Framed invoice No. E.1675 dated 30/4/192? (assumed 1923), from Noyes Bros (Melbourne) Pty Ltd. to the MMTB for the supply and delivery of one(1) Brill double ended safety car with a Brill 79E truck, excepting wheels and axles. Provides details of price, and customs charges dated 9/1/1923. Has an accounting stamp with initials in blue pencil. Provides details of Noyes Bros contact details, order numbers and phone numbers. Framed in a wooden frame, glazed and card board back and hanging cord.trams, tramways, birney, mmtb, noyes bros, tramcar construction

Black and white photograph of CW5 684, route 70 outbound in Batman Ave. Ray Pearson's photo listing dates the photo as 1937. The CW5 tramcar was effectively a W5 tram using Brill 22E bogies or trucks as an economy measure during the mid-1930s. The trams were underpowered, with MMTB No. 15 bogies being fitted in 1956. Most of the louver sashes have been lifted, indicating a hot day.Yields information about a CW5 class tram and its fitment at the time with Brill 22E trucks.Black and white print with adhesive marks and photographers stamp on the rear.Has "R W O Pearson" stamp on the rear.tramways, tramcars, cw5 class, tram 684, route 70, mmtb, batman ave

Set of three drawings related to the Brill 22E Maximum Traction trucks: 1 - "Brake Rigging Brill Maximum Traction Truct No. 22E" - showing the dimensions of the levers and pivot points. For the relevant Geelong drawing T1647 see item 8044 2 - "Standard Pony Axle" - traced from MMTB drawing R3755 3 - "Pony Axle Box" - traced from MMTB drawing R1112 and dated in ink 28-4-1955Yields information about Brill 22E brake rigging and equipment.Set of three Drawings - dyeline print on plain paper with a brass clip in the top right hand corner.tramcars, brill 22e, pony axles, axles, axle boxes, brake rigging, ballarat, geelong, drawings

Set of seven Kodak white cardboard 35mm colour slides by Len Millar of the move of former VR tram No. 34 from Yarrambat to the TMSV site at Bylands on 18/4/1974. Reference June 1974 issue of Trolley Wire. Note the Brill 77E trucks i the background were obtained at the same time. These would have been 5'3" gauge and it would appear that the tram was placed on a set of MMTB No. 1 trucks. Len Millar advised 21-7-2021 - that Trolley Wire says that the tram was obtained from a private property on the banks of thee Plenty River at Yarrambat, It was perched on a steep slope only 50 metres from the house, but two kilometres in from the nearest road. The track out to the nearest road was steep, rough and akin to a “goats’ track”!trams, tramways, vr trams, recovery, transporting trams, tmsv, bylands, tram 34

Drawing of Melbourne Electric Supply Co. Ltd (MESCo) Geelong tramways - "Combination Car Mounted Brill E1B Special Radiax Truck" - trams 16 to 23, built by Pengelley & Co in Adelaide 1924-25. Details the tramcar elevation with dimensions, and shows the towbars. Drawing dated Jan 1985, prepared for the TMSV. Scale 1/4"=1' Second drawing is titled "Elevations of body Pengelley tram Nos. 20-23" - based on MESCo drawing GE-T9-8358. Drawing dated Jan 1985, prepared for the TMSV. Scale 1/4"=1' Yields information about the Pengelley built tramcars for Geelong.Set of Drawings printed on light brown paper with brown ink - Drawing GE-T9-8350 and GE-T9-8358trams, tramways, geelong, drawings, pengelley

Set of drawings and photocopies of sanding equipment on Ballarat Tramcars, provided to the Launceston tramway Museum for information.Copy of Correspondence with the Launceston Tramway Museum 31/12/2006 concerning sand ejector equipment fitted to Ballarat tramcars. Comprises: Covering letter dated 31/12/2009 Photographs of the Ejector unit with fittings - two views Photograph of the inlet pipe Sketch of the air inlet pipe - prepared by Warren Doubleday Prints of drawings - BA - T7 - 7654 - Ejector for Sand Box, Fabricated type - 21E truck, SEC 1938 - made from scans ex Microfilm BA - T7 - 7647 - Ejector for Sand Box, Brill 21 E Truck - SEC 1938 - cast type.tram, trams, tramcar equipment, sanding equipment, sand ejectors, letters

Set of two The J. G. Brill Company specifications for the "The Brill 77-E Truck" - four pages, printed on heavy semi gloss paper, giving an image of the truck or bogie, a photograph of a tramcar using them, details of the truck and its springing, dimensions, limitations, use and list of parts and their names. Has company details on the top of the Bulletin with international agencies listed - Noyes Brothers of Melbourne and Sydney and later on in Brisbane and R. W. Gardam of Perth. 745.1 - Bulletin No. 228 - dated 1917 - note spelling of Sydney as Sidney 745.1 - Bulletin No. 259 - dated 1922745.1 - has Noyes Bros. (Melbourne) Pty Ltd stamp on rear giving their address.trams, tramways, j c brill co, tramcar specifications, tramcar construction, 77e truck, trucks, bogies

