Rail Turning Bar Rail is heavy, sometimes as much as 120 lbs per yard. To assist in being able to move rail, a special turning bar was developed. Usually a long handle, on one end various features in the head allow rail to be moved Historic - Railway Permanent Way and Works - track equipment - Rail Turning BarRail Turning Bar made from cast wrought iron puffing billy, rail turning bar

Engraved with water buffalo and palm trees - souvenir beer mug on rear - from Koala Bar Phan Rang Sth Vietnam 1966-68From Koala Bar Phan Rang Sth Vietnam 1966-68koala bar, phan rang, mug

The whippletree consists of a loose horizontal bar between the draught animal and its load. The centre of the bar is connected to the load, and the traces, chains or straps on each side of the harness, attached to its ends. Whippletrees are used when pulling a dragged load such as a plough, harrow, or log. The whipple tree was attached to a scoop, which was used for building the 'Puffing Billy' railway and also for scooping out Emerald Lake.Wooden bar with metal hook at each end and a metal ring attached to the centre.

Vehicles pulled by a pair have a pole which attaches between the wheel pair. This draw bar belonged to a wagon or coach pulled by two horses. It would have been used in the Orbost district before modern transport.This item is an example of transport in Orbost before more moderrn road transport. This item is associated with that time.A wooden draw bar / pulling pole painted red. It was used for a wagon or coach and has a cross bar for attaching two horses.transport wagon-draw-bar pulling-bar

Louis Barelli sitting on a bumper bar and two younger men sitting in the car.Louis Barelli sitting on the bumper bar and two younger men sitting in the car.louis barelli, 1927 morris cowley, mitcham

WW1 ribbon bar belonging to Adde Cooper Soldier from Chiltern, service number 5002. WW1 Ribbon bar (trio) belonged to Adde Cooper, a,soldier from chiltern in the WW1 Campaign.WW1 Ribbon Bar belonging to Adde Cooper. Consists of : 1914-1920 Star, British War Medal and Victory Medal. Metal bar at the back with two studs for attachment to uniform above pocket (left side). chiltern, chiltern shire honor roll, ww1

Metal sickle knife Guard bar for an old horse drawn mower Historic - Farming Equipment - sickle knife Guard bar Metal - wrought iron sickle knife Guard bar for an old horse drawn mower puffing billy, sickle knife guard bar

Fir Tree Hotel was formerly the Commercial Hotel built in 1869 by Patrick Murphy. Fir Tree operated as a bistro/bar and B&BPhoto of Fir Tree Bistro and Bar- formerly the Commercial Hoteltrentham, hotel, fir tree, commercial

Medal issued by Italian Government to those who served in Ethiopia 1939-45.Round medal - a dark brown heavy medal, black and blue ribbon with bar.Front: D'ITALIA.IMP.DI.ETHIOPIA.VITT.EM.111.RE, Head Profile. Back: AFRICA ORIENTALE. MOLTI NEMICI MOLTO ONORE. Bar on Ribbon - Dagger with laurel.ww2, medal, ethiopia campaign

Donated by Margaret ScarlettGilt Medal on gilt bar & pin. Medal is of the Royal Visit to Victoria in 1954 & was presented to the children by the Government.(MEDAL) Queen Elizabeth 11 Duke of Edinburgh|E11R Royal Visit Victoria|(BAR) Presented to the Children by the Government of Victorianumismatics, medals - commemorative

Military uniform of an R.A.Regiment Captain, post Vietnam. The uniform is missing two ‘pips’ from both epaulettes, the date bar from the Vietnam Star, and the belt. Ribbon bar - Australian Vietnam Medal, Defence Force Service Medal with Clasp, National Medal, Republic of Vietnam Star. Donor served in 3rd Battalion, Royal Australian Regiment in VietnamOfficers Khaki Serge Jacket with brass buttons & rank insignia, and 4-medal riband barLabel inside - Cardone Apparel Victoria with care instruction and broad arrow. Hand written ‘14-4-80’ and ‘J A VANSWOL’ uniform, military, officers, vanzwol, vanswol

The Bar Lock typewriter is a patented design by the inventor and lawyer Charles Spiro in 1888. The keys are easily recognised and well spaced. Used by the typists working in the office for the State Electricity Commission of Victoria during the construction of the Kiewa Hydro Electric SchemeLarge, heavy black typewriter with white letters on the keys. Green matt finish with gold printing. c 1921 Model 22?Bar-Lock / Manufactured by / Bar-Lock Typewriter Co. Nottingham England/Supplied by / Richard Williams Pty Ltd. 193/197 King St. Melbourne At the back in gold print: "Serial / Number' rest too hard to read. typewriter, bar-lock, office equipment

Crest usually supplied on stick pin. Owner Isal (Veal) Gambetta who attended the school 1949 - 1951 stated students were allowed to create the bar pin at their own expense. Coloured Clarendon Presbyterian Ladies College crest on bar with pin and safety chainbadge, clarendon-presbyterian-ladies-college, isla-veal

