Set of four drawings, photocopy reduced to A3 size of the "Concept drawings re modifying W class circa Dec. 1988". Shows the introduction of a front door step, relocation of controls, bulkheads, changes to windscreens, introduction of a formal seat for the driver. subtitle - "Modified 'W' class", was proposed to be the W8 class at the time Date 1988, see Reg item 1970 for concept memorandum and 8789 for a working party set of notes. Second set added 8/3/17trams, tramways, w class, overhauls, preston workshops, drivers, w8 class

Three women stand beside computers and keyboards. The photo was taken as part of Disability Awareness Day, and Ballarat School of Mines student Jenny Noy samples the modified technology with demonstratr Fiona Still from the Micro-computer Application Centre and Ballarat School of Mines student Counsellor Jani Whiteballarat school of mines, disability, disability awareness day, computer, keyboard, jani white, jenny noy, fiona sill

Photocopy of a two page letter to Mr. J. Halfpenny of the Victorian Trades Hall Council, dated 20/2/1990 on PTC letter head titled "Past and future manufacture and installation of modified tram doors", providing information on the a request for information providing information on the supply and installation of new doors to Z class trams, contractors, manufacturers. Problems with modification program, in house work and may require further discussions. Signed by Bruce Shaw, General Manager, Industrial Relations.Has various notations and numbers in the top right hand corner.trams, tramways, preston workshops, z3 class, motors

This eight wheel tramcar was built 1914 for the Prahran and Malvern Tramways Trust. It was sold to the State Electricity Commission in 1951 for use on the Ballarat tramway system. The tram was altered to its present form in 1953 to permit one-man operation. It was modified to operate as a one man tram but limited use due to industrial bans. A conductor was used in Ballarat. In 1954 the tram was decorated for the visit of Queen Elizabeth II. In 1971 it was acquired by the Museum and repainted in the 1960s SEC colour scheme in 1979 Large colour photograph - laminatedGreen and cream tram with gold number and SEC symbol. St Aidens Dvs shown in destination window1914, melbourne, ballarat, tram 38, eight wheel, four wheel, one man tram, industrial ban, queen elizabeth

This is a modified version of the original Clover inhaler. Joseph Thomas Clover preferred this modified version over his later, portable regulating ether inhaler.This modified Clover's ether and chloroform inhaler is composed of metal and is cylindrical in shape. There is a gas distribution control key on the top and a metal hook enables the operator to hang the vaporiser from a strap around his/her neck. Stamped on top tap: COEXETER LONDONjoseph thomas clover, inhaler, ether, anaesthetic, portable, nitrous oxide, modified, gas, coexeter london, chloroform, rebreather bag, face mask

Soft covered booklet prepared by the Army Medical Services for the use of all ranksWO Code No 9640 AM Pamphlet No 342. 7610-010-5644first aid

A cream coloured cardboard cover with black information. The top right hand side reads 7610-66-033-8014. There are two rusty metal staples down the left hand side.australia - armed forces - service manuals, geneva conventions, war victims

The tram was originally built for the Hawthorn Tramways Trust in 1916. It was sold to the Electric Supply Co. of Victoria for use on the Ballarat tramway system and converted to an early form of one-man operation in 1930. It continued in service until 1971 when the SEC operated system closed. The tram was transferred to the ownership of the Museum. The tram is a single truck with drop ends, built as an open California combination. It is painted in the 1930 SEC colour scheme. Fares are Adults $4 and Children $2.Large colour photograph, laminated.Green and cream tram with No 27 on each end. St Aidens Dve in destination window. Board indicating Tram Rides and fares.tram no 27, hawthorn tramways trust, 1916, electric supply company, esc, ballarat tramway system, one-man operation, sec, 1971, ballarat tramway museum, california combination, fares

metal shell casingAustralian Commonwealth Military Forces

Black and white photograph (Print) with mountboard surround, enclosed in a timber frame (painted green) with Perspex glazing. Hanging string attached at back.leyland, bus, ambulance

Bob Hymans Collection Bob (Herman) Hymans (a former member of the Royal Netherlands Navy) was born in Bloemendaal, Holland on 30th September 1922. During World War II he fought against the Japanese in the Dutch East Indies (now Indonesia) and was imprisoned in Changi and on the Burma Railway. After gaining qualifications as a Ski Instructor, Bob arrived in Falls Creek in July 1950. Working as an Instructor and Supervisor at Bogong Lodge, Bob decided his future was in accommodation. He was successful in negotiating an indenture for land from the State Electricity Commission (SEC). It took Bob two years to build his Grand Coeur Chalet but, tragically, it was burned down in August 1961. Bob also built the first Chairlift in Australia. This was a single chairlift and the structure was built from wooden electricity poles. He was constantly full of new ideas and proposals for the village. Bob Hymans died on 7th July 2007. This Collection of documents and letters tells the story of Bob's endeavours to develop Falls Creek into the ski village it is today.This letter is significant because it documents the Bob Hymans' proposal to extend his Chairlift and the Committee's response.A letter acknowledging Bob Hymans' proposal to extend his chairlift. It clearly outlines documents which must be provided and the directive that no work shall be commenced before final approval is provided in writing.falls creek administration, licensee representatives

