Used on horse tackle during the 19th and 20th centuries and manufactured by Holden and Frost Sold by Holden and Frost c1900 for military and agricultural use.Nickel plated horse bit bradoon nickelequine, military, agricultural, civilian ca1910, horse bit

Awarded to Alan Bowers (A236814) who was a R.A.A.F. dental mechanic who serverd during WWII including service in Darwin, and then continued in the R.A.A.F. for some years after the end of WWII The Royal Australian Air Force (and all Commonwealth Air Forces) Long Service and Good Conduct Medal: Awarded to NCOs and ORs of the RAAF (RAF, RCAF etc) for 15 years service. A cupro-nickel plated medal, the obverse features the sovereign's head, the reverse features the crown and eagle emblem of the RAAF (and RAF). Officers are eligible for the award provided they have served a minimum 12 years in the ranks. The riband is dark blue and maroon with white edges. This medal ceased to be awarded in Australia in 1975 when it was replaced by the National Medal (and sbsequently the DFSM and DLSM) in the Australian system of honours and awards. http://www.heritagemedals.com.au/medals-1/service-long-service/air-force-long-service-and-good-conduct-medal.html History of the RAAF Dental Branch It took six years following the formation of the RAAF in 1921 for the first Dental Clinic to be established at Point Cook, Victoria. On 10th June 1927 Flying Officer James Carl Rosenbrock commenced work as an RAAF Dental Officer for the FlyingTraining School at Point Cook. As personnel numbers were still relatively small, Rosenbrock was also responsible for the dental care of all Victorian RAAF units, which involved treating members at 1AD Laverton, as well as Air Force Headquarters at Victoria Barracks in Melbourne. As Army Dental Officers were currently caring for RAAF personnel at Richmond, NSW, the Senior Dental Officer of the 3rd Military District in Victoria (SDO 3MD) requested through the military board that a similar arrangement be established, where that the newly appointed RAAF Dentist provide part time dental services to the Army units stationed at Queenscliff. This was seen as an effective reciprocal arrangement, with both units having a Dental Officer in attendance for, in total, around 3-4 weeks a year. Rosenbrock continued to serve as the sole RAAF Dental Officer until the middle of 1933, when the Air Board asked for his service to be terminated following ‘behaviour unbecoming of a RAAF officer'. He had borrowed several sums of money, of around 40 Pounds or so, from junior ranks on base (as well as from the Regimental Sergeant Major) and had failed to pay the money back. He was replaced by a fellow Victorian, FLGOFF Norman Henry Andrews, on the 18th Sep 1933, who went on to become our first Director of Dental Services, and was instrumental in establishing the organisations and conditions of the Branch that are still present today. Through a fair amount of persistence and hard work on the part of Norman Andrews, the RAAF Dental Branch began to expand from 1937, with the introduction of 2 additional positions, at RAAF station Richmond, and at the FlyingTraining School at Point Cook. This gave the RAAF 3 uniformed Dental Officers, which was expanded to 5 in the months leading up to WW2. 4 of these Dental Officers were based in Victoria and 1 at Richmond, with the other two RAAF units being cared for by the Army (as in the case of Pearce in WA) or by civilians (as in Darwin). With the sudden increase in RAAF personnel required at the outbreak of WW2, the number of RAAF Dental Officers increased dramatically, from 5 in 1939, 28 in 1940, 64 in 1941, 147 in 1942, 193 in 1943, 219 in 1944, and peaking at 227 in 1945. RAAF Dental Officers were required to work in a variety of locations, both in and out of Australia. Between 1940 and 1942 a massive construction programme occurred, with new dental clinics being established around Australia. Priority was given to aircrew training units in order to get these personnel dentally fit for operational deployment, but Dental Officers could equally find themselves posted to recruit depots, fixed stations, medical clearance stations, mobile dental sections, and RAAF and civilian hospitals. RAAF Dental Officers were posted to the large dental centres at Ascot Vale (Vic) and Bradfield Park (NSW) when first appointed, where they received military and clinical training, before being deployed to their needed location. Mobile Dental Units When Japan entered the war in 1941, the rapid deployment of troops to northern operational areas with less than ideal dental fitness was extremely high. As a result, the RAAF deployed a range of mobile dental units, either alone or with medical sections, to support the increasing number of isolated deployed personnel within Australia and overseas. There were three types of mobile unit used: a. Mobile Dental Unit – relied on using either a semi-trailer to get around or by building a surgery directly on to the truck chassis, and installing hydraulic chairs, units, x-rays, and laboratory equipment. They were able to move around between small units, such as RAAF radar stations, where they could plug into the local power supply and work immediately. b. Transportable Dental Units – used for stops of longer duration, where field equipment was carried in panniers from one unit to another by road or rail and housed in whatever accommodation was available at the destination. They were often carried within Australia on Tiger Moths and Dakota aircraft. c. Itinerant Dental Units – in some areas, the dental equipment was installed at the RAAF unit and the Dental Officer and their staff would travel from unit to unit, using the equipment available at each location. RAAF Dental BadgeAs the war developed in Europe, it soon became obvious that the RAF Dental support was not capable of supporting the increasing numbers of RAAF aircrew that were being sent for service with the RAF, with only enough Dental Officers available to provide one to every 2000 men ( instead of the preferred 1 to 600). As a result, the RAAF provided a mobile dental unit, fitted out in a caravan and pulled by a Ford V8 Coupe, to travel around England in support of RAAF personnel at various squadrons. Some degree of tact was needed to ensure that the RAF did not take this as a comment on the treatment they were providing, but it proved successful in maintaining a satisfactory state of dental fitness in RAAF personnel, and a second mobile unit was soon dispatched. They were also set up with a laboratory on board as well as the surgery, which was a major difference between the RAF and RAAF, as the RAF did not provide dentures for their troops (the RAAF would, providing they had served for 6 years). In 1943 the RAF was no longer able to provide Dental support to Australian troops in