Two rusty steel railway spikes or "dog" spikes.None.railway spikes, railway nails, dog spikes

Spikes Railway and part of sleeper reputed from Burma Railwayephemera, ww2, general

Retrieved from original location by Kevin Myers during official military preparations for a Hellfire Pass memorial in recognition of the allied POW lives lost during construction of the Burma-Thailand railway during WW2.Direct connection between local (Montmorency and Victorian) soldiers in WW2 and the work undertaken by allied prisoners of the Japanese Army.Steel spikes used in construction of the Burma-Thailand railway during WW2.Noneprisoner of war, burma, ww2, railway

souvenirs, ballarat rsl, ballarat

Found at the site of the Rin Tin POW Camp in 2013. refer Cat No’s 3668 and 3669P.Railway spike, black metal, iron.souvenir, railway, burma

Railway spike from Birregurra Railway Stationbirregurra railway station

Plaque with metal railway bridge bolt and 2 metal railway line spikes. Spikes have lip on top to hold rail lines down with chisel shaped ends to be driven into sleepers. Metal bolt used to hold railway sleepers to bridgesNo markings on spikes or bolt. Plaque brass plate engraved-: BURMA RAILWAY BRIDGE BOLT & RAILWAY SPIKES Recovered 1987 By Ex P.O.W V.X. 30397 BILL TOON Approximatly 7,000 Australians Lost Their Lives Building This Railway Line 1942-1945.

Railway Spike from Thai Burma Railway mounted on wood.Ex Prisoner of War Association. Found by Bill Toon in 1994.

Metal railway spike 3.8 x 3.1 (head) 12.5 x 1.5. Head is offset and there is no point at the end. Washer is fastened below the head.railway spike, metalwork

Metal railway sleeper spike used in Bendigo.railway spike, sleeper spike

8405.1 - Forked, curved chisel; one end is well-hammered into a smoothly-curving surface. Use on mine rails, likely to lift rails by means of lever-action around railway spikes.

Framed collection of railway spikes and clips from the Thai-Burma Railway recovered from Hell Fire Pass in 1987. These items were recovered during a visit to the site by Australian Army World War 2 ex-serviceman John William Toon, service number VX30397. J W Toon (also known as Bill Toon) served with the 8th Division and was a prisoner of war.

