trophy plastic for manufacturers awardfirst manufacturers award to the manufacturer of the first outright winning cartrophy, award

Photocopy of a single page instruction titled "Hot Days Tram and Bus", providing policy in respect to working on hot days, OH&S issues, personal equipment, vehicle reliability and the provision of cool water. Signed by Russell Nathan, General Manager Tram and Bus for the PTC, has V/Line and The Met logos. Issued Jan. 1992trams, tramways, instructions, ptc, the met, v/line

The Ballarat Courier did an annual December magazine. The 1921 edition had the theme 'Industrial Ballarat'. Printed magazine with many Ballarat images and advertisements. Images include: Barnet Glass Road Race (Ballarat to Melbourne, c1921); Berry Anderson and Co.; View from Springmount; Ballarat North Gold Club; Lake-Burrumbeet; Ballarat Motor Cycle Club Reliability Trial; Ballarat Observatory; Ballarat Old Colonists' Homes, F.W. Williams, S.W.J. Clarkballarat, newspaper, wf coltman, ridings dentist, ballarat botanical gardens, lake wendouree, fishing, james smith pty ltd, ludbrook undertaker, jubilee lake daylesford, hager underthaker, springmount, barlow motors, ballarat mining exchnage, south street competitions, we longhurst, ru nicholls, lal lal falls, old colonists association of ballarat, clark cottage, swj clark, williams cottage, f.j. williams, ritchies grocery stores, american sailors, victorian methodist local preachers association, ballarat police force, macrobertson staff, ballarat sewerage authority, commons bros monumental masons, fdp miller, herbalist, lake tyers, pine plantation, tonner memorial, george tonner, ballarat observatory, ballarat north gold club, tw glasgow, suttons music store, barnet glass road race, lake burrumbeet, berry anderson, val purdue, rowlands, ballarat motor cycle club, stained glass windows

A document dated June 1989 examines the then MTA tram substation network and its issues at the time, in particular the reliability of the aging rotary converters and mercury arc rectifiers. It also considers the need to upgrade the network, increase the power supply for B-class trams, and reduce voltage drop.Yields information about the status of the tram substation and electrical equipment in 1989Photocopy of a 38 page A4 document.tramways, substations, mta, the met, power supply, electrical engineering, rotary converters, mercury arc

This operating and parts information sheet was supplied to consumers to help users of this kerosene iron, not only understand the operation of this self lighting iron, but also to be able to order any replacement parts that may be required for this high level usage appliance. At this period in time(1950's), this item was at the leading edge of ironing technology. During the earlier 1900's and before "the throw away" culture evolved(circa 1950's), reliability and long term application of domestic appliances was a necessity above all costs, especially in isolated rural areas. The construction of these appliances was geared to a longer service life and not to a cheaper two to three year life warranty. With levels of world wide technology at an ever increasing pace, long term reliability of any appliance was no longer sought after. Appliance upgrades and new improved model accessibility especially in rural areas has changed rural consumer's buying patterns. Although the concept of instructional and parts/warranty information booklets has not become obsolete, the ability to access information via electronic means has vastly improved the ability to obtain qualified technical help through local avenues. This access was not available in the time period(circa 1950), when the appliance covered by this document was issued. The rate of development within the home appliance field has mushroomed during the time period post 1950. The costs and the increased levels of product choices and consumer awareness has provided rural areas (once isolated e.g. Kiewa Valley) with a greater ability to satisfy their needs because of a greater diverse range of domestic appliances offered.This discoloured, sepia paper has black print and is folded into three equal pages. The information contained covers operational and part numbers for the kerosene fired hand held iron. there are kerosene stains on the last page and these have soaked through onto the second page. The form no.-3-3C- McACO.-4363Printed in U.S.A.instructions, household appliances, ironing, domestic ironing