Photographed in BTM service in Wendouree Parade at depot JunctionYields information about BTM tram 28Colour photo with a plain back.btm, tram 28, wendouree parade

WW2 artillery or anti-aircraft shells and cartridges were often modified to function as flasks, lighters, or storage cotainers. they were often chromium or nickel plated and were classed as Trench Art.Cartridge and shell casing modified into Trench Art

Used to make bedjacket (Reg. 3921), but modified.Newspaper clipping with article from "The Australian Women's Weekly", 23 March 1946 entitled "Adorable Bedjacket" detailing pattern instructions (modified by Sylvia Maidment).knitting, maidment, mr ian maidment, ms sylvia, patterns, women's weekly

22 NBHC - Passenger Carriage - Excursion Car - specially modified for Wheelchair access allowing it to carry for wheelchairs and Guard's Van Puffing Billy Service History or Notes Between 1979 and 1988 the Puffing Billy railway built six more NBHs, numbered 18-23. These had steel frames, padded seats, and a wide "window sill". At first glance they look the same as the previous NBHs. There are other minor construction differences due to the use of steel framing. 22NBH entered traffic in 1998. Currently these six steel framed NBHs (numbers 18-23) are being modified to provide double doors and space for wheel chairs at one end. The photo on the right shows the exterior of one such NBH. These have a seating capacity of 24 passengers. Oct 2009 - Rebuild continues. Aug 2016 - 22NBC Wheel flats removed Sept 2016 - 22NBC Wheel flats removedHistoric - Puffing Billy Railway Narrow Gauge - Passenger Rolling Stock: Excursion Car 22 NBH which has been converted by the addition of a Guard's Van compartment and modified for Wheelchairs access by Puffing Billy Railway and re classed & numbered 22NBHC22 NBHC - Passenger Carriage - Excursion Car - specially modified for Wheelchair access allowing it to carry wheelchairs and to have a Guard's Van compartment. made of wrought iron and timber22NBHCpuffing billy, pbr, rolling stock , 22 nbhc

An original Kerr-Grant Microbalance, modified by E.J.Hartung This balance was invented in the chemistry department by Bertram Dillon Steele, later first Professor of Chemistry at the University of Queensland 1910-1930, in collaboration with Professor Kerr Grant, Physics. The design was widely used by other chemists, including Masson's mentor, Professor Ramsay, working in London on newly discovered rare gases (especially Radon), and Professor Hartung in Melbourne, investigating the chemistry of the decomposition of silver salts in photographic processes. The principle of the microbalance was to measure the change in density of a gas by the shift in the balancing beam due to a change in pressure of the gas in the balance case. The quartz balancing beam was made by Bertram Steele who was particularly skilled in glassblowing. A quartz beam is the beam of the Aston microbalance based on the Steele/Grant instrument, and described by F.W. Aston, the inventor of the mass spectrometer. The bulb at one end of the beam contained a fixed amount of air, so that a change in the pressure of gas in the balance case changed the buoyancy of the beam, yielding a displacement in the beam which could be measured. By this means, differences in weight of about 10 nanogram could be measured, in amounts of up to 0.1 gram. Such differences are significant the increase in weight of a metal sample due to surface oxidation (Steele's interest) in the weight loss due to radioactive decay of Radium (Ramsay's work), and in the estimates of density change due to the isotopic distribution of Neon (Aston). Ernst Johannes Hartung was a chemist and astronomer. Educated at the University of Melbourne (BSc 1913, DSc 1919), he became lecturer in 1919, associate professor in 1924, and succeeded Rivett as chair of chemistry in 1928, remaining in this position until 1953. Hartung?s lecturing style surged with enthusiasm and he employed the use of screen projections to demonstrate chemical phenomena to large undergraduate classes. In 1935 he recorded Brownian movement in colloidal solutions on 35 mm cinefilm, which was later copied onto 16 mm film for the Eastman Kodak Co. World Science Library. This can be viewed in the Chemistry laboratory. He researched the photo decomposition of silver halides, and was awarded the David Syme Prize in 1926. He devoted time to the design and construction of a large, new chemistry building for the School of Chemistry (built 1938?1939). During World War II he was approached by Professor Thomas Laby, chairman of the Optical Munitions Panel, to chair the advisory committee on optical materials, to produce high quality optical glass in Australia. This was successful, with large-scale production achieved within ten months at a reasonable cost. Hartung served three terms as general President of the (Royal) Australian Chemical Institute, was an ex-officio councillor of the Council for Scientific and Industrial Research, and a Trustee of the Museum of Applied Science (now part of Museum Victoria).An original Kerr-Grant Microbalance, modified by E.J. Hartung.

Cl Anderson (1843-1900) invented his forceps design in 1879, incorporating a finger grip which improved grip and lengthened the handle. This is a modified version of Anderson's design, made by Meyer and Meltzer.Possibly collected by Dr Frank ForsterSet of modified Anderson style forceps, consisting of two plated metal blades with ebony handles. Each handle has a pointed ebony spur towards the top of the handle for increased grip. Stamped 'MEYER &/MELTZER' on the inside of the handle of both blades.'MEYER &/MELTZER'forceps, obstetrics

Replica modified SLR rifle complete with magazine. Features camouflage paint work. Modified by 1 Squadron SASslr replica, armourer sgt tiger lions (raeme), sas, replica