Showing 3959 items
matching domestic-and-leisure
Accessory (1613)
Clothing (3048)
Costume (165)
Craft (187)
Domestic object (2542)
Footwear (174)
Furniture (390)
Headwear (501)
Leisure object (686)
-
Kew Historical Society Inc
Footwear - Pair of Black Rubber Overshoes
The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. These shoes were owned, worn and donated to the collection by Dione McIntyre.The McIntyre Collection of clothing and clothing accessories forms one of the largest single donations to our Fashion & Design collection. It includes clothing and clothing accessories worn by four women in the Cohen and McIntyre families across three generations. The items worn by Melbourne architect, and Kew resident, Dione McIntyre date from the 1960s and 1970s, and include evening wear, day wear, hats and shoes. As Dione McIntyre often accompanied her husband, fellow architect Peter McIntyre, to formal events, there are a number of pieces of evening wear among the items. The McIntyre Collection also includes items worn by women of an earlier generation: by Lilian Cohen, Dione McIntyre's mother, and by her mother-in-law, the wife of the architect Robert McIntyre. At the other end of the chronological spectrum are a number of outfits belonging to, worn and donated by Annie McIntyre. These include outfits created by notable late 20th century Australian and/or international fashion designers. The McIntyre Collection is significant historically and artistically as it includes examples of design that demonstrate changing tastes in fashion over an 80-year period. The collection is also significant in that it includes the work of a large number of Melbourne designers from the 1960s to the 1990s. Pair of black rubber overshoes, owned and worn by Dione McIntyre. The Flarta shoes protected vulnerable shoes from mud or rain. footwear, shoes, overshoes, flarta shoes, mcintyre collection -
Clunes Museum
Domestic object - IRON
SHELLITE IRON - WOODEN HANDLE - BLUE FUEL CONTAINER - BLUE - MINUS SCREW ON TOP IRON BASE - BLUE AND SILVERKNOB AT BASE OF FUEL TANK MARKED - CLOSElocal history, domestic item, irons, domestic items -
Bendigo Historical Society Inc.
Domestic Object - BROWN TEAPOT
Brown earthenware teapot with lid, lighter streaking in glaze.ALB Patented England Made in Englanddomestic equipment, food preparation, kitchen -
Tatura Irrigation & Wartime Camps Museum
Domestic object - Iron
Item used at Tatura Camp 3 for ironing garmentsSilver colour metal, black wooden handle, rather ornate. Head and shoulders figure of man in a top hat opens hinged lid on iron. Slits for ventilation around the base.iron, camp 3, tatura, laundry, domestic, kurt beilharz -
Southern Sherbrooke Historical Society Inc.
Headwear - Woman's feather hat
Black feather hat (almost pill box shaped), some feathers disintegrating, no label. -
Flagstaff Hill Maritime Museum and Village
Domestic object - Plate, Alfred Meakin
The Process of Making Pottery Decorating, Firing, Glazing, Making, Technical There is a rhythm and flow to clay. It can’t be done all at once! Even the making process! It can take weeks to get everything done, especially if you can only work on your pottery once a week! Even though we have three hour classes, it’s often just not enough time! Here is an overview of some of the processes so you have a bit more grasp on some of the technical stuff! Step One – Design There are SO many ideas out there for making stuff in clay! From delicate porcelain jewellery, through to heavy sculptural work and everything in between. Deciding your direction is sometimes not that easy – when you first start, try everything, you will naturally gravitate to the style that you enjoy! The options and variations are endless and can get a wee bit overwhelming too! Check in with me before you start to ensure your ideas will work, what order you might do things, how you could achieve the look you are seeking and any other technical data required! Step Two – Making Clay is thixotropic. This means that as you work with it, the clay first gets sloppier and wetter, before is begins to dry in the atmosphere. For most things, you simply can’t do all parts of the project at once. An example of work order might look like: Get last weeks work out from the shelves Prepare clay for today’s work – roll your clay, prepare balls for throwing, make the first stage of a pinch pot) Clean up last week’s work and put it on the shelf for bisque firing Check that you have any glazing to do – and do enough of it that you will have time to finish your main project Do the next step of your next project – there might