Yields information about the drawings that were used by the depot or workshop staff as reference drawings. Has a strong association with the depot workshop staff. Yields information about equipment on Ballarat tramcars and Signalling.Folder containing 46 blueprints or Dyeline prints of SEC tram equipment drawings. Front of folder made from a cloth back sheet of paper extended to secure to a thick cardboard runner. Rear of folder made from an old tram advertising panel or cardboard sheet, cut to size and secured to a thick cardboard runner with a cloth backing on both sides. Sheets secured with three brass screwed clips. Front cover damaged in bottom right hand corner. Rear cover breaking apart on outside around cloth binding. Heavy dirt marks from “grease” on bottom half of rear cover. Contains 46 drawings which have been individually catalogued and numbered on the rear of each drawing within the folder. Some of the drawings have been folded. Reg Item Micro Film No. Old BTPS No. SEC Drawing No Title 4807 42/4 1 VB4/8103C Westinghouse T1F Controller Main Cylinder Segments. 4867 47/2 2 BA-T8-8128 Westinghouse 225N Motor Case Bolt 4830 22/3 B 3 BA-T7-7666 Half Ball Brake Hanger Link, Driving Wheel, Brill Maximum Traction Truck 22E 4868 44/3A 4 BA-T8-8113 Split Suspension Bearing for Type W225 Motor (Westinghouse) 4869 52/2 5 BA-T8-8158 Contact Tips for G.E. Compressor Controller 4818 52/3 6 BA-T8-8159 GE B-23 Contact Finger Tips for G.E. Type ‘B’ Main Cylinder 4870 6/1 7A BA-T3-6734 Brass Nut for Switch Mechanism 4829 6/2 7B BA-T3-6735 Tongue Clip Link for Switch Mechanism 4871 6/3 7C BA-T3-6736 Fulcrum for Switch Mechanism 4872 6/4 7D BA-T3-6737 Plunger for Switch Mechanism 4832 7/6 8 BA-T3-6754 Pivot for Switch Mechanism No numbers 9 or 10 4873 17/5 11 BA-T7-7639 Detail of Motor Pinion for Brill Cars 4831.2 21/4 B 12 BA-T7-7661A Half Ball Hanger Links – single bogie trucks 4874 21/6 13A BA-T7-7663 Axle Box Inner Spring Driving Wheels Maximum Traction Truck 22E 4875 22/1 13B BA-T7-7664 Axle Box Outer Spring Driving Wheels Maximum Traction Truck 22E 4876 22/2 14 BA-T7-7665 Body Spring Brill Maximum Traction Truck 22E 4830.2 22/3B 15 BA-T7-7666A Half Ball Brake Hanger Link Driving Wheel Brill Maximum Traction Truck 22E 4877 22/4 16 BA-T7-7667 Body Spring, Brush Maximum Traction Truck 22E 4820.2 22/6 A 17 BA-T7-7669 Wear cups for Half Ball Brake Hanger Links, Single & Double Bogie Trucks 4878 50/5 18 BA-T8-8149 Connections of Line Breaker and Ratchet Switch for use with Drum Controller 4879 74/6 19 BA-T13-8757/9 Signal boxes, Back of Panel Wiring and External Connections 4880 45/1 20 BA-T8-8116 Trolley Harp 4806 15/3 21 BA-T7-7625 Equalizing Lever, Fulcrum, Brill 21 E truck 4881 15/5 22 BA-T7-7626A Brake Beam Fulcrum Brill 21E truck 4808 16/1 23 BA-T7-7628 Pinion Remover, GE 201G and GE 202 motors 4882 16/3 24 BA-T7-7630 Spring Posts, Brill 21E Truck 4883 21/3 25 BA-T7-7660 Brake Shoe Holder, Driving Wheel, Maximum Traction Truck Brill 22E 4884 21/5 26 BA-T7-7662 Brake Rod Guide, Single Bogie Trucks 4885 22/5 27 BA-T7-7668 Brake Shoe Holder, Pony Wheel, Maximum Traction Truck Brill 22E 4809 42/2 B 28 BA-T8-8101 Trolley Wheel and Axle 4815 42/1 B 29 BA-T8-8102A Motor Suspension Bearing, GE 202 Motor 4796.2 42/5 30 BA-T8-8104 Connection Diagram WH 225N Motor 4886 42/6 B 31 BA-T8-8105B Motor Suspension Bearing, GE 201 Motor 4797.2 48/6 32 BA-T8-8137 WH T1F Controllers 4816 49/2 33 BA-T8-8138 Connection Diagram GE 202 Motor 4887 49/3 34 BA-T8-8139 Connection Diagram K-36-J Controller 4888 50/3 35 BA-T8-8146 GE K-36-JR Controllers, with line breaker (Connection diagram) 4889 50/6 36 BA-T8-8150 Commutator for Westinghouse 225N Motor 4846 51/1 37 BA-T8-8151A Armature Bearing Lining, Commutator End, Type GE 201G Motor 4813 51/2 38 BA-T8-8152 Armature Winding Diagram Westinghouse 225 Motor 4840.2 51/40 39 BA-T8-8154A Armature Bearing Lining, Pinion End, Type GE201G Motor 4890 51/6 40 BA-T8-8156 Armature Bearing Lining, Pinion End, Type GE202A Motor 4891 52/1 41 BA-T8-8157A Armature Bearing Lining, Commutator End, Type GE202A Motor 4892 64/5 42A BA-T9-8392A Step Hangers, Single and Double Bogie Trucks, Hinged Type 4785.2 64/6B 42B BA-T9-8392/1A Step Hangers, Single and Maximum Traction Trucks, Fixed Type 4812.2 43/1 43 BA-T8-8106B GE K36J Controller, Main Cylinder Segments 4893 50/2 44 BA-T8-8145A GE B23E Controller, Main Cylinder Segments 4816 65/2 45 BA-T9-8394B Door Lock for Motorman’ Cabin Maximum Traction Trucks. 4810 73/3 46 BA-T13-8757 Ballarat Electric Tramways Signalling System, Arrangements & Details of Box.On front cover of folder, "1 - 46"trams, tramways, drawings, ballarat, sec, depot, workshops

