Showing 40 items
matching iron clads
-
Kew Historical Society Inc
Photograph - 'Glencara', 59 Sackville Street, 1988
The first documentary evidence of this house comes from Rate Books which record that in 1893 a Mrs Treadway was the owner of this building with an N.A.V. of £80. At that date the occupier of the house was Charles B. Kelly, a clerk, while by 1910 Kelly had become the owner of the property described in that year as a six-roomed stone, brick and wood house with stables and outbuildings.(Kew Conservation Study, 1988)Colour photographic positive of one of 'Glencara'. It is a single storeyed house clad in render and dominated by a verandah that wraps around the front and sides, following the line of the projecting polygonal bay window. The verandah has elegance, being supported on coupled candy-twist columns and decorated with cast iron, and it returns around to the side entrance. The slate roof is intact. (Kew Conservation Study, 1988)glencara -- sackville street -- kew (vic.) -
Kew Historical Society Inc
Photograph - 'Glencara', 59 Sackville Street, 1988
The first documentary evidence of this house comes from Rate Books which record that in 1893 a Mrs Treadway was the owner of this building with an N.A.V. of £80. At that date the occupier of the house was Charles B. Kelly, a clerk, while by 1910 Kelly had become the owner of the property described in that year as a six-roomed stone, brick and wood house with stables and outbuildings.(Kew Conservation Study, 1988)Colour photographic positive of one of 'Glencara'. It is a single storeyed house clad in render and dominated by a verandah that wraps around the front and sides, following the line of the projecting polygonal bay window. The verandah has elegance, being supported on coupled candy-twist columns and decorated with cast iron, and it returns around to the side entrance. The slate roof is intact. (Kew Conservation Study, 1988)glencara -- sackville street -- kew (vic.) -
Kew Historical Society Inc
Photograph - 'Glencara', 59 Sackville Street, 1988
The first documentary evidence of this house comes from Rate Books which record that in 1893 a Mrs Treadway was the owner of this building with an N.A.V. of £80. At that date the occupier of the house was Charles B. Kelly, a clerk, while by 1910 Kelly had become the owner of the property described in that year as a six-roomed stone, brick and wood house with stables and outbuildings.(Kew Conservation Study, 1988)Colour photographic positive of one of 'Glencara'. It is a single storeyed house clad in render and dominated by a verandah that wraps around the front and sides, following the line of the projecting polygonal bay window. The verandah has elegance, being supported on coupled candy-twist columns and decorated with cast iron, and it returns around to the side entrance. The slate roof is intact. (Kew Conservation Study, 1988)glencara -- sackville street -- kew (vic.) -
Lakes Entrance Historical Society
Photograph - Kalimna West Hall, 1999
Also another copy 10 x 15 of side view.Colour photograph of the Kalimna West Hall, situated on the Princes Highway, halfway between Lakes Entrance and Swan Reach, Victoria. A single storey weatherboard building with gabled corrugated iron roof with four ventilators. Small entry porch and side door. Hardiplank clad extension at rear. Kalimna West Lakes Entrance Victoriahalls, community facilities -
Lakes Entrance Historical Society
Photograph - Colquhoun Railway Siding, 1954
... at the Colquhoun railway siding. The railway shed is entirely clad.... The railway shed is entirely clad in corrugated iron, comprising ...Standing on gravel platform are Jan, Alva, Dave and Ian Colquhoun and pup '?ussie'.Black and white photograph of four people and one pup at the Colquhoun railway siding. The railway shed is entirely clad in corrugated iron, comprising as open fronted shelter with a smaller room attached, partly enclosed. Sign COLQUHOUN on front. East Gippsland Victoriatransport, historic site -
Lakes Entrance Historical Society
Photograph - Nungurner Jetty, 1999
... of the lake beside the Nungurner Jetty, Gippsland Lakes. Entirely clad... the Nungurner Jetty, Gippsland Lakes. Entirely clad in corrugated iron ...Constructed 1940 by Kleinitz family using local and recycled materials.Colour photograph of a rustic building situated on the bank of the lake beside the Nungurner Jetty, Gippsland Lakes. Entirely clad in corrugated iron, black painted walls and red painted gable roof, double door facing lake. Nungurner Victoriawaterways, jetties, buildings -
Lakes Entrance Historical Society
Photograph - Historic House, 2000
Possibly relocated from another site (local information). Home of Berlingeri family since 1960's.Colour photograph of a dwelling at 8 Roadknight Street, with corrugated iron hipped roof. Timber walls, original veranda on front and side have been enclosed. Outer walls covered with cladding. Lakes Entrance Victoriahouses, heritage study -
