Vice President medallion belonging to Saul Spielmann donated to the Society by his wife Shirley. The Kew Heights Bowling Club was an amalgamation in 1998 of the Kew and Auburn Heights Bowling Clubs.Pendant medallion hanging from a blue enamel bar with the title 'Vice President'. The green red and gold medallion of the Kew Heights Bowling Club includes a centrally positioned representation of an eagle holding a bowling ball.VICE PRESIDENT / KEW HEIGHTS BOWLING CLUBsaul spielmann, kew heights bowling club

This medical / hospital instrument was used in the Tawonga District General Hospital which was built in the 1950's specifically for the increase in population due to the Kiewa Hydro Scheme.Historical: Shows the development of scientific hospital equipment. Provenance: Used in the Tawonga District General Hospital which was remote and therefore required good equipment. Good condition and good interpretation capacity.Steel vice with 5 rods at right angles to the bottom plates and a handle on the opposite side attached to the square shaped rod. The handle is covered with a wooden hand piece enabling this square shaped rod to be rotated for winding bandages. The other 4 rods are cylindrical. The handle of the vice can be screwed down to fit onto a table or bench.Handle of the vice: '2697'bandage winder, medical, hospital, tawonga district hospital

The Blacksmith could take this portable 'leg vice' and make repairs away from his forge.He could mend wheel bands, tools, farm equipment and also fine tune generic sized horseshoes on site. He would build a fire and secure his leg vice to a stable point thus allowing him to work on any heated metal as required. A Blacksmith was an essential person for the maintenance and making of farm and household equipment, and shoeing horses, in the pioneer settlements of Brighton, Moorabbin, Cheltenham c1900Blacksmith's 'leg' vice. Sturdy blacksmith leg, post (vice). 15cm jawsblacksmith, vise, moorabbin, bentleigh, brighton, market gardeners, forges, tools, early settlers, pioneers, ploughs, carts horse-drawn, anvils

A leg vice is a mechanical apparatus used to secure an object to allow work to be performed on it by a carpenter or cooper such a planning wood. Vices generally have two parallel jaws, one fixed and the other movable, threaded in and out by a screw and lever. A leg vice gives greater holding power or force to a piece of material while a carpenter works on the timber.The subject item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Leg Vice metal attached to cooper's bench Noneflagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, vice, leg vice, coopers tools, workbench vice, carpenters tools, woodworking tools

Perak or State of Perak one of the 13 states of Malaysia, is the second largest state in Peninsular Malaysia. It borders Kedah and the Thai Yala Province to the north; Penang to the northwest; Kelantan and Pahang to the east; Selangor to the south, and the Straits of Malacca to the west. The state's administrative capital of Ipoh was known historically for tin-mining activities until the price of the metal dropped, severely affecting the state's economy. A vice is a tool with 2 jaws between which an object is gripped, usually by tightening a screw, so as to leave the hands free for working upon it. The vice is usually firmly attached to a bench . A steel vice THE PERAK TIN MINING COMPANYtools, vice, steel , clamps, metalwork, woodwork, carpentry, early settlers, pioneers, market gardeners, moorabbin, bentleigh, cheltenham, blacksmiths, perak tin mining co.

