Semi straight infant Macintosh blade with light bulb only. The item has a general good conservation and completeness regarding its hinge piece and base bulb connector. It has stamped the manufacturer name (PENLON) and the place where it was made (New Zealand).Stamped, REGD TRADE MARK / PENLON / MADE IN NEW ZEALANDpenlon, macintosh, straight laryngoscope, infant, blade, laryngoscope, new zealand

Magill straight laryngoscope blade with tubular space for a light bulb connection (no light bulb is present). It is a PENLON piece, made in England. Size 1, for infant use. Has a slight yellowish discolouration over its base. General scratches around the base of the blade and a sticky old mark bellow an engraved inscription. It has engraved the name of the hospital where it came from and the initials of its owner.Engraved under the blade arm base the name, Royal Childrens Hospital Engraved in its lateral side attachment base piece the initials, D. A. Stamped at the back of the attachment base piece the type and size, MAGILL / 1 Stamped in its lateral side attachment base piece the trademark name and its made place, REG [is not visible the continuation] / PENLON / MADE IN ENGLANDmagill, blade, royal childrens hospital, metal, d.a.

A Soper straight laryngoscope blade adult size with bulb only. The blade has minor scratches over its surface and below the arm's blade because of its use. Presence of an old sticky tape mark under the blade. The contact stud at the base of the blade is worn. The end of the blade has a perforated line as part of its design. The metallic base of the light bulb has an oxide spot on it. No inscriptions. No inscriptionssoper, laryngoscope, blade, adult, light bulb

Ivan Magill (1888-1986) designer, this piece was designed in 1926 along with other anaesthetic equipment.Chrome plated straight complete Magill laryngoscope in medium size format, with attached light bulb. Cylindrical handle for battery deposit and with a wavy hand grip for easy handling. Serrated and screwed lids on top and base of the handle grip for insertion of batteries and checking of electrical contact stud. The handle also has a metallic switch without any instruction of use. The arm of the handle has a detachable screw to adjust extendable blade position and firmness. The light bulb is attached to a metallic tube connector to the handle arm which is just pressed to the contact point base. The blade has a oxidation spot under the blade. The piece in full has several scratches marks mostly founded in handle, arm and top blade areas. Two stamped inscriptions are present on the arm area, the manufacturer name and register number.Stamped on the arm of the handle lateral side, A.CHARLES KING Stamped on the arm of the handle opposite lateral side, REG. NO. 74901[9]magill, a. charles king ltd, regi. no. 749019, switch, laryngoscope

Designed by Dr Paluel Flagg around 1915 and later used for 25 years. This laryngoscope blade was designed to meet certain expectations about laryngeal richness and to avoid major tracheal injuries in patients. (Ball, 2014) Article reference: C. M. Ball & R. N. Westhorpe. 2014. Anaesthesia & Intensive Care. Nov 2014, Vol. 42 Issue 6, p687-688. 2p.Complete laryngoscope used by Dr Lennard Travers. Medium sized Flagg straight blade with a slight curve at the distal end and a 'U' shape canal. The handle has a serrated grip for easy use and it is also a container for two batteries, it has a switch on its base. The full piece has visible and deep scratches over the top of blade around the stamped blade type inscription. The base of the blade has a worn surface with a slight discolouration due its use. No presence of led light bulb on blade. Minor scratches on handle base battery deposit with an ON - OFF switch black button. Stamped on blade, FLAGG LARYNGOSCOPE Stamped on top handle blade base, AUBURN, [W/A seal], N.Y.U.S.A. Stamped on the handle base power source button, ON [red colour], OFF [blue colour]flagg, laryngoscope, flagg blade, button, battery handle, straight blade

