Standard pattern WW2 steel helmet as worn by Australian forces from 1940 until 1950s. Replaced by US Pattern M1 steel helmet.Completely original WW2 Australian helmet Australian MkII raw edge steel helmet with MkII linseed oil fabric liner. Webbing chinstrap with steel springs. Moulded rubber crown pad. MkIII chinstrap securing lugs. Exterior painted chocolate brown.Lugs dated 1942steel helmet

This item is a WW1 era German Luger Stock which would have most likely been used with a 9 inch barrel artillery Luger to assist with aiming a shot. This would have been attached to the wearer's belt.Wooden Stock. Length 36cm. Width butt 11, 20 cm strap wrapped around the end, width 3cm. held in by 4 screws 1 on stud to hold it in place. Cut through on on side other side . Width 4cm. Strap on the back holster for the muzzle. width strap 2cm Length 23cm held in place screw 1.5cm 3 rivots behind screw. ww1, first world war, 1914-1918, the great war, ww one, world war one, world war 1, luger, luger stock, stock, germany

Hughy Pippin 1895 C Coy 38th Batt AIF. As the holster is engraved with Jack Grintons name, No 1043 they were good friends during and after the war. It is believed that Jack gave Hughy a holster and Luger pistol as he had 2 at wars end. The "St Quentin" on the holster is debatable. Refer 1052 medals, 1513.4 documents. Refer Cat No 1280 re Jack Grinton.1 Photo of a German Luger pistol housed in .2. Under photo "The pistol that was with the leather pouch." .2 German Luger holster, heavy leather, intact, has cleaning rod attached as part of the holster. On rear is scratched "1043 JW Grinton, near St Quentin 1918."photography-photographs, military equipment-holsters, handcrafts-leatherwork, metalcraft

Provided by the MMTB to its Depot Foreman as a pass for free travel on its trams and for identification. The two steel lugs would have allowed a leather strap to be fitted to the badge and clipped to a uniform or jacket. See item 398 for another example.Demonstrates a travel pass issued to Depot Foreman for free travel.Stamped metal badge, "MMTB Depot Foreman" pass, round with two metal lugs on rear for sewing onto a jacket or another uniform item as a means of identification. Has the number "3" stamped into bottom of badge. Silver coloured with black enamel letters. On rear has the imprint of "Stokes & Sons Melb" Second copy - No. "6" tramways, trams, badges, tickets, travel pass, employees, passes, mmtb, depot foreman

brass insignia badgeRAF laurel wreath crown missing one lug missing

Lugged Joining Shackle. 2510.1 is a Tapered pin, 2510.2 is a bolt and 2510.3 is a lug shackleflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Hat badge with lugs of Light Horse.Australian Commonwealth Military Force

Items belonging to Horace Eli Hambly No 794 AIF. Refer 2325.2 for his service history. .1) Ribbon for medal "War Medal" 1914 - 1918 .2) Ribbon for medal "1914 - 1915 Star". .3) Ribbon for medal "Victory Medal 1914 - 1919 .4) Badge, brass, figure "3" with lugs and pin. .5) Badge, brass, figure "3" with lugs and pin. .6) Badge, brass, figure "3" with lugs and pin .7) Badge, brass, figure "4" with lugs and pin .8) Badge, brass, figure "4" with lugs and pinbadges, awards, units

Items in the collection re John D Gardiner No 2832, refer Cat No 5892.2 for his service history..1) Badge brass with the letters "R E", two lugs on the rear. .2) Badge brass with the letters "N F", two lugs on the rear.badges, uniform

As used for the cleaning, maintenance and polishing of leather goods.Imported and retailed by Holden and FrostSquat tin can with opening lug on side.Propert's Leather and saddle soap with sketch of horse and rider jumping fence as logo.leather, soap, polish

As used for the cleaning and maintenance of all leather goodsAs imported and retailed by Holden and frost Circa 1900Squat tin can with opening lug on side.Propert's Leather and Saddle soap with drawing of horse and rider jumping fence as logoleather, soap, polish

