Large Union Jack flag with wooden toggles attached by thin rope.flag, union jack, jerusalem, toggles, rope

Traditionally, a bow saw is a woodworking tool used for straight or curved cuts. A bow saw is a type of frame saw. Its thin blade is held in tension by a frame. In English and American vocabulary it denotes a toothed blade suspended between two long narrow handles called "cheeks" that are supported and separated by a thin stretcher in the centre of the handles, making a wide H shape (the cheeks form the uprights of the H, the stretcher the crossbar of the H). The blade is kept in tension with a turnbuckle or a twisted cord that runs parallel to the blade between the two cheeks but on the opposite side of the stretcher. If a cord is used, the cord is twisted with a toggle attached to one loop of the cord, adding tension. The toggle hits the stretcher, which keeps the cord from untwisting. A finer version of the saw uses a narrow blade (1/4" or less) with handles that allow the user to hold the saw and turn the blade. In this context it is also known as a turning saw[2] which is larger than a coping saw.Early settlers in Moorabbin Shire had to be self reliant and made their own clothes, tools and equipment as they established their market gardens and farms. A wooden Bow saw with tensioning string, toggle and bladetools, woodwork, metalwork, carpentry, pioneers, market gardeners, early settlers, moorabbin, cheltenham, bentleigh, ormond

During the desert campaign in World War One (1914-1918) when grazing was non existent the horses began eating their neck ropes as a substitute. As a result the ropes were replaced with the British cavalry neck chain. The links are for securing the toggle piece when it was around the horses neck whilst being ridden. When the rider dismounted he would unlink the chain and use it as the horses lead chain. It was also used to tether the horse. It is doubtful if the chains were ever issued to light horse in Australia so it is likely this chain was brought home from the Middle East after the war.Rare relic of the Middle East campaign during World War One (1914-1918).Chain with loop om one end, toggle on the other and two intermediate plates with a cross shaped hole punched through them.military, chain, horse, desert campaign, wwi (1914-1918), cavalry

Aircraft parts reputed to be part of the aircraft used by Baron Von Richtoven (Red Baron). metal part for tightening wing struts 4 of double toggle NA4963. 2. (x1) wooden pulley from wing NA4963 3. Pistol Bullet Spent NA4963metal part fro tightening wing struts 4 of double toggle NA4963 1-4 2. (x1) wooden pulley from wing NA4963.5 3/- Pistol Bullet Spent NA4963.6

Toggle ropeequipment, vietnam, army

Toggle Rope Greenequipment, vietnam, army

Infantry Toggle Ropeequipment, 1970, army

General purpose utility rope, green, known as a toggle rope.military history - equipment, toggle, rope

Bow saw wooden frame and blade tensioned by a twisted cord and toggle stick. Blade has 8 points per inch. Toggle not original. 1710.1, 1710.2 & 1710.3-3 parts of itemflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bow saw

Made by internee Emil Hottelmann at Camp 3 for his wife.Ladies macramé clutch bag with wooden toggle in colours black, yellow & cream.tatura, handcrafts, macrame, sieglinde melton, sieglinde hottelmann

Harpoon, Toggle Headed Harpoon, wooden handle and Toggle spear-head, which opened to a perpendicular angle after entering whale. Spear fitted into handle and bound with twine. Handle is tapered at throwing end and where spear meets handle.flagstaff hill, warrnambool, shipwrecked-coast, shipwreck-coast, harpoon, toggle headed harpoon, whaling, whaling harpoon

Rope used to lay horse lines in Light Horse encampmentTwo metre sisal rope with wooden toggle on one end and metal ring on other end. light horse, rope

In the Vietnam conflict, Australian troops used these ropes at night and crossing rivers to assist in keeping soldiers together. They were also used with wooden poles when making stretchers in the field and to secure prisoners.Green fibre rope assembly, single leg, polyester toggle rope. Rope is coiled with a loop at both ends.toggle rope, vietnam war, military equipment, rope, vietnam

Not KnownA round cylinder of wood and brass with small handle/toggle on side and side outlet. All three are bayonet fittingsNonelighting, electric

Satchel with camouflage pattern, three plastic lock-in clips on front, three black clips on back and one toggle in front. Internal inscription reads, 8465-66-139-4069, SOS, JAN 95sachtel, camouflage, january, 1995

