Department of Health – National Fitness Office (Sports & Recreation) – Historical Press Release Photo - Empire Youth Day & Royals on Tour CollectionDepartment of Health – National Fitness Office (Sports & Recreation) – Historical Press Release Photo - Empire Youth Day & Royals on Tour Collection

A Boeing 707 from the United States of America is on the tarmac at Melbourne Airport with people awaiting thee arrival of the Vice-president of the United States of America, George Bush. A Ford Fairlane car with the driver waits to drive the president and his party when they leave the airport.A photograph of an aeroplane with a car parked on the tarmac.aircraft, automobiles, councillors, politicians, bush, george, premier of victoria, john cain, armstrong, lindsay douglas, kelly, john, shire of bulla, united states of america, george evans collection

Bunny II was built by Australian Army air corps personnel from the 161 Possums using salvaged parts in Vung Tau, Vietnam, in 1970. Dating back to the 1950s, the bunny design on the tail of an aircraft has come to represent the tradition and spirit of Naval Aviation.Colored photograph in a black frame. In the foreground on the tarmac is a small black plane with 161 in red near the nose. There is a white strip down the side of the plane. Also has an image of a white bunny on the tail of the plane. The rotors also have a white tip on them. Behind the plane is a truck with a soldier in it. There is a small hill in the background. On the bottom of the photograph reads Bunny 11.Bunny 11/ 161/white bunny on tail. plane, truck, tarmac, white bunny, bunny 11, 161 recce, birddog, cessna, bird dog, navy aircraft

Melbourne Airport was built at Tullamarine during the second half of the 1960s and was officially opened in 1970.A black and white photograph of the terminal at Melbourne Airport with two airliners on the tarmac. They are Qantas and Pan American Boeing 707s.melbourne airport, airports, qantas airlines, pan american airlines, commonwealth of australia, department of civil aviation: printing and publication centre, george evans collection

50th Anniversary of Mt Gambier-Melbourne flight, Feb. 1917 (Cherokee aircraft at Essendon Airport), Re-enactment of flight by pilot John Hardingham. A. Cherokee aircraft on tarmac, on back b. Cherokee aircraft with Mrs V I Perkin (Basil's sister), Mr Luscombe (PMG Department) and a mailbag sitting on tarmac. Handwritten ID on backs plus PMG stamp with negative ID number, V1867/2person, individual, basil watson

Colour phorograph in light timber frame of Caribou on tarmac. Ten helicopters flying overhead (in formation). 20+ persons observing on either the rooftop of adjoining building or around the Caribou.caribou, photograph

Black and white photo in light wood timber frame showing a group of persons (14+), Military and civilian, gathered under rear of Caribou. Luggage on tarmac. Flying Kangaroo insignia on aircraft.caribou, transport, photograph

Part of the Bennetts Collection. See Catalogue No. 9726P for details of service for "Alva Marie Bennetts"Black and white photograph of a large propellor powered aeroplane. Aircraft ground crew visible on tarmac. Four jeeps visible in background. Photograph has a white border which has been trimmed with pinking shears.handwritten on back in black ink: American "Flying Fortress".bennetts collection, alva bennetts, flying fortress, boeing b17.

Series of fifteen Photograph all of Squandron leader Alan R. Reed relating to his time and service in vietnam from 1968-69. Includes head shots, group gatherings and on the tarmac. One of his DFC Award presented by USAphotograph, alan reed

This photograph was taken around 1958.Scanned from a coloured slideView from this sidepapua new guinea, papuans, qantas terminal, port moresby, qantas, plane, tarmac

Laminated coloured regimental photograph of an army contingent featuring 500 servicemen and women in Disruptive Pattern Camouflage Uniform (DPCU) sitting and standing on a tarmac, taken at the Somali Military Head Quarters. On the right side of the photograph is an image of the Australian Active Service Medal (AASM) and on the left is an image of the unit citation badge (both would have been awarded to the individuals in the photograph). Below and centre of the photograph - In text: Australian Forces Somalia / 24 Dec 92 / 11 May 93 / HQ AFS / 1 RAR BN GP / 1 RAR ** B SQN 3/4 CAV REGT RAAC ** COMD OBSN LIAISON GP 107 FD BTY 4 FD REGT RAA / 17 FD TP 3CER RAE ** DET 103 SIG SQN ** 1 BSG 3BASB ** DET 1 DIV INT COY / Below and left side of photograph - In cursive: ARCH FRALEY PHOTO peace keeping, somalia, hq afs 1 rar bngp