Sports Clubs in Kew in the final decades of the 19th century and in the early 20th century were often umbrella organisations with facilities for a number of sports. Typically in Kew, this included teams in lawn bowls, tennis and croquet. The Kew Bowling Club was formed in 1880 while the privately owned Auburn Heights Recreation Club was opened in 1904. By 1998, the two Clubs decided to amalgamate at the Auburn Heights site in Barkers Road, forming the Kew Heights Sports Club. The combined club was itself taken over by the Melbourne Cricket Club in 2012 becoming MCC Kew Sports Club. In 2017 MCC Kew closed and its landholding was subsequently sold to Carey Baptist Grammar School. Both the Kew and Auburn Heights Clubs assembled important collections. These historically significant and large collections were donated to the Society in 2020. The collections include manuscripts, pictures, trophies, plans, honour boards etc. The combined collections of the four sporting clubs making up the collection number hundreds of items that are historically significant locally. They are also significant to the sporting history of the greater Melbourne area and to the sports of lawn bowls and tennis in Australia in the 19th and 20th centuries. The collection illuminates two of the Victorian historic themes - 'Building community life' through forming community organisations and 'Shaping cultural and creative life' by participating in sport and recreation.Silver plated ewer, commemorating the win in 1901-02 of the Vice Presidents Prize of the Kew Bowling Club by M Collins.KEW BOWLING CLUB / SEASON 1901-2 / VICE-PRESIDENTS PRIZE / WON BY M COLLINSkew bowling club - wellington street - kew (vic), clubs - lawn bowls - kew (vic), trophies - lawn bowls

Professor David James was the inaugural Vice-Chancellor of the University of Ballarat, a predecessor institution of Federation Uinversity Australia.Photographic portrait of University of Ballarat Vice Chancellor David James

Two University of Ballarat self inking date stamps, likely to be used by Vice Chancellor's administration staff to stamp the date on documents. Two Colop R50 Printer Round Self Inking Rubber Stamp self Inking Stamp - Ink cartridge is already integrated into the stamp. It dispenses ink to the stamp plate during each stamping procedure. Can provide up to 10,000 impressions with out refillling ink.Not suitable for use on glossy and wax paper, and has non toxic ink. University of Ballarat Vice Chancellors Officestamp, university of ballarat, stationery, office supplies, self inking stamp, administration

A wheelwright’s spoke vice was used to hold the wheel hub firmly while the spokes were hammered into the wheel hub, then the spokes would be joined to the wooden wheel felloe before finally the metal flat tyre, or later the rubber tyre, would be attached to the felloe. A wheelwright’s spoke vice would have been very necessary for blacksmiths circa 1800s-1920s as it would have been used in the manufacture and repair of carts, wagons, coaches and other horse-drawn vehicles. This wheelwright’s spoke vice was once used by Harry Goodall of H. Goodall & Sons Pty. Ltd. corner of McKinnon and High Streets, Terang. Victoria. Henry Goodall & Sons Henry Goodall (1870-1936) was proprietor of garages as H. Goodall & Sons Pty. Ltd., at both Terang (McKinnon and High Streets) and Mortlake (Dunlop Street). His business was in operation in at least in 1916 and perhaps well before, considering the date of the tyre bender and its use for wagons with wooden wheels. It was still in operation in 1953, chasing up debtors in Mount Gambier Court. Amongst the employees of H. Goodall & Sons Pty. Ltd. was Ernie Entwistle, a blacksmith (a soldier who died in 1916) and Alfred Hodgetts, radio expert (killed in a fatal accident in 1943, when he was in his early 30s). Henry Goodall was involved in the community as a Justice of Peace, a deputy coroner, President of the Mortlake Hospital, trustee of the Soldiers’ Memorial Hall, and as a prominent Freemason. He and his wife had two sons (Charles and John) and one daughter (Mrs. Chas. Newton, of Skipton). The wheelwright’s spoke vice is significant as it demonstrates how blacksmiths or wheelwrights could make new metal rims for wagon wheels for carts, wagons, stage coaches and carriages over a 135 years ago. The machine is a part of our social history as it demonstrates part of the process of making wagon wheels, which played an important part in aiding the continuation of daily transport needs that people had at the time, such as farming, personal transport and commercial activities. The tool is locally significant as it was used by a local company in Terang and Mortlake in their blacksmith, wheelwright and garage business. Vice; wheelwright’s wheel spoke vice. Manufactured in 1800s. This was once belonged to Harry Goodall & Sons, blacksmith's of Terang. Victoria.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, machinery, wagon wheel, steel rim wheels, henry goodall (1870-1936), terang, wheelwright tool, blacksmith trade, blacksmithing equipment and supplies, h. goodall & sons of terang, terang blacksmith, h. goodall & sons pty ltd, mortlake, ernie entwistle blacksmith, alfred hodgetts radio expert, charles goodall, john goodall, wheel hub, wheel spoke, wheel felloe, wheel tyre, wheel tire