The Redex Reliability Trial 1953 -The first Redex round-Australia reliability trial covered of 6,500 miles (10,500 km), and had a first prize of £1,000. It attracted both amateur and professional drivers in a variety of cars. The route passed through Brisbane, Rockhampton, Townsville, Darwin, Alice Springs, Adelaide and Melbourne before returning to Sydney and attracted much public interest. At the time the idea of driving huge distances around the country in ordinary cars was novel and the logistics were challenging. In many parts of the country there simply wasn’t adequate accommodation or suitably located refuelling stops. The Shell Company facilitated the race by placing petrol dumps along the 5000 km route between Townsville and Adelaide. The race began at the Sydney Showground on 30 August when 192 cars left at three-minute intervals. Of the twenty top finalists, two thirds were sponsored. Ken Tubman and John Marshall won the trial in a Peugeot 203. A black & white photo taken in Whitehorse Road, Mont Albert during the 1953 Redex Trial as a Volkswagen is passing 688 Whitehorse Road on the extreme left. The VW appears to have advertising on its panels indicating it was a competitor in the trial. On the far side of the road is a Morris Minor with a hatted man sitting on the bonnet. The houses in the background are partly obcsured by large hedges.george coop, mont albert, volkswagen, morris minor, redex trial, whitehorse road

Digital copy of a 9 page report by the MMTB, titled Project 3-75 - Replacement of Substation Equipment", proposing to replace the rotary converters installed between 1924 and 1930 with silicon rectifiers. Gives the locations, costs, schedule of replacement commencing 1975, in particular South Melbourne, Malvern and Young St Fitzroy. Gives a background to the system, a list of all the substations at the time, including date of installation, type, replacement of HV equipment, costs, reliability, maintenance costs, and benefit to cost ratio.Has the stamp of "Joint Ministry of transport and Tramways Library" and a "Plan & EPA Library barcode"trams, tramways, substation, transformer, power supply, electrical engineering, rotary converters

Document issued to all former M>Tram employees on the formal absorption or the reunification of the two networks into Yarra Trams on 18/4/2004 - see reference. Covers telephone, customer contact, uniforms, website, operations, media, cleaning, passenger information, depots, infrastructure, maintenance, fleet refurbishment, reliability and frequency, policies, advertising and the interim advertising campaign based around the covering up of the name M>tram.Yields information about the formal absorption of M>Tram into Yarra Trams in April 2004.Document - 4 A4 pages stapled in top left hand corner printed on green paper.yarra trams, national express, m>tram, tramways

How widely the prisoptometer was used is unclear but the Standard Optical Company later patented a new model, The Standard Prisoptometer, on June 21, 1904. Edward Jackson's crossed cylinder technique of determining astigmatism was first detailed in the Transactions of the American Ophthalmological Society (1887)4:595-598. The convenience of Jackson's crossed cylinder lenses over the prisoptometer in weight, cost, portability and reliability meant that they were soon almost universally adopted.This is a rare item as few are known world wide.This instrument is an optometer, that is, a device to measure the refractive error of an eye. It is made of cast iron, steel, brass and glass. It contains a prism which could be rotated, and was used to view a disc or an object circle. The prism caused monocular doubling of the object circle and the separation of the two images varied as the prism rotated, depending on the astigmatism present. The axis of the astigmatism was indicated by the prisoptometer and trial lenses were used to determine the the magnitude of the spherical and cylindrical refractive errorImprinted:"DR CULBERTSON'S PRISOPTOMETER/ GENEVA OPTICAL COMPANY MAKERS, GENEVA, N.Y./ PATENTED SEPT, 21, 1886". Stamped "853" on eyepiece and lens mounting.optometry, prisoptometer, optometer, astigmatism, refractive error, refraction, culbertson

Report - A4 perfect bound, printed on gloss white paper, 44 pages including card covers, titled "A Transdev - Transfield Services Partnership Yarra Trams - The first two years 1999 > 2001". Gives a list of Board members, list of managers along with photograph, photos of old and new trams, Box Hill extension, vision, customer charter, employees, various projects undertaken, operations - reliability, maintenance, Southbank depot, Preston Workshops, infrastructure works, finance, marketing, sponsorships and the future. Contains a complete listing of Yarra Trams Employees.trams, tramways, yarra trams, transdev, transfield, management, box hill, route 109, employees, lists, preston workshops, southbank depot, maintenance, trackwork

Photocopy of a newspaper report in The Age, 9-9-1998, titled "Trams safety report 'a joke'", written by Lyall Johnson, Transport Reporter, about a report made by consultants for the PTC about the safety of the drivers cab in one-man trams. Notes the consultants did not inspect the tramcars themselves. Quotes Union Secretary Lou DiGregorio, PTC Spokesman Russell Coffey. The Malvern depot was refusing to drive the trams. Report had been prepared by R2A Risk and Reliability Associates Pty Ltd. Commissioned by the PTC. Union want the cabs crash tested.trams, tramways, preston workshops, w class, unions, safety, ptc, one man trams

