Uniform issued to Arthur Thomas MANLY No 431130 RAAF. Arthur enlisted on 21.5.1943 age 18 years. He trained at various places, some including Narrandera, East and West Sale and Rathmines. On 8.6.1944 he was posted as an Air Gunner and on 8.12.1944 he reached the rank of Flt Sgt. He flew his first Operational flight at sea with No 2 Sqd RAAF on 21.12.1944. He embarked for Balikpapan on 12.6.1945 with 2 Sqd Mitchell Bombers. He flew 19 Operational sorties which included 5 strikes and attacks. He was discharged on 22.1.1946 with the rank of WO11.RAAF Staff Sgt, service jacket, blue. Chest (L) has 2 x WWII ribbons & Air Gunner's Badge buttons are darkened brass. Light blue cloth eagles sewn on each shoulder. It has 4 pockets & the waist belt is stored on rear of jacket in loops. Trousers not included.uniiform, raaf, ww2

The ES52 Kookaburra is a two seat high wing glider – sailplane of wooden construction designed by Harry Schneider and built Edmund Schneider Pty Ltd. It was first flown on 26 June 1954 and became the glider of choice for training new pilots of many gliding clubs around Australia in the 1950s, 1960s and 1970s. Several found there way to New Zealand. Further two kits were sent to Brazil and at least one of these was finished and flow successfully. The ES52 performed well with a glide ratio of about 22:1 and had soaring and cross-country capabilities. A notable feature of the ES52 design was the staggered side-by-side seating arrangement of the cockpit. This made for good in flight communication between instructor and trainee. Overall, thirty six were built by Edmund Schneider Pty Ltd. A longer wing version (the ES52B) was also introduced that had a better glide ratio (around 25:1). Five examples of this version were built. In Germany a modified ES52 was built incorporating a metal tube fuselage frame and with the addition of a engine driven propeller mounted on top of the wing which enabled the glider to be self launching. This museum collection item consists of the fuselage, tailplane, elevators, fin, rudder from the Mark I, ES 52 Kookaburra, formerly registered as VH-GFF and last owned by the Barcaldine and District Airsports Club of Queensland. The glider was in a damaged condition when it was acquired by the Museum. A decision was made by the Museum to repair the glider for display rather than endeavouring to restore it to an airworthy condition. The reconstruction of the wings is being undertaken by using parts of damaged ES 52 Kookaburra wings (as it happened from later ES 52 Marks). The Log Book for VH-GFF reveals operational life with a succession of gliding clubs around Australia. This exhibit will be of interest to gliding enthusiasts wishing to inspect the popular two seat club trainer of a by-gone era.This is a wood and fabric covered aircraft that is being rebuilt from the components of several aircraft as a non-flying exhibit.Fuselage marked with Edmund Schneider Pty Ltd Serial Number 9 and comes from the glider previously registered as VH-GFF.australian gliding, glider, sailplane, edmund schneider, es 52, kookaburra, barcaldine and district airsports club, victorian motorless flight group, alice springs gliding club, raaf richmond, raaf williamtown, gayndah gliding club, blackwater gliding club, southern downs aero and soaring club, charleville gliding club

The Salamandra is a Polish glider designed by Waclaw Czerwinski at the Military Glider Workshops in Krakow in 1936. This glider, designated “W.W.S.1”, was produced in substantial numbers prior to the second world war and used in Poland and some other eastern European countries for training pilots. Only one example survived the war, hidden away in the village of Goleszow in Silesia. In addition, no technical drawings could be found, so when the glider was discovered, the Gliding Institute being keen to re-establish gliding in Poland, used the glider to draw up new plans for construction. Five were built for the Institute in 1947 before production was resumed of the “Salamandra 48” at the SZD Jezow Workshops. Improvement were made by adding airbrakes and structural changes for the “Salamandra 49” and a windscreen and larger tailplane were changes adopted for the “Salamandra 53”. An export version designated “53A” was sold to and built under licence in China. Production of the Salamandra ceased in the early 1960s. Total production may have been in excess of 500. The glider was well regarded as a light weight trainer capable of soaring performance. The Museum’s replica was built by Ray Ash and may be may be classified as a “Salamandra 53”. However, he has added something of his own to the design by replacing the cable runs in the wings with control rods. The glider is substantially complete. The wings and tail / rudder surfaces have been covered with poly-fibre fabric. The fuselage woodwork is sealed with varnish. In addition to the finishing work (including painting) and rigging of the main components, the linkages for Ray’s control rod modification may need further engineering to make them operational. The Ray Ash Salamandra is the first of the type to appear in Australia. The Salamandra did not play any role in the development of gliding in Australia in the early years. However, it is an important exhibit in that it shows in tangible form a nacelle fuselage training glider in configuration and construction detail. As such it revisits the pioneering era of the 1930s and 1940s in Australia when wood, wire and fabric were the rule and the nacelle primary glider was generally the first step up for pilots who had mastered the basics in an open primary.Nacelled solo training glider of traditional wood and fabric construction. Construction incomplete.Noneaustralian gliding, sailplane, glider, salamandra, czerwinshi, poland, ash