This leg (post) vice once belonged to Goodall and Sons, who were blacksmiths in Terang. The leg vice is a common tool of the ‘smithies’ (blacksmiths). It is also an engineer's tool but in the early 1900s the smith was often the nearest approach to an engineer’s services for many miles around. The smith was called upon to do a variety of work. The leg vice is used to hold hot iron while the metal is pounded, heated and beaten again and again until it is the required shape. Henry Goodall (1870-1936) Henry Goodall was the proprietor of garages as H. Goodall & Sons Pty. Ltd., at both Terang (McKinnon and High Streets) and Mortlake (Dunlop Street). His business was in operation in at least in 1916 and perhaps well before, considering the date of the tyre bender and its use for wagons with wooden wheels. It was still in operation in 1953, chasing up debtors in Mount Gambier Court. Amongst the employees of H. Goodall & Sons Pty. Ltd. was Ernie Entwistle, a blacksmith (a soldier who died in 1916 ) and Alfred Hodgetts, radio expert (killed in a fatal accident in 1943, when he was in his early 30s ). Henry Goodall was involved in the community as a Justice of Peace, a deputy coroner, President of the Mortlake Hospital, trustee of the Soldiers’ Memorial Hall, and as a prominent Freemason. He and his wife had two sons (Charles and John) and one daughter (Mrs. Chas. Newton, of Skipton). The leg vice is locally significant as it was used by a local company in Terang and Mortlake in their blacksmith, wheelwright and garage business. It is an example of the tools of the blacksmiths’ trade in Victoria in the early to mid-1900s.Leg vice, also called a post vice. The large iron vice stands on a post on the floor and post brackets attach it firmly to a solid object such as a workbench. The sliding metal handle winds the screw spindle in and out to change the grip of the jaws that hold the workpiece. This leg vice once belonged to Harry Goodall & Sons, blacksmiths of Terang.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, h. goodall & sons of terang, terang blacksmith, h. goodall & sons pty ltd, mortlake, ernie entwistle blacksmith, alfred hodgetts radio expert, charles goodall, john goodall, mrs. chas. newton nee goodall, trade tools, blacksmith tools, leg vice, leg vise, pose vice, post vise, terang 1900s, warrnambool district 1900s

Michael Adermann was the University of Ballarat Deputy Vice-Chancellor (development)/Director of TAFE from c1997-27 January 2001. He was appointed Deputy Director at the Hunter Institute of Technology in Newcastle.Colour photograph of University of Ballarat Deputy Vice-Chancellor Michael Adermann.michael adermann, tafe, university of ballarat, university of ballarat, deputy vice-chancellor

This vice is used to secure an object to allow work to be performed on it. It would have been attached to a workbench.A large metal bench vice. It has two parallel jaws, one fixed and the other movable, threaded in and out by a screw and lever.Dawn 3 1/2bench-vice

One of a collection of over 400 photographs in an album commenced in 1960 and presented to the Phillip Island & Westernport Historical Society by the Shire of Phillip IslandPhotograph of a painting by F Wheatley National Portrait Gallery, of Vice Admiral Arthur Phillip standing on beach between water and rocks. Small boat with sailor nearby and ship under sail in background.Vice Admiral Arthur Phillip - first Governor of New South Wales. The man after whom Phillip Island was named.local history, photography, photographs, exploration, maritime, governor arthur phillip, arthur phillip, john jenner, bryant west

Rev. Djiniyini Gondarra 1986. Moderator Northern Synod and Vice President of Uniting Aboriginal and Islander Christian Conference.Head and shoulders portrait."Rev. Djiniyini Gondara, Vice President of Uniting Aboriginal and Islander Christian Congress"gondarra, djiniyini, uniting aboriginal & islander christian congress