This Hewlett Packard 43120A monitor defribulator electro cardiograph equipment was trialled around 1981/1982 to Gren Sylvester at the Ambulance Officer Training Centre. Having proved successful, it was introduced to non-MICA (Mobile Intensive Care Ambulance) ambulances in Victoria. It was used successfully for at least 15 years and was noted for its reliability and also for its ability to keep working after being dropped. It was later replaced by lighter equipment. Source Ian Gordon AHSV assistant curator 23 March 2016.Monitor Defribulator Electro Cardiograph. Electrical equipmwntr with screen, paddle and carry handleSOUTHCARE UNIT NO 3monitor defribulator electro cardiograph, ambulance equipment

The Redex Reliability Trial 1953 -The first Redex round-Australia reliability trial covered of 6,500 miles (10,500 km), and had a first prize of £1,000. It attracted both amateur and professional drivers in a variety of cars. The route passed through Brisbane, Rockhampton, Townsville, Darwin, Alice Springs, Adelaide and Melbourne before returning to Sydney and attracted much public interest. At the time the idea of driving huge distances around the country in ordinary cars was novel and the logistics were challenging. In many parts of the country there simply wasn’t adequate accommodation or suitably located refuelling stops. The Shell Company facilitated the race by placing petrol dumps along the 5000 km route between Townsville and Adelaide. The race began at the Sydney Showground on 30 August when 192 cars left at three-minute intervals. Of the twenty top finalists, two thirds were sponsored. Ken Tubman and John Marshall won the trial in a Peugeot 203. However the Peugeot in this photo does not appear to be their car, judging by official photos of them with their vehicle, taken at the end of the trial. The Peugeot 203 was a popular car at the time and its reputation was enhanced after winning the trial. A black & white photo taken in Whitehorse Road, Mont Albert during the 1953 Redex Trial as a Peugeot 203 is passing 688 Whitehorse Road on the extreme left. The Peugeot 203 appears to have advertising on its panels indicating it was a competitor in the trial. On the far side of the road is a Morris Minor with a hatted man sitting on the bonnet, a woman standing close by and another man taking a photo of the passing cars. The houses in the background are partly obcsured by large hedges.george coop, mont albert, morris minor, redex trail, whitehorse road, peugeot 203

In 2015 during the development of the 2016 Commodores, which were to introduce the larger 6.2 litre LS # V8 engine, The decision was made ro return to the Nurburgring to attempt a sub eight minute lap, that success an ideal way the proposed Magnum range. This was the car chosen, a prototype ute, dubbed "McQueen" and a redline magnum development vehicle under a small team of engineers, it was extensively tested at Lang Lang proving ground and then track tested at Philip Island and Winton raceways to ensure that it had the necessary speed, handling and reliability.Prototype V F UteRed painted V F Magnum ute with black painted mag wheels.Holden emblem front grille and rear boot lid, LS3 6.2 Ltr V8 front bumper. RH rear boot V8 insignia. SS insignia LH Boot and both side panelsvehicle, v f model, holden

The FJ Holden is iconic in Australian motoring history. It was made in Australia by Holden from 1953 to 1956. During the 1950s, Holden dominated the Australian car market and by 1958 sales accounted for over 40 per cent of total car sales in Australia. The Redex Reliability Trial 1953 -The first Redex round-Australia reliability trial covered of 6,500 miles (10,500 km), and had a first prize of £1,000. It attracted both amateur and professional drivers in a variety of cars. The route passed through Brisbane, Rockhampton, Townsville, Darwin, Alice Springs, Adelaide and Melbourne before returning to Sydney and attracted much public interest. At the time the idea of driving huge distances around the country in ordinary cars was novel and the logistics were challenging. In many parts of the country there simply wasn’t adequate accommodation or suitably located refuelling stops. The Shell Company facilitated the race by placing petrol dumps along the 5000 km route between Townsville and Adelaide. The race began at the Sydney Showground on 30 August when 192 cars left at three-minute intervals. Of the twenty top finalists, two thirds were sponsored. Ken Tubman and John Marshall won the trial in a Peugeot 203. A black & white photo taken from near 688 Whitehorse Road. It includes 2 FJ Holdens - one is probably a passing car; the other is covered with labels and can assume to be competing in the trial. On the far side of the road are onlookers of men, women and one child standing on a wide nature strip. One man is taking photos. The houses behind are obscured by high hedges, but appear to be Californian bungalows, one with a large palm tree in its front garden.redex reliability trial, 1953, fj holden, whitehorse road, mont albert

