Drawing, photocopied from the Sandringham and District Historical Society's files showing possible route and station locations of an extension from the Sandringham station. Prepared by the Railway Construction Branch of the Victorian Railways. Shows the tram lines. Possibly late 1930s.Yields information about a possible extension of the Sandringham railway line to Beaumaris.Drawing - photocopied with hand written notes - A4 sheetExtensive notes in ink.trams, railways, sandringham, beaumaris, new railways, railway construction branch

Buninyong had no railway station so residents would travel to Yendon to catch the train. The Yendon Railway Station building was demolished soon after this photograph was taken. The bluestone was purchased by John Vernon, and was used to construct retaining walls in a garden enclosure between the first two buildings at the new Ballarat Institute of Advanced Education campus at Mt Helen. This is now known as the courtyard between building 'F' and building 'G' at the University of Ballarat mt Helen Campus. The following article was published in the Ballarat Courier on 06 December 1968. 'Yendon Station to be demolished - The old bluestone railway station at Yendon is to be demolished. C.A.D. Fisken told Buninyong Shire Council of the proposal at its meeting yesterday. Fortunately, he said, the beautiful stonework would not be lost. It would be used and incorporated in the new School of Mines building at Mt Helen. the retention of the century-old building was the subject of representations by Council to the Railways following the closure of the station for goods traffic 'some time ago'. The building had also been noted by the National Trust as one of special interest. The Railways Department advised the meeting that an inspection had been made at the Yendon level crossing, but no recommendation could be made at present for installation of flashing light signals.'Bluestone building with dressed bluestone door and window jambs and chimney. The roof is corrugated iron. The platform edge is also of bluestone construction. The building is the former Yendon Railway Station (now demolished) on the Ballarat -Geelong main line (the original Melbourne to Ballarat mainline). When the line was opened, this station may have been originally called Buninyong as it was built a number of years before the Ballarat to Buninyong branch line was built. This this has subsequently caused some confusion. The station was later renamed Yendon. Verso in blue ballpoint pen 'No 47 Yendon Railway Stn' Stamped in purple ink 'N.L. Harvey & Son, Photographers, 131 Sturt Streeet Ballarat, Phone 25766, After hours 23397, Will photograph anywhere anytime any place. (in pen 3/12/68),university of ballarat, ballarat institute of advanced education, yendon, railway, bluestone, john vernon

Book details the construction of the Thai Burma Railway & the bridge over the Rivew Kwai. Contains detailed photos & drawings. Taken from an oration by Fred Seiker in which he recalls the conditions under which the POW's lived & worked.Soft cover illustrated front & back with colour & black & white photos. 60 pages with cut edges. Bound with staples. Stamped inside front & back covers: Bendigo District RSL Sub Branch books-military-history, civil engineering/railways, river kwai, burma

The Millennium Man was a large metal sculpture commissioned by Village Cinemas Sunshine in the 1990s. Created by BIGFish in Footscray, he was designed as a playful, larger‑than‑life movie mascot. He was a muscular figure holding a globe wrapped in a strip of film, symbolising movies around the world The sculpture and was built from metal, with a bold, comic‑book aesthetic and was only intended originally to last only five years, but he became a local icon instead. The Sunshine Marketplace redevelopment in 2016 included a significant refurbishment of Millennium Man but by 2020, he had deteriorated badly with rust and structural issues, and the fact that people loved climbing on him made him a public liability. The Millennium Man was removed sometime after 2020 and has not returned to the site. The wooden buildings of Sunshine Railway Station were demolished as part of the Region Railway Line works that created additional and longer platforms, pedestrian overpass with lifts for disability access. The City of Brimbank Sunshine Branch Library and Customer Service Centre was built on the former H.V. McKay Massey Ferguson Site. Eventually this complex was demolished to make way for the new Brimbank Community & Civic Centre. 5809.01 - Village Cinemas Sunshine Millennium Man.jpg 5809.02 - Village Cinemas Sunshine Millennium Man.jpg 5809.03 - Sunshine Railway Station Construction During Region Railway Line Works.jpg 5809.04 - Sunshine Branch Library And Customer Service Centre.jpg 5809.05 - Sunshine Branch Library And Customer Service Centre.jpg 5809.06 - Sunshine Branch Library And Customer Service Centre.jpg 5809.07 - Sunshine Branch Library And Customer Service Centre.jpg 5809.08 - Sunshine Branch Library And Customer Service Centre.jpg 5809.09 - Sunshine Branch Library And Customer Service Centre.jpg 5809.10 - Sunshine Branch Library And Customer Service Centre Demolition.jpg sunshine library, sunshine customer service centre, hampshire road, sunshine, millennium man, village cinemas, sunshine market place