This pump is an Ajax Type L2 Series A model, made and sold by McPherson’s Pty Ltd of Melbourne circa 1930’s to 1940’s, is a mechanical, hand operated, constant flow pressure pump. It would have been used to pump fluids from one area to another, for example from a dam to a tank or used as a bilge pump on a small vessel, mounted on the vessel’s bulkhead, floor or deck. This type of hand pump is sometimes called a ‘Reciprocating Suction Pump’. It has a mechanical pumping action of the lever moves the piston inside the pump up and down. The water is lifted from below the pump through the inlet pipe and into the pump’s cylinder. This action causes the lower valve to close and the piston’s valve opens and the pressure within the pump forces the water out of the pump through the exit pipe. The limitation of this type of pump is that it can only raise the water a maximum of about 7 metres from beneath the ground and yields 24-26 Litres per minute. This type of pump could be used for many purposes such as pumping water or fuel. McPherson’s 1940’s advertisement proclaims “For all jobs on the land – irrigation, spraying, tank, plumbing, fire-fighting – there’s a suitable “Ajax” pump. Send us the details of you pumping problem. Our Expert’s advice will help you choose the right pump – the one that will give you most years of PROFITABLE PUMPING.” (The Australasian (Melbourne) Sat. 26th October 1940.) McPherson’s Pty Ltd, the manufacturer, advertised a similar pump to this one in The Australasian (Melbourne) in 1936, calling it the Ajax Double Acting Hand Pump. In 1942 another advertisement advised that a representative for a fire-fighting equipment supplier was visiting the western district of Victoria. The company could now supply double-action two-spray Ajax pumps at lower prices than similar pumps the district had recently purchased from Adelaide. McPHERSON’S FOUNDER and COMPANY TIMELINE 1860 – Thomas McPherson, a Scottish immigrant (c. 1853 ), founded McPherson’s in Melbourne, supplying pig iron (lead ingots imported as ballast in ships) to local manufacturers. 1882 – Thomas McPherson established a warehouse in Collins St Melbourne and included tools, steam fittings and machinery in his wares. The business expanded to include steam saw mills and became known as Thomas McPherson and Sons (William Murray and Edward). 1888 – Thomas passed away and his sons inherited the business. In 1896 William Murray became the sole proprietor after his brother Edward’s death. 1900 – The firm expanded, establishing Acme Bolt Company to manufacture nuts and bolts. 1912 – McPhersons Pty Ltd established a machinery warehouse and showroom in 554-556 Collins St Melbourne. McPherson’s went on to establish branches in Sydney (1911), Adelaide (1921) and Perth (1930) 1917 - McPherson’s supplied ‘dog spikes’ for the transcontinental railway, running from Eastern to Western Australia. 1918 – A tool works set up in Kensington, Melbourne, manufacturing Macson lathes and made machine tools that previously had to be imported. 1924 – The Bolt Works was transferred to a new building in Melbourne. McPhersons began making pumps. 1929 – McPherson retired. His son (Sir) William Edward McPherson (known as ‘WE’), was born in Hawthorne, Melbourne, in 1898. After his education he began work in his father’s Melbourne hardware and machinery business He took over as governing director when his father retired. 1929-1932 – McPherson’s supplied thousands of tons of rivets from its Richmond (Melbourne) Bolt Works for the construction of the Sydney Harbour Bridge. 1936 – McPherson’s Pty Ltd is advertising Ajax Pumps in newspapers 1934 – McPhersons purchased the property adjoining the warehouse in Collins Street, and during 1935-1936 built a new office and showrooms on the site of 546-445 Collins St. 1939 - McPherson’s acquired the Tool Equipment Co. Pty. Ltd and Associated Machine Tools Australia Pty Ltd was formed to separate McPherson’s machine-tool manufacturing and merchandising interests. 1939 – Ajax Pump Works, a foundry and pump manufacturing plant, was established in Tottenham, Melbourne, and the Ajax Bolt and Rivet Co Pty Ltd began manufacturing in New Zealand. 1944 - McPherson’s became a public company, McPherson’s Ltd. 1948 - The Ajax Pump Foundry opened at Kyneton, Victoria and in the post war years it grew to became a large manufacturer. 1980’s – Ajax Pumps brochure lists the address as 6 Buckhurst St, South Melbourne, Vic 3205 with the Telephone number 03 669 3588 1988 - Ajax Pumps acquired the Forrers Company, which was established in 1921. Manufacturing in Ipswich, Queensland, specialising in submersible sewage pumps. 1991 – KSB Ajax was formed, bringing together the companies KSB and Ajax Pumps 1993 – Manufacturing was moved to state-of-the-art premises in Tottenham, Victoria 2001 - The Forrers facility was moved to Tottenham. 2007 - Company name KSB Ajax Pumps was changed to KSB Australia Pty Ltd. 2009 - KSB Australia opened a branch in Townsville, Queensland. 2011 - KSB Australia moved to its dedicated Water and Waste Water Competence Centre in Bundamba, Queensland. DISPLAY OF THIS AJAX PUMP This pump was installed at Flagstaff Hill Maritime Village as part of a working display in the village by the Friends of Flagstaff Hill, in acknowledgement of the dedicated involvement of one of its long serving members, Bob Crossman. The display was officially opened 31st March 2018 and incorporates a restored Furphy Tank and Water Pipe Stand. The pump is used to draw water from the lake, through the water stand pipe and into the reconditioned Furphy Tank. This Ajax pump made by McPherson’s Pty Ltd is significant for its association with McPherson’s, a prominent manufacturer of hardware in Victoria. McPherson’s is famous for supplying ‘dog-spikes’ for the transcontinental railway (eastern to western Australia, 1917) and rivets for the Sydney Harbour Bridge (1929-1932). The Ajax pump is also of significance because of its association with McPherson’s Governing Director (Sir) William McPherson, former premier and treasurer in Victoria 1928-1929. The former McPherson’s Pty Ltd building in Collins Street Melbourne is now on the Victorian Heritage Register VHR H0942 This pump is representative of mechanical pumps popular in the early to mid-1900’s and still used today. Hand operated pressure pump, double acting. Cast metal case, painted red, with steel hose attachments and long metal lever. Pump is bolted to wooden plank. Model of pump is AJAX, Type L2, Series A pump. Embossed on lower section of pump "L2 - 10", "L2 - -1", "AJAX" “(?) –2-1” Embossed on lower handle “3-7” “L – 4” Embossed on attached plate “FOR SPARE PARTS / TYPE L2 / SERIES A / PUMP ASSEMBLED BY T R” Manufactured by McPherson’s Pty Ltd of Melbourne circa 1930’s - 1940’s.flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ajax pump works tottenham melbourne, ajax pump factory kyneton, william edward mcpherson, thomas mcpherson of melbourne, mcpherson’s pty ltd melbourne, acme bolt company, tool equipment co. pty. ltd, associated machine tools australia pty ltd, ajax bolt and rivet co. pty ltd new zealand, forrers company ipswich queensland, ksb ajax pumps, ksb australia pty ltd, macson lathes, tool manufacturer early to mid- 20th century, ajax double acting hand pump, ajax type l2 series a pump, qisjax pumps, water pump 1940’s, fuel pump 1940’s, hand operated constant flow pressure pump, reciprocating suction pump, agricultural hand pump, plumber’s hand pump, portable hand pump

