This is a small commercially made tram model. Its design appears to be very loosely based on a Melbourne W Class tram design. The motorman’s cabin is realistic, but the body with its centre doorway does not look like any known tram designs. The wheels and their arrangement at the very ends of the tram are not realistic at all. No details of the maker, or where or when the model was made. Demonstrates making tramcar models for decorative purposesNickel plated steel model with operable wheels at either end. Two copies held.models, trams, tramcars

A brown hard cover reference book, designed for use by Motormen, Inspectors and Depot Workers, by W.A. Agnew.Stamped on first page; Agents for Western Australia. H.B. ALBERT & CO. Book & Music store 20 to 38 Central Arcade, Perth.

Pamphlet produced by Yarra Trams at the time of the construction of the first 50 E class tras. Gives design features, where being built, initial use on route 96, changes to depot allocation of trams, and other network changes. E class trams commenced running during 2013.Yields information about the introduction of the E class tram in 2013.Pamphlet - 2 fold DL full colour.tramways, tramcars, e class, route 96, new trams

Report - 14 colour A4 sheets + two card covers bound with white comb binding titled "Comeng (Victoria) Light Rail Vehicles", detailing the trams or light rail vehicles built for Melbourne. Details the company, its capability, plant in Dandenong, Design using CAD systems, tram production photographs, details of the B class, A and Z3 along with description and engineering details including drawings of each unit.trams, tramways, comeng, commonwealth engineering, b class, a class, z3 class, tram bodies, bogies, light rail, tramcars

Booklet or pamphlet - titled "Comeng Z3 Tram" detailing the design, features, construction and equipment on Comeng tramcars including the monometer on each bogie, braking, interior seating, control systems, technical information. Equipment by AEG-Telefunken. Has photos of 117 and 120 in service and 119 on front cover. Book c1980, first car into service 116 in Sept. 1979, 120 late December 1979. Yields information about the Comeng built Z3 trams used in Melbourne.Booklet or pamphlet - 12 A4 pages + card cover, full colour.trams, tramways, z3 class, comeng, new trams, aeg

Spiral comb bound folder, with silver card covers, titled "Comeng" providing details of the Comeng rollingstock manufacturer. Details their locations, company structure, locations, engineering and design work and Comeng products in Service, trains, trams, buses and other equipment. Includes design details and photographs of Z, A and B1 class tramcars. Produced by John Dunn of Comeng in 1987..trams, tramways, commonwealth engineering, comeng, tramcars, construction

One of the earliest electric trams in Victoria. This open tram design was commonly known as 'toast rack'. One is preserved , MMTB V Class 214, and resides at Hawthorn Tram Museum. Currently displayed as NMETL No. 13Yields information about the Brill built toastrack tramcars used on the North Melbourne Tramways and Lighting Co. One of 5 open toast rack trams built by J G Brill & Co Ltd for the NMET&L Co Ltd. Builders photo at their workshop in 1906tramways, trams, brill, nmetl, tram 214, tram 13, v ckass

PCC 980 was an all-electric tram prototype built by the MMTB to demonstrate a tram based on a USA design. Only one was built due to import restrictions at the time.Yields information about the tram soon after its completion.Photograph, Black and White, of the PCC 980 at Preston Workshops June 1950. Print and photograph by Sutcliffe of 94 Elizabeth St Melbourne.Has Sutcliffe Pty Ltd stamp on rear - No. 8853. In ink on the rear: "M&MTB PCC-980, Preston W/S June 1950" tramways, tramcars, pcc class, tram 980, preston workshops, new trams, trams

The Department of Transport produced the Melbourne " Next Generation" G class tram badge to thank the team members involved in its design and production. As many of the team members came from Germany, the German translation was included on both sides of the card. Note from one of the production team was: "Staff from the Department of Transport and Planning – Next Generation Trams project team led a self-funded initiative to produce a commemorative badge of the Melbourne " Next Generation" G class tram. These were issued as gifts to persons involved in its design and production to mark the start of series manufacturing. The card it is mounted to is typeset in the proprietary “Network Sans” font, in both Australian English and Austrian German; including a special translated version of the Next Generation Trams Project logo. This was a gesture to recognise several key Alstom staff involved in the project being loaned from Vienna.”Demonstrates a badge featuring the Melbourne G class.Metal enamel badge with pin retaining clip attached to a printed card sheet.tramways, tramcars, g class, badge, new tramcars, alstom