Rev. Djiniyini Gondarra 1986. Moderator Northern Synod and Vice President of Uniting Aboriginal and Islander Christian Conference.Head and shoulders portrait."Rev. Djiniyini Gondara, Vice President of Uniting Aboriginal and Islander Christian Congress"gondarra, djiniyini, uniting aboriginal & islander christian congress

Rev. Djiniyini Gondarra 1986. Moderator Northern Synod and Vice President of Uniting Aboriginal and Islander Christian Conference.Head and shoulders portrait."Rev. Djiniyini Gondara, Vice President of Uniting Aboriginal and Islander Christian Congress"gondarra, djiniyini, uniting aboriginal & islander christian congress

Black and white photograph. 3 students standing and seated in the Ornamental Garden, with B. Dimelow, Vice-Principal. Probably the House Captains.On reverse, "1968 L-R Rear R.W. Boyle, G. Toyne, Front B. Dimelow (Vice-Principal), Kris Clough," and, "Photograph by Information Branch Victorian Department Of Agriculture Ref. No. D.1341." students, r.w. boyle, g. toyne, vice-principal, kris clough, house captains, publicity

Formerly KV113. The blacksmith's vice firmly holds hot iron while it is hammered, chiseled or twisted. It is the only vice that is designed to take this kind of use day in and day out.Used by blacksmiths in the Kiewa Valley.Formerly KV 113. Large 4 inch and heavy steel blacksmith's vice missing the handle bit that turns around making the jaws go in and out. Ref. Page 74 Tools for all Trades Catalogue.blacksmith's tool, vice, blacksmith's vice

Peter CHURCHER (28 February 1964- ) Born Brisbane, Australia 2006 moved to Barcelona, Spain After studying Music at Trinity College, London Peter Churcher completed a Bachelor of Fine Arts (Painting) at Victoria College (know Deakin University) in 1991. He is now considered one of Australia's leading figurative painters. Peter Churcher's work was represented in the prestigious Archibald Prize on nine occasions. In 2002 Peter Churcher was commissioned as an Australian War Artist documenting the Royal Australian Navy and the Royal Australian Air Force enduring the Australian involvement in the coalition war against terrorism. His works are held in many Australian collections. Professor Kerry O. Cox was Vice Chancellor at the University of Ballarat from 2001 - 2005. This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007. Framed academic portrait of Vice Chancellor Professor Kerry Cox art, artwork, portrait, academic portrait, peter churcher, kerry cox, vice chancellor, academic regalia

Cyril Henry Woodford Kett FBOA FSMC (1890-1971) was one of the five people who signed the Memorandum and Articles of Association of the Australian College of Optometry in 1939. He was a councillor of the College from 1940 to 1970 and First Vice President 1944 to 1947. He was made an honorary life member of the College in 1954. He donated numerous items of historical interest to the College that provided the foundation of the Museum which now bears his name. It was painted by another optometrist, John Nathan.This painting is significant to the College as it is one of only ten portraits in oils of individuals who have been leaders in the development of the College.This framed oil painting shows Mr Cyril Henry Woodford Kett FBOA FSMC (1890-1971),Councillor and Vice President of the Australian College of Optometry, an important figure in Optometry in Victoria. It was painted in 1980 by another optometrist, John Nathan,and is signed by the artist at lower right corner: 'John Nathan'.Signed by artist at lower right corner: 'John Nathan'. Plaque on frame reads:'Cyril H W Kett FBOA(Hons) FSMC FVOA c1890-1970/ Councillor of the College 1940-1970/ Vice President 1940-42, 1944-47, 1948-50, 1954-70/ Chairman of Council 1944-1947/ One of the five signatories to the original Memorandum of Association of the Victorian College of Optometry'.optometry, painting, oil painting, portrait, cyril h w kett