Ordinary meeting notice including reports from Council's officers Report of the Town Clerk's Department Report of the Town Clerk Sunshine Tip Tipping Agreement City of Keilor, City of Fitzroy, City of Williamstown Transfer of Splays from the Department of Administrative Services Donations and Grants Request for Christmas Festival Skinner Reserve by Maltese Own Band Philharmonic Society Maltese Crusaders' Association hire of Errington Reserve for Maltese Festival Polish Sporting Recreation and Community Association Purchase of Land 556 Ballarat Ardeer Soccer Club Training Lights Ardeer Reserve Helene Street Ardeer Harrison Street and Miles Street Private Street Scheme Essendon and District Memorial Hospital Driver Improvement Program Holiday Programme Funding Application Maribyrnong Totting Club Robert Barrett Reserve Transfer of Discontinued Right of Way Hamilton Street, Burnside Street, Poole Street and Tullock Street Deer Park Transfer of Reserves from the Melbourne and Metropolitan Board of Works Block B Pizzey Street and Block G Clyde Street Transfer of Land From Strata Titles Act and Cluster Tittles Act Formal Allotment of Street Numbers Municipality Grid Map Ref PT A03 Report of the Acting Co-Ordinator of Welfare Services National Consultations on Multicultural and Citizenship YMCA Outreach Project Report of the Chief Health Surveyor Registration of Premises Health Act Transfer of Premises Health Act Prosecution Proceedings Sunshine Magistrates Court Issuing of Septic Tank Approval Notices Spastic Society Miss Australia Quest Report of the Medical Officer of Health Report of the Superintendent of Traffic and By-Laws Dog Act Report of the Chief Librarian Mobile Library Driver Librarianship Students Report of the Acting City Engineer / Planner Melbourne Metropolitan Planning Scheme Amendment No 160 Melbourne Metropolitan Planning Scheme Amendment No 184 & 185 Planning Permit Application Amusement Parlour 90 Hampshire Road Planning Permit Application Advertising Sign 35 Wright Street Planning Permit Application Special Accommodation House 16 Ridley Street 16 Ridley Street Service Premises and Petrol Filling station Lot 1 Sun Crescent Delegated Matters Plan of Subdivision Turner Crescent and Hughes Street Railway Construction and Property Board Plan of Subdivision 6 - 8 Turner Cresent Braybrook Railway Construction and Property Board Plan of Subdivision 14 - 16 Turner Cresent Braybrook Railway Construction and Property Board Plan of Proposed Consolidation 146 - 148 McIntyre Road Sunshine North North East Corner Cornwall Road and Hertford Road Safety Rails Request Request for Keep Clear to be Painted on Road Payment at Staughton Street and Norge Street Traffic Control Items Victorian Railways (Transportation Branch) Reid Street Construction of Easement Boral Resources North Sunshine Private Street Scheme Stage 1 School Crossing Oakwood Road between Evergreen Avenue and Annetta Court Hampshire Road Overpass Ayton Street Private Street Scheme Construction Scheme Ballarat Road / Duke Street South West Corner Request for Guard Rail Ballarat Road Relocation of Bus Stop Municipal Association of Victoria Pedestrian Safety Campaign Fence North Maidstone Pre-School Centre Report of the Building Surveyor Building Over Easement 89 Camperdown Avenue Sunshine North Permission to Erect a Brick Fence Building Over Easement Lot 229 Railway Parade Deer Park Show Cause Notice 10 The Esplanade Maribyrnong Underground Tank Lot 11 Williamson Road Maribyrnong Report of the Superintendent Parks and Recreation Tree Removal 5 Baynton Avenue Sunshine North Orders of the Day Accounts Submitted for Payment as at 15th July 198 Harrison Street and Miles Street Private Street Scheme city of sunshine, alexander "alex" george gillon, sunshine tip, skinner reserve, churchill avenue, braybrook, maltese own band philharmonic society, maltese crusaders' association, errington reserve, main road east, st. albans, polish sporting recreation and community association, ballarat road, albion, ardeer soccer club, ardeer reserve, helene street, ardeer, harrison street, miles street, deer park, essendon and district memorial hospital, maribyrnong totting club, robert barrett reserve, rosamond road, maribyrnong, hamilton street, burnside street, poole street, tullock street, pizzey street, clyde street, sunshine, hampshire road, wright street, ridley street, sun crescent, turner crescent, hughes street, mcintyre road, sunshine north, cornwall road, hertford road, staughton street, norge street, reid street, oakwood road, evergreen avenue, annetta court, albanvale, hampshire road overpass, ayton street, duke street, north maidstone pre-school centre, mitchell street, maidstone, camperdown avenue, railway parade, the esplanade, williamson road, baynton avenue

