The Sanyo ‘Sensor Touch’ television was assembled in Wodonga. Sanyo was one of the international companies that set up business in Wodonga in the 1970s as part of the decentralisation of industry. It continued operation into the 1980s. The Sanyo Australia Pty. Ltd. factory in Wodonga opened in 1974 with 35 staff and production peaked in 1976-1977 when it employed 360 people. In the first ten years 350,000 televisions were assembled from Japanese parts, however by 1984 the number of staff had reduced to 112 and the factory closed in 1987. All Sanyo televisions were then imported from Japan.The Sanyo ‘Sensor Touch’ television has local, state and national significance as it is thought to have been assembled in Sanyo Australia's factory in Wodonga. Sanyo was one of the international companies that set up business in Wodonga as part of the decentralisation of industry in Australia in the 1970s-1980s.Large Sanyo 'Sensor Touch' colour television with a faux wooden veneer frame and exterior. 53 cm or 20 inch screen (diagonal measurement)."SANYO / Sensor Touch / Telecolor" on the proper left side panel. "9 / 2 / 7 /28 /10 / 3 / 1 / 0 / AV" for the channels on the proper left panel. "COLOUR / BRIGHT / ONE / BUTTON / COLOUR / PULL-ON / VOLUME" under various buttons on the proper left panel. sanyo, colour televisions, televisions, sensor touch television, wodonga, sanyo australia pty. ltd.

Sanyo was one of the international companies that set up business in Wodonga in the 1970s as part of the decentralisation of industry. The Sanyo Australia Pty. Ltd. factory in Wodonga was officially opened on 25 October 1974 with 35 staff and production peaked in 1976-1977 when it employed 360 people. In the first 10 years, 350,000 televisions were assembled from Japanese parts. The official plaque was uncovered by Victorian Premier Rupert Hamer. In October 1977 there were 79 workers retrenched, followed by 30 in November and 45 in February 1978. In 1978 workers staged a sit-in which lasted over a week, to protest multiple mass retrenchments of staff. The factory stayed open for almost another decade. In 1982 the General Manager of Sanyo was quoted as saying the productivity in the Wodonga factory was 10% higher than in Japan. However by 1984 the number of staff had reduced to 112 and the factory closed in 1987. The premises were taken over by Parker Hannifin and the administration building is now the home of 3D Lanes Bowling Alley. The street in which it is located is now called Sanyo Drive.These images are significant because they document and industry which employed many people in Wodonga in the 1970s and 1980s.A set of black and white photographs of the Sanyo Australia Pty Ltd premises in Wodonga.sanyo, sanyo-guthrie wodonga, decentralised industry wodonga

The Sanyo VHF colour television is thought to have been assembled in Wodonga, as Sanyo was one of the international companies that set up business in Wodonga in the 1970s as part of the de-centralisation of industry and continued operation into the 1980s. The Sanyo Australia Pty. Ltd. factory in Wodonga opened in 1974 with 35 staff and production peaked in 1976-1977 when it employed 360 people. In the first ten years 350,000 televisions were assembled from Japanese parts, however by 1984 the number of staff had reduced to 112 and the factory closed in 1987. All Sanyo televisions were then imported from Japan. The Sanyo VHF colour television has local, state and national significance as it is thought to have been assembled in Sanyo Australia's factory in Wodonga. Sanyo was one of the international companies that set up business in Wodonga as part of the decentralisation of industry in Australia in the 1970s-1980s.Cream and black plastic Sanyo VHF colour televison, with the Sanyo logo and one large circular VHF control knob for the different channels on the proper left black plastic panel, and one small off-on volume knob at the bottom of the black plastic panel. The diagonal screen measurement is 30 cm or 11 inches."VHF" / SANYO / Telecolor / AFT / OFF-ON/ VOLUME" on the proper left black plastic panel on the front of the television. "75Ω- 300Ω" on the black part of the cable attached to the two antennas. "FOR YOUR SAFETY / Install any external / aerial to AS1417.1" on the back of the television. "SERIAL NO / 30207332" on the back of the television. "SANYO / MODEL CTP 2600 / CHASSIS NO. 79P-B5ZH 01 / AC 240V~, 50Hz, 85 WATTS / SANYO ELECTRIC CO., LTD. MADE IN JAPAN / WARNING / DANGEROUS VOLTAGE INSIDE / CHASSIS LIVE / CONTACT IS DANGEROUS / 3401901 B5ZH-B" on the back of the television. "SBS TELEVISION" stickers on both sides of the television. "WODONGA ASSEMBLED TELEVISION. (underlined) / This SANYO VHF COLOUR TELEVISION / Serial number AS1417.A (AS = Australia) / Model CTP 2600 was assembled / at the Sanyo Drive, Wodonga, factory Circa 1980, from Japanese parts." printed on a paper label attached to the upper back part of the television. sanyo, sanyo colour televisions, sanyo t.v.s, vhf t.v.s, sbs, wodonga, sanyo australia pty. ltd.