Designed by Dr Paluel Flagg around 1915 and later used for 25 years. This laryngoscope blade was designed to meet certain expectations about laryngeal richness and to avoid major tracheal injuries in patients. (Ball, 2014) Article reference: C. M. Ball & R. N. Westhorpe. 2014. Anaesthesia & Intensive Care. Nov 2014, Vol. 42 Issue 6, p687-688. 2p.Small sized Flagg straight blade with a slight curve at the distal end and a 'U' shape canal with light bulb attached. The piece has a general excellent condition and brightness over its surface. The laryngoscope blade type is stamped on top of the blade and the manufacturer seal is located at the base back side of the blade. Stamped on top of the blade, FLAGG LARYNGOSCOPE Stamped seal at the base back side, W/A [inside a triangle shape]flagg, light bulb, straight blade, welch allyn company (wa)

Magill's laryngoscope with open straight blade and flat round speculum and a detachable light bulb connector, the bulb is missing. This laryngoscope is a previous version of the battery use ones conceived around 1920 therefore circa 1900. The design of the handle is similar to the Shipway laryngoscopes with a curved and pointed end and anatomical handle grip. The blade attachment place seems to be an adaptation to this kind of blade which differs from original models. The piece has several scratches and deep hit marks, as well as oxidation spots mostly around the internal canal of the blade. There is presence of resin residues on some surfaces. A visible different kind of metal was used at the blade base attachment place and for the light bulb connector. Engraved on handle its model type and in the arm of the handle a possible manufacturer name (illegible) and the place where it was made.Engraved at the handle, MAGILL'S LARYNGOSCOPE. Stamped at the arm of the handle back side, STAINLESS STEEL Stamped at the arm of the handle front side, A[not understandable text might be Allen & Hanburys Ltd.] / LONDON / JZmagill, ivan, laryngoscope, 1900, resin, shipway, light bulb, magill laryngoscope

Shipway’s metallic medium size laryngoscope with bulbous curved handle. The section connecting the handle to the straight blade has a screw. Lateral orifice to attached light bulb connection which is not present on this item. The surface is very rusty and quite battered, presence of oxidation on its surface and discoloration of the metal. Has an inscription about the manufacturer.Stamped on its handle, MAYER & Co. LONDONshipway laryngoscope, laryngoscope, metal, mayer & co. london

A laryngoscope is an instrument used to view the larynx (voice box), which is the opening to the trachea and lungs. It consists of a “blade,” which goes into the patient’s mouth, and a handle. Prior to 1943 when Macintosh introduced his curved blade, most laryngoscope blades were long and straight. The straight blades were used to directly hold the epiglottis. Macintosh’s curved blade works differently: it indirectly opens the epiglottis by applying pressure to a space between the root of the tongue and epiglottis, called the vallecula. The flange running along the left lower edge of Macintosh’s blade was also a novel innovation. It was designed to move the tongue to the side, which improved the view of the larynx and made more room for a breathing tube. The Macintosh Laryngoscope remains one of the most popular blades worldwide. (Source: Wood Library Museum) This laryngoscope was previously owned by John Mainland, as evidenced by the name etched into the handle. Mainland graduated from the University of Melbourne in 1950 with a Bachelor of Science degree. After researching and completing his medical degree, Mainland entered into the field of anaesthetics, training at the Royal Women's and Royal Children's Hospitals, later Alfred Hospital, in 1959. He completed training in 1964 and remained at the Alfred Hospital. During his career, he also became the first anaesthetist appointed to the position of Professor in Victoria. His other achievements include manufacturing a respiratory monitoring module that accompanied astronauts on the United States moon landing and developing a stimulator to lessen the risk of deep vein thrombosis in surgical patients. Mainland became a Fellow of the Australian and New Zealand College of Anaesthetists in 1992, retiring from the profession in 1997.Oblong shaped handle with textured grip. Attached is a laryngoscope blade in a cruved shaped with light tube running through one side.Etched into top of handle: J.F. MAINLAND •Stamped into top of handle: REGD TRADE MARK / PENLON / MADE IN ENGLAND •Stamped into base of handle: CLOSE [arrow] •Etched into base of blade: MAC / 4 •Stamped into side of blade: REGD TRADE MARK / PENLON / MADE IN ENGLAND •Stamped into side of blade: STAINLESSmacintosh, robert reynolds, new zealand, laryngoscope, mainland, john, alfred hospital, moon landing