Items issued to John. D. Gardiner No 2832, refer Cat No 5892.2 for his service details..1) .2) "Australia" shoulder badges brass curved shape with two lugs on rear. .3) Rising sun lapel badge brass, no lugs on rear..3) "Australian Commonwealth Military Forces"badges, rising sun, uniform

Items souvenired by Edwin James Jones No 3511 AIF. Refer 1367.5 for his service history..1) Badge, Brass, curved with letters " NZR" Lugs on rear with one clip .2) Badge, brass, curved with letters " NZRB" Lugs on rear with one clipnumismatics - badges, military history - newzealand, metalcraft - brassware

Item souvenired by Edwin James Jones No 3511 AIF. Refer 1367.5 for his service history.BADGE, Brass with the letters " SASC”, Lugs on rear with one pinnumismatics - badges, military history - army, metalcraft - brassware, jones

Collar Badge, Army Metal dull, one, missing lug.badge/buttons, army

Items re Frederick.George East VX64901. Refer 537 medals re WW1and WW11 service history also 517, 538.2..1) - .6) Shoulder Rank badges, officers, Square in shape , raised with 2 lugs for uniform attachment. .7) "Australia" Shoulder badge, curved , blackened brass, lugs on rear for uniform attachment.numismatics - badges, uniforms - army, shoulder, rank

Derrick Spider Band, brass, round with 4 lugs for attaching stays. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Owned by Martin Balsarini, a resident of Chiltern Valley, for use in WW1. Service Number 1682. Martin Balsarini enlisted on the 21/7/1915 and served with the 4th Australian Lighthorse, AIF. He participated in what is known as the last great cavalry charge, the charge of the 4th Australian Lighthorse at Beersheba on the 31/10/1917. WW1 owned by Chiltern Valley Resident Soldier Martin Balsarini who was in the Charge of the Lighthorse at Beersheba with the 4th Australian Lighthorse on the 31/10/1917. Brown Leather Luger Revolver Case for attachment to belts webbing WW1. 1. Etched into the inside leather cover : J. A. Stanien... 1917 Berlin. 2. Stamped into the inside leather case black ink in Black Markings : B.A.X1 ww1, revolver case, balsarini, chiltern., martin balsarini

The badges are of unknown origin at this point. Items in the collection re John D Gardiner No 2832, refer Cat No 5892.2 for his service details..1) .2) Two badges pressed brass, one lug on rear of each.badges, british

Item relates to Gilbert Turner MM, No 1410 45th Batt AIF. Refer Cat No 1038 for his service details."AUSTRALIA" shoulder badge, curved shape, blackened brass with two lugs on rear.numismatics-badges-military, shoulder uniform, turner, australia

Items in collection re John D Gardiner No 2832, refer Cat No 5892.2 for his service details..1) Shoulder badges brass curved shape with raised letters "CANADA", two lugs on rear. .2) .3) Badges Collar pressed brass, central crown surrounded by floral arrangement with "CANADA" under, two lugs on rear.On all, "CANADA"badges, canada, soulder, collar

Belonged to Capt Warick Rosenthal No TX6321 AAMC. Refer 622.3, 775..1) Rising Sun Lapel Badge, pressed blackened brass, Rising Sun with Crown in the Centre, scroll underneath with lettering "Australian Commonwealth Military Forces" two lugs on rear and pin. .2) As above minus two lugs.uniform badges, lapel rising sun

Refer Cat No 4768.4Badge, brass curved shape “AUSTRALIA”, rear has two lugs for uniform attachment“AUSTRALIAbadges, australia, lapel

Belonged to David Andrew No 400247 RAAF, KIA 5.4.43. Refer 2048, 2085, 2088.Badge, "AUSTRALIA", blackened brass, curved shape with lugs and pins on rear for uniform attachment.badges, military, brassware

This badge was apparently made after WW2 and used on surplus Slouch hats being sold to the public. Item in the collection re John D Gardiner No 2832, refer Cat No 5892.2 for his service details.Badge cast gold colour with map of Australia centre with "Australia" under, two lugs on rear.badges, hats