Report - 148 pages + card covers, perfect bound, titled "Public transport reforms - Moving from a system to a service", Special Report No. 57 by the Victorian Auditor General's Office, May 1998. Has a $10 Price label on front cover, purchased from Information Victoria 2-2-1999. Follows the implementation of the Public Transport Reform Project of 1993 looking at implementation and the outcomes. Notes that Government is moving towards a privatisation model. Has a table of contents. Gives a background, conduct of the audit, level of the Government subsidy to transport, reliability, cleanliness, safety, efficiency and the planned privatisation environment for public transport.Has in ink "K-S 2-2-1999" on the first page.trams, tramways, ptv, reports, transport, public transport

Report - blue Rexene cloth heavy card covers, dark blue glued end sheets, fully sewn bound, with some 9 sections, with many sheets folded and appropriate paper spacing allowed for in the binding. Report titled "MMTB The ALL-ELECTRIC TRAMCAR" with MMTB logo in gold block on front cover and on the side of the report. About 150 pages. Report prepared by Frank R. Kirby Chief Engineer, December 1961. Has a table of Contents, Appendices, figures, tables and photographs. Report looks at the development of All Electric Tramcars in Europe and North America, the cost of maintenance of Melbourne's trams, operating costs, conductors, seated conductors, passenger handling, reliability, speeds, maintenance and capital costs.Has a lable on the first page, "Plan & EPA Library M0036918", Front cover stamped in red "Secretary's Files"trams, tramways, mmtb, pcc, germany, europe, all electric trams, prototype tramcar

A small Morgan's Official Street Directory, 1937. 20th Edition. Melbourne & suburbs, price 3/6. The front cover has green and black lettering on a white background. It has 100 Quick Reference Maps including all Rail, Tram & Bus Routes. Used by . The Police and Fire Brigades for Reliability & Speedy Reference. Copyright. There are may advertised businesses throughout the whole book. At the back is a free Wall Map showing the main roads of Melbourne and suburbs. The back cover has an advertisement for The Bradshaw and Everett College, 'In the City - yet out of the City at Princes Bridge'. It has green fabric tape covering the spine. There is a Forward, Contents, Index to buildings, Chambers, etc in the City, List of Justices of the Peace and more. Pp 328.non-fictionThis issue represents the 20th year of publication of Morgan's Official Street Directory so a special coloured wall Map has been included showing the main arterial roads of Melbourne and Suburbs. There are various important lists for reference, e.g Justices of the Peace, Index to Buildings and Chambers and more.maps, street directories, road maps, melbourne metropolitan area, directories

This equipment was located in the outpatients department (Philip Block) until September 2021 when it was deemed obsolete by Infection Prevention. Hubert Ingham Clements (1886-1969) was an Australian engineer who established his own engineering business in NSW in 1908 manufacturing combustion engines. He became interested in anaesthesia equipment and from the 1920s Clements worked on improving ether apparatus and manufacturing portable suction machines for use in hospital operating theatres. The latter machines were to earn an unrivalled reputation for reliability; many remained in service over thirty years after their date of production. The business became H. I. Clements & Son when his son William joined the company. (https://adb.anu.edu.au/biography/clements-hubert-ingham-12846)Item is an example of equipment from its time period and is of historic significance.Portable Clements Suction & Pressure Pump built by H I Clements & Son Ltd Consists of motor with attached carry handle, attached pressure regulator, attached disposable drainage cannister with tubing and power cable mounted on a trolley with castors.H I Clements & Son Pty. Ltd. Metal Manufacturing label with: Serial Number 1725FS and SAA Certificate Number BCG/4S/60194 on motor (front side) Ward 11 engraved on motor handle AH Biomedical Engineering orange test due sticker and AH Biomedical blue test sticker (reverse side)suction, clements, portable suction, respiratory, pressure pump, surgical drainage