Collection of 47 colour slides showing how to use a hand saw and chain saw, pruning, grafting. Numbered 25-72hand saw, chain saw, pruning, grafting, arboriculture tools

In 1999, a series of photos were taken of Arthritis Victoria member, Glenda Shalman, demonstrating arthritis-friendly gardening tools and aids, and how to use them. Some of these photos were used to accompany an article in the Arthritis Foundation of Victoria's quarterly magazine, Arthritis Update. In this photo, a woman sits at an outdoor table, tending to her potted plants with a pair of hand-held pruning shears. The shears have thick, wide handles. On the table, there are three more handheld gardening tools with thick handles. A similar photo appears on page 13 of the Vol 12 Issue 3, Spring 1999 edition of the Arthritis Foundation of Victoria's quarterly magazine, Arthritis Update.COL photo of a woman is sitting at a table in the garden. She is holding up a pair of gardening shears with thick handles. On the table, there are several potted plants and three more pairs of various types of small gardening tools, all with the same type of thick handles.[On a yellow sticky note, in blue ink] Glenda Shalman Gardeningarthritis foundation of victoria, afv, arthritic aids, gardening aids, gardening tools, pruning shears, living with arthritis, pain management, arthritis update, 1999

Pittock collection: three metal tools * pruning secateurs, with leather strap, 210 mm L x 50 mm W x 30 mm D, no manufacturer's marks * adjustable wrench, metal with chrome finish, some rust, 110 mm L x 40 mm W x 15 mm D, no manufacturer's marks * small metal pliers, poor condition, 130 mm L x 35 mm W Items stored in Pittock coach builder's box, reference 13000.1.

A scotch eye auger is perfect for quickly making holes in dry or wet wood for making chairs, stools, and any number of woodworking projects. The scotch eye serves as a peg gauge and whatever peg you make to go into the hole should fit into the augers eye. Robert Sorby & Sons: The forbearer's of Robert Sorby had been cutlers in the Sheffield region of England, dating from the mid 17th century. Robert Sorby and Sons were registered in Sheffield in 1828 as a manufacturer of edge tools, saws, scythes and hay knives. In addition to manufacturing tools, they also diversified into the manufacture of crucible steel for tool manufacture. From circa 1860-1967, the Sorby factory in Sheffield was known as the “Kangaroo Works”. The Kangaroo Brand of tools was made by Robert Sorby & Sons. During the 19th century, they had a large trade in Australasia. By the early 20th century, they were manufacturing carving tools, planes and plane irons, circular saws, wood saws, butchers saws and cleavers, garden tools, pruning knives, coopers’ knives, bricklayers tools and joiners tools. In 1923 Robert Sorby & Sons was bought by Sheffield company Hattersley and Davidson. They are today one of the few remaining British tool manufacturers.The company has a long tradition of making edged tools for various uses and exporting them to Australia, however the subject item was probably made from the early 20th century up until 1967 when the company stopped exporting to Australia.Scotch Eye Auger, Double Twist with Lead Screw, square shaft, socket set at right angleRob Sorbey Sheffield stamped on shaft with Kangaroo trade markflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ring auger, carpenders tools, hole drilling, rob sorby & sons

A spokeshave is a hand tool used to shape and smooth woods in woodworking jobs such as making cart wheel spokes, chair legs, paddles, bows, and arrows. The tool consists of a blade fixed into the body of the tool, which has a handle for each hand. Historically, a spokeshave was made with a wooden body and metal cutting blade. With industrialization metal bodies displaced wood in mass-produced tools. Being a small tool, spokeshaves are not suited to working large surfaces. The name spokeshave dates back to at least the 16th century, though the early history of the tool is not well documented. The name spokeshave reflects the early use of the tool by wheelwrights. The first spokeshaves were made of wood usually beech with steel blades, before being largely superseded by the development of metal-bodied spokeshaves in the latter half of the 19th century, though many woodworkers still use wooden spokeshaves. Due to their widespread use and versatility vintage wooden spokeshaves remain commonly available and relatively low in price. Spokeshaves consist of a blade or iron secured to the body or stock of the tool, which has two handles one for each hand. The bottom surface of the tool is called the sole. The blade can be removed for sharpening, and adjusted to vary the depth of the cut. An early design consisted of a metal blade with a pair of tangs to which the wooden handles were attached, as with a draw knife. Unlike a draw knife, but like a plane, spokeshaves typically have a sole plate that fixes the angle of the blade relative to the surface being worked. There are a wide variety of different types of spokeshave, suited to different trades and applications. A now vintage tool made by an Australian manufacture in NSW who specialised in making pruning shears, hacksaw frames and heel shaves under the Erskin brand name. This tool is now sought after by collectors even though it was probably made in the first quarter of the 20th century. It gives a snapshot of how carpenters work with wood by hand showcasing their craftsmanship. Hollow face Spokeshave, metal body with black enamel finish. Erskin stamped on frontflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, spokeshave, cabinet makers tools, wood working, cutting tool, shaping tool

A two sided pruning saw blade has a top cutting edge used for making an undercut of a limb while the bottom cutting edge is used for regular pruning. One side of the blade has very coarse, irregularly sized teeth for cutting quickly through large branches. The other side of the blade has fine teeth for making clean cuts on small branches and dead wood.This tool is an example of an early pruning saw commonly used in Orbost.Pruning saw with wooden handle and double sided toothed blade. The wooden handle is attached with three screws. The steel blade has teeth on both edges - small on one side and longer on the other.tool pruning-saw horticulture

SHAPED WOODEN FRAME WITH SAW EDGE FOR PRUNING TREES OR CUTTING TIMBER. THE FRAME IS REINFORCED WITH METAL RODS THAT ALSO ADJUST THIS PIECE OF EQUIPMENT. ONE METAL ROD ACROSS THE TOPS STABILSES THE FRAME, ANOTHER ON AN ANGLE BRACES THE CENTRE WOODEN BAR. NONElocal history, trade, tools

Black and white photographs in an envelope marked O.H.M.S. Department of Agriculture, Burnley Gardens, E.1. All stamped,"Photograph by Publicity Branch Victorian Department of Agriculture." (1)-(2) B1687A-B Heavily pruned fruit tree. (3) B1688 Grafting tools. (4)-(8) B1689A-E Cutting techniques. (9)-(15) B1690A-G Joining graft techniques. (16)-(21)A-F Camellia graft. (22)-(26) B1692A-E Magnolia air-layering. (27)-(31) B1693A-E Plum root cuttings and scions and materials. (32)-(36) C668A-E Removing and planting rooted magnolia graft.department of agriculture, burnley gardens, pruning, fruit trees, grafting, tools, cutting, techniques, camellia, magnolia, plum, air-layering, approach grafting, whip and tongue grafting