Standard pattern WW2 steel helmet as worn by Australian forces from 1940 until 1950s. Replaced by US Pattern M1 steel helmet.Completely original WW2 Australian helmet Australian MkII raw edge steel helmet with MkII linseed oil fabric liner. Webbing chinstrap with steel springs. Moulded rubber crown pad. MkIII chinstrap securing lugs. Exterior painted chocolate brown.Lugs dated 1942steel helmet

Vietnam eraM1 steel helmet used by the United States military from WWII to 1985. Painted textured finish light olive green. The rim edge has a crimped metal band running around it, with a rear seam. Mounted on each side of the helmet there are D shaped swiveled metal loops for a chinstrap. The adjustable chinstrap is made of olive drap coloured nylon webbing with blackened metal clips. A two pice clip system metal fastener is used to connect the two pieces of the chinstrap.On the inside of the helmet is written in black textra the name MORCOM, No 37019, and 1966-67.helmet, headgear

From 1936, the Australians began to explore the feasibility of local production of steel helmets. Actual production by the Commonwealth Steel Company (in conjunction with Lysaghts) began in 1939. Made of manganese steel, it weighed about 1.1kg. Due to lack of machinery to bend manganese steel strip, the helmets were produced with a raw, but bevelled, edge. Almost two million helmet bodies were produced. Australian helmets were painted in sand textured Australian Army Khaki-Green No.3. A wide-meshed knotted net was often worn. The chin-strap was a copy of the British Mk.II. it was made with cloth covered springs and webbing.Green steel helmet with 8/7th RVR colour patch on each side

Steel helmet based on a design by John Leopold Brodie (1873–1945) was introduced in September 1915 to British troops on the Western Front and with some modifications became standard issue to British Commonwealth troops during World Wars One and Two.helmet, steel, tin hat, wwi, wwii, world war one, world war two

U.S. M1 Steel Helmet post WWIISteel with green painted surface of sand & paint with welded rim. Two cotton webbing chin straps with metal bucklesOn front of helmet reads SMILEYu.s. m1, steel helmet

Circa. 1940Steel inside completeLetter ( W ). printed on front of helmet.world war two, second world war, ww2, steel helmet, warden helmet, warden

Olive Green Steel Helmet, RBR PasgtDate July 2000, Lot No 3664, made by RBR International Ltd, Made in the UK

Steel helmet with incomplete chin strap, British patternmilitary equipment, army, headwear, steel

British pattern steel helmet with leather insert & webbing chin strap.military equipment - army, costume - male - headwear, metalcraft - steel

protective equipment worn by soldiers US M1 style Steel helmet with liner and green and black scrim net cover. 5/6 rvr, helmet, ww2, vietnam, army

WW1 historical significance.German Army Helmet from WW1. First pattern M16 Steel Helmet WW1.

Steel Helmet missing the liner. Sprung canvas chin strap. With dark green mesh camo cover. Stamped inside 1 - 54 L R

Green British pattern steel helmet with "button top" This helmet shows multiple shrapnel dents and one penetration.

US M1 Steel helmet with the writing "Current Coy Tightarse" written to the front. The pint has started to peal off

Steel helmet, painted khaki colour with white coloured paint on the brim, etched mark on the inside of the brim. There is no chin strap or liner.Etched mark on the brim crown, “8”steel helmets, british pattern

The item was worn by an S DUNLOP 2/4th Batt AIF.Steel Helmet, painted khaki colour, khaki coloured cotton webbing chin strap, liner is leather and canvas, size 7.On inner liner in black print, “DUNLOP/7/2/4”steel helmets, headwear,

Typical of German Steel Helmets from 1942 onward.Reproduction German M42 double decal Steel Helmet with 9 tongue leather liner and drawstring but missing its chinstrap. It is painted to represent usage by the Africa Korps in North Africa 1941-1943.57 61m42, stahlhelm, world war two, ww2, second world war, nazi germany, german helmet, tri-colour shield

Item possibly worn by Alwyn Nelson VX84213 (Bombadier)Steel helmet, painted khaki colour, liner, black coloured coated canvas, rubber padding on crown, etched label on chinstrap holder.On chin strap holder “MK 111/1941”steel helmets, headwear

Standard issue item as used by Australian servicemen during the conflict in Vietnam.M1 Steel helmet. Khaki green metal outer steel shell with leather chinstrap and a green board helmet inner/ liner with headband.On inner: Buttfell 6101324 On outer: Fullerton 219911vietnam, uniform, helmet, m1

Steel helmet, painted blackish colour, khaki coloured cotton webbing and fabric chin strap. Liner, black coloure coated canvas with rubber padding on the crown, brass flat buckle on chin strap.Etched on the chin strap holder, “MK 111/1942”steel helmets, headwear

British Steel Helmet modified from the similarly shaped Mk III and introduced in 1945. It was Britain's last metal helmet and was replaced by the fibre Mk VI helmet in 1985. British MkIV Steel Helmet with Lift-the-Dot liner attachment. Painted khaki Green with stainless steel rim. Turtle sheel shape and elasticated web chinstrap. Most of liner is missing.Inside Stamped: RO&CO FT 4 1945 (1945 stamp below figure 4)

WWII Historical significance. The Brodie helmet is steel combat helmet designed and patented in London in 1915 by Latvian inventor John Leopold Brodie. Colloquially called the " shrapnel helmet " or the " Tommy helmet ".WW11 Air Warden's helmet. Known as Brodie Helmet.Helmet has a black 'W' painted on the front and rear

Circa WWII type 92 Japanese steel helmetCirca WWII japanese type 92 steel helmetWWII Japanese steel helmet, Type 92, painted silver post-war. A five point star is soldered to the front. There are four small holes (two on either side) in the top of the helmet. A circular metal stud is located on either side of the helmet at the rear. Three liner mounting attachment points are located on the inside rim of the helmet. The rim of the helmet is cracked in two places.helmet, japanese, headgear

Steel Helmet, Model "M1916"ET6 (small indented stamp inside near rim). Indicates manufactured by Eisenhuth Werke Thale (spelling?)

Background unknownThis helmet although manufactured in WW2, is an almost identical style to the WW1 helmet worn by soldiers of the 4th Light Horse in France and Belgium.helmet steel british, helmet steel british

American style helmet used by the Australian Army.Helmet, steel with fibreglass lining, leather band & green webbing on inside of lining. Green material chin strap secured with metal buckle. Helmet covered with strips of camouflage material & hessian.Inside: “WHI869 Cat No 8415.50.758.5792”uniforms - army, costume - male headwear, trades-leatherworking

German Army WW2 steel helmet (M42). Was the last version of German helmet to be upgraded during the War.Steel helmet

British pattern steel army helmet as used in both WW1 and WW2. This example dates from the WW2 era.British pattern steel helmet, dark olive in colour. Outside of the helmet is covered in dark olive green mesh which is secured with olive green cotton cord. A bolt head is prominent on the crown of the helmet and corresponds to a nut and thread on the inside. This nut and bolt secures a black rubber pad. A sweat band in black synthetic material is secured to the inside rim of the helmet. An adjustable webbing chin strap with brass buckle is attached with clips to each side.Niluniform - army, costume - male, protective headgear

U.S pattern steel helmet with material fibre glass liner, cotton webbing chin strap & leather headband.The liner has a large black blotch as if name & number have been blanked out.uniforms - army, costume - male - headwear, passchendaele barracks trust