Illustrated book with white binding, Title in black print on front cover and spine. Also on the front cover is a coloured photograph of a grey-haired woman (Norma Tongue) wearing a dark coloured dress and light coloured hat, holding a glass containing liquid in her left hand. On the back cover is another small coloured photograph of a dark-haired woman (Norma Tongue) wearing a blue and white top, a watch and a mug in front of her.An anthology of work by Norma Joan Tongue between1981 and 2002.poetry, norma tomgue

In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Beechwood & Metal, 7/8" to cut 1/4" tongue. Plane subsequently modified to cut tongue.Stamped with owner name ‘G. Greenwood’, with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘30’ added on entering the collection in 2010.woodworking tools, moulding planes, bertie greenwood, carpentry, burwood road — hawthorn (vic.)

In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Beechwood & Metal, 1" for 1/4" Tongue. Stamped ‘Melville’. Later engraved number ‘37’ added on entering the collection in 2010.woodworking tools, moulding planes, bertie greenwood, carpentry, burwood road — hawthorn (vic.)

Colour photograph.Blunt-tongue Greenhood (Pterostylis obtusa) Marlo. 19.5.71." Tube 1. 1/2X f 22 down arrow 14". Shade.blunt-tongue greenhood, pterostylis obtusa, plant id, orchid

Yields information regarding the physical dimension of a switch tongue.SEC drawing number VW4/31, "Provincial Tramways. 100'Rad Switch Tongue". Drawn 25/05/1967. Beige paper copy of original dyeline print.Copy of originalsecv, state electricity commission of victoria, ballarat tramway, ballarat tramway museum, ballarat, electricity supply department, works division

Produced by the SECV to document the Tram rail switch gear.Yields information regarding the Tramway switch tongue.SEC drawing number VW4/16/1B, "Provincial Tramways. Switch Tongue 150' Radius Equilateral". Drawn 28/08/1963. Beige paper copy of original dyeline print. Copy of original.electricity supply department, secv, works division, switch tongue, provincial tramways

Signature Joseph A Scovell was a Beechworth Builder 1907Object removed from Stanley Athenaeum internal front swinging doors when Greg Owen from Period Restorations worked on the Athenaeum building. Weatherboards had been nailed over the window spaces at the top of the doors, this had then been covered with painted masonite board.Wooden weatherboard painted on one side, rough out on the reverseSignature in pencil Joseph A Scovell 1907

Signature Joseph A Scovell was a Beechworth Builder 1907Object removed from Stanley Athenaeum internal front swinging doors when Greg Owen from Period Restorations worked on the Athenaeum building. Weatherboards had been nailed over the window spaces at the top of the doors, this had then been covered with painted masonite board.Wooden weatherboard painted on one side, rough out on the reverseSignature in pencil Joseph A Scovell 1907

"The Hole Index is a series of sixty slashes, gashes, fissures, rips and tears. Images are transferred onto canvas by a process of spray painting through muslin. The index forms a menu of different holes for an imaginary computer programme. Working with the index I enlarged, cropped, coloured and elongated to form individual works of which this is one." - Linda Judge Artist Bio Linda Judge is a graduate of the VCA whose multi -disciplinary practice incorporates sculpture, painting, curating and writing. In 2003 she completed her Masters in Art on personal narratives in contemporary art practice.

This instrument is part of the tonsillectomy set. Mouth gags are used to keep the patient’s mouth open during oral surgery, leaving both hands of the surgeon free to operate. The Boyle Davis mouth gag consists of the Davis gag, a frame that serves to hold the mouth open and the Boyle tongue depressor to hold the tongue down. The tongue depressor comes in several sizes, from pediatric to adult. The instrument is assembled by sliding the tongue blade into the frame. The mouth gag is held in position using the Draffin bipod stand. (Entworld)White metal mouth gag [254.1] and tongue depressor [254.2] set. There are small leather fittings on the ends of each item. The mouth gag is roughly horseshoe shaped and attached to a metal support with a small lever, which also allows the tongue depressor to be attached and withdrawn. The tongue depressor is a straight metal blade which is bent and curved at either end.

Brass half buckle with steel tongue as imported and used in manufacturing equine pieces by Holden and FrostUsed and sold by Holden and Frost Ca1900Brass half buckle , steel tongue imported and sold by Holden and Frostequine agricultural, military, civilianca1900, buckle

Produced by the SECV to document the Switch Tongues.Yields information regarding the dimensions of the Switch Tongues Tramway Permanent Way.SEC drawing number VW4/16, "Switch Tongues Tramway Permanent Way.". Drawn 06/07/1952. Beige paper copy of original dyeline print. Copy of original.electricity supply department, secv, works division, provincial tramways, tramways, switch tongue

Cross country boots are no longer attached to the ski by three holes hooked onto 3 'nails'. Very dark brown solid leather boots with 3 steel loops each side on the lower and 2 steel hooks on the upper section of the opening. The tongue is high and padded. The laces are thick and yellow. The sole is a thick rubber with 3 toe holes (to attach to skis) at the front end.Outer side: embossed 'V'. Inside tongue: 'Vasque / Boots'. Bottom of sole: 'Vibram / 'Made in Italy'cross country boots, skiing boots, falls creek, snow, cross country skiing

