This photograph was taken in February 1984 on the occasion of Cossen's visit to Echuca. P.S Pevensey with the name Philadelphia written across the wheelhouse can be seen steaming upstream under the bridge. This is significant because the P.S Pevensey played the role of the P. S Philadelphia in the movie "All The Rivers Run" which was filmed in Echuca in late 1982 and a sequel was filmed in Echuca early in 1989. Councillor Bob Snow can also be seen on the side deck. This is significant as the Cossen's visit to Echuca may have warranted this sort of attention The photograph also shows the state of the Echuca Moama bridge in the early 1980's.This photograph is significant because it shows the P.S. Pevensey showing the name P.S Philadelphia. The P.S Pevensey was used as the P.S Philadelphia in the TV Series "All The Rivers Run" based on the novel written by Nancy Cato. The TV series was filmed in Echuca in 1982. The TV series was a huge success and still draws tourists to the Port of Echuca. The fact that the P.S Pevensey was showing the Philadelphia name in 1984 is a bit of a mystery, but it has been known that she was dressed up again as the P.S Philadelphia sometimes for special occasions. The Cossen's visit to Echuca might have been such an occasion. It is also a good picture of the pylons under the Echuca Moama bridge and the actual bridge itself. The P.S Pevensey travelling upstream under the Echuca Moama bridge. There is a group of people on the lower side deck. People can also be seen in the wheelhouse and there is a man standing on the back deck as well as one standing next to the wheelhouse. The name Philadelphia can be seen written across the front of the wheelhouse. The river is low and shows the waterline at the Moama Beach. Four bridge pylons can be seen as well as the bridge itself.greenspot photography, p.s pevensey, murray river, echuca, la grue, bill, cossen's visit to echuca., all the rivers run, p. s philadelphia, echuca moama bridge, cossen family, cato, nancy

Cyrus Chambers was a self-described mechanic who started out winding bobbins in his father's woollen mill and went on to invent machines that changed their industries. Cyrus Chambers came from Quaker parents the ninth of thirteen siblings, he once said a year before his death. “I believe I have succeeded because, first, I was industrious; second, because I made a study of the subject that was before me.” At age 7, Chambers went to work in his father’s mill. His job was to monitor bobbins—wooden spindles around which thread was wound and to remove and replace them as they became full. "There was no child labour law at that time," he later recalled. Chambers loved machinery and always regarded himself as a mechanic rather than an inventor. At age 16, Chambers was sent to learn dentistry with an older brother, (Edwin) who was already in the field and willing to take him on as an apprentice. Chambers was talented at working with small parts. He used his brother's dental instruments to build a miniature high-pressure steam engine of silver. It ran at 3,000 revolutions per minute and weighed less than a half-ounce. At that time it was the smallest engine that had ever been constructed. The engine was displayed at the 1876 Centennial and is now in a permanent collection at the Franklin Institute USA. Chambers major invention was the paper folding machine and came from reading that school teachers made less than the young girls who were employed to fold book pages as they came off the press. He told friends that his first efforts were to make the machine that would fold newspapers after demonstrating his device he met with Horace Greeley of the New York Tribune who advised Chambers would never invent the machine that would be able to fold his newspaper or books. In less than a year Chambers had built a full-size machine capable of folding large newspapers and books and was installed at J B Lippincott & Co folding pages for the "Comly Speller" this machine ran successfully for twenty-five years until the printing works burnt down. Chambers then went into partnership with a brother and they established the firm "Chambers, Brother & Co" at a plant in Philadelphia. It was also observed in 1910 and a fact that there was not a periodical or newspaper printed or recently published book that had not gone through one of Chambers inventions. Chambers went on to produce many mechanical inventions and improvements to existing tools and machinery most notable was his invention for the machine that would make clay bricks. This machine made forty bricks per hour and by the end of Chambers life after many improvements, it could make more than four hundred. Although there were a large number of bold cutters made of this patent at Cyrus Chamber’s foundry in Philadelphia, the item is associated with a notable American inventor of the nineteenth century. This particular patent for a bolt and rivet cutter won Chambers the prestigious Elliott Cresson Medal. This cutter is just one of the many inventions and mechanical improvements that Cyrus Chambers made during his lifetime, contributing to the ongoing development of mechanical improvements that were occurring in American industry of the time and therefore a notable addition to the Flagstaff collection.Cast iron bolt cutter with removable tempered steel cutter. Chambers New No. 2.Raised embossed lettering on cast body of cutter "New No 2" on one side, "Chambers Bros & Co" on the other sideflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, cyrus chambers, bolt cutter, paper folding machine, brick making machine, elliot cresson, elliot cresson medal, franklin institute, gold medal, rivet cutter

