Soft drink came in bottles owned by the manufacturer for re use and bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it.Historical: Change of bottles - shape, glass, stopper, embossing, use Aesthetic: Display showing embossing and shape.Clear glass lemonade bottle with straight sides four fifths of the way up then tapering sharply in to form a neck and then the opening. At top of sides there is large embossed writing around the circumference. There are 3 rows of embossed writing towards the base on one side and some on the base. A bakelite stopper is screwed in. This has a rectangular shape to assist a grip for turning.W. Woodroofe Ltd. Norwood S.A. at the top. This bottle is not sold / It remains the Property / Of W. Woodroofe Ltd. and opposite this an embossed pattern that looks like an ice-cream followed by the word Mark On the base: '2418'soft drink bottle

Cordial was bought at the local general store or at a grocery shop in a near-by city. Bottles belonged to the manufacturer and came in many shapes and sizes with a variety of lids.Historic: Size and shape of bottle The Kia-ora CompanySmall clear glass bottle with white screw-top tin lid. The bottle has straight sides half way up then tapers gradually to the opening. The lid has red writing on the top.On lid: Kia-ora Embossed around bottom of bottle: Kia-ora Not to be Refilled. On base:1/07 in centre. m on one side and 4 on the other, Under the centre: '1080'cordial bottle; kia-ora company

Cordial was bought at the local grocery shop or supermarket in the bigger towns/cities. Glass bottles were used for cordial concentrate before plastic became more popular and cheaper. These bottles came in many shapes and sizes.Small clear glass bottle with rectangular base, straight sides two thirds of the way up and then tapering gradually to the opening. It has a metal goldish coloured lid. The label on the back gives directions for making cordial. The label on the front is blue and white and torn with only about one quarter of it left.Embossed on base: 861 On the label, my guess would be: (concentr)ated / (Li)me/ (Le)mon / ...ar syrup cordial bottle

This butter mould/pat may have been manufactured post 1967(year post codes appeared in Australia) however the post code was only stamped on after it was machined. This type of butter mould was used by rural families to fashion home/farm made butter. This period was in most rural regions a time of self sufficiency where any domestic type implement which could be fashioned by the family would be crafted with skill. Shopping for goods required catalogues from stores located in major rural towns and cities and involved lengthy waiting times. Travelling to and from these specialised stores was not pleasant due to the relatively poor quality of the roads and the lengthy times taken. The small general stores in the Kiewa Valley could not cater for all the needs of the valley. The 1960's was a time when facilities especially goods and services started to improve drastically. The S.E.C. of Victoria with its Kiewa Hydro Electricity Scheme provided not only an improvement of facilities in the valley but also a increase in the population. This increase resulted in a greater demand for local produce. This item is one of many domestic food processing implements used by Kiewa Valley households in the mid 1900s, whether on the farm or in the small towns and hamlets. Self sufficiency was the key to survival during these early times. Where ever possible supplies from within the valley were preferred to that brought in by travelling salesmen or traders. This butter mould and butter pat was commonly used to fashion "home" made butter throughout the valley and in some cases supplied to "outside" regional towns. Although this method of production was phased out by better access to goods from nearby cities the revival of the good organic home grown produce in the 1980s saw a greater demand of this type of farm based produce.This well crafted circular wooden butter mould could also be used as a butter pat.The handle in the middle of the mould was not added after the crafting but has been fashioned from the initial block of wood when the bowl was crafted. The bowl structure has a rim around the edge.The top of the handle has an ink stamp "T. & W. Dav" on the top line and "Tawonga 3697" underneath.domestic food preparation, wooden butter pat, butter mould circular, dairy industry