TACL-Tractor Appliance Company Limited TACL rail tractors manufactured by Malcolm Moore of Port Melbourne Located in the Parishes of Moondarra and Telbit, Gippsland, the tramway terminated at Collins Siding on the Moe Walhalla 2'6"gauge branch of the Victorian Railways. Its construction by the Forests Commission of Victoria was to facilitate the extraction of timber from the Southern and Western slopes of Mount Erica and to replace the outlet tramways destroyed during the disastrous forest fires of February 1926. Tyers Valley Tramway The line, following the Eastern arm of the river, passed Ingrams Siding (7m.) to terminate at a forest area, known as "Ten Acre Block", 8m. 60c. from Collins Siding. The western branch of the line followed the Western Tyers Valley to Growlers Creek, 13m. 40c. from Collins Siding. THE T.A.C.L. TRACTORS at Tyers Valley tramway. On the 19th January 1928, T.A.C.L. locomotive, purchased from Tractor Appliance Co. Ltd. (Malcolm Moore), was delivered. This unit had a 20 h.p. Fordson engine coupled by a chain drive to the two axles, providing a tractive effort of approx. 2000lbs. Wheelbase was 5’ and weight was four tons. It was intended that the two tractor locomotives, working with the grade, would deliver timber from the branch lines to Tyers Junction, from which place it would be steam hauled out to the Collins Siding transfer point. Following a breakdown of the steam locomotive, haulage during the early months of 1928 was carried out by the T.A.C.L. unit, supplemented by the Nattrass, which was, by this time, becoming unreliable. During April 1928, after ensuring that no suitable locomotive was available in Australia, an order was placed with the Climax Manufacturing Co., U.S.A. for the supply of a geared locomotive. A second T.A.C.L. engine was purchased during May and, on the 27th, the local mill owners, having obtained running rights on the tramway, commenced haulage with the Harman. The three tractor units worked the branch lines and transported ballast, whilst the Harman hauled the timber to Collins Siding in rakes of eight trucks (56 tons). The weekly loading of the line for the first, second and third weeks were 54, 62 and 71 trucks respectively. info from : http://www.nmra.org.au/tyersvalley/Tyers-Tram.html Historic - Industrial Narrow gauge Railway - Timber working - Rail Tractor used by the the Forests Commission of Victoria on the Tyers Valley TramwayRail Tractor with Fordson engine coupled by a chain drive to the two axles - made of steel and wrought ironerica sawmill, puffing billy, tacl, rail tractor, tractor appliance co. ltd. (malcolm moore), industrial narrow gauge railway, tyers valley tramway, forests commission of victoria

