Hand Operated Rail Saw Out on the track in the old days, it was sometimes required to cut a piece of railway track. Before the use of generators and oxy cutting, the only way to do this was with a hand saw. This is the machine operated by two people, that would cut a piece of rail in half. And when the rail was cut, it was usually required to join it to another rail which required putting in 4 to 6 holes in the rail with a Hand Operated drill. Historic - Railways Permanent Way and Works - track equipment - Hand Operated Rail Saw Hand Operated Rail Saw made of cast metalpuffing billy, hand operated rail saw

This hand operated beater is the precursor to the electric beater. It has a hole in the top to add ingredients as they are beaten together. Pottery bowl made by Hoffman Australia.Bottom of cream coloured bowl: HOFFMAN 24 AUSTRALIAcooking, hand operated beater, hand operated mixer/blender

Built by the Buffalo Forge Company in New York, USA. It is of a typical hand operated design used in workshops.Historic - Industrial drill - typical hand operated design used in workshops.Steel - Black and red paintBuffalo Forge Company Drill Press No. 611puffing billy, drill press, hand tools, buffalo forge

Seed broadcaster were used to distribute seed across a small area or to fill in patches where seeding has been missed. This method does not ensure a uniform distribution of seeds unless the person using the machine walks at a very measured pace. It also requires a lot of time and manual labour if used in larger areas. It was most used for planting cover crops, grains, grasses and similar plants that do not need to be in neat rows. The hand-crank broadcast seed spreader was invented in 1868 by Samuel S. Speicher (aka. Spyker) in Indiana, USA. By 1955 new developments included the invention of a seed broadcaster on wheels and these smaller spreaders started to disappear.This item is representative of agricultural machinery used on a local, national and international level in the late 19th and early 20th century.A metal hand seed broadcaster. A hopper at the top was the receptacle for seed. The wheel with a handle on the side when turned drives the cogs attached to an axle. This action rotates the attached spindle with blades to propel seed out the front of the broadcaster. The broadcaster would have had a shoulder strap and a bag of seed would have been added to the hopper and secured with twine through the holes around the top.agricultural tools, farm machinery

The John E. Hand & Sons Company was founded in Philadelphia in 1873, quickly gaining a reputation as competent manufacturers of nautical instruments and compass adjusters. In fact, John Enos Hand, the company founder, is recognised as the first man in America to adjust a compass aboard an iron ship. The Hand Company built navigational equipment for all varieties of floating vessels, and operated a chain of retail outlets with “service stations” in numerous port cities, including Baltimore and New Orleans, until 1956. Service stations sold Hand instruments as well as other nautical paraphernalia and provided compass adjusting services. Additionally, John E Hand and his two sons, John L Hand and Bartram Hand, were inventors in their own right who patented design improvements for numerous instruments that were employed in the company’s work. Commercial and private contracts dominated the firm’s business until the late 1930s when the United States military began preparations for World War II. Although the Hand Company never completely abandoned its involvement with private industry, after World War II, military contracts monopolised their business. The Company obtained contracts with the Navy, Coast Guard and Marines to develop new instruments, and to build military-engineered nautical equipment. Of note are the wrist compass, developed for the Navy beginning in the 1950s, and the Mark VII Model 5 Navy Standard Binnacle. Although it moved numerous times, the Hand Company headquarters and factory remained in the Delaware Valley, occupying several buildings in Philadelphia and southern New Jersey. Maintaining its central office in Philadelphia well into the 1900s, the factory was moved to Atco, New Jersey around the turn of the twentieth century and subsequently to Haddon field, New Jersey. It moved one last time in the 1960s to Cherry Hill, New Jersey. In 1997, California-based Sunset Cliffs Merchandising Corporation purchased the Hand Company and all its assets for $100,000. "HAND" brand taffrail log by John F. Hand and Sons Co. Register is enclosed in log, has a glass front and 3 dials on an enameled surface, the first dial registers the miles up to 100, the second registers the units up to 10 mile, the third registers quarters of a mile. The item is rocket shaped with a three blade rotor and a rope ring attachment at one end; the rotor will spin when a rope is attached, allowing the apparatus dials to measure the ship's speed when it is dragged behind a ship. Diagram of the 'Hand' trademark with a compass card in the middle, inscription reads "John F Hand and Sons Co" and "PHILA-BALTO" ( Abbreviation for: Philadelphia / Baltimore) flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, bartram hand, john enos hand, john f. hand and sons co, john l hand, john hand & sons instrument makers, john hand & sons of philadelphia, marine instrument, marine service station, mechanical ship log, nautical instrument, nautical navigation, navigational equipment, scientific instrument, ship log, ship log register, ship’s speed, sunset cliffs merchandising corporation, speed log, rocket log, harpoon log, taffrail log, taff rail log