This butter pat profiler may have been manufactured post 1967(year post codes appeared in Australia) however the post code was only stamped on after it was machined. This type of butter mould was used by rural families to fashion home/farm made butter. This period was in most rural regions a time of self sufficiency where any domestic type implement which could be fashioned by the family would be crafted with skill. Shopping for goods required catalogues from stores located in major rural towns and cities and involved lengthy waiting times. Travelling to and from these specialised stores was not pleasant due to the relatively poor quality of the roads and the lengthy times taken. The small general stores in the Kiewa Valley could not cater for all the needs of the valley. The 1960's was a time when facilities especially goods and services started to improve drastically. The S.E.C. of Victoria with its Kiewa Hydro Electricity Scheme provided not only an improvement of facilities in the valley but also a increase in the population. This increase resulted in a greater demand for local produce.This item is one of many domestic food processing implements used by Kiewa Valley households in the mid 1900s, whether on the farm or in the small towns and hamlets. Self sufficiency was the key to survival during these early times. Where ever possible supplies from within the valley were preferred to that brought in by travelling salesmen or traders. This butter mould and butter pat was commonly used to fashion "home" made butter throughout the valley and in some cases supplied to "outside" regional towns. Although this method of production was phased out by better access to goods from nearby cities the revival of the good organic home grown produce in the 1980s saw a greater demand of this type of farm based produce.This butter Pat/Profiler has on its base two patterns. On each end it has horizontal grooves cut into the wood which produce distinct lines onto the surface of the butter. between these grooves there is a section of two double lines crossing in the middle and separated by eleven horizontal lines The base has an elongated rectangular shape. The upper body has been sanded into a smooth convex shaped form where a wooden circular hand grip has been fashioned.On the top of the hand grip is stamped in black print"T. & W. Davies" and under this"TAWONGA 3697"domestic food preparation, wooden butter pat, butter mould circular, dairy industry

This butter pat profiler may have been manufactured post 1967 (year post codes appeared in Australia) however the post code was only stamped on after it was machined. This type of butter mould was used by rural families to fashion home/farm made butter. This period was in most rural regions a time of self sufficiency where any domestic type implement which could be fashioned by the family would be crafted with skill. Shopping for goods required catalogues from stores located in major rural towns and cities and involved lengthy waiting times. Travelling to and from these specialised stores was not pleasant due to the relatively poor quality of the roads and the lengthy times taken. The small general stores in the Kiewa Valley could not cater for all the needs of the valley. The 1960's was a time when facilities especially goods and services started to improve drastically. The S.E.C. of Victoria with its Kiewa Hydro Electricity Scheme provided not only an improvement of facilities in the valley but also a increase in the population. This increase resulted in a greater demand for local produce.This item is one of many domestic food processing implements used by Kiewa Valley households in the mid 1900s, whether on the farm or in the small towns and hamlets. Self sufficiency was the key to survival during these early times. Where ever possible supplies from within the valley were preferred to that brought in by travelling salesmen or traders. This butter mould and butter pat was commonly used to fashion "home" made butter throughout the valley and in some cases supplied to "outside" regional towns. Although this method of production was phased out by better access to goods from nearby cities the revival of the good organic home grown produce in the 1980s saw a greater demand of this type of farm based produce.This butter pat is one of two,see KVHS 0071 (B). It has been crafted from wood. One side has grooves running from the handle to the square shaped bottom. These grooves would stop the wet butter from clinging to the pat. The top side of the pat has been bevelled on both sides and the bottom edge. The hand grip is flat and curved to allow for a comfortable hold.domestic food preparation, wooden butter pat, butter mould circular, dairy industry, butter

This butter pat profiler may have been manufactured post 1967(year post codes appeared in Australia) however the post code was only stamped on after it was machined. This type of butter mould was used by rural families to fashion home/farm made butter. This period was in most rural regions a time of self sufficiency where any domestic type implement which could be fashioned by the family would be crafted with skill. Shopping for goods required catalogues from stores located in major rural towns and cities and involved lengthy waiting times. Travelling to and from these specialised stores was not pleasant due to the relatively poor quality of the roads and the lengthy times taken. The small general stores in the Kiewa Valley could not cater for all the needs of the valley. The 1960's was a time when facilities especially goods and services started to improve drastically. The S.E.C. of Victoria with its Kiewa Hydro Electricity Scheme provided not only an improvement of facilities in the valley but also a increase in the population. This increase resulted in a greater demand for local produce.This item is one of many domestic food processing implements used by Kiewa Valley households in the mid 1900s, whether on the farm or in the small towns and hamlets. Self sufficiency was the key to survival during these early times. Where ever possible supplies from within the valley were preferred to that brought in by travelling salesmen or traders. This butter mould and butter pat was commonly used to fashion "home" made butter throughout the valley and in some cases supplied to "outside" regional towns. Although this method of production was phased out by better access to goods from nearby cities the revival of the good organic home grown produce in the 1980s saw a greater demand of this type of farm based produce.This butter pat is one of two,see KVHS 0071 (A). It has been crafted from wood. One side has grooves running from the handle to the square shaped bottom. These grooves would stop the wet butter from clinging to the pat. The top side of the pat has been bevelled on both sides and the bottom edge. The hand grip is flat and curved to allow for a comfortable hold.domestic food preparation, wooden butter pat, butter mould circular, dairy industry

