This mantle clock was given to Norman Nobelius by his parents Rupert and Flo Nobelius on the occasion of his marriage to Frances Ayers in 1947 and was subsequently inherited by their daughter, Pauline. Rupert was the son of Carl Axel Nobelius, the famous Emerald horticulturalist. This clock was a gift from the son of the famous Emerald horticulturalist, Carl Axel Nobelius.Ansonia mantle clock with ornate oak case with metal pendulum and a brass key c1940s. Round metal face with Roman numerals. The clock was cleaned and the silver work on the door replaced in recent years.Below clock face: "ANSONIA CLOCK COMPANY"emerald, c. a. nobelius & sons, 1940s, ansonia clock

Small black slate and marble mantle clock with single train movement,pendelum, round white enamel dial with black numerals and hands, brass bezel with bevel edged glass, case of black slate with red marble decoration on front. Donated by Mrs A. Gill, Somerville Street, Bendigo.on movement E793 46horology, clocks, mantle

Ornate Mantle Clock stawell

Black wooden mantle clock with pendulum bob, made in U.S.A. by the Sessions Clock Company, mounted on ornate metal feet with metal handles on each end, four faux marble columns in green with metal tops & bases. Round gold dial with black numerals and hands, brass bezel with flat glass. 8 day time and strike, chiming the hours on a gong and half hour on a bell. Original paper label on back with manufacturers details and operating instructions.The Sessions Clock Cohorology, clocks, mantle

Object. Black wooden mantle clock with pendulum bob made in U.S.A by the Sessions Clock Company, mounted on ornate metal feet, and decorated with four columns supporting Gothic arches, with torch like ornamentation between them and an ornate handle on each end. Round white enamel dial with black numerals & hands, a brass bezel with convex glass. 8 day running with gong strike on hour & half hour. Brass plaque on front reads presented to Mr.P.Cooper by his fellow employees of the Water Commission Bendigo on his retirement 30.6.1926.Sessions Made in U.S.Ahorology, clocks, mantle

Mantle Clock (Ron Maddocks Best & Fairest 1955 Stawell Football Club)stawell

This clock originally belonged to Mrs Helen Cross of Tatura. It may have been a wedding present in 1880. It was handed down to her daughter Mrs W Dick (1933) of Harston, then to her daughter Mrs Ruby Williams (1952) of Tatura and then to her son Brian Williams in 1997. Mrs Cross was formally Miss Brideson of Rushworth. China Mantle Clock with brass face. Decorative edging. Olive Green glaze with pink trim. Floral decorations on front.128 on baseharston, tatura, rushworth, clock

Portland Post Office Clock. Case is apparently new.Large mantle clock made from dark wood. Front door has a large glass pane with roman numerals in gold affixed to interior of glass. Brass arms and some of workings of clock visible through the door.Front: PORTLAND ROTARY CLUB INC. This original Portland Post Office clock, dated 1882, was fully restored and presented to the Portland City Council by Rotarian Norm Middleton on 20 September 1993. (metal engraved plaque affixed to front). Back: (unknown)portland rotary club, portland post office, mantel clock, horology

Purchased in Bendigo in 1973. Previous history unknown. Provided with laminated account of Sessions clock Co history. Mantle clock black wooden casing with embossed "flourishes" on front base and around the clock face. Fancy gold painted face featuring numbers. Black hands. Detachable back reveals the mechanism. Has key attached inside . In working orderMade in USA on face. Labelled on back, eight day, half hour, cathedral gong, turn back. The Sessions Clock Co successors to the E. N. Welch MFG Co, Forrestville, Conn, USA