Used by drivers to control the brakes on an air-braked tram. Designed to fit a Westinghouse self lapping W type brake valve.An essential part for the control of an air-braked tramcar.Brake handle or key consisting of cast steel handle and a welded section that fits into the brake valve. The angled section allows the handle to be removed when the brake is fully applied.tramcars, trams, brakes, westinghouse, drivers

Item used to operate and record the time in the Cincinnati Time Recording clock. This type of clock was used by the MMTB in the 1930s. The key would be issued by the depot staff to crews for use in the clock to record times so that they could be matched up against the timetable to see whether tram or bus services were running on time. Understood that this style of key was last used on the Port Melbourne bus route. The Museum has one of these clocks at its depot which was obtained from The Met in? The second photo shows the key in position before turning the handle around it. By the 1960's (or earlier) they were only used on the M&MTB bus routes. All the tram routes had M&MTB copies with a very different style of key. Only used on two man bus routes and the conductor held the key due to the half-cab bus design. On the tram routes the driver was responsible for the key and recording the time. The key number represented the crew's shift number. For a while towards the end of their use on the trams they were the Run number. This change led to many lost keys! See item 9568 for an example of the time recording clock itself.Demonstrates a Cincinnati "Bundy" time recording clock key.Key - or Bundy Clock key made for a Cincinnati Time Recording Clock comprising a circular brass section with a key number section secured by a screw at one end and a flat steel strip inserted into the brass section, with a hole at one end that could be placed on a hook. The steel strip is riveted into the brass round section. Two keys held.Steel section stamped "tramways" and "55" and "263"tramcars, tramways, bundy clock, cincinnati, time recorder clocks

Poster - A3 full colour printed on heavy paper, titled "Light Rail towards 2020", advertising an exhibition show casing the finalists in a tertiary design competition for a futuristic transport vehicle for the year 2020. To be held at the State Library of Victoria October 2006. See: http://www.butterpaper.com/vanilla/comments.php?DiscussionID=633&page=1 accessed 29-6-2017 and printed and stored with item. Sponsored by lab.3000, Alstom, Yarra Trams, United Group and the State Library of Victoria - has their logos.trams, tramways, tramcars, competition, alstom, yarra trams, united group

Newspaper clipping titled: The Age, 24/3/73 “It’s the new-look tram” Photo and text of Melbourne’s newest tram Minister for Transport, Mr Wilcox, look at model of new tram at Preston workshops. Mr S Bramich, electrical engineer, worked on project. Photo shows model of tram with full-size prototype behind the two men. Melbourne's new orange-coloured super trams have been designed for an era of one-man operators and women drivers. Cheaper to run. Passengers should find them more comfortable and faster. Will go into service early next month (April?). MMTB Chairman, RF Kirby said board would like to recruit women drivers for trams, especially new super trams. "...very keen to have women tram drivers. But union has objected." Kirby said board had no immediate plans for introduction of one-man operators but trams could be easily adapted. One-man operations could be used in off-peak periods. State Government recently approved calling of tenders for 100 new trams to replace Melbourne's oldest trams. 300 trams are 50 years old. New tram is 53 feet long and 8 feet 9 inches wide. Passengers will enter through front door and purchase ticket from seated conductor. Rear exit door. Improvements to new trams are:, forward boarding means all passengers have to pass conductor, reducing missed-fare problem costing about $1M per year, no running board and tram cannot move until all doors are closed. Reduce compensation payments to passengers for injuries, last year around $30K, faster acceleration and top speed of 45 mph, ventilating fans and heating during the winter, stop lights and flashing turn indicatorstrams, tramways, prototype tramcar, modelling, z class, preston workshops, minister for transport, mmtb chairman