be a further step that can’t be complete immediately, in that case, wrap your work well and put onto the shelves. Letting your work rest for a while can really help keep your work clean and professional looking. Many things require bagging under plastic to keep it ready for work the next week – put your name on the outside of the bag so you can find your work easily. We have stickers and markers. Consider how you want to decorate your work – coloured slip can be applied at a fairly wet stage (remembering that it will make your work even wetter!). Trying to apply slip to dry clay won’t work! If you want to do sgraffito – you will need to keep the work leather hard (a state of dryness where you can still work the clay with a little effort and a little water and care). Step Three – Drying Most of the time your work can go into the rack uncovered to let it dry out for the following week. If you want to continue forming or shaping you will need to double bag your work – put your work on a suitable sized bat and put the bat in a bag so the base of the bag is under the bat, then put another bag over the top of the work and tuck the top of the bag under the bat. If you want to trim (or turn) your thrown work the following week, it should also be double bagged. If your work is large, delicate, or of uneven thicknesses, you should lightly cover your work for drying. When considering the drying process, bare in mind the weather, humidity and wind! The hotter and dryer, the faster things dry and work can dry unevenly in the shelves – this can lead to cracking – another time to lightly cover your work for drying. Step Four – Trimming and Cleaning Up Your work is dry! It is called greenware now and it is at it’s most fragile! Handle everything with two hands. I often refer to soft hands – keep everything gentle and with your fingers spread as much as possible. Try to not pick up things like plates too much, and always with both hands! Before your work can be bisque fired it should be “cleaned up”. You work won’t go into the kiln if it has sharp edges – when glazed, sharp edges turn into razor blades! Use a piece of fly wire to rub the work all over – this will scratch a little so be light handed. Use a knife or metal kidney to scrape any areas that require a bit more dynamic treatment than the fly wire offers! Finally, a very light wipe over with a slightly damp sponge can help soften and soothe all of your edges and dags! Trimming thrown work: If you are planning to trim (or turn) your thrown work (and you should be), make sure you bag it well – your work should be leather hard to almost dry for easiest trimming. Use this step to finish the work completely – use a metal kidney to polish the surface, or a slightly damp sponge to give a freshly thrown look. Wipe the sponge around the rim after trimming, and check the inside of the pot for dags! Trimming slip cast work: Usually I will trim the rims of your work on the wheel the following day to make that stage easier, however you will still need to check your work for lumps and bumps. Last but not least – check that your name is still clearly on the bottom of your work. Step Five – Bisque Firing When the work is completely dry it can go into the bisque kiln. The bisque kiln is fired to 1000°C. This process burns off the water in the clay as well as some of the chemically bound water. The structure of the clay is not altered that much at this temperature. Inside the bisque kiln, the work is stacked a little, small bowl inside a larger bowl and onto a heavy plate. Smaller items like decorations or drink coasters might get stacked several high. Consideration is paid to the weight of the stack and shape of the work. A bisque kiln can fire about one and a half times the amount of work that the glaze kiln can fire. The firing takes about 10 hours to complete the cycle and about two days to cool down. Once it has been emptied the work is placed in the glaze room ready for you to decorate! Step Six – Glazing Decorating your work with colour can be a lot of fun – and time consuming! There are three main options for surface treatment at this stage: Oxide Washes Underglazes Glazes Washes and underglazes do not “glaze” the work – It will still need a layer of glaze to fully seal the clay (washes don’t need glaze on surfaces not designed for food or liquid as they can gloss up a little on their own). Underglazes are stable colourants that turn out pretty much how they look in the jar. They can be mixed with each other to form other colours and can be used like water colours to paint onto your work. Mostly they should have