Double Headed Rail from Ravenswood Station Siding which was dismantled circa 1987 the two rails were stored for a time at Maldon before being donated to Puffing Billy Museum Bearing makers marks of Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield, North East Derbyshire, England from 1872 - 1883 Double-headed rail In late 1830s Britain, railway lines had a vast range of different patterns. One of the earliest lines to use double-headed rail was the London and Birmingham Railway, which had offered a prize for the best design. This rail was supported by chairs and the head and foot of the rail had the same profile. The supposed advantage was that, when the head became worn, the rail could be turned over and re-used. In practice, this form of recycling was not very successful as the chair caused dents in the lower surface, and double-headed rail evolved into bullhead rail in which the head was more substantial than the foot. Info from Wikipedia - Rail Profile https://en.wikipedia.org/wiki/Rail_profile The first records of double headed rail being used In Victoria by Victorian Railways was in 1859, the rails, chairs, oak and trenails were imported from UK. After the 1870’s the Victorian Railways went over to using flat bottom rails, but they still needed replacement double headed rail for lines already laid and this continued up to at least 1883 Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield England from 1872 - 1883 Mount Alexander & Murray River Railway The Melbourne, Mount Alexander & Murray River Railway Company received parliamentary assent in February 1853 to build Victoria's first inland railway from Melbourne to Williamstown, and Melbourne to Bendigo and Echuca. Construction commenced in January 1854 with work on a pier at Williamstown but lack of funds slowed progress, eventually prompting the company to sell out to the government. The 100-mile (162 km) section to Bendigo opened in October 1862. Its cost of £35,000 per mile made it the most expensive railway ever built in Australia. In 1864, the line was extended to Echuca, tapping into the booming Murray-Darling paddlesteamer trade. info from Museums Victoria - Victorian Railways https://museumsvictoria.com.au/railways/theme.aspx?lvl=3&IRN=450&gall=456 1863 Ravenswood Station open on the 1st Feb 1863 Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Ravenswood Siding When the Victorian Railways were established in 1856 they adopted one of the popular British permanent way standards - heavy 80lb (36.3kg) double-headed rail held up right in cast iron chairs attached to transverse timber sleepers by wooden pegs called trenails. The Ravenswood Railway siding was constructed in 1862 with 12 feet wrought iron double-head rail held in cast iron chairs with Ransom and May patent compressed keys. Trenails held the chairs to the sleepers and the joints were secured in joint chairs. Joints were subsequently joined using fish plates. It formed part of the Melbourne to Echuca rail line, initially known as the Melbourne, Mt Alexander and Murray River Railway. George Christian Derbyshire, the first Engineer-in-Chair of the Victorian Railways was responsible for the design and construction of the works. No new lines were built in Victoria using double-headed rail after 1870. The siding was disconnected from the main line in 1988. The Ravenswood Railway Siding demonstrates the original 1856 philosophy of the Victorian Railways to adopt British permanent way technology. The siding demonstrates significant aspects in the development of permanent way technology in England and Victoria over the period from the 1830's to the 1880's. The chairs in the Ravenswood siding are physical evidence of early railway technology rendered obsolete 120 years ago, namely joint chairs at rail joints and trenails to secure the chairs to the sleepers. The double-headed rail demonstrates an important stage in the evolution of British rail technology in the 1830s. The old fish plates, square headed bolts and square nuts demonstrate the success of fishing the rail joins. The Ravenswood siding demonstrates the earliest form of rail joint technology developed in England, and existing in Australia, the joint chair. In part of the siding the sequence of joint and intermediate chairs is consistent with the 1856 specifications, that sequence is rare with the joints secured in joint chairs. The survival of chairs in this sequence is rare and almost certainly demonstrates that they remained in continuous use at the same location from 1862 to 1988. This remnant of the Ravenswood siding has survived 126 years. The siding has proved to be the most significant of extant remnant double-headed sidings in Victoria, containing a rare combination of early permanent way technologies. Construction dates 1862, Info from Ravenswood Railway Siding Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/4693/download-report The remaining section of this siding is significant at the State and National levels in that it demonstrates the use of chaired rail by the Victorian Railways Department for the Trunk Lines and, more particularly, the following stages in the evolution of this long obsolete method of permanent way construction: a) The use of joint chairs and intermediate chairs at regular intervals inferring that the original wrought iron rail lengths were 12 feet, as is known through documentary sources to have been the case. The survival of chairs in this sequence is unique and almost certainly