A handmade wood travel trunk, with internal cupboard fastened by wing clips, side brass handles, brass hinges and a central brass lock with latch for padlock Early settlers used these handmade trunks to bring their worldly goods to the new Settlements in Australia c1850A typical travel trunk used by pioneer settlers as they traveled on sailing ships from Europe to Australia c 1852A Handmade wood Travel Trunk , with internal cupboard, brass handles, lock and hinges c 1860NILpioneers, moorabbin shire, dendy's special survey 1842 brighto, dendy henry, were j.b., moorabbin roads board, market gardeners, early settlers, bent thomas, sailing ships, emigration to melbourne 1850, methodist church, henry box, holloway josiah, box willian, poultry farmers, flower farms, orchards

These handles were for fitting to Kit bags otherwise known as sausage bags.Handle, “U” shape, brass, one side is hinged to swing to other side which has a hole so a lock can be attached.handles brass, kit bags

Used at Prince Regent Theatre in Lakes Entrance from 1926 to 1975HistoricalDisplay of door handles and finger plates on plaqueperforming arts, cinema

Item was used in conjunction with Cat No 501.Detatchable handle used to convert kit bag from being shoulder carried to hand carried. Made of brass, one curved section and a straight section which threaded through the fabric of the bag.military-equipment, brass handles, kit bags

Spraying units were manufactured in Australia by REGA Products Ltd. from 1926. REGA established themselves as leaders in the production of agricultural and horticultural spraying machines, including smaller knapsacks.Fire knapsack with carry handle Brass pump handle and adjustable nozzle attached.forests commission victoria (fcv), bushfire, planned burning, fire pump

wooden handle brass fittings small sharpening knives

Handle brass with square end and square section punched out.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, handle brass, handle

Japanese sword with aluminium handle, brass fittings metal scabbard.5 Japanese symbols on blade.

The Minutes of the Kew Historical Society record that in the year 2000, the Society paid for a Town Crier's outfit. This outfit was later used in public events relating to fundraising for the restoration of the Kew Court House at 188 High Street, Kew. A member, usually Philip Slobom, dressed as the Town Crier, used this bell to draw attention to the campaign. Wood handled, brass handbell. Probable reproduction of an original item.FATIMA CONVENT PARRAMATTA 1896hand bells, fatima convent, parramatta (nsw)

Steel blade with plastic and wood handle. Brass hand guard.

This file would be used by a tradesperson or home handyman to smooth the edges of the wooden piece he or she was working on. The surfaces of the file would be of different abrasiveness to suit different stages of the job. A file would be part of a woodworker's tool kit.The design of a file hasn't altered significantly over the last century. This file is an example of an early 20th century file but would be at home in the workshop today.Large file with wooden handle. Brass collar sits between handle and file.flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, file, woodworking, carpentry, tool, trade

Thought to be souvenir from Middle EastBone handle, brass fittings middle eastern dagger. Single edge blade.

Chisel with wooden handle & brass ferrule. 215mmL x 55mmW blade.'F' stamped on handle & 'Ward' stamped on blade.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, chisel

Used by Mrs Elsie Singleton (nee Waldron) in her home at Wedderburn. The machine was invented by Samuel Osmond. The first half-yearly report of the Osmond Little Marvel Washing Machine Company was noted in the Adelaide Advertiser on 2 December 1903 when HG Prince presided. The number of directors was later reduced to 3. Osmond Little Marvel galvanised tin hand washing machine with six funnels attached to a frame and then a handle; brass name plate.Osmond Little Marvel washing machine No.3820 Patentedsamuel osmond, elsie singleton (née waldron)' wedderburn

Try Square metal blade with wooden handle. Brass inlay design on handle has "CK" stamped on it. 355mm x 160mm flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Japanese short sword. Aluminium handle brass tsuba with Japanese (4) symbols with dragon.Scabbard is wood with aluminium outer, cloth binding.

Roll of surveyors metal tape with brass handle stamped '100 ft'. Tape marked in 1 inch, 1 foot and 10 foot intervals. Held in roll with leather tie. End broken off (approx 5 feet missing).Brass handle one end only, stamped 100 ft. Tape stamped 'Chesterman Sheffield England'.surveying tape, scientific instrument

Door locking mechanism with separate knob. Lock is steel, handle brass. Large keyhole to right of handle, three small round holes on face for attaching to door.John Graham & Son' embossed on quatrefoil plaquebuildings, fittings, lock, door, john graham, steel, brass, handle

Ballarat School of Mine had a boot making department. This one of the tools that would have been usedBlade tool - wooden handles and brass blade section"EDMUNDSON - LANCASTER" engraved on blade section "LEITCH" on both wooden handles tool, leather, boot making, ballarat school of mines, skiver, edmundson, lancaster

A tool for holding or pulling something, made of two curved metal bars that move against each other so that when the handles are pushed together the other ends close tightly.Steel Bulldog pincer with wooden handle and brass ring.carpenters pincers, carpentry tools

The Marlo area has always been a destination for fishermen. This item was probably used in the first half of the 20th century in Marlo.A canvas fishing bag with rope handles - 1423.1. The fishing reel is a wooden reel with a wooden handle,brass star shaped back ratchet and lever. It has a nylon line.fishing-reel recreation

An Awl is used to make indentations in wood or other materials in order to ease the insertion of a nail or screw. The blade is placed across the fibers of the wood, cutting them when pressure is applied. The Awl is then twisted through 90 degrees which displaces the fibers creating a hole. This then gives a start to the nail or screw being inserted into the work piece. There is a difference between an Awl and a Bradawl, the Awl is a small hand-held tool with a sharpened point and a Bradawl is similar but is flattened at its tip to produce a sharp chisel edge.An everyday tool used in carpentry, the subject item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as believed to have been produced during the 20th century.Awl with wooden handle with brass ferrule & steel pointed shaftStamped on handle J McArthur (owner)flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, awl, j mcarthur, carpenders tools, woodworking tools, nail starter

Souvenir of Middle East thought to have been brought home by soldier returning to AustraliaCurved dagger with bone handle with brass scabbard. Made in Middle East

French 1831 Pattern Artillery Short Sword A French 1831 pattern brass handle dismounted artillery mans short sword, marked Talabotts Paris with black leather brass mounted scabbard. Blade, length 49cm, total length 64cm The French 1816-1831 sword was based on ancient sculptural depictions of the Roman gladius, the standard sword of the Roman legionaries. Both sword and scabbard are in very good condition.Short Sword Brass Handle with 26 cm Blade French 1831 Pattern Artillery. Based on ancient sculptural depictions of the Roman gladius, the standard sword of the Roman legionaries.Stamped number on center of the guard of the hilt is 770. There is some marks also on center of the guard on the opposite side but not readable.french short sword 1831, brass handle, metal blade