the Middle East, which resulted in the need for a transportable dental unit to be deployed from Australia. It functioned in a similar manner to the RAF, by moving from one squadron to another. It served in the Middle East and Africa, from Cairo across North Africa, to Italy, and eventually back to England to treat returned prisoners of war. GPCAPT Norman Andrews The growth and development of the RAAF Dental Branch owes a debt to one man in particular, GPCAPT Norman Andrews. As the second RAAF Dental Officer to enlist on 18 Sep 1933, Andrews became the principal architect of the structure and organisation of the RAAF Dental Branch leading up to and during WW2. Until early 1940, the RAAF Dental Branch was administered by the Director of Medical Services (Air), which placed it under the control of the Army Medical staff. The Army would provide their Inspector of Dental Services for advice whenever needed. In April 1940, the RAAF Medical service separated from the Army, resulting in the control of the RAAF Dental Branch shifting back to the RAAF. Andrews became the first Director of Dental Services, when the position was created in 1943 as recognition of the higher profile the Dental Branch was now playing in the RAAF Medical service. Until this time, Andrews's title had been as the Dental Staff Officer to the RAAF Medical Service. Andrews was responsible for the establishment of the war-time structure of the Dental service, establishing new dental centres at all major bases, creating mobile and transportable dental units, ensuring the continual growth of the Branch, maintaining professional development of staff through the establishment of a professional journal, and by organising renowned lecturers to speak at RAAF bases. He also believed in visiting as many dental units as possible to see for himself what conditions were like and to talk first-hand to staff in remote units. His itinerary during the war years, both in and out of Australia, shows a large number of trips in a variety of modes of transport in order to reach remote areas where units were serving. He was promoted to GPCAPT in July 1944, as the numbers of Dental Officers soon peaked at 227 towards the end of the war (1 GPCAPT, 9 WGCDRs, 60 SQNLDRs, and 157 FLTLTs). After the war, with the reduction in RAAF personnel required in uniform, the Dental Branch also reduced its numbers significantly. By 1947 there were only 18 Dental Officers serving (many part-time), with 1 GPCAPT, 1 WGCDR, 10 SQNLDRs, and 6 FLTLTs, and only 13 by 1950. With the decrease in Branch personnel numbers, the ‘powers to be' saw fit to reduce the Director of Dental Service rank to WGCDR, and as a result Norman Andrews found that in order to continue serving in the RAAF he would have to wear a reduced rank. This appears to have been a contributing factor in his decision to discharge at the relatively early age of 43 and accept an administrative job as Director of the Victorian Government's School Dental Service. Norman Andrews holds the proud honour of being the founder of the RAAF Dental Branch, which during the war was instrumental in educating servicemen of the importance of dental health and maintaining the dental fitness of troops in a variety of areas. Dental Orderlies (Assistants) The dental orderly mustering was first introduced in 1937. Until that time, medical orderlies were assigned to assist the Dental officer with their duties. As early as 1931 it had been noted by both RAAF and Army Dental Officers working in Victoria and Richmond that a lot of the troubles they were having would be solved by appointing a permanent Dental Orderly. Often they would find that the medical orderly they were assigned was a different one each day, and as a result the administration and work in general was very inefficient. By 1937, with the increase in Dental Officers to 3, it was realised that a Dental Orderly mustering needed to be created. Dental Mechanics/Technicians Before WW2, dental laboratory work was provided by civilian laboratories, as most RAAF units were stationed around metropolitan areas. At this time, service personnel were still required to pay for their own dentures, unless they had served for six years or had their dentures damaged during performance of their duties. In July 1940, mainly in response to the development of more remote RAAF dental units and the increasing demand for dental prostheses, the Dental Mechanic mustering was established. Unfortunately there was a very limited pool of civilian dental mechanics to recruit from, and as a result the RAAF set up a training school at Laverton (which was later moved to Ascot Vale) in June 1941 which conducted an intensive 6 month course in Dental mechanics. Dental mechanics were quickly in demand. In all fixed and mobile dental units at least 1 Mechanic was supplied for each Dental Officer, and indeed the RAAF supplied Dental Mechanics throughout all its deployments, something the RAF were unwilling, or unable, to do. Two grades of dental mechanic existed: the Senior Mechanic (with the rank of NCO), who was competent in all phases of laboratory work; and the Junior Mechanic, who could only handle routine work and not more advanced denture work. The progression to Senior required a further trade test in techniques including setting up, clasp-forming, casting and backing teeth. During the course of the War, two special courses were held for Mechanics. The first, directed at senior mechanics so that they could instruct others, was in 1942 when Acrylic Resin was first introduced as a denture base material, as an alternative to the current option of vulcanite. Later, towards the end of the War, a ‘refresher' course was provided for those that had served for the greatest period of time in order to allow them retraining in techniques that they had not practised during their service and which were common in civilian life. This included cast base dentures, crowns and bridges, partial dentures, and retainers. Towards the end of the War, a course was held with WAAAF trainees to train them as Mechanics. However, as the War was soon to end they never had the opportunity to progress within the mustering to become Senior Mechanics. The RAAF Dental Branch has survived 75 years of turbulence, with reviews of its viability occurring regularly every few years from as early as 1937. The Branch continues to provide excellent service to the ADF community and, despite reduced manpower, will continue to play an important role in Air Force Health operations. http://www.defence.gov.au/health/about/docs/RAAFDental.pdf40cm cupro-nickel plated medal, the obverse features the sovereign's head, the reverse features the crown and eagle emblem of the RAAF (and RAF). A23814 BOWERS.A. A. F.r.a.a.f long service medal, r.a.a.f good conduct, r.a.a.f. dental service medal