Started in 1936, the aim of the Pilots was to capture the imagination and the devotion of children for the service of the Kingdom of God and to begin the training for membership of the world wide church of Jesus Christ. Pilots was mainly a week-night activity to supplement the training which boys and girls are given on Sundays, either through Family Church courses or approved Sunday School guides. Many churches were already using the lesson courses prepared by the Youth and Education Department of the Congregational Union for the Family Church. A Pilot company consisting of six or more boys meet regularly under the leadership of a Captain. The Pilot's promise was "I will learn, pray and serve all I can in the world-wide church of Jesus Christ". [from "Compass : for Pilot Captains" book 1947]BN057 and BN004: Rectangular blue and green screen printed cream linen flag with cord and wood toggle at one sidePILOTScongregational church, pilots - congregational church, flags, congregational union, london missionary society

Peter Skandale 412263 .1) Jacket- waterproof polyester/nylon camouflage, lined .2) Jacket - waterproof plastic, camouflage, draw in toggles on lower edge army equipment, jacket waterproof

Cloth Hat Disruptive Pattern Camouflage Hat Reinforced Rim Cloth Band Around Rim Green Cord with toggle to secure hat on headWhite Tag Inside SOS Marine DEC 2000

Union Jack made in 1985 and possibly once in the possession of Peter Wilson.A Union Jack that was once in the possession of Peter Wilson.Union Jack, oblong red white and blue, cloth, three metal eyelets on the white edge band, two brass toggles for hanging the flag onto a flagpost.On the white edge band the makers name, stock number 8834-99-5714529 6BDTH 1985, an upwards arrow in a circle and in black ink the name Peter Wilson.flag, union jack, united kingdom.

This photograph frame with its decorative dragon and bamboo shoots was typical of the early 1900's when photography was in the hands of the professional artist. It was in a period before the "instant" photo and required a dark room and processing liquids for development. It was therefor in a time when photographs were "shot" only at important events, be they family or public occasions. Good quality picture frames such as this item were a part of the "reverence" of photographs per se.This photograph frame holds and protects, part of a very significant occasion, the 90th birthday photograph of the matriarch of one of the founding families within the Kiewa Valley. The frame therefore has historical significance.This silver painted aluminium photograph frame has a glass front pane within a formed inlay and a formed inlay at the back. The anchor points, at the back, for securing toggles are in place but not the toggles. These toggles were installed to allow the photograph to be securely positioned within the correct alignment of the the frame.The metal front plate has seven rivets holding the cloth covered cardboard back frame to the metal front cover. The front part of the frame has sculptured dragon and wild bamboo shoots and is boarded with a plain border pattern. The back panel to secure the photo and hold the stabiliser flap is missing. See also KVHS 0092 for a more complete frame.photograph frame early 1900's, the roper family

British Red Ensign. Red flag with Union Jack in the left hand top corner. Rope threaded through placket on left side of flag with toggle on one end.Tom Wright Captain O.M. Watts Ltd London W1military history, navy, flags, maritime

A harpoon is a long spear-like instrument used in fishing, whaling, sealing and other marine hunting to catch large fish or marine mammals such as whales. It accomplishes this task by impaling the target animal and securing it with barb or toggling claws, allowing the fishermen to use a rope or chain attached to the projectile to catch the animal. The earliest known harpoons, have been recorded as having been made and used 90,000 years ago. In the early whaling industry the two flue harpoon was the primary weapon used around the world. This two fluke harpoon tended to penetrate no deeper than the soft outer layer of a whales blubber. Thus it was often possible for the whale to escape by struggling or swimming away forcefully enough to pull the shallowly embedded barbs out backwards. This flaw was corrected in the early nineteenth century with the creation of the one fluke harpoon. By removing one of the flukes, the head of the harpoon was narrowed, making it easier for it to penetrate deep enough to hold fast. In the Arctic, the indigenous people used the more advanced toggling harpoon design and by the mid-19th century, the toggling harpoon was adapted by Lewis Temple, using iron. The Temple toggle was widely used, and quickly came to dominate the whaling industry around the world.A hand forged harpoon demonstrating the blacksmiths art for fashioning an item used during the early 19th century in the significant industry of whaling. Used during a time when the world depended on the natural resources derived from whales, oil for lighting, lubrication, margarine, candles, soaps and cosmetics as well as the use of the whales bones for various other items such as corsets, umbrellas,fertiliser and animal feed. The item is significant as it was probably made between 1820-1850 after which a single fluke and toggle harpoon began to be use extensively in the whaling industry. Also coming in to general use was a black powder gun to fire the harpoon rather than the early type that had to be manually thrown by a mariner from a row boat of which the subject item is an example.Hand forged double fluke steel whaling harpoon with an arrowhead tip atop a square shank that tapers to a narrow round shaft with a split metal cone to accommodate a wooden harpoon pole.Noneharpoon, whaling, whaling harpoon, fishing industry, whales, flukes, lewis temple, marine technology, flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road