Set of two black and white photographs of scrubber No. 4 at Preston Workshops. Scrubber No. 4 began as PMTT tram No. 96 in 1919, one of 5 tramcars delivered on November 1 1919 (numbers 92-97). A single-truck straight-sill combination tram built by the PMT and James Moore, Melbourne. This design followed conversion of "summer car" 49 (later G class) as a prototype. Tram 96 retained its number when control passed to the MMTB in 1920 and assigned as a K class. Shown as allocated to the Kew depot on 24 March 1928. In June 1929 tram 96 was converted to Scrubber Car 9A (later number 4). In 1934, works trams were re-numbered from their separate "A" suffix series to the same roster as passenger trams, using numbers 1-25 (left vacant by scrapped trams). Scrubber car 9A was renumbered as number 4. Shown as allocated to Hanna St depot on 9 June 1934 as scrubber 4, and also 30 June 1938. In November 1947 Scrubber Car 4 (ex-K class 96) was withdrawn and stored. September 11 1948 4 Scrubber K 1 Workshops In March 1950, Scrubber Car 4 (ex K class 96) was scrappedtrams, tramways, preston workshops, scrubber tram, pmtt, k class, hanna st depot, kew depot, tram 4

The article provides the operating background to the new type of bogie car then being built for the MMTB. Gives dimensional details, the basis of the doors and seating arrangements, and safety considerations. Has a drawing featuring car 369. This type was known as the "W class" tramcar. See also item 6923.Yields information about the Melbourne W class tram in 1925.Photocopy of an article titled "Standard Car for Melbourne Tramways" from the Electrical Engineer magazine - 15-9-1925. tramways, tramcars, mmtb, melbourne, w class, tram 369, design of new trams

Article provides the operating background to the new type of bogie car then being built for the MMTB. Gives the design basis of the tram and has a side elevation of the tram. This type was known as the "W class" tramcar. Refers to the Electrical Engineer (item 6922) as the source of the drawingYields information about the Melbourne W class tram in 1925.Photocopy of an article titled "Melbourne adopts three-door car as standard" from the Electric Railway Journal of the USA, Vol 67, No. 10, page 402. tramways, tramcars, mmtb, melbourne, w class, design of new trams

Radio transcript - 12 foolscap sheets, typed. Although not named, appears to have been prepared for or by Mr. Strickland describing "inside information regarding tramcars". Notes cable trams, conversion, sale of trailers and dummies or grip cars, the variety taken over from the trusts, design of new cars (180 in service at the time of the report), open cars vs closed cars, seating and standing capacity, speed, braking system, step heights, destination signs, lifeguards. Gives a description of Preston Workshops, finishing soon, description of the tramcar construction, roofing, painting, sourcing of materials, timbers, cost per tram of 3250 pounds, depots, breakdowns, overhauls, workshops, collision repairs in 1925, construction of 10 safety cars. Vicsig.net gives that X1 461 entered service in Sept. 1926. Pinned to the file by Robert on the rear of TMSV Raffle ticket is a note "Electrical Engineer 15/7/26 p35 "C. H. Wickham gave recent address broadcast on 3LO"In blue pencil in top left hand corner appears to be "Wickham"trams, tramways, tramcars, preston workshops, new trams, sale of trams, cable trams, destination roll, tram brakes, tramcar equipment, x1 class, w class, depots, radio stations