Small sewing machine for a toy or travel kit with clamp to attach to table/bench edge

Food/Personal items sent by family to troops serving overseas. Hand made cotton bags were completely sealed. Overseas address was simply made out to "Abroad"Food, personal items and presents were sent by the family or friends to serving troops overseas. Canvas/Cotton bag hand sown together with black cotton.VX 18968 Dvr N.E. Morris A Section no1 Echelon 7th Division A A S C Supply Column 2nd AIF Abroad From M. L. Morris Wilson St Cheltenham Melbourne Australia (Identical information Written on both sides of the bag.parcel present cotton bag vx 18968 morris 2aif 7 division cheltenham

This dress is hand made possibly by a mother for her daughters. It is hand and machine stitched. This style of dress would have been worn for special occasions, eg going to church or special outings.This item is very significant for the following reasons. Historic and social - it shows what little girls wore during the early 1900's of the Kiewa Valley. It also shows fashion of the times and how these styles of dresses were made. All of which is valuable for research on these topics. There are only two of these dresses in the collection of the KVSH, and therefore would be very rare. The condition is good enough to display, therefore it has good interpretive capacity.Brown Cotton Dress. Top and sleeves are lined in calico. Home made, with manual machine stitches and some hand sewing. The dress has a high round neck and long sleeves. There is a band around the waist to which a gathered skirt it attached with hand stitching. Two different shades of brown are used on this dress. Back opens with 8 hooks. Water stains on dresschild, homemade, dress, girl, kiewa-valley

Cast brass and machined handle used on tramcars fitted with air operated sliding doors.trams, tramways, sliding door tramcars, tramcar component, preston workshops

Seven page, foolscap document printed by the Gestetner stencil process on fawn paper, titled "Particulars of Streets Traversed by Trams and Buses on routes operated by the Melbourne and Metropolitan Tramways Board". Was stapled in the top left hand corner, unstapled for scanning purposes. Dated October 1950. Listed in route name alphabetical order. At the time, bus routes were not given numbers.trams, tramways, mmtb, ptc, buses, route numbers, routes

Hand Rail Drill Out on the track in the old days, it was sometimes required to drill some holes in a piece of rail so that two rails may be joined together by a metal joiner – called a fishplate. Before the use of generators and oxy cutting, the only way to do this was with a hand drill. This is the machine operated by two people, that would drill a hole in the rail. With two to three holes to be drilled in each rail end (ie 4 or 6 holes), it was a tiring, back breaking job. And then there was usually the rail on the other side of the track to be done! Historic - Railways Permanent Way and Works - track equipment - Hand Rail DrillHand Rail Drill made of metal puffing billy, hand rail drill

Catalogue - prepared for J. Buck. Established 1759 Hand Tool Preservation Association of Australia Inc. Tools and Machines for Engineers and Woodworkers.Grey heavy Paper cover Black writing and border Catalogue of Tools and Machines 248 pages - Measurements, prices and catalogue Nos of Tools Printed in 1913 - supplied by Frank Ham, HT-PAA Printed in August 2003 by Hand Tools Preservation Association of Australia Incj. buck - established 1759, tools and machines for engineers and woodworkers

Donated to the Camberwell City RSL by Bruce Ruxton in 1995Hand embroidered 'Ode to the Fallen'Hand embroidered by Sister Ailsa Storrer just before she died on the 10 June 1995

Ticket - printed on card - for the Zoo Horse Tram operated by the TMSV, with an image of the Zoo horse tram at the Royal Park gates, and the story of the tram on the rear along with conditions of travel. No. 7989. See Reg Item 5993 for a copy print of the original image.On rear in ink "My father took me on this tram - 1922" and "Edna Caddell Leckie"trams, tramways, tickets, tmsv, zoo tram, royal park

