“Penlon was founded as Longworth Scientific Instrument Co. Ltd, in 1943, in Oxford, by personnel from the Department of Anaesthetics at Oxford University.” (Ref. Retrieved from URL 2015: http://www.penlon.com/en/us/about/history.html ) Magill type blade to fit Longworth handles adult size without light bulb and without hinge at the back of the blade. Visible dust veil over its surface with presence of small oxidation spots mostly over the blade canal and base. Almost non used contact studs on base and lateral side at the light bulb connection. It has stamped on the blade base the fitting type name and the place where it was made.Stamped at the fitting base of the blade in cursive writing, Longworth Stamped at the fitting base of the base in capital writing below the previous text, MADE [I]N ENGLAN[D] longworth, magill, blade, adult blades, penlon

Cream coloured metal tin with hinged side and manufacturer's information in red and black printed text on front of tin. Inside tin are twelve (12) needles on a metal tray which is wrapped and sealed with a plastic covering.hypodermic, needle, syringe, unimed, switzerland

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone.The subject item is believed to date from around the mid to late 20th century and is regarded as a modern item. The maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture. Compass saw blade with wooden with open handle blade attached with wingnut lever at side to adjust long narrow blade Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood cutting, wood saw, cross cut saw, cabinet makers tools, wood working tools, tool

Brace is a U shaped frame with a wooden handle in centre, a round metal wheel at one end and a metal handle at the other end. Bits are corkscrew shaped and sharpened to make a hole in wood.trades, carpentry

Jig for holding a saw in the vice whilst it is being sharpened. Tools are a file to sharpen and a bending gauge to "set" the saw teeth alternately each side of the centreline.Home made jig in fair conditonsaws, sharpening, jig

Wooden mallets are usually used in carpentry or by a cooper to knock wooden pieces together, or to drive barrel bungs, dowels or chisels. A wooden mallet will not deform the striking end of a metal tool, as most metal hammers would. It is also used to reduce the force driving the cutting edge of a chisel, giving better control. Hardwood mallets are also used by a cooper to knock bungs or other wooden parts of a barrel in place.A significant tool a carpenter or cooper would use to knock wooden staves or furniture parts in place without damaging the soft surface of the timber being used. Item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Mallet large with wooden handle attached to wooden head with 2 metal ferrules at top and bottom of head Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, coopers tools, wooden mallet, barrel bung, carpenters tool, hammer

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden objects. Traditionally, moulding planes were blocks of wear-resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other workers to pull the plane ahead of the master who guided it. John Moseley & Son: Records indicate that before 1834, the firm is listed at number 16 New Street, London and according to an 1862 advertisement the shop had been established in New Street since 1730, The Sun insurance records from the time show that John Moseley was the possessor of a horse mill in the yard of his premises, which means that some kind of manufacturing was taking place, as the mill would have provided power to run a saw or perhaps a grinding wheel so the probability is that he did not just sell tools, he made them as well. John Moseley died in 1828 and his will he names his four sons: John, Thomas, William and Richard. To complicate matters he also had brothers with the same first names; brothers Richard (of Piccadilly) and William (of Peckham Rye) are named as two of the executors. Brother Thomas is not mentioned in this will, but became a minister and was one of the executors of brother Richard’s estate when he died in 1856. From John’s will, we also learn that, although the shop was in New Street, he resided in Lympstone, Devon. The family must have had a house in that county for quite some time as both sons Richard and William are baptised in Devon, although John and Thomas were baptised in London. In the 1841 and 1851 census records, we just find William in New Street, but in 1861 both William and Richard are listed there as toolmakers. That Richard was staying overnight at New Street was probably just accidental as in 1851 and 1871, we find him with his wife Jane and children in Clapham and Lambeth respectively. In 1851 Richard is listed as “assistant clerk cutlery warehouse” and in 1871 as “retired plane maker and cutler”. Although the actual place of work is not stated, one may assume he worked in the family business. 1862 is a year full of changes for the firm. In that year, William had a new property built at 27 Bedford Street. In the catalogue for the 1862 International Exhibition, 54 Broad Street (later 54-55 Broad Street) is listed for the first time, which may very well coincide with the split of the business into a retail and a wholesale branch. Around the same time, they must have moved from New Street to 17 & 18 King Street because their manufacturing premises had been pulled down to form the New Street from Cranbourne Street to King Street. In January 1865, William died and Richard continued the business. In 1867, the partnership he had with his son Walker and Thomas Elis Hooker, is dissolved. Richard continued tool making at King Street and Bedford Street. Richard retired somewhere between 1867 and 1871, but the business continued. The business is taken over by W M Marples & Sons and tools continued to be made in London until 1904 when manufacturing relocated to Sheffield. A vintage tool made by a well documented company, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item. Moulding Plane . J Moseley. maker and R Knight & J Heath also stamped stamped (Owners)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath, moseley

Industrial Forge from Newport Railway WorkshopsIndustrial Forge is an excellent example of equipment used in the early 19th century through to the mid 20th century for industrial iron working. It directly links a fabrication method that is widely used across several of the other collection pieces.Large Industrial Forge made of cast metal and wrought ironNo markings or inscriptions puffing billy, industrial forge