This clock was brought out to Australia in 1849. it was then bought in Ballarat by Samuel Richardson in 1865 and brought to Orbost when he settled there. The Richardson family was one of the very early settler families to establish themselves in the Orbost district. Samuel Richardson was builder of the Paddle Steamer Curlip. This clock may have been used as a marine clock. The Richardson family was one of the very early settler families to establish themselves in the Orbost district. Samuel Richardson was builder of the Paddle Steamer Curlip. A wooden mantle clock in a rectangular cabinet. It has pendulum striking. The face has blue and gold decorations. the numerals are Roman. The face surround is white and the numerals black.There is a glass door with red,blue and green decorations on the lower quarter. There is a faded printed label behind the clock and pendulum.Scratched onto the back: "To Australia in 1849. Samuel Richardson bought this clock in Ballarat1865"

Slide. Bendigo Views. View of a loungeroom. It has a small bookcase with photos on it and a shelf above it with a black mantle clock and a photo on it. There is more shelving with books, photos and a model of a sailing boat on it. There is a cabinet with model aeroplanes, ships and a coach in it. On the top is a larger model of an aeroplane. There are more pictures on the walls. There is a television in front of the bookcase.slide, bendigo, bendigo views, bendigo views

Object. Mantle Clock. 1940's 8 day time and strike clock. Veneered case with chrome bezel, silvered hands and numerals. Cathedral gong, chimes once on 1/2 hour and number of hours. Complete with pendulum and key. Presentation plaque on front reads Presented to Miss Gertrude Perry, Mitchell St, Popular Girl 1941'. Modified key for easy winding.person, bendigo, mantle clock, gertrude perry collection, mantle clock, bendigo easter fair

The wooden pattern is part of a set that are stored in a strong wooden crate. It was used at Briggs’ Brass Foundry for making sand casts. It may fit together with one of the other patterns with a similar outline. The traditional craft of sand casting is over 2000 years old. The handcrafted process produces brass and copper alloy goods that are well suited to marine use; bells, boat hooks, cowls, propellers, handles, lids, rowlocks, hooks, letters, bolts, rail holders, brackets, deck plates, flanges, rudder guides, portholes and covers. Briggs’ Bronze mixture is a copper-based alloy made from local ingots of copper, tin, zinc and lead in carefully measured quantities. The finished product is non-ferrous and can last indefinitely. The crate of patterns was donated by the Briggs family in the early years of Flagstaff Hill, along with other related items such as brassware, tools and machinery. The donated items were displayed in a simulated Brass Foundry in the Village along with other working crafts, trades and services found in a Maritime town. The items were on show from the completion of the building in 1986 until 1994 when the building was repurposed. The patterns represent the trades of foundering and metalwork, both supporting maritime industries such as shipwrights and boatbuilders. Farmers, manufacturers and other local industries also needed the castings made by foundries. The Brass Foundry included a historic Cornish chimney set up as a working model, to tell the story of smelted metal heated in furnaces then be poured into the sand moulds. This chimney was made from specially curved bricks and is now about two-thirds of its full height when originally located at the Grassmere Cheese factory. The craft of sand-casting from carved wooden patterns to create metal is an example of skills from the past that are still used today. The foundry pattern set is significant for its association with brass foundries locally and generally in coastal areas of Victoria. Marine industries such as ship and boat building rely on good quality castings for their machinery, equipment and fittings. Briggs Brass was especially formulated using non-ferrous metals to ensure their longevity. The patterns are associated with the long-running firm Briggs Brass Foundry that specialised in cast goods for the marine industry, ready to supply the needs for once-off or mass-produced items. Their products would have been fitted to sail and steam vessels along coastal Victoria including Warrnambool. Briggs Marine was also a bell-founder specialist and is also associated with the Schomberg Bell at Flagstaff Hill, having restored it to is former state as a fine example of the bell from a luxury migrant vessel from the mid-19th century.Pattern; thick square mostly unopainted wooden block with a solid half-cylinder added to the top, which has rounded shoulders. A disc is added to the front, aligned with the curve at the top. The top curve has orange paint and the dial is pink. Three holes are drilled in the back, in a triangular configuration. It is similar in shape to a mantle clock or an early-style radio. The pattern is part of a set of foundry patterns from Briggs Brass Foundry.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, briggs' bronze, traditional method, trade, sand cast, cast, brass alloy, copper alloy, pattern, mould, foundry, brass foundry, metal foundry, casting, sand mould, sand casting, marine equipment, marine tools, marine fittings, copper tin zinc lead, non-ferrous, non-corrosive, brassware, metalware, foundering, metalwork, maritime, bell founders, ship chandlers, marine products, biggs, briggs family, herbert harrison briggs, h h briggs, george edward briggs, cyril falkiner mckinnon briggs, cyril briggs, briggs & son brass foundry, h h briggs & sons foundry, briggs marine, alliance casting & engineering solutions, grassmere cheese factory, cornish chimney, curved bricks, collingwood, moorabbin, collingwood foundry, moorabbin foundry, 1912