Black and white photograph of 2 trams in Swanston St c1925. Building in background may be the Queen Victoria hospital which places the trams just north of Lonsdale St. Photo has imperfection in top left corner of the image. First tram No. 171 is an S class single-truck California combination tram built by MMTB at Coburg Depot. It entered service in June 1922 and was withdrawn from service and sold in 1953. The tram's destination is shown as "Coburg Cemetery". Several passengers are seen boarding the tram. See page 64 of Destination City 5th Edition for another photo of this tram at South Melbourne Depot. The second tram, 178, is a T class single-truck combination tram with a long saloon, built by Duncan & Fraser, Adelaide for the MBCTT. It entered service in June 1917 as tram number 14C before transfer to the MMTB as T class tram. It was withdrawn from service and sold in 1961. This tram was one of only 6 Melbourne trams fitted with long wheelbase Brill Radiax truck. See page 65 of Destination City 5th Edition for another photo of this tram at Point Ormond terminus.trams, tramways, s class, t class, swanston st, mbctt, tram 171, tram 178, mmtb

Specification document comprising printed cover, eight typewritten pages (black carbon copy) and two photo pages of a J.G. Brill Co. of Philadelphia PA, Birney Safety Car. Specification No. 100, revised 1/10/1919. On the printed cover, which has three holes for a clip on the left hand side, printed with the Birney Safety Car trade mark, the names of the J. G. Brill associated companies (American Car Company of St. Louis, G. C. Kuhlman Car Co. of Cleveland Ohio, and Wason Manufacturing Company of Springfield, Massachusetts). On the inside of the front cover and on the outer back cover is the Brill logo. On the inside of the back cover is a floor / seating plan of the Birney Safety Car, giving overall dimensions, location of equipment etc. Item secured with one brass clip in the top left hand corner. The eight typed pages details the specification of the construction of the tramcar, equipment details etc for a single truck, double end Birney Safety (tram) car. Gives dimensions of the tramcar, materials, construction methods, finishes, equipment, glass, etc. Also details additional items that could be ordered with the tramcar. First photo shows the Birney car without a trolley pole, lettered for the KC Rys. Co. The second photo shows an interior view of the tramcar. Scanned for COTMA Website - pdf version.trams, tramways, birney, j. c. brill co., tramcar specifications, tramcar construction

Photos show Geelong 40 being loaded for transport to Geelong 40 on 27-3-1956. The tram became Ballarat No. 43 1 - tram lifted on four jacks with a single trucker behind 2 - Liftng a Brill 22E bogie onto the truck gooseneck. 3 - Tram lifted prior to backing the truck under it. 4 - Tram body lowered onto the truck. 5 - Ready for departure - note the destination of Belmont. See Item 6734 for other photographs.Yields information about the transport of Geelong 40 to Ballarat.Set of 5 black and white photographs of Geelong 40 being lifted and readied for Transport to Ballarat.tramways, trams, sec tramways, geelong, geelong depot, tram 40, tram 43