These spikes are from the old Snowy River bridge (the second) constructed in 1922 alongside the previous suspension bridge. Its building was a combined effort of the Victorian Railways and the Country Roads Board at a cost of 35,000 pounds. It was replaced in 1976 by the present bridge after several major floods.These items are from a significant piece of infrastructure built in Orbost in the early 20th century. This bridge no longer exists.Twenty-four iron spikes of four different lengths. They are probably hand-made and have round shafts and heads. They are very rusty.snowy-river-bridge bridge-spikes bridge orbost

This box was used by Lindsay Thomson's mother, Annie M. Thomson for the transport of hen eggs from Orbost to Melbourne by rail - C 1940's -1950's. The Bairnsdale-Orbost railway was opened in 1916 to serve the agricultural and timber industry. Because of the decline in traffic and heavy operating costs, the line was finally closed in August, 1987. Orbost Railway Station was opened on Monday 10 April 1916 as the terminus of the Orbost railway line, and closed in 1987. The station was located on the west side of the Snowy River despite the town of Orbost being on the east side of the river, in order to save on the costs of a bridge over the river, which at the time had highly variable levels. This item is associated with the history of the Orbost-Bairnsdale railway line and therefore reflects the role that the rail line played in the social and economic history of Orbost. A wooden box with two inside sections and a wooden lid which is secured on both ends by large nails/spikes which are fitted into a groove and are then turned. On front and back in black stencilled letters A M T O B container railway eggs

All objects supposedly brought from somebody near the site of the Thai Burma Railway..1) Rusted metal bolt. .2) Rusted metal spike. .3) Rusted bent piece of metal with pointed ends.equipment, railway, burma

Rail spike from Thai Burma railway mounted on a mahogany colour board. Silver inscription plate on top left of board Spike is L 14 cm. W 5 cm. with a rectangular headWhen you go home tell them of us, to say we gave our tomorrow for your day

This spike is designed for the purpose of securing wooden planks, beams, or railroad ties to create sturdy and durable bridges.This spike was used to secure wooden railway sleepers on the railways created for the Kiewa Hydro Electric Scheme.15cm steel bolt-like with a square shaft. Sharp at one end and enlarged steel head at the other end.railway sleeper spike, spike, bridge spike

Page 10 of Ray Pearson's Photo Album. Brown card page with four photographs (landscape format) placed on page using metallic look and black decorative photo corners. The photographs depict the driving of the first spike into tracks on the St Kilda electric railway, and trams. Hand written inscriptions are located between the top and bottom photographs and under the bottom left photograph.Hand written inscription in white-out or white pen between top and bottom photograph: COUNCILLOR T. BENT DRIVING 1ST SPIKE ON ST KILDA ELECTRIC RLY Hand written inscription in biro at base of page beneath bottom left photograph: NO 1melbourne tramways, councillor t bent, st kilda electric railway, historic tramways event