This "sewing and darning" box was purchased before 1952 (the date that the Clark Brothers merged with J&P Coats). It was in an era where the production and alteration/modification to any household or personal clothing was carried out by a family member/s. This was at the period where self sufficiency in rural and especially remote areas was a requirement and not just a hobby. Clothing modifications and "hand me downs" was a way of life. The long and tiresome journey from home to millinery shops was a great force to ensure that home sewing was carried out in the majority of residential and farm areas.This sewing box was donated by a pioneer family in the Kiewa Valley. Its significance points to an era before the establishment of the Kiewa Hydro Electricity Scheme and the establishment of the Mount Beauty Township. It was a time when the rural industries of the Kiewa Valley was rich in production of beef, dairy products, tobacco leaf and before the mass of alpine adventurers that tourism sparked. It was a time rural enterprises out shone tourism.This wooden sewing box is covered with decorative paper. The lid is fastened to the bottom section with two small hinges each having four screws. Each side is fixed to the other by a mortise groove. At the front of the box is a small clasp for complete closure. The box contains needles, darrning thread, thimble, a glass vial with metal screwtop and a red plastic cylindrical container with a thimble screw on top(contains a small reel with three different cotton thread compartments).On outside lid "FROM A FRIEND. I DO NOT WISH THEE GRANDEUR, NOR YET A STORE OF WEALTH, I WISH THEE RICHER TREASURE, CONTENTMENT, PEACE & HEALTH", On inside lid "USE CLARK & CO ANCHOR COTTONS FOR HAND & MACHINE SEWING ANCHOR MILLS, PAISLEY" Each of the different sewing boxes from the Clark Bros. has a label with different "friend" passages.sewing box, hand stitching, domestic clothes alterations, haberdashery

Soft drink came in bottles bought at the local grocery store or at a larger city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Bottles were re cycled remaining the property of the manufacturer. The history of Zedmanfg Company, Albury. Historical: Change of bottles - shape, glass, stopper, embossing, use. Aesthetic: Display showing embossing & shape especially if in good condition. Clear glass bottle. Bottom half has straight sides. Upper half tapers to the top where a metal crimp fits over the lip. Manufacturer's name is heavily embossed in cursive script diagonally across the lower half. The place 'Albury' is embossed below the diagonal script, in capital letters.There is heavy embossing at the base and at the bottom of the sides. All in capital letters. It has a crown seal - AGMZedManfg Co. Albury - across the bottom half of the bottle. At the base on the sides around the circumference 'This bottle is the property of the Zedmanfg Co. Albury. On the Base: F1486, GM inside A, M 113 glass, bottle, domestic, household, albury, zedmanfg co., drinks, lemonade

Soft drink came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Bottles were re-cycled remaining the property of the manufacturer. History of Cohn Bros., Bendigo & Swan Hill.Historical: Change of bottles - shape, glass, stopper, embossing, use. Aesthetic: Display showing embossing & shape especially if in good condition.Clear glass bottle. Bottom half has straight sides. The top half tapers to the top where a metal crimp fits over the lip. Manufacturer's name is embossed in print in block letters with its logo just above halfway from the bottom. At the base on the sides is embossing in capital letters around the circumference. The base is embossed with the crown seal of AGM.On 1 side half way up is embossed - Cohn / circle with CB inside around top of circle is Bendigo and around bottom of the circle is Swan Hill / Bros.is on the other side of the circle. - On the other side is embossed - The property of the Cohn Bros. Vic. Bry. Co. Ltd. Bendigo & Swan Hill. At the base - F1449 AGM (crown seal) M 2glass, bottle, domestic, household, drinks, lemonade, cohn bros., swan hill, bendigo

Soft drink came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Bottles were re cycled remaining the property of the manufacturer. History of ECKS Ltd..Historical: Change of bottles - shape, glass, stopper, embossing, use. Aesthetic - Display showing embossing & shape especially if in good condition.Clear glass bottle with graphite stopper. Straight sides. Top third tapers sharply into a neck. One third from the top it is heavily embossed with the letters ECKS. It is heavily embossed, in capital letters, around the bottom of the sides and lightly embossed on the base and near the opening.Below the opening is embossed '28'. Side: 'ECKS'. Bottom of sides around circumference: 'The property of ECKS limited Melbourne and its use by others is illegal.' Base: 22bottle, lemonade, soft drink, ecks