Shield presented in 1939 and awarded to winning house at the annual CPLC Inter-House Athletics competition; Awarded 1939 - 1950. A note in Touchstone December 1939 p.9 reads, 'House rivalry was greatly stimulated on Sports' Day by the gift of the Bevan John Shield. The shield is made of rosewood with silver plates attached, on which is to be inscribed the name of the winning house. Also, each year, an enamel band of the colour of the victorious house is to be placed round the silver plate. We are very grateful to Mr John for his generous and much appreciated gift. A second shield was established in 1951 (see VC000355)Rosewood shield with ornate silver title plates and 15 silver inscribed plates;Inscribed on large central plate: CLARENDON / PRESBYTERIAN / LADIES COLLEGE / INTER-HOUSE / ATHLETICS Inscribed on scroll plate at top of shield: THE BEVAN A JOHN SHIELD bevan-a-john, clarendon-presbyterian-ladies-college, inter-house-competitions, athletics

Melbourne Tramway & Omnibus Co. Bell Punch No. D406. A heavy nickel or chrome plated steel ticket or fare strip canceling / registering mechanism used on Melbourne cable trams. When a fare was sold, the bell would ring advising the passenger that their fare have registered. "An ingenious device resembling in principle the ticket punch of a railway porter. It is carried by the conductor who wears pinned to his coat a 'trip-slip'. He punches this once for every fare received; the action is simultaneously registered on a dial inside the punch and bell rings to appraise the passenger of the fact. The punch is provided with a patent lock, the secret of which is known only at headquarters and effective system of check is thus secured." (" A story of the Melbourne Cable Tramway System" - page 54). Used by the MT&O and MMTB until 1922/23 when replaced by the check ticket system. Manufactured by the Railway Register Manufacturing Company. Has "MT&O Co. ..." stamped on one side along with patent dates.Demonstrates the equipment used by the Melbourne Tramway & Omnibus Co. to register fares and provide an accounting method.Nickel or chrome plated steel ticket punch, used by the Melbourne Tramway and Omnibus Co. stamped "MT&OCo" and "D406", c1885.ticket punch, tramways, trams, bell punch, tickets, fares, cable trams, railway register manufacturing company

