pieces of Kaolinite mineral with shades of white and graygeological specimen, geology, geology collection, burke museum, beechworth, kaolin, china clay, dunolly, geological survey of victoria, kaolinite, victoria, mining, mining deposits, geology of victoria, australia, filler, coating material, paper manufacture, paint, ceramics, rubbers, plastics, decomposition, materials, soft kaolin, hard kaolin, flocculation, particles, salt water

WW2 Mills Bomb (Hand Grenade M36.WW2 Hand Grenade used by Australia and Commonwealth Countries.Segmented Cast Iron body with lever (now softened) and with Safety Pin and Ring. Firing Pin in position with heat softened firing pin spring. Non regulation filler screw fitted. The Grenade has been totally burnt out, there is no Base Plug and no Firing Pin/Fuse Holder assembly.The body is marked R B D which stands for R.B.Davies the lever is marked the same.