The John E. Hand & Sons Company was founded in Philadelphia in 1873, quickly gaining a reputation as competent manufacturers of nautical instruments and compass adjusters. In fact, John Enos Hand, the company founder, is recognised as the first man in America to adjust a compass aboard an iron ship. The Hand Company built navigational equipment for all varieties of floating vessels, and operated a chain of retail outlets with “service stations” in numerous port cities, including Baltimore and New Orleans, until 1956. Service stations sold Hand instruments as well as other nautical paraphernalia and provided compass adjusting services. Additionally, John E Hand and his two sons, John L Hand and Bartram Hand, were inventors in their own right who patented design improvements for numerous instruments that were employed in the company’s work. Commercial and private contracts dominated the firm’s business until the late 1930s when the United States military began preparations for World War II. Although the Hand Company never completely abandoned its involvement with private industry, after World War II, military contracts monopolised their business. The Company obtained contracts with the Navy, Coast Guard and Marines to develop new instruments, and to build military-engineered nautical equipment. Of note are the wrist compass, developed for the Navy beginning in the 1950s, and the Mark VII Model 5 Navy Standard Binnacle. Although it moved numerous times, the Hand Company headquarters and factory remained in the Delaware Valley, occupying several buildings in Philadelphia and southern New Jersey. Maintaining its central office in Philadelphia well into the 1900s, the factory was moved to Atco, New Jersey around the turn of the twentieth century and subsequently to Haddon field, New Jersey. It moved one last time in the 1960s to Cherry Hill, New Jersey. In 1997, California-based Sunset Cliffs Merchandising Corporation purchased the Hand Company and all its assets for $100,000. "HAND" brand taffrail log by John F. Hand and Sons Co. Register is enclosed in log, has a glass front and 3 dials on an enameled surface, the first dial registers the miles up to 100, the second registers the units up to 10 mile, the third registers quarters of a mile. The item is rocket shaped with a three blade rotor and a rope ring attachment at one end; the rotor will spin when a rope is attached, allowing the apparatus dials to measure the ship's speed when it is dragged behind a ship. Diagram of the 'Hand' trademark with a compass card in the middle, inscription reads "John F Hand and Sons Co" and "PHILA-BALTO" ( Abbreviation for: Philadelphia / Baltimore) flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, bartram hand, john enos hand, john f. hand and sons co, john l hand, john hand & sons instrument makers, john hand & sons of philadelphia, marine instrument, marine service station, mechanical ship log, nautical instrument, nautical navigation, navigational equipment, scientific instrument, ship log, ship log register, ship’s speed, sunset cliffs merchandising corporation, speed log, rocket log, harpoon log, taffrail log, taff rail log

A tenon saw is a hand tool designed to cut joints and to cut in a miterbox. They are often called "backsaws".A tenon saw. Wooden handled with a rectangular steel bladetools woodwork saw-tenon-backsaw timber

Donated by the Harry Cameron family, Harry's father, James Cameron, came to Bellagoogan on Majors Creek in 1882. Bellagoogan was on Majors Creek near Orbost and was the site of the first race course. Like many other at the time, the Camerons bred race horses.Harry died in 1964 aged 75.Hand saw with a skew-back, steel blade and a wooden handle. It has three metal saw pins and a medallion marked 'warranted superior'. There is a chip carved wheat sheaf decorating the front hand grip. This handsaw is probably a Disston Keystone K-4 Air MasterOn a metal disc around a keyhole is "Warranted Superior".tool timber-industry handsaw

This saw could have been used in industry or in a home situation. It was made by the H. Disston & Sons of U.S.A. This company was established in 1850 by Henry Disston and by the 20th century it was the largest maker of hand saws in the world. The hand saws used today differ little from this early model. This saw is retained as a good example of a hand tool that is over 100 years old. This hand saw has a triangular-shaped metal blade with a serrated edge on the straight side of the blade The handle is wooden with five metal screws. There is a metal plaque containing the name and emblem of the manufacturer. The saw is a little rusty and stained.‘H. Disston & Sons Philada’ ‘T.E.G.’ household tools, history of warrnambool, wood saw

This Bible originally belonged to members of the Orr family who came from Scotland and had a property at Addington near Learmonth in central Victoria (from the 1860s). Many families in the 19th and early 20th centuries had family bibles which were read individually by family members or read aloud to family members, especially on a Sunday. Many of these large-size bibles were used to record family information (births, deaths, marriages), though this one does not have any information recorded. This Bible is retained as a splendid example of a 19th century family Bible. It will be very useful for display. This is a hard-cover book with gilt edging on the pages. It has a leather cover with heavy gold embossing on the front and back covers. Inserted in the embossing are gold religious symbols and images. The Bible contains 45 chapters with the Old and New Testaments and other biblical and religion- related articles. There are many black and white illustrations and some colour illustrations. There is a slight evidence of silverfish damage. ‘Holy Bible’ orr family, family bibles, history of warrnambool