This photo is from a collection donated by Elaine Mann. Elaine Mann was married to David Mann, a successful Wodonga businessman and community leader who passed away in Wodonga in June 2012. David was a member of the Mann family who began their business in Wodonga in 1920. Elaine was a teacher in Wodonga for many years and an active member of the community. Sanyo was one of the international companies that set up business in Wodonga in the 1970s as part of the decentralisation of industry. The Sanyo Australia Pty. Ltd. factory in Wodonga was officially opened on 25 October 1974 with 35 staff and production peaked in 1976-1977 when it employed 360 people. In the first ten years, 350,000 televisions were assembled from Japanese parts. The official plaque was uncovered by Victorian Premier Rupert Hamer. In October 1977 there were 79 workers retrenched, followed by 30 in November and 45 in February 1978. In 1978 workers staged a sit-in which lasted over a week, to protest multiple mass retrenchments of staff. The factory stayed open for almost another decade. In 1982 the General Manager of Sanyo was quoted as saying the productivity in the Wodonga factory was 10% higher than in Japan. However by 1984 the number of staff had reduced to 112 and the factory closed in 1987. The premises were taken over by Parker Hannifin. The administration building is now the home of 3D Lanes Bowling Alley. The street in which it is located is now called Sanyo Drive.This photo collection is of significance as it documents how the businesses and buildings in Wodonga have evolved and contributed to community throughout the late 20th century.Sanyo Factory construction. A $1 million factory built in Wodonga to assemble 300,000 colour-television sets in readiness for the introduction of colour TV in Australia on March 1, 1975. The building is now occupied by Parker Hannifin and also Wodonga Ten Pin Bowls.wodonga businesses, high st wodonga, sanyo

The first transistor radio (the Regency TR-1) was produced by Regency Electronics in cooperation with Texas Instruments in 1954. Transistor 4 , the AWA transistor radio was manufactured by Amalgamated Wireless Australasia Limited (AWA), Australia's largest and most prominent twentieth century producer of radios, televisions, audio and telecommunications equipment. Transistor radios went on to become the most popular electronic communication device of the 1960s and 1970s. Billions of transistor radios are estimated to have been sold worldwide between the 1950s and 2012. They were exceptionally popular amongst young people in Australia due to their portability, allowing them to be taken wherever you wanted to gather with friends or, due to the headphone attachment, without disturbing those around you. These pocket radios are representative of technological developments which had a vast influence on social life and activities throughout Australia.4 pocket transistor radios of various brands. No. 1 orange Sanyo RP 1280 manufactured in 1979/1980. No2. is white bakelite No. 2 K--181 pocket transistor made by the Kmart Corporation c1975 and No. 3 is a Nation Brand AM Portable Receiver made in Hong Kong c1980. No. 4 Is an AWA Radiola B121 Solid State pocket transistor. All of them include a socket to plug in an ear piece.No. 1 on the front "SANYO RP 1280 and tuning dial. On the back: "SANYO MODEL RP 1280/ DC 3 V 2 x "AA" BATTERY/ SANYO ELECTRIC CO. LTD." No. 2 on the front "K-181" and tuning dial. On the back "Code 600-857/ AM POCKET RADIO/DC-3VC (UM-3x2)/ART 181. HONG KONG" No. 3 AM Portable Receiver Nation Brand on front No 4. on the front: below dial - AWA Radiola B121 ad at bottom "SOLID STATE" On the back: AWA Thorn Consumer Products Pty. Ltd./Model No. B121/Batteries 2 x UM-3 OR AA Cells/AM 520 -1620KHz/ Serial No. 75686/ Made in Hong Kong"radio communications, transistor radio