BDSC - Bendigo & District Servicemen's Club. The Servicemen's Club 73 - 75 Havilah Rd was a Co - Operative of the 3 Bendigo RSL's being Bendigo, Kangaroo Flat & Eaglehawk Sub Branches. In 1977 the Bendigo, Eaglehawk, Kangaroo Flat RSL Co operative Society Ltd was formed with Mr Des Paterson as Chairman and Mr Jack Barnes as Secretary. The Co op owned the facility and the Bendigo & District Servicemen's Club was formed to operate the facility. It was built in 1978 and a liquor license was finally granted in August 1979 and opened. It was officially opened on December 19th 1979 by the Hon R.J. Hamer premier of Victoria. In the year 2000 the premises became the Bendigo District RSL Sub Branch Inc. Des Paterson was also on the of the BDSC Committee until 1984. He was heavily involved in the establishment of the BDSC. With the Bendigo RSL Sub Branch he was elected to Committee in 1973, Jnr Vice President 1974, Snr Vice President 1975, President 1976. Jack Barnes first Secretary refer Cat No 8040. Photograph BDSC. Roy Tayor was Bar Manager, refer Cat No 5687, Arthur Harridge Secretary 1979, Bill Nichols (William Bona) was President from 1978 - 80, he was made a Life member of in 1981. He was acknowledged as the driving force behind the establishment of the Club. With the Bendigo RSL Sub Branch he was elected to Committee 1961, 1966 - 68, 1970 - 72, 1974 - 81 (14 years) He was President 1968, 1972, 1979, 0ne year as Jnr Vice and 4 as Snr Vice President. Refer Cat No 149.Photograph B & W framed brown timber, photo shows 3 x men in suits with beer in hand, they are standing behind a bar, rear has hand written notes on.On rear, " BDSC - Roy Taylor Bar Manager - Arthur Harridge Secretary (79) - Bill Nichols Liquor Licence - formed 77 (Co op) built 78, licence 79 - 8621" brsl, smirsl, bdsc, servicemen's club

Dutch commemorative tile from city of Enschede in DrenteSouvenir brought by Dutch migrants on migrating.Ceramic tile, brown and black two-line border around gold, green, red and white design. Laurel leaves with red berries around coat of arms, scroll banner. Coat of arms white background with three red horizontal bars with two crossed red bars.On back two holes for hanging.Scroll inscribed ENSCHEDE. On underside: Delft with makers' mark. Coat of arms white background with three red horizontal bars with two crossed red bars.

Black and white photograph (2 copies)Includes C.E.Carter & Son, Ringwood Lamb Centre, Simpsons Bakery, Roberts Milk BarPhotograph taken from Town Hall roof and shows C.E.Carter & Son, Ringwood Lamb Centre, Simpson's Bakery, Roberts Milk Bar.

This object relates to Hugh Forrester BETHUNE. He was born on 15/11/1924 in Sydney, NSW. Hugh Forrester served in the RAAF (430155) enlisting on, 01/01/1943 in Unknown before being discharged from duties with the 9 AIRCREW HOLDING UNIT as a RAAF Non-Commissioned Warrant Officer (WOFF) on 26/02/1946. Hugh Forrester BETHUNE was not a prisoner of war. Hugh Bethune was awarded the 1939-1945 Star, Australia Service Medal 1939-1946, Defence Medal, France and Germany Star, War Medal 1939-1945.Enamel medallion in red, white and blue featuring three circes (blue outer, white inner and red centre) with text and a eagle motif; medallion attached via a ring to a bar shaped badge in similar enamel style with pin for attachment to garments on the reverse. Bar shaped badge: “PAST-PRESIDENT” Medallion: “1939-1945/ RAAF EUROPE”uniforms, ballarat rsl, ballarat

SKI TICKETS Before tows and lifts were introduced at Falls Creek, it could take skiers 20 minutes to climb to the Summit … but only TWO minutes to go back to the bottom. The arrival of tows, then chairlifts and T-bars changed the face of skiing forever. The first rope tow was constructed by Toni St. Elmo for the 1951 winter season. Bob Hymans installed a smaller tow for his guests at Skyline Lodge. Tows were still quite slow, so in 1956 Bob Hymans created his single chairlift. In 1958 the Village rope tow, designed by Albury engineer Jock Wilson, opened. It was financed by shareholders including Bill Griffith (Bowna Ski Club) and the Bridgford family (St. Trinian’s Ski Club). Several other tows followed including the Summit T-bar in 1961, built by Ron McCallum and operated by Alpine Developments Pty. Ltd. which was a company formed by C. H. (Bill) Bridgford. By 1982 Falls Creek was served by 16 different lifts or T-bars, all owned and operated by Alpine Developments (Holdings) Pty. Ltd. During the development of Falls Creek, different methods have been used to pay for the use of tows, lifts and T-bars … including metal tokens, single tickets, strips of tickets and season passes. The Falls Creek Historical Society Collection includes many examples of these items.These tickets are significant because they assist documenting the timeline of development of lifts at Falls Creek Tourist Area.A collection of tickets for use on the POMA and Saddle T-bar at Falls Creek. The Nursery or Baby Poma operated from 1964 to c2001 and the International Poma began operation in 1969. The Saddle T-bar operated from 1969 until 2000.poma ski lifts, falls creek passes, falls creek chairlifts, saddle t-bar falls creek