In 1902 a ballast siding was opened 4 km south of Gellibrand to provide materials for track construction. A spur siding with a capacity for six trucks was cut into the side of a slope. Above this was erected a loading bin and chute. The stone proved to be of durable quality so the siding continued after 1902 for periodic track re-ballasting works. The points were set for the main line and spiked shut when the siding was not in use. By the mid-1920s the Victorian Railways found it more economic to use ballast from Penshurst, so the siding was closed by 1925 and the rails lifted.B/W. Gellibrand ballast pit siding at 19 miles (30.6 km) south of Colac. gellibrand; gellibrand siding; railways;

Rail spike from the Wensleydale rail line. The line ran from Moriac to Wensleydale which closed in 1948 and was dismanatled in 1951. The rail spike is a large nail with offset head used to secure rails and base plates to railroad ties in the track.Nonerailway spike, wensleydale railway, crampon

2x metal spikes used to secure plates on railway tracks to sleepers

Set of 15 copy negatives, of black and white photographs of Victorian Railway trams from Ray Pearson Collection, taken by Dave Macartney in 1975c. Original negative held in the negative file. Scanned at 2400 dpi and cropped as necessary. Images as shown replaced by scan from the original Ray Pearson Album provided by Mal Rowe, April 2020 or that there is a better image. .1 - No. 1 - retained. .2 - Cr. T. Bent driving 1st spike - replaced .3 - Works car at Elwood - replaced .4 - No. 23 at Sandringham - replaced .5 - No. 35 at St Kilda - replaced .6 - ditto - replaced .7 - No. 51 at Sandringham - retained. .8 - St Kilda station view - retained. .9 - No. 3 cross bench car at Elwood - replaced .10 - No. 7 end view - replaced .11 - No. 5 at St Kilda Station - replaced .12 - No. 6 cross bench car side on view - replaced .13 - Cr. T. Bent driving 1st spike - replaced .14 - No. 7 - retained. .15 - Enclosed cross bench car at Sandringham - retained. trams, tramways, victorian railways, st kilda, sandringham

Solomon Heights is a 32–33 hectare pocket of Sunshine North, bounded by Baldwin Avenue, Munro Avenue, Vermont Avenue (south), Albion–Jacana railway line (west) and Maribyrnong River (north & east). In the 1920s, developers carved the land into 433 to 435 lots, but the estate never received roads, drainage, sewerage, or power. By 2025, it still had, unmade roads, no services, no development of any kind. The parcel of land has the presence of critically endangered flora and fauna species which is protected under federal and state laws. One of the flora species is the spiny rice flower, a small plant with spike tipped stems and pale yellow flowers. 5682.01 - Solomon Heights - An Urban Blight Part 1.JPG 5682.01 - Solomon Heights - An Urban Blight Part 2.JPG 5682.02 - Solomon Heights Strategic Assessment Agreement.pdf 5682.03 - Solomon Heights Glen Ora Estate Pty Ltd V's Brimbank City Council Court Judgment.pdf 5682.04 - Solomon Heights Estate Southern Section Map.pdf 5682.05 - Solomon Heights Land Use Planning Options Brimbank Ordinary Council Meeting.pdf 5682.06 - Lets Save Solomon Heights Grassland Nature For All Of Us Poster.pfdsolomon heights, sunshine north, michael solomon, spiny rice flower

Rail Spike from Thai-Burma Railway

Used at the Moorooduc Station opening ceremony 14th Septembers 1991. Shire Presidant Councillor Pat Leech perfomed the striking of the Pin. The Pin was later removed for posterity and to be re-used when the line is re-opened to Baxter.Only one ever produced specifically for MRPS.Stained timber box of 200x40x50mm with maroon silk lining containing a gold plated rail dog spike/pin.No inscriptions of memorial plates. Striking marks and withrawing marks present with mild tarnishing.mrps, mornington railway preservation society, moorooduc station opening ceremony, 14-sept-1991, rail dog pin