Specification or Tender Document - titled "Design, Manufacture and delivery of 100 only all-electric trams", and "Background Information and Preliminary Specification", dated June 1965. Bound into a brown foolscap card cover. Details the conditions of tender, conditions of contract, notes, specification, gives background information about Melbourne, dimensions, performance, drivers and conductors, trucks, wheels, brakes, electrical equipment, control panels and drawings. The drawings give a map of the system, typical city route, Glenferrie Road route (grade diagram), concrete track construction, min. radius curves, loading gauge, all-electric tram and mounting details for the trolley base, schedule of prices, tender form, form of contract, schedule of information to be provided by the tenderer. Comprises: 1 - Conditions of Tendering - 1 page 2 - Conditions of Contract - 4 pages 3 - Contents - 3 pages 4 - Notes for prospective tenderers - dated June 1965 5 - General nature of contract - 21 pages 6 - Appendix A - climate data - two sheets 7 - List of 14 appended drawings 8 - O.6887A - cross section of trolley wire 9 - P.13855 - Glenferrie Road, Longitudinal Section 10 - P.13856 - Wattle Park Route 11 - P.13857 - East Preston Route 12 - P13858 - Concrete track construction 13 - P13859 - Open track construction 14 - P.13860 - Paved ballast track construction 15 - P.13887 - Tram Route - locations of substations and section switches 16 - P.13888 - Minimum radius service curves to give minimum clearance between tramcars 17 - P.13889 - Grooved Rail - 102 pounds per yard and tire profile 18 - R10-301 - Loading gauge, proposed electric tramcars 19 - R9706K - Rolling stock data, tramcars 20 - R10306 - Collins Points Shifter - Wiring diagram. 21 - Schedule of data to be supplied by the tenderer 22 - notes on Automatic Points shifters - 2 sheets 23 - Tender prices and delivery periods - 2 sheets. See Reg Item 2266 for the 1972 version and 1583 for the August 1966 version. See Reg Item 4049 for associated newspaper cuttings. See file htd4667i1.pdf for scans of the drawings.In ink in top right hand corner - "Lees"trams, tramways, specification, tenders, z class, mmtb, melbourne

Report - 6 foolscap sheets, stencil cut and duplicated titled "Class W7 Tramcars", giving a detailed written description of the trams (1001 to 1040). References a photograph which is not included. Gives notes on the General Design, body construction, windows, doors, finishes, seats, motorman's compartments, sound insulation, ventilation, lighting, signalling, destination signs, trucks, wheels, brake gear, motors, current collection control equipment and dimensions. Notes the Authority of the Chief Engineer Mr. D. H. Eakins.trams, tramways, w7 class, tramcars, preston workshops, tramcar construction, specification

Set of 6 reports, photocopied onto heat sensitive paper from various magazines. Documents match the image numbers. .1 - .2 pages - Electrical Engineer - 15/8/1928 - "Rail Grinding Machine for Melbourne Tramways" - Grinders .2 - 5 pages - Electrical Engineer - 15/6/`1927 - "Workshop of the Melbourne Tramways Board" - includes a layout drawing - See Reg Item 3675 for a reprint of this document. .3 - 1 sheet - Electrical Engineer - 15/9/1927 - "Worm Driver for Electric Tramcars - new type of truck constructed by Melbourne Tramways Board" - fitted to X1 class cars. Has a sketch of the truck. .4 - 8 pages - The Electrical Engineer and Merchandiser - 15/11/1933 - "A Supervisory Control system for Traction Substation - Equipment designed for the MMTB" - written by C. L. Steele. .5 - 8 pages - "Institute of Engineers Australia" - Dec. 1943 - "Prolonging the life of the tramway rail" - by A. H. Blanch. Note some pages have handwritten additions where the copying is out of line. .6 - 1 page - The Electrical Engineer and Merchandiser - 16-10-1950 - "Noiseless bogie for Tramcars" - PCC bogies. - St Louis Car C B-3 Bogie.trams, tramways, mmtb, rail grinding, rail wear, track materials, grinding, preston workshops, worm drive, x1 class, substation, electrical engineering, electrical equipment, tramway per way, bogies, pcc class

Photograph, Black and White, of a drawing of the proposed VR tramcars dated 23-6-42. Has an outline of the proposed tramcar, with colours, lettering and monogram placement. Some overall dimensions given.In ink on the rear: "Melbourne Victorian Railways Proposed design for new tramcars 1942" and KSK stamp with number 'LWR-11"trams, tramways, vr, new trams, st kilda brighton, monograms, tram 52

Report - three foolscap sheets, titled "1041 Prototype Tram" outlining the basis of the construction of the prototype tram. Gives information on the trucks, control equipment, body frame, interior, doors and windows, heating and ventilation, lighting, destination equipment and other equipment. Notes the construction of the new trams by Commonwealth Engineering and the basis for the design from those of Gothenburg Sweden. Dated 21/3/1974trams, tramways, mmtb, prototype tramcar, 1041, new tramcars

Replica Builders Plate, sign - cast brass with raised letters within two raised lines and four screw holes in each corner. Black painted background. "Designed and Manufactured at the Tramways Board Workshops Preston" Two copies held, both within plastic heat sealed envelopes with small label "Replica $20-" Produced by Tony Smith of the MTPA, c2010, cast by Hasco Foundry, Ballarat.trams, tramways, signs, tramcars, tramcar bodies, mmtb, new trams