a clear glaze on top to seal them. Oxides are a different species – the pink oxide (cobalt) wash turns out bright blue for instance. They don’t always need a glaze on top, and some glazes can change the colour of the wash! The glazes need no other “glaze” on top! Be careful of unknown glaze interactions – you can put any combination of glaze in a bowl or on a plate, but only a single glaze on the outside of any vertical surface! Glazes are a chemical reaction under heat. We don’t know the exact chemicals in the Mayco glazes we use. I can guess by the way they interact with each other, however, on the whole, you need to test every idea you have, and not run the test on a vertical surface! Simply put, glaze is a layer of glass like substance that bonds with the clay underneath. Clay is made of silica, alumina and water. Glaze is made of mostly silica. Silica has a melting point of 1700°C and we fire to 1240°C. The silica requires a “flux” to help it melt at the lower temperature. Fluxes can be all sorts of chemicals – a common one is calcium – calcium has a melting point of 2500°C, however, together they both melt at a much lower temperature! Colourants are metal oxides like cobalt (blue), chrome (green through black), copper (green, blue, even red!), manganese (black, purple and pink) iron (red brown), etc. Different chemicals in the glaze can have dramatic effects. for example, barium carbonate (which we don’t use) turns manganese bright pink! Other elements can turn manganese dioxide brown, blue, purple and reddish brown. Manganese dioxide is a flux in and of itself as well. So, glazes that get their black and purple colours, often interact with other glazes and RUN! Our mirror black is a good example – it mixes really well with many glazes because it fluxes them – causes them to melt faster. It will also bring out many beautiful colours in the glazes because it’s black colouring most definitely comes from manganese dioxide! Glaze chemistry is a whole subject on it’s own! We use commercial Mayco glazes on purpose – for their huge range of colour possibilities, stability, cool interactions, artistic freedom with the ability to easily brush the glazes on and ease of use. We currently have almost 50 glazes on hand! A major project is to test the interactions of all glazes with each other. That is 2,500 test tiles!!!! I’m going to make the wall behind the wheels the feature wall of pretty colours! Step Seven – Glaze (Gloss or sometimes called “Glost”) Firing Most of the time this is the final stage of making your creation (but not always!) The glaze kiln goes to 1240°C. This is called cone 6, or midrange. It is the low end of stoneware temperatures. Stoneware clays and glazes are typically fired at cone 8 – 10, that is 1260 – 1290°C. The energy requirement to go from 1240°C to 1280°C is almost a 30% more! Our clay is formulated to vitrify (mature, turn “glass-like”) at 1240°, as are our glazes. A glaze kiln take around 12 hours to reach temperature and two to three days to cool down. Sometimes a third firing process is required – this is for decoration that is added to work after the glaze firing. For example – adding precious metals and lustres. this firing temperature is usually around 600 – 800°C depending upon the techniques being used. There are many students interested in gold and silver trims – we will be doing this third type of firing soon! After firing your work will be in the student finished work shelves. Remember to pay for it before you head out the door! There is a small extra charge for using porcelain clay (it’s more than twice the price of regular clay), and for any third firing process! Once your work has been fired it can not turn back into clay for millennia – so don’t fire it if you don’t like it! Put it in the bucket for recycling. https://firebirdstudios.com.au/the-process-of-making-pottery/Ceramics have evolved over thousands of years.Earthenware dessert plate, cream colour. Made by Alfred Meakin, England. Backstamped ‘Alfred Meakin England’. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, alfred meakin, ceramics, earthenware, kitchenware -
Flagstaff Hill Maritime Museum and Village
Domestic object - Spoon, circa 1878