The Lister Auto-Truck was a small monowheel tractor built for moving light loads around factories, railway yards and similar sites. They were built by R A Lister and Company of Dursley, Gloucestershire, well known for their range of small stationary engines The Auto-Truck was one of several monowheel tractors to appear in the 1920s and '30s, with the availability of small, reliable petrol engines, as developed for motorcycles and the stationary engines for which Lister were already known. These were tricycle vehicles, with the single leading wheel used for both drive and steering. Their simple construction carried most of the mechanism on this wheel as a single unit, the chassis with the trailing wheels being little more than a trailer for balance. Simplicity was a key feature. The engines were single-cylinder and air-cooled. Ignition was by magneto, rather than requiring a battery and electrical system. One of these designs was produced in the 1920s by George Grist of the Auto Mower Co., Norton St Philip, Somerset. The engine was a JAP 600 cc four-stroke air-cooled sidevalve, a typical small engine of the time. The Auto Mower Co. were Lister agents and when Lister heard of this 'Auto-Truck' they bought one for use in their own factory. It was used to carry heavy engine castings from the foundry to the machine shop. Lister customers saw them and there was such interest in wanting to buy them that Lister negotiated with Auto Mower to build them under licence. Although Lister were already well known for their small petrol stationary engines, these were heavy cast-iron engines with water hopper cooling and unsuitable for vehicle use. Lister remained with the JAP engine for the Auto-Truck. The Auto-Truck was designed for use in factories or other places with smooth surfaces of concrete or tarmac. This allowed the use of small solid-tyred wheels with only simple suspension, making the vehicle simple, cheap and lightweight. They had little ability on soft surfaces though and could even topple over if driven carelessly across slopes. Their design was a compromise between the top-heavy nature of the tall engine grouping above its wheel and a well thought-out chassis for stability. The bearing between them was a large diameter ring roller bearing, mounted at the lowest part of the chassis. This gave rigidity and stability, even after long wear. A ring of rolled channel girder was attached to the engine group and rollers on the chassis carried the load upon this. On early Auto-Trucks this bearing is set very low, in line with the chassis members, and is covered by thin steel plates. The front panel of the engine cover is distinctive with large ventilation holes and a Lister signature cut through it. Strangely this panel is made of thick cast iron, providing substantial weight high on the engine and only adding to its top heaviness. To improve visibility of moving vehicles in noisy factories, this panel was often painted white, the rest of the vehicle being Lister's usual brunswick green. The driver was seated on a Brooks bicycle saddle, which in recognition of the lack of vehicle suspension, was carried on the end of a cantilevered bar that acted as a leaf spring. A wide handlebar on the engine group was used for steering. A squeeze bar the width of this handlebar engaged the clutch. Controls included a hand throttle, a gear lever with two forward and one reverse gears, and a large handbrake lever. The engine unit rotated freely for a full 360° rotation. When used in reverse, the Auto-Truck could either be driven from the saddle, looking backwards over the driver's shoulder; or they could dismount, swivel the engine unit around and control it as a pedestrian-controlled truck from behind. Under the engine cover were two equal diameter tanks, a fuel tank for petrol and a shorter oil tank. Engine and chain-drive lubrication used a total-loss oil system, controlled by a small pump and needle valve. Info Ref: Lister Auto-Truck - Wikipedia https://en.wikipedia.org/wiki/Lister_Auto-TruckHistoric - Industrial monowheel tractor for moving light loads around factories, railway yards and similar sites.The Lister Auto-Truck - small monowheel tractor Made of steel with three wheels. Powered by a J.A.P single cylinder petrol motor which is Hand Cranked to start.Lister puffing billy, lister, lister auto truck, monowheel tractor

non-fiction“King of the Weir” documents motorcycle racing in the Albury Wodonga region which has a rich history dating back to the 1920’s when speedway was king. Speedway gave way to scrambles, and then tarmac racing on aerodromes, army bases and circuits. The Hume Weir circuit held the “King of the Weir” race for ten years attracting such riders as Ron Toombs, Greg Hansford, Murray and Jeff Sayle, and Kenny Blake. Overseas champions Jim Redman, Tom Phillis, Geoff Duke, Bill Lomas and Dickie Dale came to do battle with the locals in the 50’s and 60’s.hume weir circuit, albury-wodonga motorcycle club, motorcycle racing, motor sports albury