Soft drink came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Bottles were re cycled remaining the property of the manufacturer. History of R.J. Hadden's company in Benalla.Historical: Change of bottles - shape, glass, stopper. embossing, use. Aesthetic: Display showing embossing & shape especially if in good condition.Clear glass bottle heavily embossed. It was used for lemonade. It has straight sides that taper towards the opening two thirds of the way up. On 1 side the company's logo forms a circle with the word 'lemonade' embossed horizontally inside the circle. On the other side, at the base, are 2 lines of embossing.R. J. HADDEN - moon shape across the top forming the top of a circle with BENALLA completing the circle below. LEMONADE is embossed horizontally inside this circle. On the other side of the bottle: 'This bottle is the property / of R.J.Hadden, Benalla.' Base: lemonade, benalla, bottle, drink, r.j.hadden, soft drink

Soft drink came in bottles bought at the local grocery store or at a large city store on a shopping expedition. the shape of the bottles changed as did the stopper used to seal it. Bottles were re cycled remaining the property of the manufacturer. History of Murray Brewery, BeechworthHistorical. Change of bottles - shape, glass, stopper, embossing, use. Aesthetic. Display showing the embossing & shape especially if in good condition.Clear glass bottle. Embossed print in capital letters, around half of the circumference, one third of the way down from the top between the 2 longitudinal joins. The bottom half has straight sides and the top half tapers to the top where a metal crimp fits over the lip. Around the circumference is embossed print in capital letters. The base also has embossing. Crown Seal.Around circumference one third from top: 'Murray B.' Around circumference at base: ' Propetery of Murray Breweries pty Ltd. Beechworth.' Base: F1767 Symbol: 'AGM' and '445' 'M O'beer, drinks, lemonade, beechworth brewery, murray breweries, bottles

Soft drink came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Bottles were re cycled remaining the property of the manufacturer. History of Marchants & Co. Ltd.Historical: Change of bottles - shape, glass, stopper, embossing, use. Aesthetic: Display showing embossing & shape especially if in good condition.Clear glass bottle with groove criss cross patterned sides near the base and three quarters of the way up where the bottle tapers to form straight sides half way to the opening. Between the criss cross patterns is white and red painted print and a 'ceramic label. The red plastic stopper is attached at the opening.On one side: Red and white "Serve Icy Cold / Marchants / It's the Most On the other side: A / Sparkling / Summer Drink / Bottled by Marchant & Co. Ltd / Melbourne. Please Return / stopper / with bottlemarchants, lemonade, soft drink, plastic screw, bottles, drinks

Beer came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions.The shape of the bottles changed. The bottles were re cycled remaining the property of the manufacturer who paid for them. History of the Richmond Brewery, Richmond.Historical: Change of bottles - shape, glass, embossing. Collected by bottle collectors. Aesthetic: Display showing embossing & shape especially if in good condition.Clear glass bottle used for beer. Bottom half has straight sides. The top half tapers to the opening where a metal crimp fits. It has a crown seal. The glass is joined on two sides longitudinally. It is heavily embossed, in capital letters, around the base of the side around its circumference and at the base.Bottom sides: 'The property of Richmond N.S. Brewing Co. Pty. Ltd.' Base: 'R.B.' and underneath these letters 'R.'. and in between and much smaller S.3.bottle, beer, richmond brewery, drink, richmond

Beer came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions. The shape of the bottles changed. Bottles were recycled remaining the property of the manufacturer who paid for their return. History of the Richmond Brewery.Historical: Change of bottles - shape, glass, embossing. Collected by bottle collectors. Aesthetic: Display showing embossing & shape especially if in good condition.Clear brown bottle with heavy embossing. The bottom half has straight sides. The top tapers to the opening. Half way up the sides it is heavily embossed with R.B. and underneath these letters R. The face of a tiger features in heavy embossing on the side of the bottle. At the bottom around the circumference and on the base is embossing. There is a broken cork sealing the bottle. Sides: R.B. and underneath this R. with a head of a tiger. Bottom around the circumference: 'The property of Richmond N.S. Brewing Co. Pty. Ltd.' Base: '650'beer, drink, bottle, richmond brewery, richmond

