French 1831 Pattern Artillery Short Sword A French 1831 pattern brass handle dismounted artillery mans short sword, marked Talabotts Paris with black leather brass mounted scabbard. Blade, length 49cm, total length 64cm The French 1816-1831 sword was based on ancient sculptural depictions of the Roman gladius, the standard sword of the Roman legionaries. Both sword and scabbard are in very good condition.Short Sword Brass Handle with 26 cm Blade French 1831 Pattern Artillery. Based on ancient sculptural depictions of the Roman gladius, the standard sword of the Roman legionaries.Stamped number on center of the guard of the hilt is 770. There is some marks also on center of the guard on the opposite side but not readable.french short sword 1831, brass handle, metal blade

Metal pointed blade with a Brass handle

Box of keys - various - see attached list. 1 brass cashbox handle, a Lockwood brass & steel padlock, a small 'ECV300' padlock.see attached.mining, relics, mccoll rankin & stanistreet

The Portland Water Board was constituted on July 1 1984 under the Water and Sewerage Authorities (Restructuring ) Act 1983 and amalgamated the prebvious authorities of Portland Sewerage Authority and the Portland Waterworks Trust. The Portland Water Board was abolished on 1 July 1994 under the Water Act 1989 and amalgamated with Port Fairy Water Board and Heywood Water Board to form Portland Coast Regional Water AuthorityA cast iron seal press. This was used by Portland Water Board to emboss agreements and official documents. Die is still attached to the press. It reads: Portland Water Board 1984 Cast iron press with handle and inscripted brass diePortland Water Board 1984 Remnant of label: .. eszler 103 Hawke Street West Melbournepublic administration, amalgamation, restructure, portland, port fairy, heywood, water supply, sewerage

Army leather gun case with strap, buckle and leather carry handle. 2 brass loops for carry strapH.J.Stone

An ink stand was a basic household item in the homes of the more affluent people in past generations before the more common use of the fountain pen and the biro (late 1940s). The ink stand in a home would have been used mainly for letter writing. It was also a basic item in business houses in the same time frame. There is no provenance for this particular item but it is of interest as a household object of the past and is useful for display. Wooden base with indentations for two ink bottles and pens and white metal handles (000633.1). Two ink bottles made of cut glass with white metal necks and hinged glass tops (000633.2 and .3). One ink pen with bone handle, brass top and rusty nib (000633.4).Pen marked 229.2 (old cataloguing number) Base has name in handwriting ‘Mrs A.H. Davidson’ (the donor) communication, ink set, writing set, warrnambool

Metal suspension scales. Very rusted. 00222.1 : Metal arm - brass 00222.2 : Forked handle - brass. 00222.3 : Larger dish - of unknown material, has a broken piece 00222.4 : Smaller dish - 0f unknown material 00222.5 : Steel fulcrum rod - Possibly manufactured by Aldo Gios.weighing scales, goldfields, chinese, buckland valley

Belonged to Colonel Otter.Metal cash box with lid, and three compartments in a lift-out interior tray. Two compartments have lids with metal rings.On lid: "COLONEL OTTER" in gold lettering. On lock at top & on brass handle: "Milners Liverpool"boxes, strongboxes

Mortice chisel with wooden handle. Handle has brass ring around bottom and a metal furrel 335mmL Blade 12mmW.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, mortice chisel, chisel

Chisel with 'Ward Cast Steel' stamped on blade. Has wooden handle with brass ferrule on end 370mmL x 20mmWflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, chisel, ward cast steel

Anieura. Four-masted wooden schooner, 1328 tons. Built California, 1918 as the Oronite. Reg. Melbourne, 1928. Lbd 236.5 x 42 x 29. Last captain, de Carteret. Stripped of anything of value at the Yarra Street Pier, Geelong, in 1932; burnt to recover her copper and brass, and sunk off Avalon Bach, two kilometres east of Point Lillias. She had been seized for debt. @ Her wreckage is scattered and overgrown, covered in light silt in 4 metres. [NWR],[LC],[NSC]A relic from the broken up Barque 'Anieura' in 1932/33: BARQUE ANIEURA. Left to Sink in Mud. GEELONG Monday -The hulk of the barque Anieura, which has been idle in Corio Bay for more than four years, was towed to a spot near Bird Rock on the northern shores of the outer harbour on Monday. The Anieura was built for the timber trade and made a journey to Australia. The owners then decided that the vessel was unsuitable for this trade, and she was sold to an Australian firm. The ship was placed in Corio Bay, and remained at anchorage for about three years before an effort was made to sell her. This being unsuccessful most of the fittings, were disposed of, and the hulk was taken to Fletcher's pier to be out of the way of shipping. The Victorian Salvage Co's offer to the Geelong Harbor Trust to dispose of the hulk was accepted. The 300 tons of road metal ballast was removed, and a quantity of timber taken out. The vessel was towed through the channel this morning and run aground near Bird Rock just outside of the north-east extremity of the bar where it is away from shipping. More timbers will be stripped from the vessel, and it is likely that she will be allowed to sink into the mud. The Argus Tuesday 4 April 1933. A wooden bunk from the 'Anieura', drawers underneath with brass handlesanieura, bunk, port phillip

Nail remover with rounded handle and brass ferrule. Arm and metal claw corroded. Wooden handle has grooved turns in handle.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