These photographs are of the St. Albans Railway Station when the electrification of the line terminated at the St. Albans Railway Station. In 1991, the station was located on the city side of Main Road West and the level crossing was still in operational. It wasn't until 2012, when the line was fully electrified to Sunbury as part of the Sunbury Electrification Project. The level crossing was removed in 2016 as part of the Victorian Government Level Crossing Removal Project (LXRP).The train pictured is a Hitachi Train, or commonly referred to as the Silver Train. They were Melbourne’s iconic stainless‑steel suburban trains, introduced from 1972 and running until 2014. These trains were the last of Victoria's fleet not to have air conditioning, and by the 2000's, they no longer met contemporary safety and accessibility standards. The Hitachi trains had replaced the Harris trains, also referred as the Blue Train or Bluey. The Harris trains were taken out of service because they contained asbestos. One of photographs clearly captures the termination of the "Down Line" at the St. Albans Railway Station.5664.01 - St. Albans Railway Station (Sun Adv 207.2) 1990 Photo 01.JPG 5664.02 - St. Albans Railway Station (Sun Adv 207.2) 1990 Photo 02.JPGst. albans railway station, main road west, st. albans, hitachi train

Denis Gibbons (1937 – 2011) Trained with the Australian Army, before travelling to Vietnam in January 1966, Denis stayed with the 1st Australian Task Force in Nui Dat working as a photographer. For almost five years Gibbons toured with nine Australian infantry battalions, posting compelling war images from within many combat zones before being flown out in late November 1970 after sustaining injuries. The images held within the National Vietnam Veterans Museum make up the Gibbons Collection.A colour photograph of three members of the Australian Army Training Team Vietnam (AATTV) discussing operational requirements with the senior Vietnamese Army Colonel at Pleiku, South Vietnam. The advisers with their American counterparts commanded a Montagnard Mike Force Battalion.A colour photograph of three members of the Australian Army Training Team Vietnam (AATTV) discussing operational requirements with the senior Vietnamese Army Colonel at Pleiku, South Vietnam. The advisers with their American counterparts commanded a Montagnard Mike Force Battalion.photograph, aattv, pleiku, south vietnam, montagnard mike force, gibbons collection catalogue, denis gibbons, photographer, vietnam war, australian army training team vietnam (aattv), vietnamese army colonel

Denis Gibbons (1937 – 2011) Trained with the Australian Army, before travelling to Vietnam in January 1966, Denis stayed with the 1st Australian Task Force in Nui Dat working as a photographer. For almost five years Gibbons toured with nine Australian infantry battalions, posting compelling war images from within many combat zones before being flown out in late November 1970 after sustaining injuries. The images held within the National Vietnam Veterans Museum make up the Gibbons Collection.A black and white photograph of Uinited States Army Chinook medium helicopters wait on Kanga pad at 1 ATF Base Nui Dat to move an artillery battery to form an operartional fire support base. U.S. Army Gunship protection is land to support the Chinooks (Circa June 1967)photograph, united states army, chinook, 1 atf, nui dat, gibbons collection catalogue, us army gunship, operational fire suport base, kanga pad, helicopter, 1st australian task force, u.s. army gunship, denis gibbons

Replica of a Victorian Railways replacement number board that 6A carried in the later 40's and 50's. This plate was created for the preservation society's reenactment trains in 2012 for the 50 year celebration of reopening to Menzies Creek. Loco: 6A In service Thursday, 18th July 1901 Livery Green Owner Puffing Billy Gauge 762 Status Preserved - Operational 6A Built in 1901 and painted two-tone green, this locomotive was issued to the Colac to Beech Forest line and was used in that line’s construction. Over the years, it saw service on all four lines, but mostly on the Colac to Crowes and Upper Fern Tree Gully to Gembrook lines. It was temporarily withdrawn from service in 1958 and returned to service at Belgrave in 1962 for the reopening of this line where it saw almost continuous service until being withdrawn in 1983. It has been restored, as far as possible, to its original condition with original design side tanks, low bunker, original size windows, etc., but a steel cow-catcher in place of the original style wooden one. It also has its original colour scheme of two-tone green with white lining.Historic - Replica Victorian Railways Locomotive Number Plate of the type used on Steam Locomotive 6A in the later 40's and 50's created for the preservation society's reenactment trains in 2012 for the 50 year celebration of reopening to Menzies Creek. Number Plate 6A Cast aluminum replica number board.6Apuffing billy, menzies creek, 6a, number plate