demonstrates that they have remained in continuous use at the same location and in the same sequence from 1862 to 1988 . b) The use of joint chairs and intermediate chairs designed for use with trenails. c) The use of later intermediate chairs designed for use with steel pins and the use of fished joints with steel double head chaired rail, representing a second method of constructing the permanent way using chaired rail technology. info from Ravenswood Siding - Melbourne/Echuca Railway Line - Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/70103/download-report Addition to Citation for Melbourne to EchucaRailway Line 1/10/1990 Double Head Rail The surviving lengths of double head rail with chairs on this railway compare with one surviving similar remnant on the Geelong to Ballarat railway and are representative of permanent way construction techniques applied exclusively to the two trunk railways of the 1860's. In this respect they are rare survivors and may be unique at the national level and of technical importance at the international level to the extent that they enhance contemporary understanding of early railway building technology. Surviving lengths of chaired double head rail survive at Kyneton, Ravenswood and Bendigo on this railway and include a number of different types of cast iron intermediate and joint chairs with hardwood keys and metal pins. The Ravenswood siding is of special significance for the diversity of chair types and for the sequence of chairs recalling rail lengths known to be associated with construction of the line in 1862. Construction of the Railway Tenders closed on 24 March 1858 with no less than 133 tenders being received. A contract was let to Cornish and Bruce for £3,356,937 to commence work on 1 June 1858 and complete the line by 31 July 1861. Cornish and Bruce made quick early progress with the Melbourne to Sunbury section being officially opened on 13 January 1859. The line was officially opened to Bendigo (Sandhurst) on 20 October 1862 by the Governor of Victoria, Sir Henry Barkly. A great banquet was held for 800 guests and this was followed by a grand ball. The extension of the line to Echuca was a relatively simple matter as that part of the line was across plain country without any significant engineering challenges. Tenders were called for the work in 1863 and the work was completed in 1864 by contractors Collier and Barry Apart from the line contractors, other firms directly involved were J Shire law and Co (sleepers), R Fulton, Langlands Brothers and Co, William Crossley (water supply), B Moreland, Langlands Brothers and Co (platelayers lorries), E Chambers (iron pins, traversers), Miller and McQuinstan (luggage vans and steam engines) and various contractors for building works. Info from Engineers Australia Engineering Heritage Victoria Nomination for Recognition under the Engineering Heritage Australia Heritage Recognition Program for the Goldfields Railways - Melbourne , Bendigo & Echuca Railway Page 25 - .2.9.2 Statement from National Trust of Australia (Victoria) Listing number B5323 for Mt Alexander/Murray Valley Rail Line: Page 69 - Theme 3 https://www.engineersaustralia.org.au/portal/system/files/engineering-heritage-australia/nomination-title/Melbourne_%20Bendigo_Echuca%20Railway%20Nomination.pdf The Melbourne, Mount Alexander and Murray River Railway Company was a railway company in Victoria, Australia. It was established on 8 February 1853 to build a railway from Melbourne to Echuca on the Victorian-NSW border and a branch railway to Williamstown. The company struggled to make any progress and on 23 May 1856, the colonial Government took over the Company and it became part of the newly established Department of Railways, part of the Board of Land and Works. The Department of Railways became Victorian Railways in 1859. Construction of the Bendigo line commenced in 1858, but this private consortium also met with financial difficulties when it was unable to raise sufficient funds, and was bought out by the Victorian colonial government. The design work was then taken over by Captain Andrew Clarke, R. E., Surveyor-General of Victoria, with bridge designs completed by Bryson and O'Hara The contract for the first stage of the line from Footscray to Sandhurst (now Bendigo), was let to Cornish and Bruce for £3,356,937.2s.2d ($6.714 million) with work commencing on 1 June 1858. Completion of the permanent way was to be by 31 July 1861 https://en.wikipedia.org/wiki/Melbourne,_Mount_Alexander_and_Murray_River_Railway_Company Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Victorian Railways : report of the Board of Land and Works November 1862 GP V 1862/63 no. 21 (2.8 MB) https://www.parliament.vic.gov.au/papers/govpub/VPARL1862-63No21.pdfHistoric - Victorian Railways - Double Headed rail Ravenswood Railway Station and Siding Victorian Heritage Database Reports Victorian Heritage Register VHR H1100 Victorian Heritage Register VHR H1786 National Trust VHR H1100 Mount Alexander and Murray River Rail way Line National Trust2 rail lengths of Double Headed Rail made of Iron makers marks : Wilson & Cammell - Dronfield - Steel and 20 joint chairs with metal rail pins Makers mark Wilson & Cammell - Dronfield - Steel (possible date 187? very hard to read ) puffing billy, double headed rail, wilson & cammell - dronfield - steel works, ravenswood station siding, melbourne to echuca rail line, initially known as the melbourne, mt alexander and murray river railway.

