This Boyle’s machine was made by the British Oxygen Company (BOC) in the 1950’s. The original Boyle's machine was invented by the British anaesthetist, Henry Boyle in 1917. His machine was a modification of the American Gwathmey apparatus of 1912, and became the best known early continuous flow anaesthetic machine. The Boyle’s machine was first made by Coxeter and Sons, under the direction of Lord George Wellesly, which was later acquired by the British Oxygen Company (BOC). Though a lot of changes have been made to the original design of the Boyle’s machine, the basic structure remains the same today.Green trolley on casters with flowmeter and vaporiser bottles attached to a stainless steel cross bar. There is a glass shelf at top of the trolley and a second glass shelf at base of trolley, above a pull out drawer. The pull out drawer contains 4 x black rubber masks, 3 x black rubber tubing connectors, 4 x seals, 1 a black corrugated rubber hose with red rebreather bag, red tube and masonite support board.Tin plate attached to upper portion of trolley: THE / BOYLE / apparatus / BY THE BRITISH OXYGEN CO. LTD.henry boyle, anaesthetic machine, gas, oxygen, flowmeter, nitrous oxide, british oxygen company, boc, coxeter and sons

Manufactured by Mine Safety Appliances, Glascow Scotland DRG No. OP5480 6D/2298 Serial No.45060

Nose piece is marked with 6D/775

In Australia, the wholesale druggists Fenton, Grimwade and Company, established in 1876, were producing small quantities of oxygen for medical and industrial purposes(11,11). In 1910, they produced a booklet promoting the therapeutic use of oxygen, suggesting it's use in pulmonary and cardiac affections, asphyxia, and morphine poisoning(9). Eventually, oxygen was to play a more significant role in medicine following two significant events. In 1895, Karl Von Linde succeeded in liquefying air, and then fractionally distilling its individual components, including oxygen. This new technique for the production of oxygen from air was revolutionary, but large demand for it did not develop in the wider community until Claude and Hess managed to compress acetylene into cylinders safely in 1897, keeping the highly explosive fuel stable by dissolving it in acetone. By 1900, the oxy-acetylene welding technique was born, and the demand for oxygen for industrial purposes accelerated worldwide. In Australia, Russell Grimwade, working for his father's company, ordered the first oxygen plant to be built in Australia in 1910. (George Kantianis, 2013)Medium sized black coloured cylinder with rounded base once containing oxygen with a large black on white diamond shaped manufacturer's label adhered to the front. Much of the label has been degraded with missing bits, and rust stains.Printed on to manufacturer's label: OFFICIALLY PREPARED FOR MED? / AUSTOX [in logo] / COMPRESSED / OXYGEN / CONTENTS / 33 [handwritten in pencil] Imperial Gallons / KEEP COOL / Australiand Oxygen and Industrial ? / Pty. Ltd. / MELBOURNEoxygen, cylinder, therapeutic, russell grimwade

Reference No.6D/278 ,PRT 3-68 IV.

Manufactured by R.E.Darling Co.Inc. A10061-8 MS22055-54 4th Qtr 1967

safety equipment from a C130 most likely acquired by a member of the battalionGreen Cordura bag with Velcro closure. Inside is a complete EPOS system still sealed in a plastic bag.Emergency Passenger Oxygen System

Manufactured by The Ohio Chemical and Manufacturing Co. The mask was invented by Arthur H. Bulbulian

one connector inscribed with markings 6D/101 MKIIIB

6D/816

Frank Mashek Co. Chicago ILL.

1 Glass bottle marked to 300 CC. 1 Regulator fitting with accessory adaptors."ETHER", "300 C.C". Hand written, "ETHRANE" "THE BRITISH OXYGEN Co LTD" "LONDON ENGLAND" "PATENT NO 536536" ether, surgical equipment, surgery, anaesthetic, british oxygen company

Inscribed with PRT 10 54 IV on upper part of the breathing hose.