This Plate was commissioned by the RSL of Australia to9 commemorate the Diamond Jubilee of the ANZAC Troops Landing at Gallipoli on 25 April 1915.The item is an original, theIssue Number is 562A round plate, cream colour, a picture of Gallipoli Peninsula in the centre and smaller pictures round the ende of the plate. The flags of Australia and New Zealand at the top of the plate.on the front of the plate 1915 to 1990, Landing at Gallipoli on 25 April 1915. On the back of the plate - This limited edition collector's plate was commissioned by the Returned and Services League of Australia to commemorate the Diamond Jubilee of the ANZAC Troops landing at Gallipoli on the 25 April 1915. Signature of Brigadier A B Garland AM (RL) Issue Number 562 gallipoli, diamond jubilee plate

Box of very small pencils containing 8 pencils and one holder'The Nota Bene Pencils Nickel Plated with 12 Refills'domestic items, writing equipment

This electroplated silver teaspoon was made by the Sheffield Silver Plate & Cutlery Company Limited from about 1913 to early-1930s. It was recovered from an unknown shipwreck in the coastal waters of Victoria in the late 1960s to early 1970s. The shipwrecks in the area range from around the 1840s to the early-1930s. It is part of the John Chance Collection. Sheffield manufactures produced high quality silverware products. In the mid-1700s a cutler, Thomas Boulsover, invented a process to fuse copper between two sheets of silver, which could still be like solid silver then the edges were bound in silver. Items made this way are now referred to as Old Silver Plate. The modern method of electroplating has a much thinner layer of silver. The firm Sheffield Silver Plate and Cutlery Co. Ltd. was established in 1913 by Mappin & Webb to make spoons and forks using the American Wilzin process, which was a failure. In 1923 the company was incorporated then re-financed and reverted back to the older production method for electroplating. The maker’s stamp usually had the letters “S.S.P. & C. Co Ltd EPNS” and often included an octagon stamp with “SSP”. The firm had the registered trademarks of ‘SILCUTA’ and ‘SILTONA’ and has also used the name ‘Sheffield Nickel & Silver Plating Co. Ltd.’ The firm had manufacturing Works at Priestley Street, Sheffield from 1913 until the 1960s. They also had a London office in 1919 at Atlantic House, 40a Holborn Viaduct, London, E.C.1., then in 1921 at Union Bank Buildings, Charterhouse Street, E.C.1. The company was dissolved in 2000, the last office address being 23 Albemarle Street London, W1S 4AS. Although this spoon is not linked to a particular shipwreck, it is recognised as being historically significant as an example of cutlery, possibly from a passenger’s luggage or imported for use in Colonial Victoria in the 19th to early 20th century. The spoon is the only example in Flagstaff Hill’s collection that is connected to the manufacturer Sheffield Silver Plate and Cutlery Co. Ltd., historically significant also, as in 1939 the same manufacturer was a recognised supplier to the British Government. The spoon is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Spoon; teaspoon, nickel plated silver, discoloured to brown. Old English design. Inscription on handle. Made by Sheffield Silver Plate & Cutlery Co Ltd., Sheffield. Spoon has dimpled surface, nicks and dents. Embossed logo within sunken elongated octagon [SSP] Embossed letters following logo, “S S P C & CO LTD EP/NS” flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, sheffield, cutlery, eating utensils, electroplate, silver plate, silverware, flatware, antique flatware, old english flatware pattern, spoon, teaspoon, silver flatware, dining, silver plated, epnns, sheffield silver plater & cutlery, ssp, ssp & c co ltd, 20th century silverware

Imported and sold by Holden and Frost ca1910 for the purpose of saddlery. Sold by Holden And Frost for military agriculture and civilian useNickel plated full buckle equine, military, agriculture, civilian ca1910, buckle full

imported and sold by Holden and Frost during late 19th century and early 20th century for military and agricultural useSold by Holden and Frost c1900nickel plated half buckle equine, military, agriculture, civilian, c1900, half buckle

Used on horse tackle in the 19th and 20th centuries and miported by Holden and FrostUsed and sold by Holden and Frost c1900Nickel plated oller buckle buckle, military, agriculture, civilian

Used on horse tackle during the 19th and 20th centuries and manufactured by Holden and Frost Sold by Holden and Frost c1900 for military and agriculture useNickel plated horse bit equine, military, agriculture, civilian c1900, horse bit