Replica of a Victorian Railways replacement number board that 7A carried in the later 40's and 50's. This plate was created for the preservation society's reenactment trains in 2012 for the 50 year celebration of reopening to Menzies Creek. Loco: 7A In service Saturday, 6th May 1905 Livery Maroon Owner Puffing Billy Gauge 762 Status Preserved - Operational 7A Built in 1905 and painted Canadian red & dark brown, this locomotive was issued to the Wangaratta to Whitfield line and saw service on all four lines with most of its service on the Upper Fern Tree Gully to Gembrook line. It was temporarily withdrawn from service in 1958 and returned to service at Belgrave in 1962 for the reopening of this line where it has seen almost continuous service since. 1979 saw the early two-tone green colour scheme applied to this loco as a trial even though it never historically carried it, but its physical configuration was not altered accordingly. It is now painted its original livery of Canadian red & dark brown and will eventually be returned, as far a possible, to its original condition with a low bunker, narrow ash-chute, etc.Historic - Replica Victorian Railways Locomotive Number Plate of the type used on Steam Locomotive 7A in the later 40's and 50's created for the preservation society's reenactment trains in 2012 for the 50 year celebration of reopening to Menzies Creek Number Plate 7A Rectangular black and white number plate. Cast aluminum replica number board.7Apuffing billy, 7a, number plate

DH Tiger Moth Aircraft were used by the RAAF as elementary trainers in the empire air training scheme of 1940-44 during which time Australia trained 27,387 aircrew members. Although primarily employed as trainers, a few Tiger Moths were camouflaged and used operationally with army co-operation units in New Guinea. The Tiger Moth remained in RAAF service for almost 17 years, and several Tiger Moths were also transferred to the RAN after World War II. Eventually, on 9 January 1957, the last 10 RAAF Tiger Moths were flown from Point Cook to Tocumwal for disposal.The de Havilland Tiger Moth aircraft is a 1930's biplane which was a primary trainer aircraft used to train over 27,000 aircrew in Australia during the Second World War.Black frame with gold insert and cream mounting containing black and white photo of several planes in the background and numerous aircrew members in the foreground. Front: Aircrew Training. DH Tiger Moth Aircraft were used by the RAAF as elementary trainers in the empire air training scheme of 1940-44 during which time Australia trained 27,387 aircrew members. Royal Australian Air Force No.11 in a series of 25. raaf, aircrew, training, world war 2, tiger moth

2 small publications outlining changes to existing regulations. Both bear the logo of the Victorian Public Transport Corporation and are printed in black ink.fiction These booklets outline changes to regulations governing rules and operational procedures of Victorian Railways. The white booklet outlines Supplementary Rules and regulations Amendments for the operation of locomotive hauled driver only passenger trains in 1992. The pink booklet is a guide to the 1994 book of rules and operating procedures. It included major changes with respect to existing safe working policy so was a critical document issued to all staff to be read in conjunction with the full book of rules. vline safety, vline training, railways victoria, public transport corporation victoria

The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.Engine Instructor Geoff Williams walking beside Locomotive 1329 to lift the hand brakes. The T class were a class of diesel locomotives built by Clyde Engineering, Granville, NSW for the Victorian Railways between 1955 and 1968. Locomotive T329 was part of the first order completed and entered service in June 1956. At that time, they became the most numerous diesel loco in Victoria. In 1984, the 13 first series T class locomotives were sent back to Clyde Engineering Plant at Somerton in Victoria for a complete rebuild after which they became the P class numbered P11 to P23. This included locomotive T329 which became Locomotive P12. The P Class have proven to be a reliable and dependable class, seeing service across the state in both passenger and freight duties. They often operated in push-pull mode, with a locomotive at each end of the train. The P class locomotives ceased being used for regular passenger operations in November 2012. Although locomotive P12 (T329) is primarily in storage it is still operational and can be hired for special events and as recently as 2017 was also used as an infrastructure maintenance train.At top of train between headlights "T329" In centre Victoria Railways logo "VR"fred rochow, victorian railways wodonga, locomotive 1329