This vintage meat press would have been used for pressed tongue in the 1950's. A vintage 1950's three piece Cook-N-Press CastAlloy brand metal rectangular meat press. It has a flat detachable metal plate at the top which when screwed presses the food within. It was used as a tongue press. 'Cook-n-Press A Product of CastAlloy Ltd'kitchen equipment, kitchenware, food press, meat press

Believed to have been acquired from Dr Frank Forster. Eupnine Vernade was a product used in the early 20th century for the treatment of bronchitis, asthma, emphysema and bronchiectasis adjuvant in the treatment of sequaelae of influenza. It contained 10% caffeine iodide, and "exerts an intense action on the respiratory tract, stimulating the bronchial secretion and facilitating expectoration. It regulates and strengthens the heart, contracts the blood vessels of the splanchnic area, but dilates those of the heart and lung. It "also exerts a powerful diuretic action, thus diminishing the strain on the heart." This tongue depressor, therefore, also functions as a form of medical advertising.Metal tongue depressor with rounded ends and a slight convex curve. Inscribed "EUPNINE VERNADE"."EUPNINE VERNADE"examination, advertising

This vintage food press may have been used for pressed tongue and other foods. A small vintage round clip on lidded aluminium food press possibly used for pressed tongue. The clip has the manufacturer's name on it with the Patent No. The clip on the lid has a strong thick steel bar threaded through it which is screwed tight to press the food within. It has a very heavy round concrete weight inside.FOOD PRESS WHITTINGSLOWE Product PAT APPN Number 187.....745kitchen equipment, kitchenware, food press, meat press

A flooring clamp (or cramp) is used for holding tongue and groove floorboards in place whilst laying a new floor. The ratchet handle is used to apply horizontal pressure to hold boards firmly in place until they are secured. “The General and Commercial Directory of the Borough of Birmingham, and six miles round; including Wolverhampton, Bilston, Walsall, West Bromwich” published in 1858 lists William Bissell as an ironmonger in Union Street, Wolverhampton. In the catalogue for the 1862 London Exhibition, three items manufactured by William Bissell were listed, including:- “BISSELL'S PATENT FLOORING CRAMP. The force of this cramp is fully equal to 1 ton. It is adapted to joists from 2 to 4 in. and is the most expeditious and easy in working of any cramp in use.” In the 1864 edition of “Williams's Manufacturers' Directory, for London and Principal Market Towns in England”, page 445, in listings for Wolverhampton, W Bissell is listed as a Patentee of flooring cramps, lifting jacks and proprietor of mortise locks; mortising machines, bench and vertical saw-frames". By 1871 the business was operating as Messrs. J. G. Bissell and Co. and the trademark on this item in our Collection was phased out. This information assists in allocating the provenance of this item to the late 1860s.This item is significant because it is representative of housing construction tools used in the Wodonga District which have evolved into present day tools.A cast iron clamp used to install tongue and groove floorboards. Maker's mark on on side. W. B. BISSELL PATENTEE WOLVERHAMPTONcarpenters' tools, housing construction

General anaesthesia relaxes muscles around the airway which can result in the airway becoming obstructed. Holding the jaw open or keeping the tongue out of the way were crucial. Often, brutal devices were used to open the jaw or pull the tongue forward to clear the airway.Set of four chrome plated metal tongue depressors of different sizes. Each depressor has been engraved with a number (1 - 4). Numbers 2 - 4 also have a metal tube that could be used to administer anaesthesia simultaneously. Numbers 2 - 3 also have cross-hatched grooves in the depressor and all have finger grips engraved into the handles.boyle-davis, airway management

Tongue depressorsequipment, ww1, army

This particular type of tongue blade comes in sizes 2,4,6, and 8 and can be easily fitted to the Boyle Davis mouth gag.Metal tongue depressor, metal with a metal tube and nozzle attachment. Consists of a shaft and two metal sections at right angles to the shaft. Distal section is turned inwards to act as a lever. Proximal section is shaped as a flange with multiple serrations on the underside. There is a small metal tube attached along the entire length of the flange. The tube is turned downwards at the junction of the flange and the shaft, with a small bulb at the end. A small piece of tubing can be attached to this bulb.

The Cat NRS 11157, 11155.2, 11151.3, 11158 were all probably owned by a Lieutenant C.H. Simpson, a CMF Officer with the 49th (City of Prahran) Regiment. 1912-13 "E"- Coy. 1913-15 Bn HQ Staff 1915-16 Postings unknown.Sam Browne belt assembly in brown leather. It has the waist belt, shoulder strap and sword holder. The belt has a 2 pin brass buckle. Other various buckles are also made of brass.Stamped in gold, on a tongue of the belt are markings from Manufacturer.uniform, sam browne belt, army