This clock was originally in the front Office of the Soldiers Memorial Institute Bendigo on the mantlepiece of the fireplace. Original donor or date of being placed is unknown. It was last used in 2005 by Jack Barnes OAM who wound it every day he was in the Office, he was Secretary for 43 years of the BRSL. After the renovations to the SMI in 2016 - 18 it was placed on the mantlepiece of the fireplace in what is now called "The Building and RSL History Room"Mantle Piece Clock, timber frame, hinged glass cover over the face is missing, numbers are 1 - 12 on clock face, rear door to the mechanism, a pendulum weight is taped to the inside, no wind up key.On Clock face, "Gilbert". Around clock face, "Made in Winsted Conn United States of America"brsl, smirsl, mantle

In 1902, William E Sessions and other family members purchased a controlling interest in the E.N. Welch Company, a clock manufacturer located in Forestville, Connecticut. Sessions' father owned a foundry located in the town of Bristol, Connecticut that produced cases for E.N Welch Co. On January 9, 1903, the company was reorganized and registered as The “Sessions Clock Company”. Within a few years the Sessions Clock Company was producing clock movements, cases, dials, artwork and castings for their line of mechanical clocks. Between 1903 and 1933 Sessions produced 52 models of mechanical clocks, ranging from Advertisers, large and small clocks with logos of various businesses, to wall, or regulator clocks, and shelf or mantel clocks, designed for the home. Many of the Session clocks from this period are prized by collectors. In 1930, the company expanded to produce electric clocks and timers for radios, while continuing to produce traditional brass mechanical movements. Beginning at the end of World War II Sessions W Model (electric) was widely used by various casting companies for their clocks. The dial of the W Model read Movement by Sessions. In the early 1950s Sessions begin to produce timers for television. In 1956, Sessions was absorbed by a company interested mainly in their timing devices. In 1959, William K. Sessions, grandson of William E. Sessions left the Sessions Clock Company and formed the New England Clock Company. In 1960, one of the Sessions Clock buildings was sold to the Bristol Instrument Gears Company. Kept as the Sessions Company, the new owners ran the operation until 1969 when changes in the market forced the Sessions Company into liquidation. In 1970, the remaining buildings were sold to Dabko Industries, a machine parts manufacturer.The item marks a time when clock production in America was at it’s peak producing clocks for sale in many countries, they were keenly priced, mass produced and available to all. The company had a relatively short life span life regards clock manufacture later diversifying into electric timer mechanisms. Yet it was perhaps inevitable with the advent of electricity along with stiff competition from other clock manufactures that would ultimately herald the end in 1935 of the Sessions company's ability to continue manufacturing mechanical clocks. Clock mantle type face set in a painted black case designed to represent a Greek building with gold decorative pillars. Free standing with decorative feet. No markings or inscriptions on clock case or mechanism flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sessions, mantel clock, clock, clock industries