The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.Fireman Ian Sandford on steps of Locomotive T329. He is moving into position to apply the hand brakes. The T class were a class of diesel locomotives built by Clyde Engineering, Granville, NSW for the Victorian Railways between 1955 and 1968. Locomotive T329 was part of the first order completed and entered service in June 1956. At that time, they became the most numerous diesel loco in Victoria. In 1984, the 13 first series T class locomotives were sent back to Clyde Engineering Plant at Somerton in Victoria for a complete rebuild after which they became the P class numbered P11 to P23. This included locomotive T329 which became Locomotive P12. The P Class have proven to be a reliable and dependable class, seeing service across the state in both passenger and freight duties. They often operated in push-pull mode, with a locomotive at each end of the train. The P class locomotives ceased being used for regular passenger operations in November 2012. Although locomotive P12 (T329) is primarily in storage it is still operational and can be hired for special events and as recently as 2017 was also used as an infrastructure maintenance train.At top of train between headlights "T329" In centre Victoria Railways logo "VR"fred rochow, victorian railways wodonga, locomotive 1329

A SCION OF A PIONEERING HARCOURT FAMILY. KENNETH WARREN ENLISTED 3/1/1942. THE FLIGHT LOG REVEALS HIS SUBSEQUENT CAREER, WHICH COMMENCED WITH PILOT TRAINING AT BENALLA, VICTORIA 23/8/1942, TRANSFERED TO MALLALA SA OCT 1942 TO FEBRUARY 1943, THENCE TO CROUGHTON UK FROM 30 JUNE 1943 TO SEPTEMBER 1943 FOR FURTHER TRAINING, AT HUSBANDS BOSWORTH SEPTEMBER 1943 TO OCTOBER 1943, COMMENCED OPERATIONAL FLIGHTS OUT OF MARKET HARBOROUGH 18 OCTOBER 1943 THEN VARIOUS SQUADRONS IN BOMBING RUNS OVER EUROPE UNTIL 7TH MAY 1944 WHEN HIS LANCASTER BOMBER FAILED TO RETURN.. K R Warren was aged twenty when given command of a Lancaster bomber in the RAF. He was one of six Harcourt men who enlisted, trained and took to the air in defence of Britain during WW2BLUE CLOTH COVERED BOOK - BLACK PRINTINGROYAL AUSTRALIAN AIR FORCE

Document - 12 A4 pages, stapled in the top left hand corner, photocopied - titled "Tram Operational Training - Revised Tram Driver Training - 120 Hours". Gives the basis of the training undertaken by the PTC or The Met, Hawthorn Depot, Depots, what to be done on each day, knowledge of rules, trainers notes, tram test procedures, sample questions, practical tests for A class fault finding, test criteria. Last page is tram test score sheet. Document not dated, mid 1980's?trams, tramways, the met, drivers, driver training, instructions, ptc, a class

Newsletter, A5 centre stapled, 12 pages, December 1987, titled "Sparks - the Paper of the Public Transport Workers Association - No. 11 Dec. 1987" as a Special Strike Issue. Reports on strike by car cleaners at Dynon rail depot, replacement of train guards and tram conductors, guards on strike, how to survive while on strike, a "letter" (tongue in cheek) from the Premier to the Transport Minister, in the form of an exam, dispute with management at Dynon. Covers the proposal to remove over 800 jobs at the Tram and Bus Division, Connies, maintenance, revenue clerks, operational inspectors, tram drivers and bus drivers, Port Melbourne light rail conversion See also Reg item 1395 and 2963 for other similar documents.trams, tramways, unions, light rail, conductors, disputes, railways, preston workshops, the met, light rail

This item was donated by Leading Aircraftman Gregory Frederick Mead (A316860) who was with the Royal Australian Air Force and served in Vietnam with Base Support Flight from May 1968 to September 1968 and No. 1 Operational Support Unit from September 1968 to May 1969Metal, plastic, pale blue paint, black and silver knobs, On/Off switch, morse key. Sticky taped on white paper reads Morse Code Trainer.NS No. 5805-99-580-8558 Key telegraph F.I.L.71 Ser.No 2353signals, trainer, morse code, leading aircraftman gregory frederick mead, a316860, royal australian air force, raaf, base support flight, no. 1 operational support unit

Training program "PTC - One person operation Training Program for Tram Depot Trainers" - outlining the training of the depot trainers for crews at individual depots. Has a course outline, ticketing instructions, zones, general driving, operational procedures, and working safely. Two additional documents - test questions for ticketing and general driving and safe workings procedures. Dated 11/2/1993.Yields information about training of tram depot trainers for one person operation.Document - comb bound with card and plastic covers, approx 30 A4 pages + two stapled document of test questions.driver training, one person, ticketing, safeworking