Beer came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions. The shape of bottles were recycled remaining the property of the manufacturer who paid for their return. History of Manufacturers Bottle Co. of VictoriaHistorical: Change of bottles - shape, glass, embossing. Collected by bottle collectors. Aesthetic: Display showing embossing & shape especially if in good condition.Clear brown glass beer bottle. Straight sides 190 mm from base. Sharp taper to neck which tapers for 90 mm to opening. At top of straight side is a heavily embossed spade (as in cards) shape with M.B. at top and C.V. beneath - both inside spade shape. Bottle made with 2 longitudinal halves. At the bottom near the base is heavily embossed print (in capital letters) around the circumference. At the base is embossed a horseshoe shape.Inside spade shape: M. B. above C. V.. Along the circumference at the bottom "The Property of Manufacturers Bottle Co. of Victoria Pty. Ltd.'. At the base; A horse shoe shape with a pointed curve.bottle, beer, munufacturers bottle co. of victoria, horse shoe shape on bottle, spade shape on bottle

Beer came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions. The shape of bottles were recycled remaining the property of the manufacturer who paid for their return.History of the company - Pick Ax, AdelaideHistorical: Change of bottles - shape, glass, embossing. Collected by bottle collectors. Aesthetic: Display showing embossing & shape especially if in good condition.Clear brown glass bottle used for Beer. Long straight sides before sharp taper to neck which has a slight bulb shape. Glass joined longitudinally on 2 opposite sides. Cork is stuck inside the bottle. Along the bottom of the sides there are 3 rows of heavily embossed print (capital letters), beginning with a circle. Embossed on base: 634. At bottom: circle (can't read). 3 lines: This is the Property of / ....Bottle Co-Operative / Company Limited South Walk.bottle, brown glass, beer, adelaide brewery, pick ax brewery

Beer came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions. The shape of bottles changed. Bottles were recycled remaining the property of the manufacturer who paid for their return. People collected bottles to return.Historical: Change of bottles - shape, glass, embossing. Collected by bottle collectors. Aesthetic; Display showing embossing & shape especially if in good condition.Clear glass bottle used for beer. Straight sides half way up and then tapered to the opening. 2 longitudinal joins on opposite sides in glass. Lightly embossed MB and underneath it CV in a spade (as in cards) shape two thirds of the way up. Embossed along the bottom and a horse shoe shape at the base.M.B. with C.V. underneath it on the side. Along the bottom: "This bottle always remains the property of / The Manufacturers Bottle Co. of Victoria Pty Ltd." Horse shoe shape on base.beer, bottle, m.b.c.v., manufacturers bottle company of victoria

Sauce came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Bottles were re cycled remaining the property of the manufacturer. History of H.M. Leggo & Co. Ltd. BendigoHistorical: Change of bottles - shape, glass, embossing, use Aesthetic; Display showing, embossing, size, shape.Medium size sauce bottle made with clear glass. The bottom half has 10 equal sides (or panels) going half way up. The sides become round and taper to the opening to a lip and screw top. Heavily embossed on 2 of the side panels with printing in capital letters vertically and the maker's name printed horizontally above the panels directly opposite. Embossed on the base.Manufacturer: 'Leggo" on side. Sides: "This Bottle is the Property / of H. M. Leggo & Co. Ltd Bendigo " Next panel: "Is Lent Only / Must Be Returned" Base: Common Seal - "A' with 'G' inside top half and 'M' inside lower half of A. Underneath this and across the middle is "M154' with 'M' below On the edge: '018'sauce, household, h.m. leggo & co. ltd. bendigo, glass bottle

Cream came in bottles bought at the local store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it - the cardboard one predating the aluminium seals. Liquids were measured in pints pre 1966.Historical: Change of bottles - shape, size, stopper, embossing Aesthetic: Display showing embossing, size and shape Clear glass cream bottle with straight edges half way up tapering to the top where there is a thick lip on the outside. Opening is wide. There is an inner rim inside the opening which held a cardboard disc which fitted on to seal it. Heavy embossing on the side and base printed in capital letters.On side near the base: "One Imperial Pint" On base: At top - Common seal A with G at top and M below in side the A. F1297 across middle and M underneath it.cream, dairy, bottle, household

Cream came in bottles bought at the local store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Liquids were measured in pints pre 1966.Historical: Change of bottles - shape, glass, stopper, size, embossing, use Aesthetic: Display showing embossing, size and shape especially if in good conditionClear glass bottle used for storing cream. Straight sides half way up then gently tapered into a wide opening which widens with a broad lip on top. Heavily embossed along the bottom on one side in printed capital letters and lightly embossed on base. Lip on inside to hold a cardboard disc that sealed the opening.Side: One Imperial Pint Base: G 499cream, dairy, milk bar, bottle, household

