Leather Splitter Used for splicing leather drive beltsHistoric - Leather working Equipment - Leather SplitterLeather belt splicer - Leather splicer made of Timber base with a steel wedge and leather lead in puffing billy, leather drive belt, splicer

Clothing. Ladies red leather belt with oval shaped leather covered buckle. Old box 573.costume accessories, female, ladies red leather belt

This belt belonged to a WW1 Australian Anzac who most probably, because of the buttons and badges, served on the Western Front. Records destroyed in 1969 bush fires at Lara means we are unable to determine who owned this in the RSL. The belts is called a 'stable belt' and the one you have acquired is an early example with a leather pocket. It became common in WW1 for both, leather belts (especially that from the 1903 bandolier equipment as worn by those in the Boer War), and stable belts to be used to hold badges collected from fellow soldiers and for that reason it was often known as a 'souvenir belt'. The evolution of the stable belt: It seems that stable belts began to become popular across the Army as a whole around the turn of the 20th century, although they probably originated with the cavalry a little earlier sometime in the 1880s/1890s. All units at that time had horses on their establishment and those soldiers told off to attend them reported for Stable Parade in Stable Dress which consisted of very high waisted and pocket less breeches, or trousers, held up by braces and collarless, woollen flannel shirts with sleeves rolled up. This was to facilitate the rigorous physical effort and flexibility of movement necessary for mucking out and grooming. Braces at that time had no elastic as rubber was expensive, they were made of cotton with no 'give' whatsoever and so soldiers commonly allowed the braces to flop down from the waist so that they could bend over freely. For trousers that fitted loosely (due to the high waist) this meant that they tended to slip down and at first soldiers cinched them in with leather belts. Later on the regimental saddlers began to make belts from the same, plain canvas or wool strapping used for the horses Surcingle and utilising the same double leather strap and buckle arrangement for security (if one strap broke the other would hold and prevent the saddle from coming unseated). One particular feature of these early stable belts was a sewn on (or in) pocket, secured by a stud or clip, within which loose change could be kept, or a pocket watch, as there were no pockets in the breeches. As you might imagine these became very popular as the pocket was useful and the extra breadth afforded by the canvas strapping made them very comfortable. Around about the turn of the 20th century it began to be popular for officers to wear neckties in regimental colours both for sport and less formal, country dress. This habit probably began with the Queens Household troops and Line Cavalry, but quickly spread throughout the Army and it appears as if this use of regimental colours spread to the canvas or wool strapping used to make stable belts. For this reason the stable belts invariably followed the same colour scheme (but not always the same pattern arrangement) of regimental neck ties. This belt is an example of what Australian troops collected when on the Western Front during WW1 and when on leave.Leather Belt with 31 Badges and Buttons from WW1 attachedSee Mediaww1, world war 1, australian army, badges, button, belt, stable belt

Brown leather belt with brass clip clasp and brass adjustments, brown stitching that has faded.Nilleather, metal, belt

Dark brown leather belt with large rusted buckle. Belt is made up of three bits of leather, sewn together.Nilleather, metal, belt

A brown leather Army belt with shoulder strap attached and a metal claspL.Gibsonbelt, army, clothing

Clothing. Navy blue leather: 3.5 cm by 106 cms. Silver metal buckle 5.5 cm by 4.0 cm. One .9 cm wide leather loop beside buckle. Five round holes to fasten belt. Three additional holes have been added to further tighten belt, or to accommodate a new wearer.MADE IN AUSTRALIA BY DOMO P/L VIC. 1172 STEER HIDE 95 cm 38''.costume accessories, male, leather belt for band uniform

used between 1962 - 1975 ceremonial brown leather belt markings say LT. VE. LEHMAN 105 LOCH***ST

Leather Belt part of Sam Brownuniform, ww1, army

Used to carry knife manufactured by Holden and FrostManufactured by Holden and FrostBrown leather belt mounted knife holderleather, knife holder

Leather belt with brass buckles, includes waist and shoulder belt.Nil

The belt was gifted to Mr. Doug Paxton, of Neale Street, Bendigo c.1951. The donor was a "soldier": who billeted with the Paxton family. Correct date and soldier's name unknown.This is a leather belt, tan coloured. It is 42mm wide and has a brass buckle with one claw. The belt tongue has six holes. At the rear of the belt are two more holes. A larger section of leather is mounted behind the brass buckle.Belt - Printed on belt is an oval and inside the oval is stamped "Genuine Bridie Cowhide". On the left side of the oval are the numbers “217G”. On the right side of the oval are the numbers “36”. On the rear of the buckle, "Solid Brass" is stamped.uniform, leather belt and buckle, soldiers billet