This mechanism was used to weigh sugarbeet at the Maffra Sugarbeet Factory. This is a Full Capacity Steelyard Weighbridge. It is accompanied, on the wall, by a diagram of a Proportional Steelyard, with weights on the bar. This one weighs to 10,000 kg.A Boemer weighbridge mechanism. It has a series of cogs on the left with a handle that when turned lifts a large weight. Across the top is the weighing bar, with a moving weight. On the right side is a handle that when turned moves the weighing bar up or down. It has modern green paint on it.sugarbeet, instruments

In the Second World War the Female Relatives badge was issued to the nearest female relative of members of the RAN, the AIF, including members of the Australian Army Nursing Service and the RAAF on active service abroad. Stars displayed on a bar suspended below the badge represented the number of relatives involved in the War effort.The badge on display was issued to Nora Marjorie Fielding, whose husband VX79262 Pte Donald Fielding, served with Army Headquarters Signals Regiment in WW2.A badge with a safety chain and pin attached, long pin on back for wearing. Laurel wreath on outer rim with crown at top. Map of Australia in middle. A bar is suspended by two loops, there is one star fixed to the bar. Front. To the Women of Australia. Back. Issued by the CWlth of Australia A123489 Angus and Coote 1942female relatives badge, ww2, homefront

The two Thonet black bar stools were purchased by Patricia and John Davies at the same time as the new black Thonet dining chairs, to replace the worn blond wood Thonet dining chairs that Patricia and Robin owned. (The wicker seats have been repaired more recently.)Set of two bar stools with black legs and circular seat covered in wicker.walsh st furnishings, robin boyd

Female Relative Badges were issued to the nearest female relative to those on active service overseas during the First and Second World Wars. The star on the bar indicated the number of relatives serving. Silver-coloured Badge surmounted with crown edged with leaf design, inscription surrounding inner wreath of leaves & Australian bar suspended on loops with chain. 7-pointed star on bar. Pin on back for fastening. NB: Star indicated no. of sons serving NB: ID No. on reverse: A109990.To The Women Of Australianumismatics, badges

Photograph of 4 Junior Legacy teenage boys using parallel bars. For many years Legacy provided gymnastics classes for Legacy boys and girls at Legacy House. Their skills and prowess were exhibited at the Annual demonstration. The names from left to right are: Don Scott, Bruce Grigg, Douglas Grigg and Roger Falahey. The date could possibly be 1951 due to the text 51 on the back. A record of a Junior Legacy class preparing for a Legacy demonstration.Black and white photo of 4 boys exercising on parallel bars.Marks on reverse: the boys names in blue pen. Illegible mark and 51 - it may be 1951?boys' classes, exercise classes

Badge was given to mothers who had children serving on active duty in WW2. The number of stars on the bar signified the number of children serving. The number on back allowed traceability.Circular black badge with bar hanging off. Bottom with one star. Pin on back. Small crown on top of badge. Engraved "To the Women of Australia" and on back A.219253 and issued to Commonwealth Government.passchendaele barracks trust, badge, ww2

This is part of a crosscut saw raker/jointer/guage set used to bend the tip of each cutter tooth for cross cut logging saws. The logging saws used in the early 1900's for the clearing of forests required constant sharpening of their "cutting teeth". The logging of forested areas during these times was very much a "hands on" method of either one or two men by the use of saw or hand axe. This item was used by the surveyors commissioned by The S.E.C. Victoria Kiewa Hydro Electricity Scheme project mapping the relevant Alpine region. Chain saws, chain and ball(clearing) and bulldozing methods came in the mid 1900's.This particular saw sharpening method was used by surveyors laying down boundaries for the S.E.C. Victoria Hydro Electricity Scheme (1920's). This item was given to a local Kiewa Valley lad who accompanied the initial surveyors. The lad was responsible for the tendering and feeding of the surveyors "pack horses". Surveys work during this period and in these dense mountainous terrain of the Victorian Alps was both exhausting and hazardous. Overnight accommodation at various log cabins was not always possible and swag/tent alternative was the "fall back".This cast iron Spring Setting tool has a main body of angle iron contours with one end tappered into a flat circular extension with a slit (3/32" wide) running from the top to nearly the centre(15mm). This slit is to allow the bending of each "cutter tooth" of the cross cut saw. The "bottom of this slit has a semi circular ending. Protruding from one side of the bar body, and close to the "slit" is a tounge like extension (wedge) to fasten the spring set tool into a tree stump. See KVHS 0090 (A) for its Raker/Jointer saw sharpening guage set partner. Also see KVHS 0090 (C) for the associated wrench. On one side of the bar "DISSTON U.S.A."hand tool, saw, sharpening method, tree felling