Undated cardboard hand-made sign listing the variety of products made by RVIB workers available for purchase at the show. Given the taped over word before 'show' this sign was most likely utilised across a number of shows (Melbourne and regional).Digital image of sign displayed for RVIB EnterprisesRVIB Enterprises Quality Products Made By Workers of the Royal Victorian Institute for the Blind Industrial Division. Show Special Prices On. Baby Gates Tissue Box Covers Door Stops Pot Plant Stands Folding Tables Ludo Mops Chopping Boards Hat Boxes Bread Boards Dominoes Solitaire Toy Boxes Jarrah Outdoor Settings Tapestry Frames Hookey Boards Treated Pine Out Door Settings Chinese Checkers Wall & Mantle Clocks Building Blocks Tapestry Frame Standsroyal victorian institute for the blind, signs

Metamec was a manufacturer of domestic clocks in the second half of the 20th century, and was based in Dereham, Norfolk, England. The name "Metamec" is derived from "metal-work and mechanics". The company started as an offshoot of the furniture manufacturers Jentique in about 1941, which made boxes for instruments and bombs during World War II.The first Metamec model was a mains-powered mantle clock numbered "701" (approx. 1947). All clocks produced by Metamec were produced to a high standard, The company declined in the late 1980s and went into receivership in December 1984 and sold to FKI of Halifax, West Yorkshire, who continued to use the name until 1993. Now another company is producing clocks under the Metamec name in Derbyshire England Gladys Reed who used this clock was a member of the Ormond Choral Society c 1950. who performed plays and musicals the City of Moorabbin Metamec was a manufacturer of domestic electric clocks in the second half of the 20th century, and was based in Dereham, Norfolk, England Gladys Reed was a member of the Ormond Choral Society c 1950. who performed plays and musicals the City of Moorabbin.Dressing table brass, electric clock with floral pattern.METAMEC / Made in Englandclocks, metamec ltd., norfolk england, reed gladys, clark judy, brighton, moorabbin, furniture, pioneers, clocks, market gardeners, early settlers, mechanics institute cheltenham, ormond choral society, postworld war 11 settlers, housing estates moorabbin 1950, bentleigh,

In 1850 the Ansonia Clock Company was formed as a subsidiary of the Ansonia Brass Company by Phelps and two Bristol Connecticut clock makers, Theodore Terry and Franklin C. Andrews. Terry & Andrews were the largest clock manufacturers in Bristol at the time with more than 50 employees using 58 tons of brass in the production of about 25,000 clocks in 1849. Phelps decided to get into the clock making business to expand the market for his brass, while Terry and Andrews got access to better quality brass at better prices. They had then sold 50% of their business to Phelps and moved the business to Ansonia, Connecticut. In 1877 the clock company purchased a factory in New York and moved most of its production thereafter being spun off from the brass company. Henry J. Davies of Brooklyn, himself a clock maker, inventor and case designer, joined the newly reconstituted company as one of its founders. As President, he is thought to have been largely responsible for the figurine clocks, swing clocks and other unusual and desirable novelties for which the Ansonia firm became known. By 1879, a second factory was opened in Brooklyn, New York and by June 1880 employed 360 workers, while the Connecticut factory continued producing clocks as well with a workforce of 100 men and 25 women. Hence, clocks marked "Connecticut" were generally produced before 1879, while those marked "New York" were all produced after 1880 After the New York factory burnt down in 1880 the company rebuilt the factory on the same site, and reopened the expanded factory in 1881, with a capacity to exceed that of the Connecticut factory which by 1883 had closed. By 1886, the company had sales offices in New York, Chicago and London, with more than 225 different clock models being manufactured. In 1899, Phelps' grandson William Earle Dodge Stokes commissioned architect Duboy to build the "greatest and grandest hotel in Manhattan, New York” which became the city's first air-conditioned building. In 1929 the majority of the timekeeping machinery and tooling was sold to the Soviet government's US trading company Amtorg, just before the stock market crash. The parts, machinery and key skilled workers were shipped out of the USA to form the basis, along with the remains of a watch company purchased a year later, of the clock and watch industry in Moscow such as Poljot and Sekonda. In 1969, the rights to the use of the name, trademarks, and goodwill were transferred to Ansonia Clock Co., Inc., Lynnwood, Washington. The item marks the beginning of mass produced clocks in the United States, cheaply priced and available to all. The company had many innervation's during it’s life regards clock and later wrist watch making that led the way for other companies in many different countries to emulate.Clock, pendulum mantle model. Carved scallop "Ginger bread house" cottage clock. Oak case, white enamel face, floral etched glass door. Clock has an hour bell chime. Glass front opens to allow rewinding. Made by Ansonia Clock Co, New York. Marked "Manufactured by Ansonia Clock Co. New York, USA"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, mantle clock, clock, pendulum clock, time keeper, horology, ansonia, ansonia clock co, america