In 1903 the oxyacetylene welding process was developed. Around the same time, new cryogenic air separation processes, based on work undertaken by Carl von Linde and others, replaced the barium oxide process. This paved the way for larger scale and more efficient production. British Oxygen Company, [1905 to 1969] was formally BRIN'S Oxygen Company Ltd from 1886 to 1905. In 1969 it became BOC. These Blowpipes were used at the Ballarat School of Mine c1916 Interesting article = 1917. https://trove.nla.gov.au/newspaper/article/1629321Boxed Universal Blow Pipe, presented under a perspex top. Pipes mounted by metal bar and hooks to polished wooden board. Display case is 69.0cm x 12.0cm x 25.0cmBoth pipes have metal plates indicating information of maker.blowpipes, ocyacetylene, ballarat school of mines, welding, cutting, commonwealth industrial gases, boc, brin's oxygen company, british oxygen company

Large unused diamond shaped Austox label made for use on ethylene cylinders. Red with beige lettering.Information printed on label: AUSTOX [logo] / INFLAMMABLE / ETHYLENE / KEEP COOL / Product of the British Oxygen Co. Ltd. / Contents...............c.ft. ...............gallons (Imp.) / Weight of Full Cylinder ..........lbs. ..........ozs. / 31 OUNCES ETHYLENE = 166 1/2 GALLONS (IMPERIAL) / Use only moderate force when closing valve / Always test with water for leakage after using / Australian Oxygen & Industrial Gases / Pty. Ltd. / MELBOURNElabel, cylinder, cig, ethylene, austox, british oxygen company, boc, australian oxygen and industrial gases pty ltd, commonwealth industrial gases ltd

Large unused diamond shaped Austox label made for use on carbogen cylinders. Beige with a black border, and green and red lettering.Information printed on label: SPECIALLY PREPARED FOR MEDICAL USES. / AUSTOX [logo] / COMPRESSED / CARBOGEN / CO2..........% OXYGEN.......... / (The percentages stated above are subject to tolerance) / KEEP COOL [in red] / CONTENTS: Imperial Gallons / WARNING - Great caution must be exercised to prevent any oil entering the cylinder, or being applied to the valve or fittings. The use of oil may lead to a dangerous explosion. [in red] / Australian Oxygen & Industrial Gases / Pty. Ltd. / MELBOURNElabel, cylinder, austox, australian oxygen and industrial gases pty ltd, carbogen, compressed carbogen

6D/644

Black and white photographTyped below photograph, "First Constable Bill Hall receives on behalf of Ringwood Swimming Club, an oxygen respirator from Harold Walklate (Country Liaison Officer, Royal Life Saving Society of Victoria). 15/12/57.

Medium sized diamond shaped label made for use on cyclopropane cylinders. White with a dark orange background and black and white lettering.Information printed on label: AUSTOX [logo] / INFLAMMABLE / CYCLOPROPANE / FOR ANAESTHESIA / KEEP COOL / (PRODUCT OF THE OHIO CHEMICAL & MFG. CO.) / CONTENTS: OZ. GALLONS (IMP.) / GROSS WT. CYLINDER LBS. OZS. / TARE WT. CYLINDER LBS. OZS. / AUSTRALIAN OXYGEN & INDUSTRIAL GASES / PTY. LTD. / 550 LATROBE STREET / MELBOURNE / C1label, cylinder, cig, cyclopropane, austox, ohio chemical and mfg company, australian oxygen and industrial gases pty ltd, commonwealth industrial gases ltd

Large unused diamond shaped Austox label made for use on carbon dioxide cylinders. Black and beige background, with beige and red lettering.Information printed on label: SPECIALLY PREPARED FOR MEDICAL USES. / AUSTOX [logo] / COMPRESSED / CARBON DIOXIDE / KEEP COOL [in red] / WEIGHTS: / GROSS..........LBS. ........OZS. / TARE..........LBS. ........OZS. / NET..........LBS. .......OZS. / Contents Imp. Gallons / USE NO OIL OR GREASE ON VALVE [in red] / AUSTRALIAN OXYGEN / AND / INDUSTRIAL GASES / PTY. LTD. / MELBOURNElabel, cylinder, carbon dioxide, cig, commonwealth industrial gases ltd, compressed carbon dioxide, austox, australian oxygen and industrial gases pty ltd

Large unused diamond shaped Austox label made for use on nitrous oxide cylinders. Dark purple, violet and white background, with white, violet and red lettering.Information printed on label: SPECIALLY PREPARED FOR MEDICAL USES. / AUSTOX [logo] / NITROUS OXIDE / KEEP COOL / WEIGHTS: / GROSS..........LBS. ........OZS. / TARE.......... LBS. ........OZS. / NET..........LBS. ........OZS. / Contents Imp. Gallons / WARNING. - Great caution must be exercised to prevent any oil entering the cylinder, or being applied to the valve or fittings. The use of oil may lead to a dangerous explosion. / AUSTRALIAN OXYGEN / AND / INDUSTRIAL GASES / PTY. LTD. / MELBOURNElabel, cylinder, austox, australian oxygen and industrial gases pty ltd, nitrous oxide