The Display Board of Konts was handmade in Kings Lynn, Devon, England, by Tom Long DSM, who is a member of the International Guild of Knot Tyers. This display board shows the knots and joins used in ropework performed by a sailmaker and other skilled ropeworkers. It demonstrates the uses of some of the knots, such as for knobs and handles, suspending lengths of wood, reinforcing spliced rope and even for decorative work. The sailmakers travelling as part of the ship’s crew stored their tool kit in a canvas ditty bag. It contained needles, awls, a sailmaker’s leather palmed glove with a heavily reinforced palm - a shuttle to mend and make nets, fids, knives, mallets, brushes, rulers, and rope gauges. Sailmakers used their ropework and knot-making skills for various purposes and chose the type of rope fibre for its particular properties. For example, Italian hemp rope was preferred for the light line used in shore-to-ship rescues because it was lightweight, not easily knotted, and absorbed less water. A supply of various types of rope was a commodity on board a ship and on land in the new colonies. It was flexible, easily stored, and could be worked to create an endless variety of objects on its own or with other materials like wood. An example is a simple rope ladder. Lengths could be combined to make various thicknesses and pieces could be skilfully joined together by splicing. The importance of knots in seafaring cannot be overestimated. When ships relied on only the wind for power and speed, there were a huge number of various ropes in use, particularly with regard to the sails and rigging. Seafarers would be judged on their ability to tie knots speedily and correctly. A mounted display of authentic seaman's knots is on a board covered in blue fabric. Various rope grades and fibres were used to work numerous knots and splices. Some of the uses are familiar, such as the toggle, the pineapple knot, and the Turk’s head. A selection of rope grades and fibres were used to work numerous knots and splices. Some of the uses are familiar, such as the toggle, the pineapple knot, and the Turk’s head. The name or purpose of the knot is on the label below it. Labels below each knot give its name or use.flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, knot display, knot making, ropework, marine technology, sailmaker's work, sailor's knots, ship's rigging, seamen's knots, handmade, rope craft, knots, splices

Multiples of these receivers were set on different frequencies and mounted in the racks. Radio units of this type were used in the Aeradio buildingAWA Radio Receiver, Grey colour has four control knobs six toggle switches one ear phone jack and metal tag holder for frequency setting card, Department of Civil Aviation Commonwealth of Australia DCA indent No. Y5/13 Communications Receiver Type R20 Serial numbers 575, 118, 81, 591. Made by AWA Ltd

This photo was part of the Hill family's collection. Notes indicate that it was probably taken by Walter Hill, son of William Valentine Hill of 10 Pembroke Street, Surrey Hills. Walter Ormond Hill was born in 1887. No death record has been located. It is not known where the photo was taken. The donor was the nephew of Walter Hill.A black and white photograph of a man of Chinese appearance with two large containers and a stick connecting the two. The man is dressed in a three piece suit. The jacket appears to have Asian style toggle buttons on it.chinese, drapers, walter hill (mr), walter ormond hill (mr), william dempsey (mr)

Part of the Flight Lieutenant Ian A. 'Joe' Lyons MBE Collection. See Catalogue No. 5374P for his service record.Single metal and enamel cuff link presented as a souvenir of MV Kanimbla. Front face features a lion rampant on a flag. Lettering on a circle of blue enamel. Toggle is connected to the front face with a single link chain.Stamped on the back: 'Angus & Coote'.accessories, mv kanimbla, ian a. 'joe' lyons

Thought to be taken at "Terreglea" in Warrigal Road circa 1900. Maybe related to the Dodgshun family.A black and white photograph of a man standing in bushland. He is wearing a coat that has toggle-like closures down the front (instead of buttons). He is also wearing a cap and has his hands in his pockets.clothing and dress, warrigal road, surrey hills, terreglea, house names