This is a mantel clock used probably in the dining room or lounge room of a house. It would have been a common item in a household in the 20th century and was often an heirloom passed down from grandparents. This type of clock is an attractive item and is still regarded as highly desirable today.This clock has no known local significance but is retained as an attractive and historical item and serves as an example of a high quality household object of the past. This is a black wooden clock with a rectangular base with ornamental metal corner pieces and two ornamental gilt metal patterns. The clock has an overhanging rectangular top with two gilt handles on the side. Also on the sides of the lock are two green inset faux columns with two metal ornaments in between. The brass mechanism at the back of the clock has four wheels. The clock face has a glass front, black numbers and metal hands. There is a strip of brass around the outside of the face. There are two key holes on the face. 'Sessions'warrnambool, mantel clock

Founded in1903 when William E.Sessions and some of his family took over E.N.Welch Co. in Forestville. E.N.Welch Manufacturing Company used a local foundry to produce their castings. The foundry owner's son,William E.Sessions, took an interest in horology and ,along with other Sessions family members, bought controlling interest in the E.N.Welch Company., which was a joint stock corporation formed July 6th 1864 to succeed an older private firm who made clocks under the name of E.N.Welch. Elisha N. Welch (1809-1887),had been making clocks at a factory on East Main Street Forestville Conneticut after taking over J.C.Browns bankrupt business around 1856.Under William Sessions management the firm produced all components of their clocks including movements,cases,dials,artworks and castings.In 1930 the company expanded to produce electric clocks,timers for radios,televisions and other devices as well as their traditional brass mechanicial movements.In 1956 Sessions was absorbed by another company while retaining the name and in 1969 the business went into liquidation.Clock is made of black wood with Corinthian style columns,three set on each front corner. These are black metal, and show remains of gilt paint on top of columns.On the base of the clock is carved decoration with similar carvings on each of the four corners of square around clock face.Dial is cream with Roman numerals. the hands are set in gilt centre piece.Below the 12 is the name WELCH.The glass dial cover is edged in gilt. It is spring wound and has settings-day/night,1/2 hour strike(hour on gong -1/2 0n bell), Cathederal Gong, turn back hands. THE SESSIONS CLOCK COMPANY. Successors to the E.N.WELCH MANUFACTURING COMPANY.Forestville.Conneticut.United States of America.mantle clock, the sessions clock company, forestville conneticut united states of america