Set of four colour prints of an Ex Victorian Railways bogie tram body at Sloan NSW. Photo by Norm Cross, printed on AGFA paper. Photo dated 1/1/1994. Advised by Tony Smith - 29/3/2017 "The tram in question is VR 39. It was one of the last 4 trams disposed of from Elwood depot in 1959 after the system closed. They were purchased complete by Upton's machinery dealers of Corowa. The other cars were 29, 33 & 37. He then stripped them and sold the bodies. When we obtained VR 41 in 1977 we immediately went searching for other bodies that might yield parts to help in rebuilding 41. We located 37 on the outskirts of Wangaratta and it yielded many body items including a complete drivers bulkhead that was used to replace the one in VR 41 that had been cut out with an axle by the previous owner. You may also recall that we obtained 3 complete broad gauge 77e trucks from Upton's (they had cut up the other 5 bogies years previous). These 77E trucks are now under the Christchurch Brill tram with the 3rd as a spare as we were able to obtain standard gauge 77e's when we acquired L 105 for dismantling."Each photo has written in ink on the rear "Body of VR tram # @ Sloan NSW 1 Jan 1994, photo by Norm Cross".trams, tramways, vr trams, sale of trams, scrapped trams, tram 39

Black and white photograph of Freight Car 206 at Preston Workshops. This tram began as one of 10 single truck saloon trams built by J.G. Brill & Co., USA and assembled by Duncan and Fraser, Adelaide. It entered service for the NMETL as tram number 5 on 13/10/1906. It was transferred to MMTB and renumbered as U class tram 206 on 1/8/1922. It was withdrawn from service in 1938 and was converted to a freight car. In November 1947 it was withdrawn from service as a spare freight car after a bad accident and remained in storage until March 1950 when it was scrapped.trams, tramways, freight tram, preston workshops, nmetl, tram 206

Black and white negative, by Wal Jack, of Freight car No. 17 in Cameron St, Brunswick. Has the Coburg rail line in the background. Shows the 21E truck. Dated 8/1940. May not be a Wal Jack photograph as odd negative size. See also Reg item 5333 for another photo of this car at Brunswick.trams, tramways, freight tram, brunswick, cameron st, brill 21e, tram 17

Photograph of a ballast trailer at Preston Workshops. See page 82 of Destination City 5th Edition for details of the trailers. The wheelset or truck is a Brill 74T type. Would appear that there are some concrete weights loaded onto the vehicle. Yields information about the MMTB ballast trailers or wagons.Black and white photograph on Ilford papertramways, brill 74t, ballast wagons

Tram originally built for The North Melbourne Electric Tramways and Lighting Co. (NMETL) in 1906 as a straight sill open cross bench tram. Photograph is of the tram body on an un-motored truck or wheel set and has been posed for an official MMTB photograph in 1925, soon after the workshops were completed. It shows the destination of "M River" for Maribyrnong River.Shows the only type of fully open cross bench tram operated by the MMTB. This style was popular as a summer tram in North America. Originally built by Brill (USA) in 1906 and assembled by Duncan and Fraser for the NMETL as Tram No. 14. Taken over by the MMTB in 1922 and given the number 215.Black and White photograph of V class 215 at Preston Workshops 1925.In ink on rear "V class"trams, tramways, v class, preston workshops, tram 215, nmetl, brill, mmtb, uniforms

Photo shows Victorian Railways tramcar No. 37 at Elwood depot. Bogies or trucks are of the Brill 77E type.Yields information about the Victorian Railways bogie trams.Photograph - Black and White - VR 37 at Elwoodtramways, trams, victorian railways, vr trams, elwood depot, brill 77e, tram 37

Photo shows Victorian Railways tramcar No. 42 and 33 at Elwood depot. Bogies or trucks are of the Brill 77E type. Note the oil lamp on the driver's dash panel - all VR trams carried them.Yields information about the Victorian Railways bogie trams.Photograph - Black and White - VR 42 and 33 at Elwoodtramways, trams, victorian railways, vr trams, elwood depot, brill 77e, tram 42, tram 33

Photo shows Brill 22E Maximum Traction bogie or truck - Geelong tramcar, has the SEC logo on the side of the tramcar in the view. One of a set of photos was taken between 15/2/1956 and 3/3/1956 when services operated only between Belmont and North before the final closure of the Belmont route on 25/31956 and that bogie tram 31 is not shown on the board, having gone to Ballarat on 15/2/1956 - see item 5554. See item 8213 for an article on the Geelong system by Keith Kings. Yields information about the Geelong bogie trams.Black and white Negative - 120 sizetramways, geelong, brill 22e, maximum traction, bogie trams