This table spoon is from the wreck of the LOCH ARD, a Loch Line ship of 1,693 tons which sailed from Gravesend, London, on 2 March 1878 with 17 passengers and a crew of 36 under Captain George Gibbs. “The intention was to discharge cargo in Melbourne, before returning to London via the Horn with wool and wheat”. Instead, on 1 June 1878, after 90 days at sea, she struck the sandstone cliffs of Mutton Bird Island on the south west coast of Victoria, and sank with the loss of 52 lives and all her cargo. The manifest of the LOCH ARD listed an array of manufactured goods and bulk metals being exported to the Colony of Victoria, with a declared value of £53,700. (202 bills of lading show an actual invoice value of £68, 456, with insurance underwriting to £30,000 of all cargo). Included in the manifest is the item of “Tin hardware & cutlery £7,530”. This table spoon is one of 482 similar items of electro-plated cutlery from the LOCH ARD site, comprising spoons and forks of various sizes but all sharing the same general shape or design and metallic composition. 49 of these pieces display a legible makers’ mark — the initials “W” and “P” placed within a raised diamond outline, which is in turn contained within a sunken crown shape — identifying the manufacturer as William Page & Co of Birmingham. An electroplater’s makers’ marks, unlike sterling silver hallmarks, are not consistent identifiers of quality or date and place of manufacture. A similar line of five impressions was usually made to impress the consumer with an implication of industry standards, but what each one actually signified was not regulated and so they varied according to the whim of the individual foundry. In this case, the maker’s marks are often obscured by sedimentary accretion or removed by corrosion after a century of submersion in the ocean. However sufficient detail has survived to indicate that these samples of electro-plated cutlery probably originated from the same consignment in the LOCH ARD’s cargo. The generally common range of marks are drawn from 255 tea spoons, 125 dessert spoons, and 99 table forks. These marks are clearly visible in 66 instances, while the same sequence of general outlines, or depression shapes, is discernible in another 166 examples. Suggested trade names for William Page & Co’s particular blend of brass plating are ‘roman silver’ or ‘silverite’. This copper alloy polishes to a lustrous gold when new, discolouring to a murky grey with greenish hue when neglected. HISTORY OF THE LOCH ARD The LOCH ARD belonged to the famous Loch Line which sailed many ships from England to Australia. Built in Glasgow by Barclay, Curdle and Co. in 1873, the LOCH ARD was a three-masted square rigged iron sailing ship. The ship measured 262ft 7" (79.87m) in length, 38ft (11.58m) in width, 23ft (7m) in depth and had a gross tonnage of 1693 tons. The LOCH ARD's main mast measured a massive 150ft (45.7m) in height. LOCH ARD made three trips to Australia and one trip to Calcutta before its final voyage. LOCH ARD left England on March 2, 1878, under the command of Captain Gibbs, a newly married, 29 year old. She was bound for Melbourne with a crew of 37, plus 17 passengers and a load of cargo. The general cargo reflected the affluence of Melbourne at the time. On board were straw hats, umbrella, perfumes, clay pipes, pianos, clocks, confectionary, linen and candles, as well as a heavier load of railway irons, cement, lead and copper. There were items included that intended for display in the Melbourne International Exhibition in 1880. The voyage to Port Phillip was long but uneventful. At 3am on June 1, 1878, Captain Gibbs was expecting to see land and the passengers were becoming excited as they prepared to view their new homeland in the early morning. But LOCH ARD was running into a fog which greatly reduced visibility. Captain Gibbs was becoming anxious as there was no sign of land or the Cape Otway lighthouse. At 4am the fog lifted. A man aloft announced that he could see breakers. The sheer cliffs of Victoria's west coast came into view, and Captain Gibbs realised that the ship was much closer to them than expected. He ordered as much sail to be set as time would permit and then attempted to steer the vessel out to sea. On coming head on into the wind, the ship lost momentum, the sails fell limp and LOCH ARD's bow swung back. Gibbs then ordered the anchors to be released in an attempt to hold its position. The anchors sank some 50 fathoms - but did not hold. By this time LOCH ARD was among the breakers and the tall cliffs of Mutton Bird Island rose behind the ship. Just half a mile from the coast, the ship's bow was suddenly pulled around by the anchor. The captain tried to tack out to sea, but the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. Waves broke over the ship and the top deck was loosened from the hull. The masts and rigging came crashing down knocking passengers and crew overboard. When a lifeboat was finally launched, it crashed into the side