A postcard produced from a Victorian Railways aerial photo shows the CBD from the southwest during 1939. The Yarra River and associated docks. The caption on the rear notes that the SS Taroona is berthed at No. 1 berth, North Wharf. The Railway viaduct and the Fish market buildings are in the view along with St Kilda/Port Melbourne railway bridge and the Queen and Spencer St bridges. There is one tram on approach to the Spencer St bridge. Both the National Bank - Western Branch is nearing completion and Royal Insurance Building is under early construction in Collins Street. Postcard published by Great Southern Card Publishers, Feb.2018. See item 9663 for a c1970 view.Yields information about Melbourne in the late 1930s looking from the southwest.Postcard - black and white, divided back, unused.melbourne, spencer st bridge, aerial views, viaduct, yarra river, postcards

Ron Setford and his wife Grace Setford lived in Tanner Avenue, East Kew, from c.1946 to c.1995. A keen photographer, he recorded the changing face of Kew over a 20 year period. Apart from 30 photographs of built structures and places in Kew dating from 1960 and 1961, 145 of his 35mm colour slides chronicle the development of the Eastern Freeway through the Yarra Valley over a five year period from c.1972 to c.1977. This important collection was donated to the Society by his granddaughter in 2025.This collection of 175 35mm slides is of local and statewide significance, owing to its subject matter, particularly the major development of road transport infrastructure during the 1970s with the construction of the Eastern Freeway. The photographer also took care to annotate and date most of his slides which enable the researcher to pinpoint temporal and spatial locations.A photograph providing a visual contrast of the pre and post-World War II architectural styles of the Denmark Street Baby Health Centre and two of the Country Roads Board office buildings. Each was built on part of the land fronting the Kew branch line. In May 1939, the Railway Commissioners agreed to lease a site at the Kew Railway Station for a Baby Health Centre. The single-storey cream brick building was designed by Roland Chipperfield. The Country Roads Board (1913–83), later renamed VicRoads, transferred its headquarters from the Royal Exhibition Building to Kew in 1961, following the completion of two modernist eight-storey office towers in 1960. The VicRoads buildings were closed in 2024, and there is ongoing debate about what replaces them.Nilron setford, photographs -- kew (vic.) -- 1960s, country roads board, vicroads, denmark street -- kew (vic.), denmark street baby health centre

Ron Setford and his wife Grace Setford lived in Tanner Avenue, East Kew, from c.1946 to c.1995. A keen photographer, he recorded the changing face of Kew over a 20 year period. Apart from 30 photographs of built structures and places in Kew dating from 1960 and 1961, 145 of his 35mm colour slides chronicle the development of the Eastern Freeway through the Yarra Valley over a five year period from c.1972 to c.1977. This important collection was donated to the Society by his granddaughter in 2025.This collection of 175 35mm slides is of local and statewide significance, owing to its subject matter, particularly the major development of road transport infrastructure during the 1970s with the construction of the Eastern Freeway. The photographer also took care to annotate and date most of his slides which enable the researcher to pinpoint temporal and spatial locations.Opened in 1960, the California Motel at 138 Barkers Road, Hawthorn, was located opposite the entrance to Xavier College and built on the site of the former Barker railway station of the closed Kew branch line. The motel was advertised as “away from the hustle and bustle of the city and offering affordable accommodation for the business or leisure traveller”. Special amenities included air-conditioning, a business centre, and swimming pool. The motel had 82 suites. A possibly forgotten, but perhaps essential feature of the motel, was the Caltex Service Station at its entrance. The building was closed in April 2008, extensively vandalised and finally demolished in 2013."California Motel"ron setford, photographs -- kew (vic.) -- 1960s, california motel -- barkers road -- hawthorn (vic.)

Ron Setford and his wife Grace Setford lived in Tanner Avenue, East Kew, from c.1946 to c.1995. A keen photographer, he recorded the changing face of Kew over a 20 year period. Apart from 30 photographs of built structures and places in Kew dating from 1960 and 1961, 145 of his 35mm colour slides chronicle the development of the Eastern Freeway through the Yarra Valley over a five year period from c.1972 to c.1977. This important collection was donated to the Society by his granddaughter in 2025.This collection of 175 35mm slides is of local and statewide significance, owing to its subject matter, particularly the major development of road transport infrastructure during the 1970s with the construction of the Eastern Freeway. The photographer also took care to annotate and date most of his slides which enable the researcher to pinpoint temporal and spatial locations.Opened in 1960, the California Motel at 138 Barkers Road, Hawthorn, was located opposite the entrance to Xavier College and built on the site of the former Barker railway station of the closed Kew branch line. The motel was advertised as “away from the hustle and bustle of the city and offering affordable accommodation for the business or leisure traveller”. Special amenities included air-conditioning, a business centre, and swimming pool. The motel had 82 suites. A possibly forgotten, but perhaps essential feature of the motel, was the Caltex Service Station at its entrance. The building was closed in April 2008, extensively vandalised and finally demolished in 2013.Nilron setford, photographs -- kew (vic.) -- 1960s, california hotel -- barkers road -- hawthorn (vic.), california motel -- barkers road

