Fuse wire loops on cardboard card which has John March & Con P/L Electricians, marked.Fuse wire card - Controlled vehicles, City and suburbs/ Immediate breakdown service, Electricians, Est 1906. John March & Co P/L, 43-45 Hancock St. Sth Melb. Light, ring 697422, Power, Prompt Personalised Attention. Installations & alterations, Australia's Oldest Electrical Contractors.electrical technology, appliances & accessories

Bootmakers tool used for making eyelets in leather goodsUsed and sold by Holden ca1900Wooden handle with steel spikebootmaker, tool

This green glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. A 'ponty' tool would have been used to form the shallow base. The mouth of the bottle was cut off from the blowpipe and a piece of soft glass would be added to the mouth to then form the lip. Bottles like this would usually be sealed with a cork.Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, green glass. Applied blop lip, deep scratch on neck. Shoulder seam, body tapers inward towards base. Wide heel, shallow base. Glass has ripples, creases, scratches and has a rough surface on the outside on one side. Sediment inside bottle.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, beverage bottle, green glass

Badge - Manufactured - brass? with gold plate finish on the rear and sides with a green and gold glazed paint finish with the Public Transport Corporation (PTC) logo and the "The Met" name and large vertical safety retained pin or clip attached to the rear. Has the words "Senior Officer" on the lower half of the badge. Badge contained within a plastic bag.trams, tramways, the met, badges, officers, ptc, public transport corporation

Small Spannertrades, mechanics

Small hand operated sewing machine with wooden handle to turn wheel which operates mechanism. Black iron baseTodd's Champion of Englandtextile machinery, sewing, domestic items

Plane Rabbet type, maker Mailloch. Stamped inscription.Stamped on the end" "G MAN" (twice, but one is incomplete). flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane, plane rabbet, rabbet plane, hand tool, g man

Baby scales, wicker basket with pink cushion in base sits atop metal scales and is detachable from base."Dr Harry Sinn"

Used by Estelle ManaughtanBlack round beauty case with pink lining containing 2 bottles and 1 jar, metal clip.cosmetics, beauty

“VX52199”. George Edward Krygger, enlisted 31.3.1941 age 39 years, discharged from the 2nd AIF on 13.3.1943 with the rank of Sapper in 2/16th Fld Coy RAE. Bayonet type for .303 Rifle..1) Bayonet. .2) Scabbard. .3) Bayonet frog, leather.1) On blade, “MA 130 1 44”, “XOA” .3) DENSIL DON 1941 D (arrow up) D”, “VX52199” written in blackweapons, bayonets

Blanket used by James Earl Brock Regt No 753, 6th BN, KIA 8.5.1915 aged 34 years.Woollen blanket, khaki type colour with a lighter colour stripe across.manchester-bedding, military equipment, accessory

A brass hook, decorated pressed edge, that was discovered by QC Binks while he was metal detecting for gold.bendigo, gold mining, qc binks, qc binks

Used for carrying ammunition. Part of the Collection of John Young. Cat No. 1181.3 for service details.Light brown canvas bag. Fold over lid with stud button. Reinforced at back.ammunition pouch, equipment

The item is standard issue shell dressing as issued for use in the Vietnam conflict. Note that it was made in 1942 for World war 2.Small cotton shell dressing used by medics in the Vietnam conflict produced by Johnson & Johnson Pty Ltd, Sydney June, 1942.Commonwealth of Australiavietnam, wound dressing, johnson & johnson, shell dressing, first aid, medical, bandage

The phosphoroscope was invented by Alexander Edmund Becquerel and used to measure the amount of time that a phosphorescent substance will glow after being irradiated by a brilliant source of light.The phosphoroscope consists of a round metal chamber with a pair of rotating discs inside, arranged so that no light can pass directly through the chamber. The discs have cut-out windows spaced equally at regular angular distances and are turned by the hand crank linked to a gear mechanism. The sample is placed in a specially designed holder into the small opening near the gearing, and it is exposed to the light source through the large rear condensing lens.Engraved on chamber: 'Phosphoroscope de E. Becquerel / J. Duboscq a Parisbecquerel phosphoroscope, phosphoroscope, optical instruments, phosphorescent, alexander edmund becquerel, jules duboscq, france

Pair of spectacles with gold rims in brown metal case.spectacles, spectacle cases

Small foot shoe last with instep slide and groove in foot space. piece missing in cast in instep slide in foot space. 2cast holes on sole. dirty and dusty12 cast on toe

This yearly train ticket was issued to Frederick Noble to travel from the Kew Railway Station to Melbourne. The Kew Branch Line ceased operations as a passenger service in 1952, the year after the ticket was issued. The Kew Railway Station was demolished in 1957. The ticket was donated to the Society by the City of Kew in 1989.Brass VR First Class Rail ticket issued to Frederick Noble. The token is dated 1.1.51. It names the owner as Mr F.H. Noble. Frederick Noble lived in Molesworth Street at this time and worked as a sports journalist on The Age.1-1-51 / Kew / Mr F.H. Noble / Melbourne 1-1-51 / Kew / First Class / Melbournekew railway station, frederick noble --molesworth street -- kew (vic.)