Westclox had a highly successful factory in Scotland situated in the Vale of Leven Industrial Estate, in Dumbarton, around twenty miles from the City of Glasgow. Westclox had originally planned to start production in Scotland in 1939 but the War intervened and it was not until 1948 that they were able to fully commission their factory in Dumbarton. Westclox Scotland produced its first clock on the 21st September 1948; a spring wound alarm with a 4 inch dial. The Westclox factory in Scotland was a full manufacturing plant with all their clocks assembled from start to finish with only the basic raw materials being brought in by outside suppliers. 95% of the staff were local people and the firm trained their employees from scratch to a high level of skill and had an annual apprenticeship for toolmakers and classes in horology. By 1949 Westclox Scotland were making 10,000 clocks a week, and by 1950, 1,000,000 clocks had been produced since its opening. No home in the Dunbartonshire Vale was without at least one Westclox clock, nor any raffle complete without a clock as one of the prizes! Many of these clocks are still around today. So successful was the Dumbarton factory that in the mid 1950’s Westclox had to expand into adjoining buildings. The factory then added watches to what they made as well as timing devices for other sectors. By the mid 1960’s, employment levels at the Scottish plant were around 1100. Over a third of the clocks manufactured in Scotland were exported to some 110 countries across the globe. Difficult times came in 1967/68 when 400 workers were laid off and the future of the plant was in doubt primarily due to cheap clocks from the then communist countries. However, strong petitions to the UK Government produced the passing of an anti-dumping law allowed production from the factory to pick up. In 1968 General Time was bought out by Talley Industries, which was best known as a manufacturer of timing equipment, such as factory time clocks to various industries. Westclox in Scotland enjoyed several boom years under the then Managing Director, John Santos. Westclox Scotland in October 1974 hosted a Space Seminar for the Astronaut, Neil Armstrong and British Astronomer, Sir Patrick Moore. Both visited the Scottish factory to promote the introduction of Quartz time-keeping. In 1976 the Westclox plant in Dumbarton became the Headquarters of General Time (International Operations) Ltd. John Santos retired from General Time and Westclox in the early 1980s and by 1988 the future of Westclox in Scotland was almost over. The advent of Quartz clock technology, developed largely by General Time for use in the Apollo 11 Command Module, resulted in the reduction of mechanical clock production and sales, and the factory fully closed in 1988.The Westclox factory building in Dumbarton has been converted and is now home to many thriving small businesses. The item marks a time when clock production in the United Kingdom was at it’s peak producing clocks for sale in over a 110 countries, they were keenly priced and available to all. The company had many innervation's during it’s life regards clock and later wrist watch making. In 25 years the factory had produced over 50 million clocks, yet it was perhaps inevitable with the advent of Quartz technology that was ironically evolved, largely by General Time for use in the Apollo 11 Command space Module, that would ultimately herald the end of the mechanical clock.Wooden bedroom alarm clock small painted brown with a criss cross pattern in gold and a white enamel face roman numerals & a glass front, clock case is of a fancy design. Inscribed on face "Made by Westclox Ltd Scotland" .flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, clock mantle, clock, mantle clock, westclox ltd, horology, clock industries

Donated by Professor F.J. Browne's widow, Dr Grace Cuthbert Browne. This clock used to be in the President's room, but stopped working in 1992.Art Deco mantlepiece clock that belonged to F.J. Browne. Attached brass plate reads "To Professor F.J. Browne /In Remembrance of many kindnesses/ Christmas 1934/ J.G.M"' Clock has an electric lead, but there is a 'not working'l tied to lead.

A fireplace with a mantle piece with a mirror on it and a number of small ornaments. The fireplace has a gas heater in it and a hearth. Above the fireplace is stonework. On the stonework is hanging a clock and a round picture on each side of it. One picture has a Dutch windmill in it and the other is a building. Next is another bookcase with various objects on it. There are two pictures and a black object on the bookcase. There is an armchair in front of each bookcase. There is a cabinet to the left of the door. Above the cabinet and the door are ornaments hanging on the wall. There is a smokers' stand near the armchair nearest the door and behind it is a stand with a cup and saucer on it.slide, bendigo, bendigo views, bendigo views

This mantel clock is one of a number of objects gifted to the Kew Historical Society in 2015. A number of the items relate to F.C.M. McArdle, the donors' father. Others belonged to his relatives. Some of the items testify to the family's close connection with the Sacred Heart Church in Cotham Road, Kew. A wooden mantel clock presented to Mr F. McArdle by the Kew Catholic Young Men’s Society on the occasion of his marriage. The date engraved on the plaque is 29 June 1936. F. McArdle was the father of the three McArdle family members who are donating the item. The donors were born at 3 Wills Street, Kew.cyms (kew), kew catholic young men’s society, mantle clock, f.c.m. mcardle