Digital image of a report in the Jan - March 2002 issue of Track & Signal, pages 90 and 91 titled - "How they meet a cost conscious market - How Alstom designed, manufactured and marketed the CITADIS". Written by Staff Writers. Gives information about the design, body testing, specifications and construction. Has a drawing of the tramcar.trams, tramways, c class, alstom, citadis, new tramcars, tramcar construction

Poster -"Welcome aboard your new look Yarra Trams" showing an artist impression of the proposed livery design scheduled to be implemented from 2010. Tram Z2 113 - not know if this tram was actually painted in this livery. The tram was withdrawn from service during 2015.Demonstrates and artists impression of a Yarra trams colour scheme or livery.A3 size sheet printed in full colour.tramways, tramcars, z2 class, tram 113, artist impression, livery, yarra trams

Poster titled "Melbourne's Painted Trams" with subtitle "Transporting Art", printed on one side of a single sheet of art paper, then folded in half, then folded in concertina style (6 panels), featuring the 15 Melbourne W2 class tramcars that were painted in the years between 1978 and 1982. Provides notes on the artists, their thoughts on the projects and details of the project. Sponsored by the Victorian Ministry for the Arts and Ministry of Transport. Notes that 14 of 15 trams had reached the end of their working lives and were to be auctioned on 7/12/1986, that No. 504, Clifton Pugh was to be donated to Museum of Victoria and that a new series of 20 painted trams were being sponsored. Poster prepared by Malpass and Burrows of the Design group with photographs by Stephen Hall and Regina Grant. Decorated trams, artists. Features trams and artists 525 - Les Kossatz 243 - Mirka Mora 504 - Clifton Pugh 503 - John Nixon 497 - Erica McGilchrist 567 - Peter Corrigan in 1978 and repainted by Paul Mason in 1982. 345 - Gareth Sansom 384 - Howard Arkley 234 - Andrew Southall 336 - Mike Brown 444 - Trevor Nickolls 502 - Rosemary Ryan 340 - Don Laycock 607 - Craig Gough 439 - Stewart Merrett 2nd copy added 2/6/15. Electric Traction, August 1979, page 135 has noted on the removal of the Japanese flags on tram 567 by artist Peter Corrigan.trams, tramways, transporting art, decorated trams, exhibitions, melbourne

White DL size envelope with two of the Oct 1989 Historic Tramway Stamps (Hobart and Brisbane), with a cancellation stamps, carried on Original route Box Hill on the date of the Box Hill to Doncaster tramway centenary - 14 Oct. 1989. Has the Australian Historic Tramways logo in the lower left hand corner. See also Reg Items 470 to 474 for other examples and associated materials and 510 for a Poster. On the rear are detail of the stamp issue, the designers and cover design. .1 - ditto - with cable car set, cancelled stamp - "STAMPSHOW '88 TRAM TPO 21 OCT 1989 Melbourne" .2 - ditto - with all five stamps and cancellation stamp of "SYDNEY TRAMWAY MUSEUM F CLASS TRAMCAR 11 OCT 1989 SUTHERLANDS NSW 2232"trams, tramways, stamps, australia post, box hill, doncaster, sydney tramway museum

Report - 104 pages, with orange card and plastic covers, bound with a black coloured comb binder titled "Single-ended tram operations - A Feasibility study". Looks at the background for the proposal, operational issues, including loading and unloading, a CBD loop, capital costs, traffic issues, implementation, vehicle design. Report notes it has many advantages and disadvantages, but the concept was supportive that single ended vehicles should be introduced. Report not dated as such, but discusses the ordering of new tramcars in 1977/78, dated c1977. See Also Reg Item 337. On front cover is a post-it notes commenting about report - see image. See Reg Item 4388 for the contract tender document for the Z3 class trams which included the option for a single ended tram.Stamped on cover and inside page "Discarded from PTC Library 19 Oct 1989".trams, tramways, single ended tramcars, mmtb, bourke st, collins st, turning loops, swanston st, william st