The bell was used for Trade Week to signify "time's up" at Optus Oval. Prior to this it was used to let Alan Espie's children on their Wandin property to come home.Why Al chimes in for Carlton Tony De Bolfo, Carlton Media Feb 20, 2014 11:05AM Alan Espie with the famous bell. (Photo: Carlton Football Club) Alan Espie with the famous bell. (Photo: Carlton Football Club) Related Etched into the rim of the bell Alan Espie has rung at every trade week gathering since 1994 is a touching quote attributed to his grandson. Dear Pa, May you always ring true blue, Love Harry Just thinking about that inscription often brings big Al to tears. The story of the Espie bell has its origins at the old family property at Wandin in the picturesque Yarra Valley, in the days when the Espies’ kids were at the neighboring creek fossicking for local platypus. “If they got too far away we’d ring an old cowbell,” Espie recalled, “and years later, my daughter Jo brought me this replacement bell from some second-hand naval place”. “Not long after Shane (O’Sullivan) asked me to officiate at trade week and that’s when the bell came into vogue.” A permanent fixture at trade week, Espie would ring the bell to signal the opening of trading when club recruiters gathered – initially within the confines of the Carlton Heroes Stand at Visy Park, more recently at Etihad Stadium. In those early days at Carlton he caused a stir as bell ringer, drawing curious responses from officiating journalists, recruiters and coaches alike. “I even remember (Kevin) Sheedy asking me if I was selling muffins,” he recalled. Then, when trade day was relocated to Etihad, Espie’s daughter thought it appropriate to get the bell inscribed. “Because the bell was leaving Carlton, Jo got it inscribed on my grandson’s behalf, because he was only four or five then. When I saw what was inscribed I was tearful,” Espie said. “The bell is very important to me, particularly at this time, because Jo is battling health problems at the moment, my grandson is autistic and she’s fought like hell to get him through.” Espie joined Carlton’s Under 19 committee on the eve of the senior Premiership season of 1979 and managed the club’s junior squads, the Bert Deacon Squad included. “I worked very closely with Geoff Southby, ‘Swan’ McKay and Trevor Keogh when they were coaching the Under 19s and I was recruiting as well,” he said. “In 1981 and ’82 I forward scouted for ‘Parko’ (David Parkin) and later on I did the same for ‘Wallsy’ (Robert Walls). After that I coordinated recruiting in central Victoria and it was nothing for me to do 25,000ks a year in my own car – and I loved every minute of it.” Espie’s passion for Carlton and empathy for its wartime players Bert Deacon, Ollie Grieve and Jack “Chooka” Howell can be sourced to his childhood years. His grandparents lived not far from the old ground on Wilson Street “and that’s how I got in for the ’45 Grand Final”. “My uncle, who had just got back from the war, grabbed a ladder from Wilson Street and set it up against the barbed wire fence at the ground. I climbed the ladder and caught my arm on the barbed wire, but I got over the top and saw the game while I straddled the fence,” Espie said. “What I saw was what you would today call ‘spotfires’ and I reckon it took football 20 years to get rid of it.” Today, Espie continues to ring in the yearly trade talk days at AFL headquarters (with the notable exception of 2012 when he was hospitalized), but he’s in no doubt as to where the bell belongs. “This bell has had nothing to do with Wandin but everything to do with Carlton - and with the 150th year of the club I think the bell stays here (at Visy Park). I still hope to ring the bell for the AFL this year, but at least I’ll know where it is,” Espie said. “I’ve told Jo about this and she tells me Harry’s rapt, because he’s a big Carlton supporter and he’s so happy his name is on the bell.”Wooden handle attached to a brass bell."Dear Pa, may you always ring true blue, Love Harry"

"D" handle, used to close a kit bag. The eyelets on the bag are threaded along the straight edge. It was then able to be locked using a padlock through the small ring area.Brass - "D" handle for kit bag.passchendaele barracks trust, brass handle

The subject item was made by G. Pearson and Co Ltd. of the Hope Works, Sheffield England. This company was established in 1854. By 1914 the company was manufacturing many differing types of edge tools, joiners' tools, forks and garden tools. Their specialities were hay, manure and coke forks, punches, armourers' tools etc. In 1938 the Company was styled F. G. Pearson and Co (Sheffield) Ltd and they were still making plane and other sharp edged blades as late as 1957, but by the 1970s they had gone out of business.A significant company based in Sheffield England and making tools of all types and exporting same to various countries around the world. This particular item is a vintage joiners screwdriver possibly used by a local Warrnambool carpenter (J Rob).Screw driver wooden handle shaped blade & brass metal ferrule1902 Sheffield marked on blade, F Rob owner Marked on handlewarrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, joiners tools, screwdriver, carpenters tools, f g pearson sheffield

Bayonet, French, Lebel, cruciform 52 cm blade, brass handle66891, Lebelbayonet, lebel

Handmade by Italian Officer in Myrtleford POW Camp and given to Mr J. R. Shale.Handmade carving knife, brass handle, long, wide steel blade.mr j. r. shale, myrtleford pow camp, carving knives

Brass handle French bayonet dated 1868. Chromed metal scabbard.Inscription on back of blade in French. Bayonet number H37811 and scabbard A4774

Tubular brass handle outside a smaller brass tube. The smaller tube is joined by a screw to an iron fork with turned up ends. Two holes to thread a loop through.domestic items, food preparation

Collection: McColl, Rankin, Stanistreet. Cast iron hand press company seal for the Central Nell Gwynne Gold Mining Company, used to seal all official documents pertaining to the Central Nell Gwynne Gold Mining Company. Black enamelled body with gold floral decoration, lever with wooden handle & brass seal. Painted in white C.N.Gwy.commerce, office equipment, company seal

19th century German dress bayonet. 28 cm blade, brass handleCoat of arms on handlebayonet, dress, german

Brass handle, circular at one end. Two holes for attachment of missing part.brass, goldfields, buckland valley, handle, chinese

A wooden tennis racquet press with separaters. It has a brass handle and three brass wing nuts on tightening screws. It is heavy and solid and could hold 4 racquets. It is shaped like a tennis racquet frame. Could be mahogany.tennis racquet-press sport recreation