White leather belt with silver gilt buckle, attached purse/pouch. Buckle shows Queens crown surrounded by wording Victoria Aut Pace Aut Bello which translates to Either Peace or War. Printed in ink on inside the name Crawford.costume, male ceremonial, belt

In 1941,as part of the war effort, the Mayor, Councillors and Citizens of Prahran provided over 2000 money belts for soldiers and sailors leaving Prahran for active service overseas. These were included in parcels of comforts made up and presented by the Prahran Patriotic Society. Brown leather belt with four pockets with press down stud closings, possibly for money, on the inside of belt.On the inside of belt, printed in gold "With Best Wishes from the Mayor, Councillors & Citzens of the City of Prahran 1941"money belt, world war 2, prahran patriotic society

Leather belt with souvenir badges from L to R: AMF collar badge, brass plate with crown and bird badges attached, brass map of Australia enclosed by a serrated circle, Australian Red Cross Society button, silver boomerang with brass map of Australia, brass "Australia" shoulder badge with circular aluminium(?) disc above, US Army 147th Field Artillery Regiment Unit Crest, crossed cannons with 147 above, brass tab, musicians badge, AMF collar badge, Major's crown, laurel leaves with what appears to be TCB in script above, crossed rifles, star with what appears to be a lotus flower (Japanese?), AMF button, Major's crown, what appears to be a red S inside a white circle.Circular aluminium disc has Pte M Cain VX6341 AIF faintly engraved on it.

Leather pouch for inclusion on belt issued to soldiersBrown leather pouch with two belt keepers on the back. Has large yellowing stitching.On back has C.H.F. ^ engraved into the leatherleather pouch, pouch, leather, map case, belt pouch

Leather cartridge belt with brass buckle. Designed to carry shotgun shells.

Military issue waist belt with four pockets to carry money or other sundry items Manufactured by HOLDEN Leather waist belt with four pockets for carrying other sundry small items Nilmilitary, money belt

Leather Belt Pouch

Used by military persons to carry ammunition pouches, either around waist or over shoulderManufactured and distributed by Holden and FrostTan leather belt, holes both ends and in the middle brass adjustment tool in centre with holesHolden and Frost 1916,military, leather, belt

Black leather belt with silver coloured buckle, six holes. Matching jacket 11400.257 & trousers 11400.258.costume accessories, male, men's leather belt

1. Leather belt, brown colour, brass coloured metal buckle with brown leather sliding keeper, brass coloured 'd' rings attached to side of belt. 2. Leather belt, brown colour, brass coloured metal buckle with brown leather sliding keeper.Nilleather belt, uniform, sam browne

Belt used on horses to attach reins and strapping for use on carts and buggiesMade and sold by Holden and FrostBrown leather belt that fits around horses belly two metal rings for reins and two brackets for strappingPattern etched on front of beltleather, belt, equestrian

17th Light Horse Regiment, Bendigo possibly.Leather belt, Sam Browne, dark brown, stitched metal, brass buckles (double fastener) & loops, 1 length of leather hanging from belt.“Hector E Baston”costume accessories - belt accessories, trades-leatherworking, passchendaele barracks trust

The Samuel Browne belt is named after Sir Samuel James Browne VC. In 1858, Browne lost his left arm in battle (as a result of a sword cut) and as the dress regulations of his regiment required officers to wear their waist belts under their tunics, Browne found this ungainly and devised an external belt supported on the left-hand (sword) side by a shoulder strap. The belt had two shoulder straps when a holster was worn. In the Australian Army, a brown leather version is worn on ceremonial occasions by officers and Warrant Officers Class One of all corps, except those who wear silver dress embellishments (Armoured, Aviation and Nursing Corps). These members wear a black Sam Browne belt. Wide brown pattern stitched brown leather belt with adustable shoulder strap, brass buckle and brass loop fittings (4 at the top and 2 at the bottom) attached to the belt by stitched leather straps.Nonesam browne, belt, clothing

Belt worn either around the waist or across body, to carry ammunition pouchesas manufactured by Holden and Frost Brown leather strap with holes each end, brass buckle midwaymilitary, belt, ammunition

For use by soldiers for carrying personal objectsManufactured and sold by Holden and Frost Light brown coloured leather pouch with rear fastening cover, strap inside for holding contents firmly Brass loop and rivets on back.Holden and Frost 1916military, belt pouch