The blacksmith leg vise is also called the "solid box vise" and is one of the most important tools in the blacksmith's shop. It firmly holds hot iron while it is hammered, chiseled, or twisted. These are the only vises that are designed to take this kind of use day in and day out. A small 30-pound blacksmith's vise can survive pounding that would wreck a much heavier cast iron bench model. Three things make a blacksmith's vice special. One is that they are forgings, not cast iron or ductile iron. The second is the leg that provides support to the floor or from a sunken post. The last is the hinge, while not a perfect way to construct a vice the pin joint is durable and can take a considerable beating. If sheared it is easy to replace. These things all combine into a tool that can take decades of heavy use and abuse. Most in use is one to two hundred years old.Some of these vises were made by specialists such as Atwood of Stourbridge England, Steel City and Columbian in the U.S. and others were made in anvil manufacturing plants such as "Mousehole Forge" and "Peter Wright" in England and "Fisher-Norris" and others in North America. The design of these vises right down to the last chamfer seems to have been perfected in the 1600s and remained more or less the same until the 20th century. The bodies are forged wrought iron or mild steel and they have hard steel surfaces welded into the jaws. The jaws have little or very shallow serrations which are generally worn off.Around the turn of the 20th Century during the hey-day of the blacksmith shop in North America, these tools were considered so standard a commodity that they were sold without reference to the manufacturer. Very few were even marked with the maker's name. Size is best defined by weight as there is some variation in jaw size from manufacturer to manufacturer. They were sold by the pound and are still best judged by the pound.A vintage tool used in a Blacksmiths shop during the early 19th century to the beginning of the 20th century. Regarded as a significant into social history of the time.Leg Vice attached with screws to bench via a block of wood. Has large metal pole which practically reaches the floor. Also has a metal device to either tighten or slacken vice.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Vice Chancellor was influential in promoting University of Ballarat in becoming a central player in the Ballarat and Western Victoria region. In 1998 he oversaw the amalgamation of the University with two Tafe institutions, which created the only multi-sectorial regional university in Australia. Professor James was a formal Ballarat City Councillor, the Chairman of the Ballarat Foundation from 2001 to 2008. He was also the recipient of the Centenary Medal in 2003 – an award created by the Centenary of Federation, which recognises the achievements of a cross-section of the Australian community, by honouring people who have contributed to society of government in Australia. This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007. Framed academic portrait of inaugural Univesity of Ballarat Vice-Chancellor David James.Lower RHS M. Henwood 01art, artwork, michael henwood, henwood, david james, vice chancellor, academic portrait, portrait, academic regalia

Academic gowns distinguish between the University's senior office holders and our graduates. Federation University's Chancellor wears a blue robe that is trimmed with gold and features a gold embroidered frog at the shoulder and gold oak-leaf braid below the arm hole. The Deputy Chancellor and the Vice-Chancellor also wear blue robes, with gold trims and different designs inclorporating the gold oak-leaf braid, ord or tassels. The members of the university Council wear black robes with a sole of gold. Our graduates wear black robes, with either a black trancher cap or bonnet (for professional octorate) with stoles, linings or trims in the colour of their discipline. University of Ballarat Vice Chancellor, Professor David Battersby, at the ecturn during a graduation ceremony. david battersby, graduations, academic regalia, vice chancellor

Very old vice. The clamp is 50 to 60 years old when they were made by Technical School students in metal work class.Used by carpenters, woodworkers, furniture makers, welders, construction and metal workers in the Kiewa ValleyMathieson's Hand Vice, the smallest at 3 inches. Ref. Page 74 Tools for all Trades Catalogue. Small steel vice consisting of two parallel jaws for holding a workpiece. One jaw is fixed and the other movable by a screw. The clamp is used for holding a workpiece during hand operations eg. filing, hammering or sawing. Small steel clamp is a versatile tool that serves to temporarily hold work securely in place by screwing each jaw together.vice/vise tool, clamp tool, hand tools

Blacksmith's vice called a leg vice. It rests on a solid block on the floor and secured on the bench with bolts. The vice was made of wrought iron with hardened steel jaws.rural industry, farm machinery, trades, blacksmithing