This style of geared drill was commonly referred to as an egg-beater drill and was first patented in 1838. During the late 19th century these drills became more common due to the development of mass production. Users also began to mount the drill onto a frame. This allowed greater control over the drill and removed the need to be holding it in both hands. This gave the operater greater control over the item to be drilled. The drill could be easily removed when required. This item is an example of a domestic woodworking tool commonly used before the widespread use of power tools. The construction of the basic wooden frame also demonstrates the ingenuity of early pioneers and tradesmen in adapting tools to suit their own needs.A metal hand drill which has been mounted on to an improvised wooden stand. hand tools, mass production, egg beater drills

Enamel sign, black capital letters and lines on white background, with words in capital letters "Weather Blinds must not be operated by Passengers". Sign has a black enamel backing, with marks from the enamelling process and two holes centrally at either end. Two copies held.trams, tramways, signs, sec

An ergonomic keyboard designed for people who need to type with one hand. Typing speeds of 85 WPM are possible with this keyboard. The layout of the keyboard is designed for one handed users to type quickly and efficiently.The shape allows the natural movement of the hand. The company was formed in 1977 and this model was created in 1981. Single handed keyboard with grey and yellow buttons and power cord. Maltronkeyboard, maltron, disability, one handed keyboard, impaired aid, electronic

Hand forged metal spike found along Plenty River.Hand forged metal spike. Some rust.

Stawell Technical School Workshops 1923-1924. Student at work with foot operated potters lathe.stawell education

Report - carbon copy of 2 typed foolscap yellow sheets, titled "MMTB Passenger Vehicles Operated", dated 9/12/1959 from D. H. Eakins, Chief Engineer to the Chairman. Lists each class of tram and buses, number used in service, maximum demand, one or two men, and the number of maintenance staff employed to service the fleet at depots and workshops - 1060.trams, tramways, employment, workshops, depots, buses, trams, maintenance

This item is hand made possible by a mother for her daughters. It is hand and machine stitched. This style of aprons / pinafore is attached to the two brown dresses that are also in the collection. This item is very significant for the following reasons. Historic and social - it shows what little girls wore during the early 1900's of the Kiewa Valley. It also shows fashion of the times and how these styles of aprons were made. All which is valuable for research on these topics. There are only a few of these aprons in the collection of the KVSH, and therefore would be very rare. The condition is good enough to display, therefore it has good interpretive capacity.Girls apron or pinafore. White linen with crocheted lace around the edge which is continuous around the skirt, sleeve and neck. The shoulders flaps appears that they should be pinned to the dress beneath, and pinned together at the back of the waist. The apron is manual machine stitchedclothing, girls, children, pinafore, apron, kiewa-valley, alpine-shire

Bricks from "Willis Vale' home of the Partington family of Greensborough. Built in 1840, Willis Vale was owned by the Partington family from 1878 to 1947. It was a 2 storey house overlooking the Plenty River and set in 150 acres of farmland. The Partingtons moved out in 1947 and the house was vandalised shortly after. It was destroyed by fire in the 1960s.The bricks are a link to pioneer homes and farms in the area.Hand made clay bricks, light red in colour. All faces are flat.. One brick is chipped. Accompanying note: Hand made bricks from Partington house in Greensborough. Donated by Alan Partington.willis vale, partington family, greensborough, alan partington, bricks

Two M26 hand grenades were issued to each Patrol Member.A replica hand grenade olive drab in colour, with firing pin and ring intact. m26 hand grenade, sas, replica

hand written diary from Able Seaman Josep Frederick Thomas Chapman of his account of activity in the Dardenelles in WW1. Includes drawings, diary entries and details of active campaign in the Dardenelles in WW1.CD of hand written diary from WW1 landing at GallipoliJ26729 Able Seaman CHAPMAN, Joseph Frederick Thomas

Hand-painted hand mirrors featuring portraits gained significant popularity during the Victorian era. They were originally a feature of an upper class lady's boudoir. As production techniques were streamlined and allowed for mass production, they became a common feature in most households.This item is significant because it is representative of personal items used in the home from the Victorian era onwards.A small hand mirror featuring a painting of a young woman on the back of the mirror and a man on the handle.personal toiletry items, vintage mirror