Large unused diamond shaped Austox label made for use on ethylene cylinders. Beige with red lettering.Information printed on label: SPECIALLY PREPARED FOR MEDICAL USE / AUSTOX [logo] / INFLAMMABLE / ETHYLENE / KEEP COOL / Product of the OHIO CHEMICAL & MFG. CO., CLEVELAND. / Contents...............c.ft. ............... gallons (Imp.) / Weight of Full Cylinder ..........lbs. ..........ozs. / 31 OUNCES ETHYLENE = 166 1/2 GALLONS (IMPERIAL) / Use only moderate force when closing valve / Always test with water for leakage after using / Australian Oxygen & Industrial Gases / Pty. Ltd. / MELBOURNElabel, cylinder, cig, ethylene, austox, ohio chemical and mfg company, australian oxygen and industrial gases pty ltd, commonwealth industrial gases ltd

Mechanical resuscitation devices, such as the Pulmotor and Lungmotor, were popular in the early part of the twentieth century. Their use waned in the 1920s as significant bodies like the British Medical Research Council and American Red Cross refused to endorse them. The most popular of the resuscitators to emerge in the 1930s was the E&J (Ericson and Johnson) resuscitator. The device was soon widely available, vigorously promoted with support from many medical practitioners. They were soon to be found in hospitals, emergency services like the ambulance and fire brigade, and voluntary life-saving organisations. In Australia, Norman James, director of anaesthesia at the Royal Melbourne Hospital, developed an interest in equipment for ambulances and the resuscitation of drowning victims. Little in the way of practical, portable equipment was available to either the ambulances or the voluntary life-saving organisations, such as Surf Life Saving Australia (SLSA); American resuscitators, like the E&J, were expensive and bulky to import. James designed a simple portable resuscitation device for local use after being approached by Jack Conabere, secretary of the Elwood Life Saving Club (ELSC). The resulting Royal Melbourne Hospital resuscitator, or the R.M. resuscitator as it was marketed, was a simpler, manual version of those available overseas. It was gas driven with a plunger, marked “Press”, and a safety valve. The small working unit attached directly to the facemask. Once the patient was positioned facedown and the airway cleared of debris, the mask was placed firmly over the face. The plunger allowed gas to flow and lung inflation; releasing the plunger allowed expiration. This simple resuscitator was marketed by Commonwealth Industrial Gases (CIG) and became very popular in Australia with volunteer and professional rescue organisations. It represents one of the many innovations in resuscitation equipment that resulted from cooperation between volunteer life savers and medical practitioners. Norman James worked closely with Jack Conabere and the Government Pathologist to develop the equipment. ELSC was the first life saving club to use the resuscitator on the beach. While conducting an early training exercise on 23 December 1951, they used it to successfully resuscitate a man who had drowned after capsizing his home made yacht. The R.M. resuscitator was also used in more inventive ways. At Fairfield Hospital in Melbourne, a group of physiotherapists and doctors did some innovative work with polio patients, teaching them glossopharyngeal (or “frog”) breathing, as a means of becoming less dependent on ventilators. In 1981, the Australian Standards Association stated that the RM head failed to meet its revised standards and it was withdrawn from the market. Red leather suitcase with black leather trim with metal studs. There are clip locks for locking the suitcase in the closed position. The suitcase contains equipment for oxygen resuscitation. There is a space allocated for two oxygen cylinders, however there are no cylinders present.Embossed into metal plaque: The C.I.G. / Oxy-viva / PORTABLE UNIVERSAL OXYGEN RESUSCITATORresuscitation, portable, surf life saving australia, royal melbourne hospital, rm resuscitator

Mask used for administering ether anaesthesia. This mask also has a carbon dioxide inlet tube. Carbon dioxide was found to promote deeper breather which assisted in attaining faster anaesthesia. The mask was designed by an American anaesthetist James Tayloe Gwathmey, (1863-1944). Gwathmey invented a range of anesthesia equipment. In 1904, he introduced this mask as one part of a resuscitation apparatus. Gwathmey modified an existing mask to more closely fit the contours of the face. The holes in the rim allow for oxygen to be delivered for resuscitation or for the delivery of a combination of oxygen and anaesthetic. Wire framed mask in tear shape. There is a hinged top bracket which allows for a piece of flannel or domette to secured to the mask, onto which the ether would be administered. There is an inlet tube near the hinged bracket to allow for the administration of CO2 or oxygen and the rim is pierced with holes.james tayloe gwathmey, ether, anaesthesia, anesthesiologist, carbon dioxide, oxygen