Nimons Bridge was built in 1890, as part of the then Ballarat-Linton railway. The bridge is 17 spans with tall timber piers of four driven piles each, with triple sets of diagonal cross-bracing and walers and a single row of longitudinal horizontal bracing between piers. The spans are of a uniform twenty feet (6.1 metres), originally supported by four 21-inch x 9-inch (535 mm x 230 mm) Kauri timber beams per span, following the standard V.R. design of the period. When the superstructure was rebuilt after the 1953 fire, the timber beams were replaced with two 24-inch (610mm) deep rolled-steel-joists on each span. These are marked 'Lancashire Steel Co., Scotland' and are believed to have been second-hand. The deck of transverse-timber planks is 103.6 metres in length. Overall the bridge has an impressive appearance with its exceptionally tall triple-cross-braced piers creating a 'three-tiered' effect, with the deck 19.2 metres above the Woady Yaloak River. The Ballarat-Skipton line closed in 1985. Nimons Bridge has been recently restored, as part of the Ballarat-Skipton Rail Trail. How is it significant? Nimons Bridge is significant for technical, historic and aesthetic reasons at a State level. Why is it significant? Nimons Bridge is technically significant as Victoria's fourth-tallest timber trestle bridge when built, and as the third-tallest surviving example. It is also the second-largest composite bridge combining traditional timber piers with RSJ spans and a timber deck and falls within a select group of fewer than ten timber railway bridges with horizontal longitudinal bracing between the piers and three sets of double cross-bracing on its tallest piers, creating a visually striking 'three tiered' effect that enhances its viaduct form. Nimons Bridge is historically significant as having served initially the mining community at Linton, then the Western District agricultural area and in later years a kaolin quarry at Pittong. Nimons Bridge is historically significant as a representative of the 'light' branch line methodology that stimulated the explosion of railway construction in Victoria during the 1880s, and provides an interesting contrast with the more solid and vastly more expensive railway viaducts built in similar terrain on Victorian main lines, at Moorabool and Taradale, in the late 1850s. Approached by a deep cutting and high embankment at either end, the bridge represents a very cost-effective late 19th century engineering solution to the characteristic physiography of western Victoria with flat basalt plains intersected by deep wide valleys occasionally subject to severe flooding. Nimons Bridge is aesthetically significant for its visually impressive viaduct form, crossing a deep and steep-sided valley that is part of a rich cultural landscape. Within close proximity of the bridge are mullock dumps, tailings, shaft sites and other relics of the deep-lead alluvial mining era. The bridge is the most visually spectacular timber-trestle rail bridge in Western Victoria and is among the most spectacular timber-trestle rail bridges surviving anywhere in Victoria. It is part of the Ballarat-Skipton Rail Trail. Classified by the National Trust :02/10/2000 (http://vhd.heritagecouncil.vic.gov.au/places/67986)Colour photograph of a log bridge known as Nimon's Bridge.ballarat-linton, nimons bridge, nimon's bridge, log bridge, viaduct, timber-trestle rail bridge

The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.A livestock special being hauled by Locomotive K109 passing over a high trestle bridge between Bullion and Darbyshire on the Cudgewa Line. Cudgewa Line -The Cudgewa railway line opened in stages between 1889 and 1921. The first section from Wodonga to Huon opened on 10 September 1889. It was extended to Bolga on 18 July 1890, Tallangatta on 24 July 1891, Shelley on 13 June 1916 (the highest station in Victoria), Beetomba on 10 April 1919 and Cudgewa on 5 May 1921. The line had 1 in 30 grades and trestle bridges that have been heritage listed. In 1919, the line was used to carry materials for the construction of Hume Weir, and three years later a spur line connecting Ebden to the weir was opened. In the 1960s, Cudgewa became the railhead of materials for the Snowy Mountains Scheme. The last passenger service from Wodonga to Tallangatta ran on 30 September 1961 The turntable and passenger platform at Cudgewa were abolished in 1976. The K class was a branch line steam locomotive that ran on Victorian Railways in Australia from 1922 to 1979 Locomotive K190 entered service on Saturday, 30th June 1923. In 1940 it was renumbered as K149 The locomotive was eventually scrapped on Thursday, 12th October 1967.railways wodonga, fred rochow, wodonga railwaymen, cudgewa rail line, trestle bridges