1. Pocket sized book. It has a dimpled leather cover. Colour black. The page ends are gold tinted. There are 568 pages. There is a purple page marker ribbon attached to the book. 2, Cardboard cover that slides over the book. Labelled "ClearNUtype" Testament. The smallest large type testament published. It has a stylistic map of the two hemispheres of the world.1. Inside front cover = "A little token of welcome to Dear Fred, wishing you all the best of luck. Love from Auntie Eva & family 19 Aug 44". On page 351 - Book of Romans - Chapter 5, verses 38 & 39 have been marked & underlined. 2. Äuntie Eva & family to Pte Addlem F E, Neereman, Maldon, Victoria. ww2, christianity

Mrs. Julia (McNair) Wright was an American author and writer of temperance tales. She was born in Oswego, New York on May 1, 1840 and died on Sept. 2, 1903. "The Complete Home" sold over one-hundred-thousand copies. It is an encyclopædia of domestic life and affairs. It takes an in-depth look at the household of the 1870's.This book is a contemporary in-depth look at the household of the 1870's. It reflects the role of women in the Late 19th and early 20th century society.A thick hard back588 pp book with an ornately designed dark brown leather cover. It is a decorative gilt embossed cloth binding. All edges are gilt. There are illustrations of various domestic scenes in gold. Below the title, " The Complete Home" is a sketch of the birth place of Howard Payne. Below this is a sketch of the hearthstone of the author of Home Sweet Home.At the foot of the cover is a banner with "God Bless Our Home" and copyright details. it contains chromolith plates, some in black & white, some in color.inside cover - " Presented by Uncle & Aunt Horne to Catherine Isabella Horne - 10 May 1893 as a token of our affection"julia-mcnair-wright the-complete-home domestic-science-late 19th-century

Ira Remsen was Professor of Chemistry in the Johns Hopkins University. This Third Edition has been enlarged and thoroughly revised. "........deeper satisfaction is to be found in this evidence of the growing recognition of the importance of Theoretical Chemistry as an element of a thorough education, both in Chemistry and Medicine." Ira Remsen, 1887 The book was presented to the Ballarat School of Mines by A Mica Smith on his retirement in 1926.Black/blue cloth, hard covered book, 318 pagesSignature: A Mica Smith on title page. Stamped "Presented to The School of Mines, Ballarat by Professor A Mica Smith, 1926" Stamp at bottom of page "Bailliere, Tindall & Cotheoretical chemistry, ira remsen, professor, chemical compounds, johns hopkins university, a mica smith, ballarat school of mines library, alfred mica smith

Khaki cylinder containing camouflage face paint of light green and sand colours.FSN 8510/161/6202; paint , face, camouflage, stick form.camouflage, sas

Khaki cylinder containing camouflage face paint of light green and sand colourFSN 8510/161/6202camouflage, sas

Brass coloured metal scales with weighing pan, three larger ball weights and one smaller ball hanging from the arm. Metal cast label "H Troemner's Ball Scale No 24". Weighing balance arm has numbers 1 to 6, also 0 to 16 scale (pounds and ounces). Many signatures with dates on the base of the weighing pan, probably of people who worked with the scales (from 1889 to 1988). Used for weighing at J Kitchen & Sonsindustry - manufacturing, j kitchen & sons pty ltd

Small clear (with green tint) square shaped glass bottle.Hire's household extract. For brewing rootbeer at home. Manufactured by the Charles Hires Co.

Armoured personnel carrier used by the Australian Army in Vietnam.ARN - 134253armoured vehicles, military, armoured personnel carrier, m113

Large illustrated Bible with elaborately tooled leather binding. Full page illustrations protected by "tissue" paper. Front and back covers are moulded in relief. Posted illustrations and wording on front and back covers is gilded.Presented to "Mrs D Urquhart" / by "Mr D Urquhart" / "December 7th 1885".urquhart family

Domestic Meat Mincer, Popular in the 19th - 20th CenturyFunnel type feed to a horizontal screw feed mechanism operated by a Hand crank.MFG.Co. Phil'a USA. Patented 5/6/1888

Owned by Mrs Leach9cm mouth grinding chamber 11cm long mince exit diameter disc with exit holes and warning to screw this ring up tight. 11.5cm worm to mince the meat controlled by 16cm handle. Another screw moves to hold the mincer to the kitchen table.Enterprise, on chamber: tinned meat chopper No 5; on clamp: MF'G. CO. Phila. U.S.A..domestic items, food preparation

Yellow Tobacco tin 'Perfection Aromatic Flake Tobacco' written in red.personal effects, smoking accessories, containers, commercial

Long curved stand from clamp to body. Two exposed circular grinders, one with handle, one screwed to hopper.Enterprise M.F.G. Philadelphia.P A. USA. Pat apr 2 Aug 20 & Oct 5 07 'Wet the Raisins' No36domestic items, food preparation

Small New Testament issued to military personnel on enlistment during WW11non-fictionItems forms part of the Trigg Family Collection.