Collingwood Technical School trained apprentices in many trades. This photograph depicts a trainee engaged in cutting the screw thread on saddle traversing screw of 5 inch centre lathe.This is a high quality professional photograph taken circa 1940. In 1938-1940, CTS was part of the Unemployed Youth Training scheme. This photograph is a visual record of this scheme.Black and white photograph mounted on brown card. Caption pasted on back of photograph.Caption: Collingwood Technical School. / Unemployed Youth Training Scheme 1938-1940. / Trainee engaged in cutting the screw thread / on saddle traversing screw of 5 inch centre lathe. collingwood technical school, cts, unemplyed youth training scheme, apprentices, students, lathes, nmit,

This white cane consists of three wooden parts that screw into each other to form the straight cane. The top section has grooves to indicate the top of the cane as well as a hole, through which the user could attach a rope or elastic cord to ensure the cane stayed in hand.3 pieces with screw connections that form a white caneorientation and mobility, equipment

Ink on paper technical drawing for screw jack technical drawing, screw jack

Corroded screw with circular narrowing to a pointed tip. Incised screw grooves extending down the body of the shaft. Incised notch extending across the nail head.archaeology, historic building, former royal mint

Two corroded screws with circular narrowing to a pointed tip. Incised screw grooves extending down the body of the shaft. Incised notch extending across the nail head.archaeology, historic building, former royal mint

Three corroded screws with circular narrowing to a pointed tip. Incised screw grooves extending down the body of the shaft. Incised notch extending across the nail head.archaeology, historic building, former royal mint

Corroded screw with groves extending down the body of the shaftarchaeology, historic building, former royal mint

Corroded screw with grooves and a circular shaft narrowing to a pointed tip.archaeology, historic building, former royal mint

This corkscrew has obviously been used as a promotional handout for clients of James McGee and Co. Information on this firm has been difficult to find but there was a well-known commercial traveller, James McGee, resident in the Warrnambool district at the end of the 19th century and it is known that his sons headed a company, James McGee and Co. that bought Sheldrick’s New Brewery in Timor Street, Warrnambool, in 1894. This brewery had been founded in 1868. In 1922 the McGee company sold the goodwill of the Warrnambool brewery to the Ballarat, Melbourne Co-Operative and Carlton and United Breweries and the local brewery closed. No information has been found on Ballangarrock Whisky.This corkscrew is an important souvenir of the last few years of operations at the Warrnambool New Brewery in Timor Street. This business had operated in Warrnambool for over 50 years.This is a metal corkscrew with a wooden handle. There is black printing on the handle. This printing is faded in parts. The metal screw is rusty.‘Jas. W. McGee & Co. Importers Warrnambool’ ‘Drink Ballangarrock Whisky’ james mcgee & co., history of warrnambool

Glass screw top bottle used at the Ballarat School of Mines for Chemistry classes. ..2) Glass flask with measuring increments by Trubor chemistry, laboratory, scientific instruments, glass flasks, beakers, bottle, trubor

Screw metal with thread at one end & rounded at other end with a hole. Piece of wire is attached to thread. 148mmLflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

The photograph is part of a series of five, depicting the Ariston in dry docks in Hoboken, New jersey, on the 26th of August, 1947. This photograph shows the propeller screws of the ship.This is a photograph from the Allan Charles Quinn collection which is a collection of letters and photograph depicting aspects of life at sea for a young man in the era immediately following World War II.A black and white photograph showing one of the propeller screws of the Ariston while in dry dock.Handwritten in black ink on the reverse: SCREWS OF ARISTON / 26.8.47 / D (handwritten in pencil). There is also a small blue ink mark in the bottom right hand corner.allan-quinn, photograph, dry-docks, hoboken, new-jersey, propeller-screws, ariston

Metal with rotating metal handle to raise and lower load, handle 19mm longjack, screw jack, marine

This Screw brand knife, made by Charles Taylors (Sheffield Tools) Ltd in England, was used in the making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This knife is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This knife was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Modelling knife; metal blade set into a turned wooden handle. The blade has been deliberately shaped to a 45 degree angle. Label on the handle, ‘Screw’ brand, made by Charles Taylors (Sheffield Tools) Ltd. of England. It has a logo of a screw within an oval. This knife is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. label “SCREW brand”, logo of a screw within an oval, “SUPERIOR QUALITY”, CHARLES TAYLORS” (“SHEFFIELD TOOLS LTD.)”, “ENGLAND”flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, modelling knife, charles taylors (sheffield tools) ltd of england, screw brand knife, sovereign of the sea, ship model, hobby, ship model tool, tool

A selection of Nettlefolds - Parker-Kalon Self-Tapping & Hammer Drive Screws mounted in a picture frameNettlefolds - Parker-Kalon|Hardened Self-Tapping Screws and Hammer Drive Screws|Guest Keen & Nettlefolds (Midlands) Ltd Birminghamnettlefolds, ballarat road, sunshine north