The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.This locomotive was built in 1878 by Beyer Peacock & Co, Manchester, England. It arrived in Sydney on August 19, 1878 and began its working life as No 120 of C[79] class on the southern and western lines of NSW in September that year. On 24 May 1914, when the new branch line to Canberra was completed, the locomotive unofficially opened the track by pulling the first train to the construction site of the national capital. The engine was given the new number 1210 in the 1923 re-classification of NSW engines. Locomotive 1210 continued in use until 1958 when it was finally withdrawn from service. The NSW Steam Tram and Preservation Society appealed to the National Capital Development Commission (NCDC) and the NSW Railways to assist in the locomotive's preservation. As a result of the Society's appeal the locomotive was purchased by the NCDC for 800 pounds. The locomotive was relocated to the Canberra Railway Museum in 1984. It was restored with funds received from the Australian Bicentennial Authority. It was a requirement of the Bicentennial Authority Grant that the engine be operational. The locomotive was re-commissioned by the Member for Canberra, the Hon Ros Kelly, on 19 September 1988. As part of the Australian Bicentennial celebrations Locomotive 1210 attended the AusSteam '88 event in Melbourne, travelling south in the company with Locomotive 3112. It is claimed by the Australian Railway Historical Society that No 1210 is the oldest operational main line steam locomotive in the world.On front of locomotive "1210" railways wodonga, fred rochow, locomotive 1210

ill, maps, p.18.non-fictionA booklet commemorating the opening ceremony for the Rimutaka Tunnel in the North Island near Wellington 3-11-1955railroads - new zealand - pictorial, railroad construction - new zealand

ill, maps, p.24.non-fictionThe story of the construction and development of the Napier to Gisborne railway in the North Island of New Zealandrailroads - new zealand - north island - history, railroad construction - new zealand

ill, maps, p.61.non-fictionThe history of the Catlins River branch railway from Balclutha on the South Island Main Trunk railway New Zealand, to the town of Tahakopa.railroads - new zealand - south island - history, railroad construction - new zealand

ill, maps, p.24.non-fictionThe history of the Wellington to Johnsonville Railway in New Zealand from the time it was the Main North Island Trunk railway to a suburban branch line.railroad construction - new zealand, railroads - new zealand - south island - history

ill, maps, p.7.non-fictionA history of the railway from Christchurch to Picton in the South Island New Zealand.railroad construction - new zealand, railroads - new zealand - north island - history

ill, p.40.non-fictionA history of steam locomotives used by the New Zealand Public Works Department for construction and maintenance projects.railroad locomotives - new zealand - pictorial, railroads - new zealand - history

ill, maps, p.31.non-fictionA short history of the branch line from Yass Junction to Yass town in southern New South Wales.railroad construction - new south wales - history, railroad branch lines - new south wales - history

ill, maps, p.20.non-fictionA pictorial history of the branch line from Yass Junction to Yass town in southern New South Wales.railroad construction - new south wales - history, railroad branch lines - new south wales - history

ill, maps, p.32.non-fictionA brief history of the Henty to Daysdale railway branch line off the main Sydney to Albury line in New South Wales.railway construction - new south wales - history, railroad branch lines - new south wales - history

ill, maps, p.148.non-fictionA history of the Victorian Railway's branch lines out of Wangaratta to Bright & Yackandandah & the 2'6" line to Whitfield in North East Victoria.railroad construction - victoria - history, railroads - victoria - bright - history

ill, maps, p.40.non-fictionA history of the Victorian Railways branch line from Camperdown to Timboon in South Western Victoria.railway construction - victoria - history, railroads - victoria - camperdown - history

ill, maps, p.20.non-fictionA brief history of the Victorian railways branch line from Ben Nevis to Navarre in North Western Victoria between 1914 - 1954.railroad stations -- victoria -- pyrenee range -- history, railroad construction - victoria - history

index, ill, maps, p.64.non-fictionA brief history of the Tasmanian Government Railway branch line from Railton to Roland in Tasmania in the Municipality of Kentish.railway operations - tasmania - history, railway construction - tasmania - history

ill, maps, p.130.non-fictionA history of the suburban railways and goods lines in Wellington New Zealand.railroad operations - new zealand, railroad construction - new zealand