George Kyriakides migrated to Australia on the 1 January, 1948, leaving his home country of Cyprus for the promise of new opportunities in Australia. His silversmith skills were learned from a young age, working with his father to supplement the family income. The Saracen Plate Company was founded in 1952, from small beginnings in the garage of his family home in the Melbourne suburb of Malvern. The business grew quickly and facilitated the purchase of the property at 152 Lygon Street, Carlton. This original dwelling on the site was demolished and rebuilt as both a workshop and living space for the growing Kyriakides family. The business was primarily a wholesale manufacturer and supplied prominent Victorian department stores and Jewellers, such as Myer, Dunklings and Prouds. The Saracen Plate Company specialised in a style of silver plate known as 'Sheffield Reproduction', which featured in many homes as commemorative gifts or serving ware. (Hunter, A. (2017) Saracen Plate Company - Lygon Street Carlton 1952-1974 in Museums Victoria Collections https://collections.museumsvictoria.com.au/articles/15804) The origins of this item is unknown although it was possibly either a gift or purchased by the City for use. Silver plated ice bucket with lion head handles and braided trim. Missing insert.On base; Saracen reproduction. Silver plated. city of greater bendigo corporate gift, george kyriakides

The plate has been used as a school teaching implement in English & Spelling and MathematicsThe plate has been designed for dual use in a school, to tutor children alphabet and mathematical concepts, while at the same time being used as a domestic eating plate.Small white plate with dark green alphabet and numbers around the plate. In the middle there a clock with Roman numeralsOn the back of the plate there is a dark green, round inscription with the words "Trade Mark" " School" and the maker B & K LTDalphabet, counting, plate, numerals, school, clock, roman numerals, crockery

Imported and retailed by HOLDEN and FROST for the use on horse tackle during ca 19/20Sold by Holden and Frost for military, agriculture and civilian use c1910Nickel plated metal cart buckle NILcart, military, agriculture, civilian, buckle

Used on horse tackle during the 19th and 20th centuries and imported by Holden and Frost Sold by Holden and Frost for. agriculture and civilian use c1900Nickel plated roller half buckle equine, agriculture, civilian, military c1900, buckle half

Imported and sold by Holden and Frost for Agriculture military and civilian use c1900Retailed by Holden and Frost for military agriculture and civilian use c1910Nickel plated roller half buckle equine, agriculture, military, civilian ca1910, buckle half

Used on horse tackle during the 19th and 20th centuries and imported by Holden and Frost Imported c1900 and retailed by Holden and Frost for military agricultural and civilian use c1910Nickel plated roller half buckle equine, military, agriculture, civilian ca 1910, buckle half

Imported and sold by Holden and Frost ca1910 for the purpose of saddlery Retailed by Holden and Frost for military agriculture and civilian use c1910Nickel plated roller hobble buckle equine, military, civilian, agriculture, ca1910, buckle

Imported and retailed by Holden and Frost ca1910 for the purpose of saddlery Retailed by Holden and Frost for military agriculture and civilian use c1910Nickel plated hobble roller buckle equine, military, agriculture, buckle

Imported and retailed by Holden and Frost ca 1910 for the purpose of saddlery Sold by Holden and Frost for military agriculture and civilian use c1900Nickel plated bridle roller buckle equine, military, agriculture, civilian c1910, buckle

Imported and sold by Holden and Frost during the late 19th century and early 20th century for use on saddlery Retailed by Holden and Frost for military agriculture and civilian use c1910Nickel plated Bridle roller buckleequine, military, agriculture, civilian ca1910

Used on horse tackle during 19th and 20th centuries and imported by Holden and FrostSold by Holden and Frost for military agricultural and civilian use C1900Nickel plated double snap clipequine, military, agriculture, c1900, double snap clip

Used on horse tackle during 19th and 20th centuries and imported by Holden and Frost Sold by Holden and Frost for military agricultural and civilian use. C1900Nickel plated steel covert snaphorse, military, agriculture, c1900, covert snap

Used on horse tackle sold and used by Holden and Frost C1900Sold by Holden and Frost for military and civilian use C1900Nickel plated steel stirrup buckleequine, military, civilian c1900, stirrup buckle

used on horse tackle during the 19th and 20th centuries by Holden and FrostUsed and Sold by Holden and Frost Nickel plated steel whole buckleequine military, agricultural, civilian c1900, buckle

Used on horse tackle during the 19th and 20th centuries and manufactured by Holden and Frost Sold by Holden and Frost c1910 for military, agricultural and civilian use Nickel plated horse bit with chainequine, military, agriculture, civilian ca1910, horse bit

Used on horse tackle during the 19th and 20th centuries for military useRetailed by Holden and Frost for military use during c1910Nickel plated military horse bitequine, military, civilian ca1900, horse bit