of LOCH ARD and capsized. Tom Pearce, who had launched the boat, managed to cling to its overturned hull and shelter beneath it. He drifted out to sea and then on the flood tide came into what is now known as LOCH ARD Gorge. He swam to shore, bruised and dazed, and found a cave in which to shelter. Some of the crew stayed below deck to shelter from the falling rigging but drowned when the ship slipped off the reef into deeper water. Eva Carmichael had raced onto deck to find out what was happening only to be confronted by towering cliffs looming above the stricken ship. In all the chaos, Captain Gibbs grabbed Eva and said, "If you are saved Eva, let my dear wife know that I died like a sailor". That was the last Eva Carmichael saw of the captain. She was swept off the ship by a huge wave. Eva saw Tom Pearce on a small rocky beach and yelled to attract his attention. He dived in and swam to the exhausted woman and dragged her to shore. He took her to the cave and broke open case of brandy which had washed up on the beach. He opened a bottle to revive the unconscious woman. A few hours later Tom scaled a cliff in search of help. He followed hoof prints and came by chance upon two men from nearby Glenample Station three and a half miles away. In a state of exhaustion, he told the men of the tragedy. Tom returned to the gorge while the two men rode back to the station to get help. By the time they reached LOCH ARD Gorge, it was cold and dark. The two shipwreck survivors were taken to Glenample Station to recover. Eva stayed at the station for six weeks before returning to Ireland, this time by steamship. In Melbourne, Tom Pearce received a hero's welcome. He was presented with the first gold medal of the Royal Humane Society of Victoria and a £1000 cheque from the Victorian Government. Concerts were performed to honour the young man's bravery and to raise money for those who lost family in the LOCH ARD disaster. Of the 54 crew members and passengers on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael, who lost all of her family in the tragedy. Ten days after the LOCH ARD tragedy, salvage rights to the wreck were sold at auction for £2,120. Cargo valued at £3,000 was salvaged and placed on the beach, but most washed back into the sea when another storm developed. The wreck of LOCH ARD still lies at the base of Mutton Bird Island. Much of the cargo has now been salvaged and some was washed up into what is now known as LOCH ARD Gorge. Cargo and artefacts have also been illegally salvaged over many years before protective legislation was introduced. One of the most unlikely pieces of cargo to have survived the shipwreck was a Minton porcelain peacock - one of only seven in the world. The peacock was destined for the Melbourne International Exhibition in 1880. It had been well packed, which gave it adequate protection during the violent storm. Today, the Minton peacock can be seen at the Flagstaff Hill Maritime Museum in Warrnambool. From Australia's most dramatic shipwreck it has now become Australia's shipwreck artefact and is one of very few 'objects' on the Victorian State Heritage Register most valuable The LOCH ARD shipwreck is of State significance – Victorian Heritage Register S 417. Flagstaff Hill’s collection of artefacts from LOCH ARD is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history. Unrestored table spoon from the wreck of the LOCH ARD. The spoon design has a flattened fiddle-back handle, with a thin stem or shank, flared collar, and a shallow rounded bowl. The spoons metallic composition is a thin layer of brass alloy which has partially corroded back to a nickel-silver base metal. Approximately 25% of original plate remains, 20% bears sediment, and 15% is covered by blue-tinged white powdery substance. Outlines of four makers marks are visible but details are unclear. flagstaff hill maritime museum, shipwreck coast, great ocean road, loch line, loch ard, mutton bird island, loch ard gorge, electroplated cutlery, loch ard shipwreck, william page and co, birmingham brass plating, table spoons -
The 5th/6th Battalion Royal Victoria Regiment Historical Collection
Domestic object - Silver plate
Silver plate with "Officers Mess 5/6 RVR OC Admin Coy By Maj W. Balanchine 31 Mar 95" -
Bendigo Military Museum
Headwear - CAP, PEAKED, RAAF, c.1939 - 1945
Item issued to Flying Officer Geoffrey Wilkin NEVILLE No 438263 RAAF. Refer Cat No 3291 for his Service History.Hat, RAAF, peaked, dark blue, front has red crown over set of wings & gold braid leaf depiction.uniforms airforce, raaf headwear -
Whitehorse Historical Society Inc.