Lakes Entrance Historical Society
Photograph - Historic House, Davies, Judy, 2000
House provided by the community for Miss Hammarstrom and family after Mr Hammerstrom, a fisherman, was lost at sea in 1926. The Age newspaper collected 400 pounds in an appeal to support the family. House was originally timber clad. Also one other colour photograph similar, side of building, fibro cladding and two brick chimneys.Colour photograph of a small fibro cement cottage. Corrugated iron gable roof, two substantial brick chimneys, at 43 Roadknight Street, Lakes Entrance Victoria houses, accommodation, heritage study -
Flagstaff Hill Maritime Museum and Village
Equipment - Boiler, T & F Johnson, boilermakers, late 19th century
A steam boiler like this late 18th century boiler, is often called a colonial boiler. Steam boilers were used in factories throughout Australia, mounted over similar designs of brick furnaces. This heat from the fire travels through the tubes in this fire tube boiler and the water heats as it circulates around them. Another kind of boiler is a water tube boiler, in which the water is inside the tubes and the heat of the combustion surrounds the tubes. The boiler in our collection burned wood as fuel but others of this design could also burn coal, coke, gas and liquid fuels. The boiler was made by T & F Johnson, boilermakers. In 1922 their factory was located at Coventry Street, South Melbourne. They were still advertising their 'Colonial, multi, vertical boilers, all sizes' at the same address in 1934. The connected pressure gauge, made in London by Dewrance, measures 0 to 400 pounds per square inch. John Dewrance is renowned as a pioneer of the steam locomotive in the early 19th century. He founded John Dewrance & Co. in South London in 1844. His son Sir John Dewrance took over in 1879. In 1939 the company became a subsidiary of Babcock & Wilcox, and was eventually owned by Emerson. How the boiler works: - A boiler is about two-thirds filled with water and heat is applied, in this case in the form of burning wood. The heat is transferred through the metal of the boiler to the water. When the water boils the steam rises to the top, and as it escapes from the boiler the steam pressure builds up in the steam space to later be released to do work; drive machinery such as ship and train engines, turbines, presses, wheels, and driving belts to operate looms and saws. The heat associated with the boiler can be used for preserving food, sterilising, factory manufacturing processes, and steaming wood for shipbuilding. Every boiler has several components fitted for safe operation: - - Safety valves - Gauge glass - Pressure gauge - Main steam stop valve - Water check valve - Blowdown valve - Manhole doorThe boiler is a significant item that gives us a snapshot of early Melbourne's industrial history. It is an example of the technological advancement during the Industrial Revolution where steam-driven machinery and motors could perform tasks more efficiently than manual labour. The makers were one of many boilermaker businesses in Melbourne during the early late-19th andearly 20th centuries. The maritime trade and skills of boilermaking are still learned and applied today. The Dewrance steam pressure gauge connected to the boiler was made by the London firms foundered by John Dewrance. He was renowned for developing the steam locomotive in the early 19th century.Boiler; a horizontal cylindrical underfired steam boiler. It is a multi-tubular design and is timber plank-clad, with brass fittings and pressure gauges. The boiler has an iron door at one end with a metal chimney above it. It is installed over a brick-enclosed solid fuel furnace. Two large, wood-mounted pressure gauges are connected to the boiler and have inscriptions. An inscription is on a red, cast iron plaque above the boiler door. The boiler's maker is T & F Johnson, South Melbourne. One of the pressure gauges was made by Dewrance, London..Maker's plate: "T & F JOHNSON / BOILERMAKERS / SOUTH MELBOURNE" Pressure gauge: "POUNDS PRESSURE / PER [square] INCH / DEWRANCE LONDON"flagstaff hill, warrnambool, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, boiler, multi tube boiler, steam boiler, steam technology, underfired boiler, horizontal boiler, timber clad boiler, steam power, industrialisation, boilermakers, south melbourne, dewrance, john dewrance, pressure gauge, dewrance pressure gauge, t & f johnson, london, steam engine, steam locomotive, pounds per square inch, 19th century, steam machine, johnson tyne foundry, colonial boiler, fire tube boiler -
Lakes Entrance Historical Society
Photograph - hut in Gippsland Victoria
In album titled A Bushmans CastleBlack and white photograph showing an elderly man in the doorway of a small dwelling clad in short lengths of hand sawn weatherboards, roof of corrugated iron, very large chimney top of chimney supported from collapse by long saplings. Believed to be in Gippsland Victoriamines and mining, waterways