In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Beechwood & Metal, 5/8” Cove, Moseley & Son London. Stamped ‘10’. Also stamped with owner name ‘G. Greenwood’, with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘9’ added on entering the collection in 2010.woodworking tools, moulding planes, burwood road — hawthorn (vic.), bertie greenwood, carpentry

Pender Bros began in 1892 in Maitland New South Wales who supplied beekeeping supplies to the local beekeepers and later to beekeepers Australia wide. In the early 1970s was the largest factory in the southern hemisphere. In the late 1970s Pender Bros sold the beekeeping business in the late 1970s to the workers of Pender Bros and the name changed to Pender Beekeeping. The business moved to Rutherford New South Wales. The business was sold and changed to Pender Beegoods around 1989. In late 2002 it changed hands again to Pender Beekeeping Supplies and moved to Cardiff, Lake Macquarie New South Wales.Metal cylinder with hinged lid with spout on top. Cylinder for containing smoking medium connected by hose (missing) to small bellows on base. Marked on base with Pender Bros Ltd Makers West MaitlandPender Bros Ltd West Maitland (New South Wales)bee keeping

Used by students in the maintenance of the Burnley Gardens2 dutch hoes green with varnished handle labelled James (newer) and blue (well used) - used by the studentsJamesgarden maintenance, students, hoe, tool, dutch hoe, burnley gardens

Used as a shape for making shoes.trades, blacksmithing

Cast Iron gold mould. Mould used in gold pour to shape ingot. Rectangular shape mould with rectangular handle.gold mines, mining equipment, gold mould

pittock saddler's box: six metal spikesnil

Belonged to donor's father and used by him. Later used by donor until the advent of electric soldering irons.Long wooden handle with metal bar attached to shaped Copper piece.trades, plumbing, tinsmithing

component of lowering and lifting a bucket into the mineChain of 4 links with swivel fittinggold, mining, carrying, carting ore

Planes were used to finish wood, smoothing the surface, removing tool marks, and helping pieces of wood to fit together.Fair conditionplane

Metal intravenous needle. Needle has a gold coloured dial and fittings at one end, and a straight hollow shaft ending in a sharp point. The word 'CONTRACIO' is engraved on the needle fittings.'CONTRACIO'surgery

The drawing board was used to prepare drawings of the parts of the boat so the boat-builders knew what to make.Wooden drawing board, tee square and instruments

The tenon saw is used for fine cutting, usually across the grain of the timberFair condtion

'Magic cream tube' - device for siphoning off the cream from bottled milk where the cream has risen to the top. Made in England ca. 1940. Original card with instructions for use. Patented.domestic equipment, food storage & preservation

Cast iron shoe last broken fromNil triple stand

A curved steel long bladed hand sickle with a turned wooden handle which has a lined pattern on it.agricultural tools, sickles, tools, agricultural equipment

Three cut-throat razors, boed units in deteriorated condition: 22b - box marked Pittock,blade marked Bengall, manufacturers name on reverse side T. R. Cadman & Sons, Sheffield England 22c - red box has remains of Sheffield England marked on the smaller end of box. Blade is damaged and rusted. Blade black handle is notated with Bengall, while blade itself is etched Made Specially for A. Edments Pty. Ltd.; reverse notes manufacturer as T. R. Cadman & Sons, Sheffield England 22d - box has no discernible markings, but has minor taped repair on larger section. Black handle is unmarked, blade is marked Bengall, the reverse notes manufacturer as T. R. Cadman & Sons, Sheffield England. Items stored in Pittock coach builders box, reference 13000.

This type of steriliser was in use from approximately 1907 onward. Designed for surgeons who frequently moved from hospital to hospital. The body and lid of the steriliser were made from one continuous piece of metal to produce a germ-free surface. Dr Mitchell Henry O'Sullivan worked in the Victorian country town of Casterton as a general practitioner from 1919 until his death in 1977. He also practiced obstetrics. His son, Dr David More O'Sullivan donated his obstetric bag and its contents to the College in 1999. The bag and contents are a unique time capsule of the type of instruments and pharmaceuticals used in the inter-war period.Metal instrument steriliser. Consists of a rectangular metal container with lid, an internal metal tray, and two spirit burners. The lid has a small wire handle at either end. The internal tray also had two handles and in perforated with holes to allow for drainage. The upper edge of each burner has a series of eighteen holes in the rim. disinfection

Jonathan Harris operated a winery on the banks of the Axe Creek, Axedale in the 1850s.A pitchfork with three Metal prongs that are one centimeter diameter at the top of the handle and taper to a point, the two outside ones are 34 centimetres long and are 16 centimetres apart they curve to the top of the handle, the middle one is 30 centimetres long and is joined the other two at the top of the handle. The three prongs curve away from the handle to 14 centimetres from the line of the handle. The wooden handle is four centimetres diameter at its widest and tapers to three centimetres, it is135 centimetres long. Part of the Harris Collection.harris collection, pitchfork