Domestic object - Bread Knife
Serrated edge bread knife with curved metal handle.Standard U.S.A.domestic items, cutlery -
Kew Historical Society Inc
Headwear - Cream Silk & Lace Infant's Cap, 1880-1900
Originally designated as a bride's cap, and part of the Coombs collection, the cap has since been identified as an infant's capBelieved to be part of the Coombs collection, which was derived from early pioneers and land-owners in Studley Park, the silk and lace cap is a representative example of infants' clothing from the 19th century. Flat, cream-coloured silk and lace, lozenge-shaped baby’s cap (bonnet). infants' clothing, caps -
Wodonga & District Historical Society Inc
Headwear - Victorian Railways Guard's Hat
The Victorian Railways guard's hat would have been part of a uniform guards were required to wear as on-board train staff.The Victorian Railways guard's hat has local significance as it was donated by a Wodonga resident. It also has historic significance due to its relative rarity and representativeness as part of the uniform worn by Victorian Railways staff, as well as its relatively good condition. Dark blue/grey felt Victorian Railways hat with the word 'GUARD' in gold on the front of a faded brown band. The hat has the VR logo and size on the inner sweat band. "Superior /Quality /Fur Felt / VR 7 1/4" in gold letters on one side of the inner leather sweat band.victorian railways hat, victorian railways guard's hat, v.r., victorian railways uniforms, railways uniforms, railways guard's hat -
Whitehorse Historical Society Inc.
Craft - Framed embroidered sampler, 04/03/1831
Came from Glen Waverley, family home of donor Melva Horne nee RichardsonFramed embroidered sampler dated 1831. Worked by Sarah Ann Gauntless, aged 6 Triumph over death And must this body die? This mortal frame decay? And must these active limbs of mine lie mouldering in the clay? March 4 1831As abovesampler, biblical motifs, sarah ann gauntless, children's needlework, embroidery -
Flagstaff Hill Maritime Museum and Village
Domestic object - Cream Can, Malleys Ltd, 1920-1950
This small cream can was made by the Sydney firm of Malleys Ltd from the 1930s until the 1950s and came in various sizes. Malleys Ltd was established in about 1890 by Francis Malley (1863-1932). This firm was located in the Sydney suburb of Alexandria, in McEvoy Street. They manufactured items for use in the dairy industry, as well as for hardware related to building and plumbing. Many of the Malley dairy products were sold under the "Sunrise" name. Malley retired in 1912. In 1931 there were branches at Parramatta, Hurstville & North Sydney. This cream can was designed for domestic home use and was used to fetch cream from a dairy or retailer of dairy products between 1920 to 1950s. M Luscombe Diamond Creek on the nameplate suggests this is the farm dairy that supplied the cream the can would hold and that they were the owners of the can. This dairy no longer exists as the area is now a housing estate.Cream can, round metal container with fitted lid and carrying handle. Can has a short wide neck. Body has embossed letters and an attached metal nameplate that has been soldered. Made by Malleys. Embossed raised letters "MALLEYS". Text on nameplate ""M LUSCOMBE / DIAMOND CREEK " warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, malleys, domestic object, cream can, dairy container, diamond creek, m luscombe -
Whitehorse Historical Society Inc.