Possibly toy dairy equipmenttoys, general

Items issued to Edward Lane No 40676 RAAF. Refer 211P for his service history also 210, 212.3..1) Roll-up cloth sewing kit. .2) Shaving mirror of polished metal . Belonged to Edward LANE, R.A.A.F.toilet requisites - shaving, military equipment, sewing kit

Made of metal and wood. Set in a cabinet with a drop down bench that can be rested on the open door to extend bench space. Metal treadle and what appears to be an electric treadle and and electric light. Accompanied by original sales docket and Instruction booklet“Jones” Cabinet model Sewing machine Made in England Medium CS (Cylinder shuttle). Engraved pattern around edge of metalmachine sewing

An adze is an ancient and versatile cutting tool similar to an axe but with the cutting edge perpendicular to the handle rather than parallel. Adzes are used for smoothing or carving wood in hand woodworking, and as a hoe for agriculture and horticulture. Two basic forms of an adze are the hand adze (short hoe) a short handled tool swung with one hand and the foot adze (hoe) a long handled tool capable of powerful swings using both hands, the cutting edge usually striking at foot or shin level. Mathieson & Sons Maker: In 1792 John Manners had set up a workshop making woodworking planes at 14 Saracens Lane Glasgow. He also had employed an apprentice Alexander Mathieson (1773-1851). But in the following year at Saracen's Lane, the 1841 census describes Alexander Mathieson as a master plane-maker now at 38 Saracen Lane with his son Thomas Adam working with him as a journeyman plane-maker. Presumably, Alexander must have taken over the premises and business of John Manners. Now that the business had Thomas Adam Mathieson working with his father it gradually grew and became more diversified, and it is recorded at the time by the Post-Office Glasgow Annual Directory that by 1847-1848 Alexander Mathieson was a “plane, brace, bit, auger & edge tool maker” In 1849 the firm of James & William Stewart at 65 Nicolson Street, Edinburgh was taken over and Thomas was put in charge of the business, trading under the name Thomas A. Mathieson & Co. as plane and edge-tool makers. Thomas's company went on to acquire the Edinburgh edge-tool makers “Charles & Hugh McPherson” and took over their premises in Gilmore Street. In the Edinburgh directory of 1856/7, the business is recorded as being Alexander Mathieson & Son, plane and edge-tool makers at 48 Nicolson Street and Paul's Work, Gilmore Street Edinburgh. The 1851 census Alexander is recorded as working as a tool and plane-maker employing eight men. Later that year Alexander died and his son Thomas took over the business. Under the heading of an edge-tool maker in the 1852/3 Post-Office Glasgow Annual Directory the firm is now listed as Alexander Mathieson & Son, with further entries as "turning-lathe and vice manufacturers". By the early 1850s, the business had moved to 24 Saracen Lane. The directory for 1857/8 records that the firm had moved again only a few years later to East Campbell Street, off the Gallowgate area, and that through further diversification was also manufacturing coopers' and tinmen's tools. The ten-yearly censuses report the firm's growth in 1861 stating that Thomas was a tool manufacturer employing 95 men and 30 boys; in 1871 he had 200 men working for him and in 1881 300 men. By 1899 the firm had been incorporated as Alexander Mathieson & Sons Ltd, even though only Alexander's son Thomas appears ever to have joined the firm so the company was still in his fathers' name. In September 1868 Thomas Mathieson put a notice in the newspapers of the Sheffield & Rotherham Independent and the Sheffield Daily Telegraph stating that his firm had used the trade-mark of a crescent and star "for some time" and that "using or imitating the Mark would be proceeded against for infringement". The firm had acquired its interest in the crescent-and-star mark from the heirs of Charles Pickslay, the Sheffield cutler who had registered it with the Cutlers' Company in 1833 and had died in 1852. The year 1868 seems also to be the one in which the name Saracen Tool Works was first adopted; not only does it figure at the foot of the notice in the Sheffield press, it also makes its first appearance in the firm's entry in the Post-Office Glasgow Annual Directory in the 1868/9 edition. As Thomas Mathieson's business grew, so too did his involvement in local public life and philanthropy. One of the representatives of the third ward on the town council of Glasgow, he became a river bailie in 1868, a magistrate in 1870 and a preceptor of Hutcheson's Hospital in 1878. He had a passion for books and was an "ardent Ruskinian". He served on the committee handling the bequest for the setting up of the Mitchell Library in Glasgow. When he died at Coulter Maynes near Biggar in 1899, he left an estate worth £142,764.  The firm of Alexander Mathieson & Sons was one of the leading makers of hand tools in Scotland. Its success went hand in hand with the growth of the shipbuilding industries on the Firth of Clyde in the nineteenth century and the emergence of Glasgow as the "second city of the Empire". It also reflected the firm's skill in responding to an unprecedented demand for quality tools by shipyards, cooperages and other industries, both locally and far and wide.Hand Adze or Cooper's adze No 4 A Mathieson & Sons Glasgowflagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, adze mathieson & sons, cooperage tools, woodworking, barrel making, working timber, joiners tools, carpenters tools

Often used to support a leg when sitting out of bed. Also used when plastering a leg. Elevation of the limb to prevent swelling. Likely made on site by engineering team as there are no manufacturers markings.Stained timber, mid brown, 4 piece pyramidal shape, scoop for leg rest out of block at top. Horizontal stability panel. Assembled with nails, v shape cut out at base of side panels176.054 [black marker on side panel] / 176-/054 [blue ink on discoloured white sticker]orthopaedic, nursing history, alfred hospital nurses league, orthopaedic equipment

Used to protect axe head during transportationManufactured and sold by Holden and FrostBlack leather axe head cover with fastening straps attachedleather, axe head, cover