This brass bell bracket has been carefully shaped to fit around the shape of a bell. Its fitting allows it to swing freely. The bracket allows the bell to be fixed to a horizontal surface such as a s wooden frame, post or base. It may have been portable or fixed to a counter, desk or table. The bell may have been used to sound the time, to draw attention to an event such as a church surface, to signal a time to start or stop, or even as a percussion instrument.This metal bell bracket appears to be handmade and may have been used as a portable signal for a school or public meeting. It could have been used on a ship to signal the watch or the time.Bell bracket; the brass, bracket is bell-shaped with a removable hinged section across the top where the bell swung. The base is composed of a curved and shaped base stand. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bell bracket, bell stand, bell frame, swinging bell, portable bell, bell ringing, signal

Five swinging bells were installed at Sacred Heart Cathedral in September 2001 and were rung for the first time 30/9/2001. The cast bronze bells were made in France and their eventual size and tones were decided based on the size of the belfry. The bells are each named after a saint; St Liborius, St Augustine, St Patrick, Mother of Good Counsel, and Blessed Mary McKillop.Newspaper article from 2001 written by Monsignor John Duffus, Sacred Heart Cathedral. Bells chime for Angelus: In September, five bells were blessed and installed in the tower of the Sacred Heart Cathedral to mark the centenary of the opening of the nave in 1901. There is a photo at the bottom of the bells being blessed at the Sacred Heart Cathedral. The clip is in a folder.newspaper, bendigo, the bendigo advertiser