Domestic object - Cushion Panel, 1940s
Item donated by R.W.T. Rowland, and was sent to the wife of a friend while serving in the 2/7th Battalion A.I.F. Middle East.|From the Returned Serviced League, Mitcham, 26 McDowall Street (cnr Harrison Street) closed in early 2014.Velvet square material 50cm x 40cm with 30cm x 40cm handpainted Oval Painting of the 'Blue Mosque in Jerusalem'handcrafts, hand painted, domestic items, furnishings -
Bendigo Historical Society Inc.
Domestic Object - CHINA TOILET BOAT
China toilet boat (English?) of elongated 'oval' shape. Bottom piece has two ridges to make three (low) 'sections' in base. Flower motif on top and sides. Inscribed catalog number U4.702.2domestic equipment, containers, toiletries -
Diamond Valley Vietnam Veterans Sub-Branch
Craft - White Cross, McCarthy, July 2016
One of 521 crosses placed in lawns of The Shrine, Melbourne, on 18th August 2016 as part of Victoria's 50th Anniversary of the Battle of Long Tan - each cross carries the name of an Australian soldier killed in the Vietnam war and a red poppy made by the wife of a Vietnam veteran.A poignant reflection of a life lost whilst in Service in Vietnam.White cross with name and service number with a red poppy attached.John Noel McCarthy, Service No. 3112702vietnam, vietnam war, diamond valley vietnam veterans sub branch -
Glenelg Shire Council Cultural Collection
Domestic object - Dinner Plates - Maretimo, n.d
3 dinner plates, cream vitreous china with pale blue 'Maretimo' and 2 blue lines around lipFront: 1728 impressed into china Back: Maker's stamp, green -
Bendigo Historical Society Inc.
Domestic Object - H.M. LEGGO JAR LID
Metal jar lid with the words H. M. Leggo & co. ltd. Est.d 1881 Bendigo, Victoria, Australia.business, retail, h. m. leggo -
Whitehorse Historical Society Inc.
Domestic object - Butter Churn
Large lidded wooden box with metal turning handle on outside. Inside it has a curved bottom and a paddle wheel tuned by the metal handle.TIfood technology, dairying, rural industry, livestock -
Melbourne Tram Museum
Domestic object - Coaster set, Paul Stephen-Daly trading at Louchrilau Nominees Pty Ltd, c1984
Set of 4 drink coasters, with a blue felt back gold plastic front with an impression of a Melbourne tram contained within a black finished cardboard box. Each coaster has the imprint of the Melbourne Tourism logo, 150 years of Melbourne, produced for the Victoria's 150th celebrations 1984-85. Box has the Australian Made logo in gold printing. The coasters feature: Z3 class - 1980 - has a Stephen Daly trademark logo on the rear. W2 class - 1927 R Class - 1266 (Melbourne cable tram) - 1885 x 2 No. T class - 1917 Coasters finished with square corners, while those of the earlier production finished with rounded corners. Also within the box are the earlier produced coasters (see Reg Item 1835) of the A class and X class trams. Produced by Paul Stephen-Daly trading at Louchrilau Nominees Pty Ltd. No contact details See also Reg Item 1835 for another set of 5 and the A and the X class trams.trams, tramways, souvenirs, melbourne -
Wangaratta RSL Sub Branch
Headwear - Army Beret, Beret Manufacturers Pty Ltd
Australian army issue khaki green beret - In all service branches, the beret is "bashed" to the right and a badge or insignia is worn above the left eye. In the army, all units can wear them with certain units wearing unique ones. No further details are known about the item.Khaki green beret with gold metal badge Badge - The Australian Armyaustralian army, beret -
Numurkah & District Historical Society
Furniture - Hall Stand
Cane hall stand with mirror, 2 hooks and 2 shelvescane, hallstand, furniture -
Brighton Historical Society
Headwear - Hat, Beret, circa 1956