Cream came in bottles bought at the local store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Measurement of liquids was in pints pre 1966.Historical: Change of bottles - shape, size, glass, stopper, embossing and use. Aesthetic: Display showing embossing and shape.Clear glass bottle with straight sides tapering towards the opening from half way up. The opening is wide with a thick glass rim. There is an inner rim inside the opening to hold a cardboard disc to seal it. It is heavily embossed on one side near the base.Side: 'Imperial Half Pint'bottle, cream, dairy, milk bar, household

Cream came in bottles bought at the local store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. The amount of liquid was measured in ounces and pints pre 1966. History of J. Kikpatrick, Waverley, East malvern.Historical: Change of bottles - shape, size, stopper, embossing and use. Aesthetic; Display showing embossing and shapeClear small glass cream bottle with heavy embossing on both sides. Inside the opening is a rim to hold a cardboard disc used to seal the bottle. The sides are straight half way up then taper to the opening. One side: The Property of / J. Kilpatrick (half moon on top) / Waverly Road (across middle) / East Malvern (half moon on bottom) Other side: Please / wash / & / Return (also curved with & in the middle) Along side at base: "Contents not less than 8 ozs." Base: Across middle M93 above M, and AGM below. cream, dairy, milkbar, bottle, household

Cream came in bottles bought at the local store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Historical: Change of bottles - shape, size, stopper, embossing, use Aesthetic: Display showing embossing, size and shapeClear glass bottle with straight sides three quarters of the way up from the base. It tapers in a little to the opening. There is a lip on the rim.Base: 626dairy, bottle, milk bar, cream, household

Chutney and pickles came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The sale of the bottles changed as did the stopper used to seal it. This bottle may have been re used for homemade chutneys.Historical: Change of bottles - shape, embossing, stopper, use. Aesthetic: Display showing shape & size Clear glass bottle used for chutney or pickles sealed with a cap. Straight sides three quarters of the way up then tapering to the neck and then to the slightly wider opening. Embossed on the base.Base: 641 above F996 with M beneath it.preserves, pickles, chutney, bottle, household

Coffee essence was stored in glass bottles bought at the local grocery store or at a large city store on a shopping expedition. the shape of the bottles hanged as did the stopper used to seal it. History of 'Robur' manufacturers.Historical: Change of bottles - shape, glass, stopper, embossing, use Aesthetic: Display showing embossing and shapeClear brown glass bottle of unusual shape. The straight sides go up outwards from the sides of the base which has a rectangular shape. The opening 'sits' on the curved 'shoulders'. There is no neck. Embossed heavily at the bottom of the front and back. Possibly used for storing coffee essence.Front & Back: 'Robur' Base: 4 numbers at the edge too difficult to read.bottle, coffee essence, robur, household

Coffee / chicory and sauce were stored in bottles bought locally or at a large city store on a shopping expedition. The shape of the bottles changed as did he stopper used to seal it.Historical: Change of bottles - shape, glass, stopper, embossing, use Aesthetic: Display showing embossing and shape.Clear glass bottle used for storing coffee / chicory or sauce. The base is a square. The 4 sides are straight for two thirds of the way up then taper quickly to the neck and then the screw top opening. It is embossed on the base. The base is slightly indented.Base: Common seal: An 'A' with 'G' in the top half (of the A) and 'M' in the bottom half. Below this and across the middle '1129' and 'M' underneath. '807' is in one corner.bottle, coffee, chicory, sauce, household

Soft drink came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Bottles were re-cycled remaining the property of the manufacturer. History of Phibbs Bros., Albury.Historical: Change of bottles - shape, glass, stopper, embossing, use. Aesthetic: Display showing embossing, shape and size.Small clear glass bottle with heavy embossing. The straight sides go half way up then taper to the opening. The manufacturer's name is written diagonally across one side with 'Albury' printed in capital letters underneath. On the same side three lines of words are printed in capital letters. The base has light embossing.Side: 'Phibbs Bros / Albury' Side around the bottom: 'This Bottle / Is the Property of / Phibbs Bros Albury'bottle, ginger beer, soft drink, phibbs bros albury, drink, household

Wine was stored in bottles and bought at licensed premises either locally or in larger cities visited during shopping expeditions. The shape and colour of bottles varied. History of making glass and hand finishing.Historical: Change of bottles - shape, manufacture, glass Aesthetic: Display showing colour & shape.Dark green glass wine bottle with straight sides about half way up before tapering gradually to the neck and then the top. The base is indented. In the middle of the base there is a 'knob'. The bottle is hand finished. Marked with bubbles in the glass and random ridges.bottle, wine, hand finished bottle, dark green glass