This beret was worn by Marlene Austin, nee Trenberth in 1956 as part of the uniform of an official driver for the Melbourne Olympic Games. Marlene, who was living with her parents in Brighton at the time, took leave from her job as a stenographer to work as a driver at the Olympics. She drove officials and dignitaries from a variety of nations (including Thailand, Italy, Cuba and Sweden) to and from events, collecting a number of souvenirs, including a Venezuelan pennant and a pair of earrings gifted by the Thai delegation. Marlene's family have lived in Brighton since 1941, when her parents moved into a house at 15 Moffat Street. The house remained in the family for more than 75 years, before it was sold in 2018.Green wool beret featuring an oval-shaped white patch embroidered with the five Olympic rings. Grey lining.Label in lining, cream with yellow text: "COMMONWEALTH GOVERNMENT CLOTHING FACTORY / MELBOURNE" Stamped on top of this text in black: "7⅛"marlene pearl austin, marlene pearl trenberth, 1950s, 1956 olympic games, olympic games, beret -
The 5th/6th Battalion Royal Victoria Regiment Historical Collection
Domestic object - Silver Plate
Silver plate with "WO1 S Gaunt" -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Domestic object - plate
ceramics, porcelain -
Flagstaff Hill Maritime Museum and Village
Domestic object - Stove, 1850-1890
In the industrialized world, as stoves replaced open fires and braziers as a source of more efficient and reliable heating, models were developed that could also be used for cooking, and these came to be known as kitchen stoves. The first manufactured cast-iron stove was produced at Lynn, Mass., in 1642. This stove had no grates and was little more than a cast-iron box. About 1740 Benjamin Franklin invented the “Pennsylvania fireplace,” which incorporated the basic principles of the heating stove. The Franklin stove burned wood on a grate and had sliding doors that could be used to control the draft (flow of air) through it. Because the stove was relatively small, it could be installed in a large fireplace or used free-standing in the middle of a room by connecting it to a flue. The Franklin stove warmed farmhouses, city dwellings, and frontier cabins throughout North America. Its design influenced the development of the pot-bellied stove, which was a familiar feature in some homes well into the 20th century. The first round cast-iron stoves with grates for cooking food on them were manufactured by Isaac Orr at Philadelphia, Pa., in 1800. The base-burning stove for burning anthracite coal was invented in 1833 by Jordan A. Mott. The subject item is a mid to late 19th century settlers stove probably of Canadian manufacture imported into Australia around this time. The stove gives us a social snapshot into what life must have been like for our early colonialists using this device for heating and cooking in their meagre homes. Cast iron stove with four-legs, 2 plates on top and a hinged front door. The door has been cast with a maple leaf design and the sides have a pattern cast into them.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, stove, domestic heating, domestic cooking, heater, cooking unit, pot belly stove, wood fired stove, wood stove -
Mont De Lancey
Domestic object - Hand towel
White,cotton, square-patterned hand towel with a spok edged hem on one end and a crocheted, flower pattern edge on the other.bath linen, hand towels, towels -
Bendigo Military Museum
Craft - CRAFT WORK, HMAS, Post WW2
Pressed copper image of HMAS Bendigo. Pressed on timber with cork print plastic on back.Stamped on starboard side: “J187’ In black texta in back: “To my skipper in Bendigo 1942 - 1943 thanks Griffo from Ric. Rigg. Hopper. We all went through rough - good time together & were a happy united crew. Thanks to Management”craft, copper, hmas, bendigo -
Whitehorse Historical Society Inc.
Domestic object - Coupon, c1947
Issued to Doris Pratt, Main Road, Doncaster East.|Ordinary Ration Card Number V A 843496|Special Clothing Coupon Issue No. V 50857|& coupons attached to card.Special clothing coupons issued by the Commonwealth of Australia in 1947. These were in addition to the ordinary ration coupons issued to people in general during and after the Second World War. They where issued for special purposes such as a serviceman on discharge or if people had lost clothing.Special Clothing Coupon Issue. Commonwealth of Australia 1947documents, cards